In Windows Mobile 6.1 the sms was now threaded.
Which is good but i have some question
how to display the received time in the sms.cos for now it only show date.
thx
I have the same question.... Maybe show something like 2/13/08 5:32 PM next to each message in the thread would be excellent
I would also like to know how to delete an specific message from a thread. I tried click/hold, but only displays select all. There's no delete option for just one message.. only the complete thread.
Same thing here.. Can't delete specific sms.. the only thing that i can do is to delete the entire thread of sms.. =(
pulsorock said:
I have the same question.... Maybe show something like 2/13/08 5:32 PM next to each message in the thread would be excellent
I would also like to know how to delete an specific message from a thread. I tried click/hold, but only displays select all. There's no delete option for just one message.. only the complete thread.
Click to expand...
Click to collapse
While viewing the thread, use your D-pad (arrows) to select the desired message to delete, it will turn blue, then you can delete/forward/etc.. to that SMS, this is also the ONLY way you can forward a message.
what about searching all your texts? you used to be able to type in anything and search for any text with that word in it. it was so helpful and i dont think u can do it anymore any one know?
thanks for the information, kasush!
i have another question. when in inbox, the choices at the bottom are "delete" and "menu". would it be possible to replace "delete" with "new"?
Is there any way of removing the "threaded SMS" altogether
(i.e. go back to the traditional viewing options??
i did this on the universal but im sure it will work on all devices
Remove Threaded SMS & Return To Traditional SMS
Open a registry editor and navigate to:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\
add a folder "OEM" (without the quote marks)
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\OEM\
add a dword value "SMSInboxThreadingDisabled" (without the quote marks)
and set it to 1
ta-da! you now have traditional SMS
using Mode sms for disabling threaded msg is much easy go here
http://forum.xda-developers.com/showthread.php?t=382548
SMS Folders
I'm unable to create SMS folders in WM 6.1. Option is disabled. It was very easy with Windows Mobile 6
Can´t ENABLE threaded view
I just got an Acer DX900 with WM6.1 pro and I noticed the sms inbox is shown in the old non-threaded view.
I´d like to use the threaded view I had before in my previous HTC phone.
I´ve checked and the registry key (SMSInboxThreadingDisabled) is not present so I don´t understand why the messages are not shown in threaded view.
Any ideas???
how to change number of SMS (is thread view) displaying on one site (default 12) to other number?
SMS for configuring MMS
Hi all,
my provider (t-mobile germany) have a service to automaticly configure internet and mms on windows handys.
he sends a sms, which I have to "install". This worked on my old windows versions. but in the new one, with threaded sms, the question to install the configuration, don't apear.
Do anyone know, how to install this configuration sms?
greetings from germany.
Harry
The easiest way to change your sms from threaded to the original (classic) individual messages is to go your system settings (start menu, settings, system tab). There should be an icon for text messaging, in there you can switch between classic and threaded.
kingsizeriz said:
i did this on the universal but im sure it will work on all devices
Remove Threaded SMS & Return To Traditional SMS
Open a registry editor and navigate to:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\
add a folder "OEM" (without the quote marks)
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\OEM\
add a dword value "SMSInboxThreadingDisabled" (without the quote marks)
and set it to 1
ta-da! you now have traditional SMS
Click to expand...
Click to collapse
Nice Job dude!!
Related
Hi
The O2 Active rubbish that comes on the XDA IIs allows you to go straigh to your pop3 inbox via a link in its menu. When I use the hardware email button on the front, it starts up inbox, but it aint my pop3 inbox its the default outlook inbox.
Is there any way of assigning custom actions to a hardware button? Such that pressing the email button pulls up pocket outlook pointing at my pop3 inbox??
Also, whats the best registry editor prog for windows mobile 2003 devices?
Nigel
Found this: http://smartphonedn.com/forums/viewtopic.php?p=2311&sid=792bf7b2b0944c610a5f683878c821e8
But was hoping not to have to write a bl00dy launcher just to get it to point at my inbox!
