I have just unlocked my tilt with Kaiser SimUnlocker. I put my T-Mobile sim card but no connection. Always searching... I put my friends Cingular sim card (old at&t) and still no connection. So I thought my phone was broken so I took it to local AT&T store and one of the rep says 'maybe it's the sim card'. And he grabs one of his new AT&T sim card and voila! connected. Have anyone had that problem? What can I do to fix this? My T-Mobile sim card is says 38.01e on the card next to my sim serial number. Is it my sim card? Do I have to get a new sim card? I've just got this sim card about 2 months ago. Any suggestion?
I assume you reflashed an appropriate radio after unlocking?
I would try flashing a new radio anyway to see if that sorts your problem.
I've tried severa different radio roms with no luck. Right now I've reflashed back to US At&T rom. I still no clue why my T-Mobile sim will not connect to the network...
On AT&T, the tilt requires the newer AT&T 3G cards - thus probably why the Cingular card didn't work. Are you sure the SIM unlock process worked for you? If your T-mobile SIM is that new, I can't imagine you needing a new T-Mobile SIM. The T-Mobile SIM has worked in another phone?
Guilf said:
On AT&T, the tilt requires the newer AT&T 3G cards - thus probably why the Cingular card didn't work.
Click to expand...
Click to collapse
That's strange b/c my Cingular card works on my tilt.
I unlocked my AT&T Tilt and then put in my (almost 1 year old) t-mobile sim card and it worked immediately without any problems. I used the original radio as directed in the unlocking tutorial. So it sounds like maybe you should do the unlocking procedure again. ?
Hope this helps,
stacy
did you even try putting ur sim into another phone and see if it works? just making sure u covered everything here
Maybe you are locked into 3G
Go under Phone/Options/Band and make sure the top is either set to Auto or GSM
Thanks for all the replys...
I have tried just about everything...
I know it's unlock b/c it does not ask for unlock code no more. I have hp hw6945 that is also unlocked and works perfect in there. It connects almost instantly so I know my sim card works too. Also tried changing band setting to Auto and 900/1800 and everything and no luck... Going crazy and frustrated... about to just sell it to some at&t user and buy a new one, try again.
Just to let you xda'ers know that when I tried to unlock it for the first time I tried with spl-1.56 on it as a factory (dummy me) then tried SuperCid unlock which changed to spl-1.0 then proceded with rest of the unlock. Maybe that messed something up?
I've had that issue but my sim card with t-mobile was 4 years old. Had to purchase a new sim card and everything worked fine after that. With my old sim card, the tilt wouldn't even recognize the card.
Anybody want to donate an old T-Mobile SIM to me
buddy had same issue just happen.. he had to go to tmobile and show them the sim wasnt working they gave him a new @ no charge
I had a old cingular card that came with my Razr and it worked fine in my 8525 Hermes, but it said no service in my 8925 tilt. I would try a new t-mobile card.
Related
hi
i have a tmobile sim card and a virgin simcard.
i first got it off ebay with no tmobile simcard so i application unlocked it with success.
then i tried to simunlock it and it dident work
i then tried to set the cid to 11111111.............nothing happened.
i got a tmobile sim and locked the phone on the spvdevelopers tool..........and that dident work.
i am really annoyed with this phone due to its incapabilities and i would love to fix it so i can sell it.
if anybody could help that would be great?
maybe i could hard reset the phone to restore the settings(i dont know how to do this)
cheers
My dad has an At&T tilt (htc kaiser). He unlocked it and we are trying to get it to work in Israel with a cellcom sim card. The sim card in my phone is working in his phone, but the new sim he bought for his phone only works in a slvr l6 we have. On the kaiser, the sim is recognized, but it won't connect to the cellcom network (it does with my cellcom sim card). Do you think upgrading the rom would help the problem (he still has the original rom that came with it from at&t, and he has paid them and unlocked it) and if so, which ROM for the kaiser have you found to be the best for you. If I flash it, will it work fine in the US and in Israel, etc? Now that it is unlocked, is it for good even after reflashing it? If you don't think the rom is the problem, do you have any other suggestions as to why one specific sim would only work in one phone? All suggestions are welcome!!!
ok first thing the rom has nothing to do with that flashing it wont help, what you need to find out is what band that company uses and then select the ban from your phone and that will allow the phone to work if it still dont pick up ur phone wasnt unlock properly, remember it takes a little time to pic up its not as quick as the other phones. If you still choose to flash ur phone you need to read some of the threads first and make up ur mind based on the comments made. but personaly they all are good to me some have a few ups and down but nothing major or you can use the orginal rom posted by dutty a few days ago its stable.
