Related
I'm running Faria's final edition of WM6 on my Wizard, pretty much stock except for mun's keyboard and a few apps. This rom is almost perfect for my needs.
The only problem is that when the wizard is connected to my computer USB port to charge, it won't go to sleep... In fact, if I press the power button, it turns off for maybe a minute then turns right back on again!
I searched the forums looking for an answer and came up with very little. I do recall seeing some tips for preventing this behavior several months ago but can't seem to find the post anymore (???).
Actually I had this issue fixed on this rom at one time, but then I went and re-flashed about 20 times, trying all the latest cooked versions out there before returning to Faria's. But now I can't recall the fix for the power-on problem!
So, could someone help me out and re-post the fix?
Many thanks in advance...
Don't know of a fix, but this happened to me also when using Faria's ROM and still happens now using the NBD ROM.
Have same problem with Core 2.0n
Same with my XDA ROM. I thought thats a WM6 feature that I have to live with.
It's a common problem then...
Ok, this sounds like a common problem then.
I've been thinking about it, and if I recall, I think the posted fix might have been from mrfrazz or dr puttingham... I'll try to PM them (not that they know me) and see if I can get them onto the thread....
Wasn't from me.
Ok thanks for that mrfrazzz.
How many folks have this problem? Does anyone have a fix?
Sorry, not from me either.
remove the pin password (start -> settings -> lock). used to solve this problem for me on older WM6 rom's. Don't know if the problem still exists in the newer roms...
nbd 7.4 has this problem and also wm6 business edition.
I am using the Dopod Pro 838 [Mobile 5] and have the same issue, when connected it does not sleep, no matter how many times I close the screen off
Thanks everyone for chiming in. So this is a widespread problem.
Is there a solution? Or is everyone just living with it?
For what it's worth, I've searched and searched and can't find that post with the solution. The only reason I can think of is that the post was removed. (?)
Oh well. I guess I'm going to have to live with it like everyone else until an answer turns up. If anyone has any info or ideas post here and we'll try it out.
WM6 TNT 3.0.... same problem
settings, system, backlight settings?
i'm using an enhanced xm6 and i don't seem to have this problem when i charge with the usb at work (no activesync installation). perhaps you may need to disable that, because i recall reading somewhere that activesync tends to wake the phone from time to time to constantly resync pim information.
if you don't like the backlight on, you can go to settings, system, backlight, and change the settings there. I know on faria's roms, the backlight goes off after some time, even when it's plugged into the usb. t-mobile's default rom and the one i'm currently using don't turn off, unless i hit the power button. (but unlike what was initially stated, my phone doesn't turn back on).
or in case i've misinterpreted something...i recall reading that in some roms, the phone would keep waking up due to the push service and it would require some combination of locking the phone to get it working. in those cases, i believe you have to read the respective rom thread. i know farias "the real thing" thread has info on it.
Thanks for the suggestions, I'll look into somehow getting better control over activesync.
Yeah, that's about where I'm at, just turning off the backlight and pretending the phone is off. But it still kind of irks me, all I want is for the phone to sync then go to sleep until I need it. And stay off when I hit the sleep button...
I've had this problem forever, and I consider it a "problem" because my phone is overclocked to 273, and I'd like to keep it off to keep the temperature down. It's definetly not a rom issue, but like someone else stated, it's an activesync issue. Even disabling sync options on activesync doesn't seem to help, only thing I can think of is uninstalling activesync, but who the hell wants to do that? Maybe preventing activesync from starting or running in the background on windows start, until you want to open activesync manually?
This is the random wake-up problem that first apeared in some build of WM5 (I guess). I too can't find much info on it but I guess you could remove the pin prompting. It happens due to activesync/wmdc and usb connection while the pin is enabled. I guess this is a bug in WM6 which is yet to be fixed. Hope microsoft and WM6 team reads this thread.
May be end tasking activesync in both phone and system will help. I haven't tried as I live with it and is not an issue for me.
with PhoneAlarm there is an option to disable the ActiveSync scheduling within a profile (eg profile work no ActiveSync, while ActiveSync will still be usable at home)
Maybe this can help you?
btw, PhoneAlarm has some other very nice features, it's still my nr 1 app for the wizard!
I asked the question in the thread but since its past thirty pages I don't think people read that far into it anymore. Please help.