Nigel
Sorted for anyone who is interested
Hi
Sorted this. For anyone whos interested:
Use activesync to copy the file \Windows\AppButtons\Messaging.lnk to your PC. Edit the file with notepad. You could also edit it on the device, but I prefer a decent keyboard!!
The Messaging.lnk file will read something like:
19#"\Windows\tmail.exe"
Change it to read something like
19#"\Windows\tmail.exe" -service "ServiceName"
The number on the front (in my case #19) should be kept the same as it is currently on your device.
ServiceName could be: Text, MMS, MyPopAcc, blah blah.
There are a load of parameters for tmail.exe by the looks of it. One site that claimed to list them was down/dead.
Save the modified file and copy it back to your device. Now when you hit the 'email' hardware button you'll get the service you mentioned as a default.
You can also stick -attatch on the end i.e:
19#"\Windows\tmail.exe" -service "ServiceName" - attatch
But I found that this did nothing with email. Maybe with MMS etc.
If anyone knows any of the other commands for tmail, pls post!?
Nigel
If, after changing the file in App Buttons it still launches the messaging pointing at the wrong folder, do the following:
Close the messaging app (completely) from settings --> system --> memory --> Running Programs.
Then goto Settings --> Personal --> Buttons, and change button 4 from messaging to some other program. Tap OK, use the messaging button to start that other program, quit said program, go back into Buttons, and change button 4 back to messaging. Try to launch messaging.
It must cache the old info somehow.
Nigel
i believe you'll find the short cuts is set in the registry and doesn't use the program thats selected on the buttons controle pannel item
Nope, it definately uses the stuff in appbuttons! Perhaps these get read and copied to the registry, dunno, but changing the prog in the appbutton shortcut changes what gets launchen when you hit the hardware button.
Nigel
And, if you want to delete the entire crappy outlook/activesync account try removing the appropriate folder (dunno what it's called now, lol) from:
LOCAL MACHINE/SOFTWARE/Microsoft/Inbox/Svc/
edit - Incidentally, the new i-mate ROM always starts the messaging client in the 'last viewed' account anyway.
Chris.
LOCAL MACHINE/SOFTWARE/Microsoft/Inbox/Svc/
Click to expand...
Click to collapse
Dont trash the outlook key in here. If you do then you will indeed, loose 'outlook' folder in the inbox app (good!), but as a side effect, sms notify will also stop working (unit will not make noise and display part of message when sms received) (bad!)
Nigel
19#"\Windows\tmail.exe" -service "Text"
Worked first time for me - takes me straight to my SMS inbox
Cheers!!!!!
Since builds of Windows Mobile 6.1 Standard are starting to show up on various devices, it may be a good idea to have a thread here with common registry settings.
Enable/Disable Recipient Address AutoComplete in SMS
To enable the new recipient address suggestions feature in the SMS application, go to HKLM\System\Inbox\RecipientAutoComplete and set/change the following DWORD:
MaxSuggestions=4 (for example)
http://forum.xda-developers.com/showpost.php?p=2009900&postcount=105
To disable suggestions, change the value to 0.
Disable/Enable Threaded SMS
If you want to disable the new threaded SMS feature, go to HKCU\Software\Microsoft\Inbox\Settings\OEM\ (create if necessary) and edit/create the following DWORD:
SMSInboxThreadingDisabled=1
http://forum.xda-developers.com/showpost.php?p=1956465&postcount=1
To re-enable, delete the value, or change to 0.
chp said:
If you want Auto Complete function in "To:" field in SMS app, go to HKLM>System>Inbox>RecipientAutoComplete and change value of the string MaxSuggestions. from 0 to 4 for example
http://forum.xda-developers.com/showpost.php?p=2009900&postcount=105
Click to expand...
Click to collapse
Great tweak!
but may i just add that MaxSuggestions should be a DWORD
chp said:
If you want Auto Complete function in "To:" field in SMS app, go to HKLM>System>Inbox>RecipientAutoComplete and change value of the string MaxSuggestions. from 0 to 4 for example
http://forum.xda-developers.com/showpost.php?p=2009900&postcount=105
Click to expand...