Thanks for the response. This is the weirdest problem I have ever encountered, because my phone (an l6) uses the same sim from the same company (cellcom) and my sim card works perfectly in the kaiser. The new sim card does not work in my l6 OR his kaiser, but works in my mom's cheapie unlocked phone and another (a bit newer) l6 (same model phone!) that we have with us. So connecting to the network is not the problem, as the kaiser does that with my sim in it. But with the new sim in it, the kaiser refuses to connect to the cellcom network. I have no idea where to go from here. Why does it work in one l6 and not another? Why my old one work in my l6 AND his kaiser, but the new sim works in neither? All help is greatly appreciated!!
Yesterday I posted about the change of the IMEI on my Tilt, but it was said that even if there are two numbers more in the serial it's ok anyway, and matters only the first 15 numbers in the IMEI serial.
That's ok.
(Even if I don't understand why the moderator kyphur close that thread, as I see and read so many stupid thread from newbies asking so stupid questions without sense and clearly posted without taking a look and search in this forum before posting!!..... BTW......)
My problem is that after upgrading from Dutty's v4 to Dutty's WM6.1 Build 5.2.19716 my Tilt doesn't recognize my SIM card (and before the upgrade it did) (BESIDE checking the IMEI changed with 2 digit more)
My Tilt was legally unlocked with the AT&T code they sent me after my request.
Now I'm in Italy since 3 weeks and I was using an Italian SIM from an Italian carrier.
Before upgrading to a WM 6.1 rom (and 6.1 radio) my legally unblocked Tilt worked perfectly and so fine...
Now it doesn't see my SIM card at all... it says SIM MISSING.
I tried this same SIM in other cellulars and works fine, and I tried other different italian SIM cards in the same Tilt and they work!
Maybe my Italian SIM is, in a certain sense, not perfectly compatible with a WM 6.1 based rom?
Should I ask to the carrier to change my SIM to something different and newer?
Could be this one the problem that the Tilt doesn't recognize and see my italian SIM?
I tried to return back to a WM6 rom and radio BUT THE TILT doesn't yet recognize the SIM. (and I'm repeating that before the upgrade, till 2 days ago it was perfect!)
(....and I would not be a pain in the ass.. but everything go bad after noticing that the emei has changed... and I'm underlining this because it is important in the official process to legally unblock the Tilt from AT&T procedure)
AGAIN....
What's happening?
Any suggestions?
Could someone tell me if you encountered a problem like this before?
[email protected]! said:
Yesterday I posted about the change of the IMEI on my Tilt, but it was said that even if there are two numbers more in the serial it's ok anyway, and matters only the first 15 numbers in the IMEI serial.
That's ok.
(Even if I don't understand why the moderator kyphur close that thread, as I see and read so many stupid thread from newbies asking so stupid questions without sense and clearly posted without taking a look and search in this forum before posting!!..... BTW......)
My problem is that after upgrading from Dutty's v4 to Dutty's WM6.1 Build 5.2.19716 my Tilt doesn't recognize my SIM card (and before the upgrade it did) (BESIDE checking the IMEI changed with 2 digit more)
My Tilt was legally unlocked with the AT&T code they sent me after my request.
Now I'm in Italy since 3 weeks and I was using an Italian SIM from an Italian carrier.
Before upgrading to a WM 6.1 rom (and 6.1 radio) my legally unblocked Tilt worked perfectly and so fine...
Now it doesn't see my SIM card at all... it says SIM MISSING.
I tried this same SIM in other cellulars and works fine, and I tried other different italian SIM cards in the same Tilt and they work!
Maybe my Italian SIM is, in a certain sense, not perfectly compatible with a WM 6.1 based rom?
Should I ask to the carrier to change my SIM to something different and newer?
Could be this one the problem that the Tilt doesn't recognize and see my italian SIM?
I tried to return back to a WM6 rom and radio BUT THE TILT doesn't yet recognize the SIM. (and I'm repeating that before the upgrade, till 2 days ago it was perfect!)