I think I have a memory leak with IM+ I downloaded both the Touchflo and Professional and they both have the same problem. When I go to send an IM to someone the IM box opens but the typing area doesn't show nething just the previous screen where the text box is supposed to be. I used agile but that doesn't connect for ****.
I also have a problem with connection to the internet. I used the network wizard but same thing. I changed the settings from wap.voicestream to internet2 since I pay $30 a month for the internet. Still same problem takes long to grab a connection. Also if it does connect and I minimize a program like IM+ or whatever the internet disconnects then.
This is such a great rom so quick I don't wanna get another one just cuz of these to problems but its getting annoying. Please help because this will cure my flashing addiction if I figure it out.
Elmi said:
I asked the question in the thread but since its past thirty pages I don't think people read that far into it anymore. Please help.
I think I have a memory leak with IM+ I downloaded both the Touchflo and Professional and they both have the same problem. When I go to send an IM to someone the IM box opens but the typing area doesn't show nething just the previous screen where the text box is supposed to be. I used agile but that doesn't connect for ****.
I also have a problem with connection to the internet. I used the network wizard but same thing. I changed the settings from wap.voicestream to internet2 since I pay $30 a month for the internet. Still same problem takes long to grab a connection. Also if it does connect and I minimize a program like IM+ or whatever the internet disconnects then.
This is such a great rom so quick I don't wanna get another one just cuz of these to problems but its getting annoying. Please help because this will cure my flashing addiction if I figure it out.
Click to expand...
Click to collapse
There is no memory leak in the ROM but.... the Touchflo have a leak... the rest is a IM+ problem not a ROM problem
When i don't startup Touchflo there is np but after using it i miss some mem
Try advancedconfig v1.0 for your connection. problem... and deleted all conn. setting and enter them again.
SatScan said:
There is no memory leak in the ROM but.... the Touchflo have a leak... the rest is a IM+ problem not a ROM problem
When i don't startup Touchflo there is np but after using it i miss some mem
Try advancedconfig v1.0 for your connection. problem... and deleted all conn. setting and enter them again.
Click to expand...
Click to collapse
I'll try the connection stuff at home but I got another question if it's not the rom then what is it. Because the IM+ worked perfectly fine with all the other roms except these two. Worked perfect on the regualr TNT.
Elmi said:
I'll try the connection stuff at home but I got another question if it's not the rom then what is it. Because the IM+ worked perfectly fine with all the other roms except these two. Worked perfect on the regualr TNT.
Click to expand...
Click to collapse
+1
i have no idea why, but i experienced the exact same issue. the other roms that ive been using (at least 6 different ones this week) dont have this problem. im back to my stable one, modified Jaguar 3.1.....
Anyone else have the issue of not being able to get pop email from cooked Rom's? I can get exchange mail, I can get phone calls, and hear the system sounds fine. I just cant get pop mail to work. I have tried about 4 or 5 Rom's, and all the radios listed in the sticky post. Please let me know how you fixed it, or if you know how to fix it.
thanks.
Maybe it is more of a setting for the POP account than the ROM's / Radios you have tried.
Maybe the POP accounts settings or port or something else - you are using improper settings? Hard to say...
Maybe someone will chime in with news about 4-5 ROMS all having problems with POP email.
need to go through the account settings in outlook to make sure you are using the right connection. 99.9% sure it is not the rom, just the connection settings
Its the same setting I am using for the one rom that will work. And its gmail, and verizon, so it auto downloads the settings from the web.
Did you make sure you have gmail setup to use pop3 connections?
yes I did. On the rom it works with, I can set it up and work with radio .09, but if I just change to any other radio like .11 or .17 or any other is will stop working. Then change back to .09 it will work again.
can anyone help?
email just broke today
My email was working last night as late as 11 pm. As of this morning I can't even get email to launch! I have tried launching via the today screen, windows live and thru the programs pull down. Now get this, I did a hard reset and reflashed and did a restore of the last good working backup..same thing! I'm running dutty's v7b hybrid rom. Also, voice command just started giving an error immediately on a soft reset. i don't know if this is related or not, but I just started searching for email issues and saw this thread. I have both hotmail and yahoo mail account configured. This after about of week of working fine with a replacement tilt for te 3G bug. Is it possible for AT&T to send something via an update that causes problems for cooked roms? I mean why won't a reflash fix this?
rich
a little help
One thing that I had to do with my comcast email was to forward it to a hotmail account. Nothing I tried would get my comcast email to work on the tilt. This works(or worked ) great for me. My issues are some sort of conflict with apps or a memory leak of some sort, but in general I suspect some email providers don't support pop for whatever reason, so maybe give the forward to hotmail a try.
rich
TimSykes said:
can anyone help?