Click to collapse
Sorry oldsap, I didn't see that you already pointed out the DWORD issue.
default mailto
Is there a way to set the default mailto on a WM6.1 smartphone to a 3rd party email client? I tried with a registry tweak that works on a WM3se PPC, but on the smartphone it interferes with the text messaging link. Thanks for any help...
any idea how to use registry to disable the camera?
chp said:
If you want to disable the new threaded SMS feature, go to HKCU\Software\Microsoft\Inbox\Settings\OEM\ (create if necessary) and edit/create the following DWORD:
SMSInboxThreadingDisabled=1
Click to expand...
Click to collapse
Sorry for lack of knowledge but were would i find the place to enter/type this data in?
You need some registry editor. One that you can use it Total Commander, which is freeware.
I'm looking for bluetooth/AudioGateway settings.
I found only this link http://msdn.microsoft.com/en-us/library/aa915920.aspx, but this rules could be valid only for windows CE,
chp said:
To enable the new recipient address suggestions feature in the SMS application, go to HKLM\System\Inbox\RecipientAutoComplete and set/change the following DWORD:
MaxSuggestions=4 (for example)
http://forum.xda-developers.com/showpost.php?p=2009900&postcount=105
To disable suggestions, change the value to 0.
Click to expand...
Click to collapse
I don't have "RecipientAutoComplete" in the HKLM\System\Inbox section. Do I create it? If so, what settings?
Thanks, I've been looking for this for a while.
will this also work in wm6? i has this working at one time.
how to disable/enable sending SMS
how to disable/enable sending SMS in reg.file My phone is LG KS20
has anyone figured out how to disable the new email account wizard? I'd like to input my settings manually because the wizard defaults to POP3 and I use IMAP on my devices.
TIA
bnycastro said:
has anyone figured out how to disable the new email account wizard? I'd like to input my settings manually because the wizard defaults to POP3 and I use IMAP on my devices.
TIA
Click to expand...
Click to collapse
when you go to setup your email, put in a bogus email (ex.. [email protected]) it will cause the wizard to ask you for all your settings.
chp said:
If you want to disable the new threaded SMS feature, go to HKCU\Software\Microsoft\Inbox\Settings\OEM\ (create if necessary) and edit/create the following DWORD:
SMSInboxThreadingDisabled=1
http://forum.xda-developers.com/showpost.php?p=1956465&postcount=1
To re-enable, delete the value, or change to 0.
Click to expand...
Click to collapse
Just the perfect one i was looking for!!! Works fine! thanks..
whiteblazer01 said:
I don't have "RecipientAutoComplete" in the HKLM\System\Inbox section. Do I create it? If so, what settings?
Thanks, I've been looking for this for a while.
Click to expand...
Click to collapse
I have the same problem. lol. Can I just make it?
NM, I use PHM Registry editor and added a new key, and then created a DWORD value and set it to 4.
I then rebooted my device and tested it out by making a new SMS message, it works like a charm!
change today screen lines
i dont wanna disable the grey lines i already did that
anyone know how to allow rss feeds on today screen to be multiple lines? im thinking its for sure a registry change because date single line is in the registry under HKLM\software\microsoft\today. but rss cuts off and i cant read the rest of the title
thanks
u guys has any great themes ?
in wm6 when i went into messages/sms/inbox there would be a complete list of messages sent to me and they would be individual irrespective of where they came from.
now in wm6.1 there is a list of received messages but if i get another message from the same number it puts it inside itself and calls itself
"conversation with" so if you click on a message from 12345 it opens up loads of other messages from 12345.
when inside you can't delete individual messages but you can delete the first message in the inbox but then that deletes all messages in its sub folder.
my question is simple...can anyone advise how i can go back to using the wm6 version of messages/inbox?????