(....and I would not be a pain in the ass.. but everything go bad after noticing that the emei has changed... and I'm underlining this because it is important in the official process to legally unblock the Tilt from AT&T procedure)
AGAIN....
What's happening?
Any suggestions?
Could someone tell me if you encountered a problem like this before?
Click to expand...
Click to collapse
I know this is going to sound dumb as hell, but it worked for my brother's phone and maybe it will work for yours.
Remove the sim card and using a brand new pencil w/ new eraser, press the eraser against the brass contacts on the sim card and erase as though someone colored them all. Then reinsert sim card and see what happens. Once again, I am not saying this will work, but I am saying that my brother's blackjack lost contact with his sim card and this is what he did and everything worked again.
Just a shot in the dark, but maybe. Hope it helps and good luck.
While I have not heard of this happening to non-US SIM cards, I went through this problem with my older Cingular SIM card and my 8125.
Everything worked perfectly fine until I loaded WM6 onto the device, and then all of a sudden I needed to get a 3G SIM card from Cingular, even though the 8125 was Edge/GPRS capable only.
I would suggest getting a replacement SIM card from you Italian carrier.
P1Tater said:
I know this is going to sound dumb as hell, but it worked for my brother's phone and maybe it will work for yours.
Remove the sim card and using a brand new pencil w/ new eraser, press the eraser against the brass contacts on the sim card and erase as though someone colored them all. Then reinsert sim card and see what happens. Once again, I am not saying this will work, but I am saying that my brother's blackjack lost contact with his sim card and this is what he did and everything worked again.
Just a shot in the dark, but maybe. Hope it helps and good luck.
Click to expand...
Click to collapse
Thnx P1Tater for the easy "handyman-like" suggestion.
I tried it, but it doesn't work and defenitely it's not my case.
NotATreoFan said:
While I have not heard of this happening to non-US SIM cards, I went through this problem with my older Cingular SIM card and my 8125.
Everything worked perfectly fine until I loaded WM6 onto the device, and then all of a sudden I needed to get a 3G SIM card from Cingular, even though the 8125 was Edge/GPRS capable only.
I would suggest getting a replacement SIM card from you Italian carrier.
Click to expand...
Click to collapse
Yes.. I'm thinking to do so.. maybe my Italian SIM card is not good after this upgrade to WM 6.1 and it's not 3G. I cannot confirm, but very probably it's like so.
I'm asking my (old and, in the same time, temporary) italian provider to change my SIM to a newer one... and then we will see what happen.
It's very strange how with WM 6 It was simply PERFECT and after this upgrade to wm6.1 the sim is not recognized.
oh... I wanna add that when I insert the AT&T SIM the Tilt regularly see it.. even if, obviously, there's no signal and no services available.
I resolved the problem getting a replacement SIM card from the Italian carrier.
SO the bottom line is that with some old SIM card upgrading to Windows Mobile 6.1 based ROM the AT&T Tilt doesn't work!
You MUST HAVE a new SIM CARD 3g capable.
i upgraded to wm 6.1 and now it says my sim is missing. it never used to do it. i have the 3g sim card. can anybody offer anything? i cant seem to find anything.
thanks!
alex
guitargod666 said:
i upgraded to wm 6.1 and now it says my sim is missing. it never used to do it. i have the 3g sim card. can anybody offer anything? i cant seem to find anything.
thanks!
alex
Click to expand...
Click to collapse
I have the same problem before. When I upgraded to the 3.34 ROM as I post http://forum.xda-developers.com/showthread.php?t=439408
Kaiser says the sim card is missing, but I do have the sim card inside. What I been done is open the sim card door while the kaiser is power on, it will shut down by they self, then close the door. Power on again then it read my sim card. It work in my case I am not sure about yours.
Anyone else experience issues with swapping their SIM from their old phone into the G2X? I have reseated mine from my N1 into the phone 3 times, and each time I boot it says I have no SIM card. Pulling my hair out!