Click to expand...
Click to collapse
Perhaps it may help to be a bit more specific with the problem that you are having? Are you getting any errors or is it that the mail has simply not just appeared? If the latter is the case, not to insult your intelligence, but be sure to go through gmails settings and first of all enable pop...secondly, if you'd used pop somewhere else prior to that phone, you have to tell gmail again to re-enable pop mail even if it has been downloaded (I'm paraphrasing the wordage). You'll have to do this each and every time you switch the device/software you use to get your pop mail. (Imap wouldn't but imap currently is screwed from gmail's end)
without re-flashing my ROM, I can’t get the error, but it said something to the effect that it cannot connect to the server check the dialing rules. Every time I tell it to do a send a receive it would disconnect the 3g, reconnect it about 2 times, then give a issue with the 3g connection. And it’s odd because 3g works with everything but pop mail. It works for internet, and exchange email. It just when I do pop email. I have only been able to get pop to work with official att ROMs, and with radio .09
TimSykes said:
without re-flashing my ROM, I can’t get the error, but it said something to the effect that it cannot connect to the server check the dialing rules. Every time I tell it to do a send a receive it would disconnect the 3g, reconnect it about 2 times, then give a issue with the 3g connection. And it’s odd because 3g works with everything but pop mail. It works for internet, and exchange email. It just when I do pop email. I have only been able to get pop to work with official att ROMs, and with radio .09
Click to expand...
Click to collapse
Ok, now I know exactly what you are talking about. I've had the same problems before, it seems as if autoconnect for some reason when I flashed didn't work fully. What I had to do was install the carrier settings cab that I kept over from my previous device. On some roms this happend for me, on others it didn't, it probably has something to do with the rom being HTC based or AT&T based. Try installing the Cingular/AT&T carrier settings cab found here.
http://forum.xda-developers.com/showthread.php?t=349630
I've attached to this thread as well. Be sure to report back if this works or not.
great, thanks I will have to flash it tonight and test this out. It would make me very happy.
no it did not work. It killed the internet on my phone.
TimSykes said:
no it did not work. It killed the internet on my phone.
Click to expand...
Click to collapse
For what its worth since you're flashing ROMs, try flashing Q-Mobile 1.2 (sounds like you'd want the Tilt version since you're a US AT&T user). I can confirm that pop mail works just fine so if it doesn't work for you there then you can safely assume it is something other than your choice of ROM brand that is causing the issue. Cheers,
I found what it was, I had to change isp.cingular to wap.cingular
Glad to hear...sorry it didn't work immediatly.
I have tried to mess around with 6.1 lately and for some reason I am not able to figure this out.....
I get everything working, for what I think but then I keep having problems with the MMS. I will send my wife a test message and it takes over 3 hours to get to her. When I am running WM6 with radio 1.27.14.09 it works fine, takes less then 2 minutes to get to her phone.
Now before you start grilling me, I have done a google search. I have found problems such as
1. unable to send at all - not my problem
2. MMS not working - not my problem again (works just really slow)
3. Use this cab, use that cab, I have tried them all they don't change the issue
4. Make sure your going through MEdiaNet - I am
So what I am asking, is anyone else experiencing this problem???? The only thing I have looked into is it possibly an arcsoft issue???
I don't know if this will help, but I'm finding that with the 6.1 roms on AT&T that if you allow the Network Configurator to run, various things don't seem to work quite right. I was having issues with WeatherPanel not working on the AT&T network. I've now flashed 3 different 6.1 roms in the last couple of days and did not allow the network config to setup the AT&T settings, and then disabled it (when the next screen came up). After doing this, I then ran the remove hidden proxy cab and the WAP/MMS setup cab and then did a soft reset. Now MMS works fine (I never had the 3 hour delay you described, but I did have other issues with MMS on some of the roms) and WeatherPanel also now works (haven't had a problem with it in over 24 hours where before it might or might not work, then would stop working a few hours later).
Like I said, may not help your situation, but something to consider and try.
NOTE: The method I just laid out will NOT set up isp.cingular. Only Cingular GPRS and MEdiaNet. This is how I used to always run my Wizard and dumped the $40 per month PDA Connect plan for the $20 per month Unlimited MEdiaNet.