i know theres a boffin out there with the answer
Yep - take a look here and install the "Disable SMS threading" cab file
Hope this helps
http://forum.xda-developers.com/showthread.php?t=372263
Nick
scottydog90 said:
in wm6 when i went into messages/sms/inbox there would be a complete list of messages sent to me and they would be individual irrespective of where they came from.
now in wm6.1 there is a list of received messages but if i get another message from the same number it puts it inside itself and calls itself
"conversation with" so if you click on a message from 12345 it opens up loads of other messages from 12345.
when inside you can't delete individual messages but you can delete the first message in the inbox but then that deletes all messages in its sub folder.
my question is simple...can anyone advise how i can go back to using the wm6 version of messages/inbox?????
i know theres a boffin out there with the answer
Click to expand...
Click to collapse
Do a SEARCH with the subject "Disable threaded message"
orb3000 said:
Do a SEARCH with the subject "Disable threaded message"
Click to expand...
Click to collapse
Or, you could get off your high horse and help the poor geezer.
thanx dontpanic you are elevated to a god like status in my eyes.....
only upgraded the rom 4 days ago and didn't know this particular thing was called "sms threading" (thats why i couldn't do a search orb3000) i just knew it was bloody irritating..found the cab as you helpfully advised and it works tip top so i'm a happy bunny again.....(amazing how the little things bug us)
Hehe! Its the first CAB I install on a new 6.1 ROM
Simple switch ...
This is how I did it:
Goto --> start-settings
Then click on the "system" tab at bottom
Look for "Text Messaging" and select
Here you can change from "Threaded" to "Classic"
Hope this helps .
Justjim.
Hey friends
Is there any possibility that to change the default sms manager with vito smschat app?
ThreadMoved
Thanks for warning and still waiting the answer
you want to load vitosms when you click on Messaging instead of loading Poutlook?
nir36 said:
you want to load vitosms when you click on Messaging instead of loading Poutlook?
Click to expand...
Click to collapse
Yes i want vito sms as default
Me too
Hey all,
I'm looking for the same answer. I'm running DCD 3.3.4 and cannot get threaded SMS to work, though Vito Chat works well. Vito will intercept any incoming SMS, but I want to use it with my HTC Home and cannot figure it out.
Thanks in advance, F
mortscript can help you with this.. if you want to change the default messaging app.
i suggest you search in the MortScript Examples thread..
http://forum.xda-developers.com/showthread.php?t=289197
if you can't find a script for this there, you can post a request in this section for a script to change it... i'm sure someone would help you out.
You must have a registry editor!
go to:
HKLM\Software\Microsoft\Shell\Rai\:MSINBOX
in the string "1" write
"\Program File\VITO\SMS-Chat\SMSChat.exe"
ps. you have to write the "
gfandrea said:
You must have a registry editor!
go to:
HKLM\Software\Microsoft\Shell\Rai\:MSINBOX
in the string "1" write
"\Program File\VITO\SMS-Chat\SMSChat.exe"
ps. you have to write the "
Click to expand...
Click to collapse
Hi, i test this way but it doesnt work for me, i can see in the string "0" the word TMAIL its mean something ?? i hope your opinion my friend
hi!
i have TMAIL in 0 to...
i dont now why it doest work for you... check the spelling in 1, and remember to add the "
and if you installed vito sms chat on storage card you have to change the link...
gfandrea said:
hi!
i have TMAIL in 0 to...
i dont now why it doest work for you... check the spelling in 1, and remember to add the "
and if you installed vito sms chat on storage card you have to change the link...
Click to expand...
Click to collapse
It worked for me (Thank you) with TWO DIFFERENCES:
- I didn't write the ""
- I have a German ROM so the path is \Programme\VITO\SMS-CHAT\SMSChat.exe
CU
Hi, i try again this configuration, but it doesnt work, i try with "" amd without "" and nothing, i have instaled the program in my HTC no in the storage card, but i see when i write this the messaging icon change like undetifine, well i hope others suggestion and thanks for your help.