I went from an N1 to the g2x and i had the same problem so here is the deal...
the g2x is a 4g phone and it required a new sim card version so i had to trade in the sim card that i have had since my i got my razr in 2005...
so disclaimer to anyone who buys the phone outright, you have to have an updated sim card... just go into tmobile and they will give you one...
mines wont check for sim card at all it keep saying no service even without a sim card it usually say no sim but it just say no service can someone help plz plz plz
Fyi make sure it is a corporate store. Otherwise it could cost ya $20. Customer care might even be able to mail you one...not sure. If your near Chicago I would just give you one of my extras.
Sent from my LG-P999 using XDA App
I reused the sim from my N1 and have had no issues but it was probably a newer version sim since I just got it beginning of last year.
If you have an old T-Mobile phone lying around, try inserting your SIM into that, and using it, then re-insert it into your G2X.
Alright I opened it up and it looked like the antenna cable was a bit frayed near the tip, I attached a few pics. It was connected though so not sure :/
http://imgur.com/i2oH9,5LnGx,n97wZ ( three images)
I have the same issue.
Mint condition G2X does not detect my sim card reads "error while trying to connect to network"
I am running CM 7.2 I have wiped everything and reflashed still no luck.
Add one more to the pile...
I also recently began having this problem, but my device previously worked fine.
I have tried Restoring to Factory V21Y with Mar 11 Baseband
Flasing a GB Based ROM & Stock Kernel
Flashing CM9
Flashing CM10
Entering *#*#INFO#*#* Phone Info and modifying frequency band (No Go).
At one point I was able to read the Phone # from the SIM card, but couldn't get a lock on Netowkr. I can visually detect T-Mobile and ATT in Mobile Networks.
I have tried this with 4G Enabled SIM Cards and older T-Mobile SIM Cards.
I have tried Simple Mobile, Straight Talk, & ATT SIM Cards.
I have tried using None APN's, the TMo/Simple Default APN's, and Modified APN's for Straight Talk & Family Talk.
No avail.
Any ideas?
I had the same problem. A new SIM card fixed it.
RE:
Core Memory said:
I had the same problem. A new SIM card fixed it.
Click to expand...
Click to collapse
I gave my friend my old G2x because she was switching from AT&T to TMobile. She went to the TMobile store and got a new SIM card and her old AT&T number transferred to it. It works on her old iPhone but when I insert the SIM card on the LG G2x , it keeps saying 'no SIM card inserted'....do i need to flash a certain baseband on it and/or setup a custom APN for it? I am on the stock ROM thats rooted...
Any help is much appreciateed
Sorry for not replying until now but I rarely visit here anymore. My G2X had a bad Sim card which a new Sim fixed. I just had to wait until the network could authorize with it.
New guy here.
I recently purchased an AT&T i727 with the plan to use the bring your own phone program with straight talk. Even with the sim card activated, the phone reads "No Sim Card. Emergency Calls Only". I've used the sim card in other phones, so I know it's functional. I've rooted the phone and installed different roms, but I still get the same error. I can't edit any of the APN or network settings because it tells me I need to have a sim card inserted to do so.
I feel like I'm not super clueless at things like this, but I've done everything I know how to do. Any help is greatly appreciated.
Take it easy on me guys.
Thanks in advance
Sound like the phone isn't unlocked. There is a thread here on how to unlock it for free. Look in the general section.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Assuming the ST SIM is at&t SIM card , and it was working before , the problem might be somewhere around your phone , either SIM card slot , bad radio or blocked-from-network Skyrocket ... is it a craigslist phone ?
It is an AT&T compatible ST sim. I've already entered codes to unlock it and they all said the unlock was successful.
I actually purchased the phone on eBay. (I'm sure everyone will laugh upon reading that)
If the sim card works in other phones and doesn't work in your skyrocket but you have it in the correct way in the sim slot then it's gonna be your sim card slot. With ST your phone doesn't have to be unlocked for the sim card to work in it. Trust me on that I'm using my skyrocket on ST and have used about 10 different AT&T phones on ST and none of them were unlocked until I sold them. You'll need to get ahold of eBay and paypal (who you hopefully used) and try and get your money back. Otherwise you have a really expensive mp3 player.
Sorry for the bad luck but that's what it looks most like to me. I used to work for AT&T and that's the logical problem. I would say try and get a warranty for it but I doubt it still has a warranty and even if it did AT&T and Samsung wouldn't do anything about it because a problem with the sim card slot is considered physical damage. You'll just have to try and get your money back for the phone.
Just my advice and $.02