I could hug you!!!! Oh my god, do you feel my love...do you feel me humping your leg!!!!!! It worked,,,,absolutely amazing....Thank you!!!!
Glad it worked for you, but wow, not sure about the extent of the emotion you are sending in my direction... LOL
So for future people that hit this, did you remove the other settings, just install these two cabs, hard reset and follow my above directions, or what? Just curious myself as I'd like to get to the bottom of what goes wrong (or is missed) with the Network Configuator process for AT&T.
To tell you the truth, it stopped working later that night!! I had Dutty's ROM installed , hard reseted , installed the two cabs and it worked. Then I tried sending another pic to make sure it worked about 10 minutes later.... I took 5 hours to get to my wifes phone....
It has to do something with the radio's. I tried a bunch and none work. I'll just wait till the Official 6.1 comes out for ATT and look at the settings.....
Thanks anyways!!!
if your phone said message sent then it arrived 3 hours later to the recipient then its a network problem not really to do with your phone but just incase look at other radios.
ryncppr said:
To tell you the truth, it stopped working later that night!! I had Dutty's ROM installed , hard reseted , installed the two cabs and it worked. Then I tried sending another pic to make sure it worked about 10 minutes later.... I took 5 hours to get to my wifes phone....
It has to do something with the radio's. I tried a bunch and none work. I'll just wait till the Official 6.1 comes out for ATT and look at the settings.....
Thanks anyways!!!
Click to expand...
Click to collapse
http://www.4shared.com/file/42213585/9e4a069f/ATT_Settings_DNS__TCPIP.html?dirPwdVerified=745d7988
Try this .cab
AllTheWay said:
http://www.4shared.com/file/42213585/9e4a069f/ATT_Settings_DNS__TCPIP.html?dirPwdVerified=745d7988
Try this .cab
Click to expand...
Click to collapse
Looks like this just changes some TCP parameters and such. Is that correct? So you would use this in addition to the WAP MMS cab I posted earlier I assume.
mfrazzz said:
Looks like this just changes some TCP parameters and such. Is that correct? So you would use this in addition to the WAP MMS cab I posted earlier I assume.
Click to expand...
Click to collapse
It changes some TCP parameters and puts in the IP header compression and the DNS servers.
I really do not know what the problem is.... those didn't work either. It honestly might be something in my area, South Florida. I tried with the new radio, those files and vice versa. I am dumfounded.
As soon as I flashed back to 6.0 and used the 1.27 radio it sends immediately. It must have something to do with the radio and my area.
I appreciate all the assistance
I have the same problem. I received my tytn II 2 days ago. Previously I used the se K800i. With the k800i, there was never a problem when sending sms messages. Always very fast to send and receive but now on my kaiser, it takes a long time before my messages are received or till I receive an sms message.
Still on the stock rom version 1.56.404.6
radio: 1.27.12.32
Windows mobile 6 professional.
Hi, the youtube app on my fuze is horrible. I can hardly connect when people in my same location can with their iphones on the same network(att). I usually have about 1-2 bars of HSDPA and even when it switches to EDGE which is what their phones catch in my area I still can't watch. It keeps saying connecting. Anybody have any idea what this may be? I don't have stock ROM, I flashed to RRE Fuze Edition, and my radio is version .28 if this info helps. I'm also new to all of this so sorry if this thread isn't in the right place and if I didn't provide enough info. This is Really frustrating though.
ladiesgod said:
Hi, the youtube app on my fuze is horrible. I can hardly connect when people in my same location can with their iphones on the same network(att). I usually have about 1-2 bars of HSDPA and even when it switches to EDGE which is what their phones catch in my area I still can't watch. It keeps saying connecting. Anybody have any idea what this may be? I don't have stock ROM, I flashed to RRE Fuze Edition, and my radio is version .28 if this info helps. I'm also new to all of this so sorry if this thread isn't in the right place and if I didn't provide enough info. This is Really frustrating though.
Click to expand...
Click to collapse
Search is a good option is this forum . Search, !!!!!
open your IE on your phone and open a website, then without closing the IE, open the youtube app and it will connect .
in my experience, it will work after, even after soft reset.
there is a Cab fix for it as well .
Thunder
I tried the search option and I couldn't find any threads dealing with my question. I'll try searching a little better. Thanks for the advice though I will try it.