Note: could you show some images, i wanna sms-chat by default for work to spb mobile shell 3
I post a screenshoot! hope will help
BTW in my ppc mobileshell point to vito sms chat with this change on the registry!
This .reg hack works for me with the "" but the path is \program files\ (with an s) not \program file\, so check that if it's not working for you.
And thanks grandrae, this make ms3 just a little better. Do you know any other ms3 .reg hacks? I would like to launch g-alarm from my clock.
Hi, i have a HTC Titan, and i am using SPB Mobile Shell 3, when i try this register change and i press the SMS botton nothing happens, my vito sms-chat is no default sms program, i check letter by letter all its ok, but i dont know why dont works for me, y wait yours tips please..!
uniqueboy said:
This .reg hack works for me with the "" but the path is \program files\ (with an s) not \program file\, so check that if it's not working for you.
And thanks grandrae, this make ms3 just a little better. Do you know any other ms3 .reg hacks? I would like to launch g-alarm from my clock.
Click to expand...
Click to collapse
This is not a mobileshell 3 hack... you change the default sms manager for all the windows mobile system, i dont now ms3, so i dont now other hack for it, sorry.
imohtep said:
Hi, i have a HTC Titan, and i am using SPB Mobile Shell 3, when i try this register change and i press the SMS botton nothing happens, my vito sms-chat is no default sms program, i check letter by letter all its ok, but i dont know why dont works for me, y wait yours tips please..!
Click to expand...
Click to collapse
If when you push the sms button, nothing happend, the problem is that you write wrong the path to sms chat; check if it work with or without te " and if you have sms chat installed in an other directory.
Partially working
Hi. I'm also using Spb Shell 3, and it is starting Vito SMS very well. It's just a matter of making sure that the app path is ok. As a suggestion, what I use to do is in the PC with Windows Explorer I navigate all the way to the executable, and the copy the path from the explorer and paste it on the registry (directly on the phone via MyMobiler, or on the PC using CERegEditor). So, on the main screen, when I press the SMS button it goes directly to SMS-Chat.
What is not working is, when I go to the Contacts panel and press the "Send SMS" button, it goes to the app, but not directly composing a message, so I have to browse and select the contact. Is it possible to start composing directly from the contact panel?
Thanks in advance.
rafaelegomezb said:
What is not working is, when I go to the Contacts panel and press the "Send SMS" button, it goes to the app, but not directly composing a message, so I have to browse and select the contact. Is it possible to start composing directly from the contact panel?
Thanks in advance.
Click to expand...
Click to collapse
This may or may not work for the Contacts panel, but try modifying the registry key and append open:%s outside of the quotes.
HKLM\Software\Microsoft\Shell\Rai\:MSINBOX
1 -> "\Program Files\Vito\SMS-Chat\SMSChat.exe" open:%s
Seemed to work for me in MS2 Contacts. The unfortunate side-effect of doing this though, is when you select the SMS icon on the Now screen, it goes to the compose window (and addresses it to some unknown string like "Service...").
i changed this registry entry
HKLM\Software\Microsoft\Shell\Rai\:MSINBOX
1 -> "\Program Files\Vito\SMS-Chat\SMSChat.exe"
from the now screen it opens sms-chat(good)
from the contacts it opens sms-chat(good)
from the map messages in spb3 when i select messages it selects sms-chat(good)
from the map messages in spb3 when i select compose new message it selects THE ORIGINAL WM program NOT GOOD.
were is that second entry located in the registry?
it seems 2 entries are used, one for messages and one for compose new message
Hi,
I need a little help please.
I'm using a default WM sms app. When I want sent a sms message for example to John Silver, I must tap on "To:" button on address line, and choose him form contacts.
In the past, I had another ROM, I used also default WM sms app. When I want send a sms to John Silver, I could start typing his name, or any part of it, and WM sms app offer me contacts, which was relevant.
Please, does anyone know, how can I turn on this function in WM sms app? Or why it simply doesn't work.
Thank you.