Related
Hi!
Questions
How to check the version on your PDA?
Is it installed by default ie. in the EXT ROM? I can't find it
I can't find it in the 'Remove Programs' too
However, when I ran Hitchhiker 0.31 it tells me that my version is SP2 Final and it also says that I need 1.0 SP3 or later to be compatible.
What is the latest version and where can I download?
Can someone point the address to download?
Thanks
.NET compact framework SP3
Hi
I downloaded the .NET compact framework SP3 from the microsoft website. This was for Hitchiker 0.31 like you have found.
I had to findle with the installation file on my PC and XDA2i but eventally somehow it was accepted and installed and upgraded on the XDA. Download SP3 from:
http://www.microsoft.com/downloads/...11-194b-4c00-b445-f92bec03032f&displaylang=en
Use the software at http://www.kasuei.com/netcfversion/ to check your version before and after.
I now have Hitchiker 0.31 and .NET SP3 all working fine.
Give it a go
Regards
DRJRAO
RE
Thanks
Hello,
This Net CF "eat" much RAM memory?
Thanks
Hello,
This Net CF "eat" much RAM memory?
Thanks
arp said:
Hello,
This Net CF "eat" much RAM memory?
Thanks
Click to expand...
Click to collapse
Seems not to. I've just installed it and then done a soft reset and everything looks fine.
Dear All,
I would like to ask what is the latest WM2005 ROM version? and is it the best ROM? if not then what is the best version? I have found some on buzzdev.net but I don't know because this my first unofficial upgrade.
I have XDA II with loader 1.01.
Thanks a Lot,
they are all based on the same core rom with improvements
newer versions == more improvements
other then that it's all about how big a ramdisk they are installed
hi rudegar,
sorry, but I must disagree.
they are not based on the same core...
and there's much more differencies, than just size of RAMdisk.
take care
buzz
and what the difference between rom kitchen n rom?? i've read the post by buzz in buzzdev.net, there is 40mb in rom kitchen n 20mb in rom.. what type should i use??
thanx
Updates are good
buzz_lightyear said:
hi rudegar,
sorry, but I must disagree.
they are not based on the same core...
and there's much more differencies, than just size of RAMdisk.
take care
buzz
Click to expand...
Click to collapse
I agree with Buzz.
I think that windows mobile 5.0 is based on windows CE 5.0 architecture and there can be updates to both and the size of a ram disk is not that important as long as a device is capable of running your desired apps without running out of program memory. A newer roms is likely to run better and be more compatible with apps but can still contain bugs. I think that I got more performance from reg editing and ocing that upgrading from 2003se to 5.0 but i always try a new rom.
Buzz do you use ms voice command and any idea on the problem it has with AKU 3.2?
p.s. a rom kitchen is where roms are cooked!
"I think that windows mobile 5.0 is based on windows CE 5.0 architecture"
well we all agree on that one
the place that buzz set to streigth was when i said that
all windows mobiles were based on the same leaked 2005 rom
What I have seen is ROMs based on AKU 2, AKU 2.3, and AKU 3.2. of course each with it's own personal customization and may be some tweaks for performace. From the experiance what is the main differances between AKU versions and what is the best customization from the features and the performace point of view?
I have tried all the wm05 roms here but i got nothing but the sad thought that i don't have a compatible wm5 device. All of them have many flaws and none of them work correctly or as fast as they should be.. not even 03se. After many upgrades and downgrades i found out that the best one is the qtek rom and nothing else. It wasn't suposed to work on wm5 so don't upload versions with bugs and so... try to get a version that will not move slow, will have all the original programs, all the original programs will work and let the user install whatever he wants, don't make roms with preinstalled programes because that only makes them work slow .
Try AKU 3.2 ROM as they r latest and the stable one .
agree with you. stable and fast.
Hi guys!
I own an Xda II and I'm thinking of upgrading it to WM 2005.
After having a look around I'm a bit confused as I'm sure are a lot of other people because there's so many different versions of WM5 to choose from on this forum that I don't know which one to go for.
Could someone please recommend the best and most stable version of WM5?
Thanks a million.
Hi Rizwan
Could not agree more, I'm also confused as to what ROM is the best....
Eg, whats the fastest and most stable ROM out of the bunch?
Cheers
Fudge
well, its same with me a long time ago..
don't worry guys.. after several looking in this page, there's a several rom for WM2005 which is :
1. Helmi AKU3.5
2. C_Shekhar Rom AKU 3.50C (the newest rom)
3. other (like virgy, etc)
In my Opinion, you should try c_shekhar rom. its very nice looking (crossbow theme), more stable, quite fast..
hope you find the suitable rom.
darifin said:
well, its same with me a long time ago..
don't worry guys.. after several looking in this page, there's a several rom for WM2005 which is :
1. Helmi AKU3.5
2. C_Shekhar Rom AKU 3.50C (the newest rom)
3. other (like virgy, etc)
In my Opinion, you should try c_shekhar rom. its very nice looking (crossbow theme), more stable, quite fast..
hope you find the suitable rom.
Click to expand...
Click to collapse
I traied all
This the best Rev b &/Or c at least it is supported by some one will answer ur questions
http://forum.xda-developers.com/showthread.php?t=287941
One of the best
One of the best ROM for me is the latest Tofclock ROM.
sprint said:
One of the best ROM for me is the latest Tofclock ROM.
Click to expand...
Click to collapse
I second that!
Thanks a bunch guys!
The best and most stable version of WM5 by llbasha
Rizwan said:
Hi guys!
I own an Xda II and I'm thinking of upgrading it to WM 2005.
After having a look around I'm a bit confused as I'm sure are a lot of other people because there's so many different versions of WM5 to choose from on this forum that I don't know which one to go for.
Could someone please recommend the best and most stable version of WM5?
Thanks a million.
Click to expand...
Click to collapse
I was reluctant to respond to this but some how I find myself compiled to post my comment. I have XDA2 and I am using llbasha rom. All the roms have the same core structure except of adding/removing some freebies and here is my latest version that has been tested and verified by independent users (special thanks to twistedconnections and maslowyk). You can download it from here: http://www.4shared.com/file/12061070/727297c0/llbasha-WM5-AKU35pp16c3R.html
File Name: llbasha-WM5-AKU35pp16c3R.rar
Info about this release:
=================
Clean Rom 16 Pagepool 48 Ramdisk 64 Program
--------------------------------------------
ROM: 3.50pp16C3
dated: 28.02.2007
PagePool 16mb
RamDisk 48mb
Program 64mb
OS 5.1.195 (Build 15698.3.5.0)
For Himalaya PH10B (XDAii MDA2 Qtec2020 Imate Pocket PC)
=============================================
version difference: 3.50pp16C3 vs 3.50pp16A2
Removed SMS yellow background color (fonts, etc. everything to WM5 default).
Returned to Windows Mobile 5 blue dialpad & all other defaults.
Fixed the 3rd tab on button (now display lock/unlock)
The following items have been removed:
All extra theme (*.tsk)
Fonts Panel
GB-Soft Tweak Panel
Backup SMS
EditAutoCompleteDic
Tray Launch
psShutXP
StopWatch
Total Commander
TaskManager,RegEdit, etc.
Today cLaunch plugin
Today Battery plugin
Today MSN plugin
Today O2 Sound Profile
Today O2 Operator
The following has been added:
Download Agent
Windows 2005 Backup
HTC CommManager v.910
ThePad (hand note pad)
Terminal Service Client
VJ hide-softkey (hide the softkey bar)
GSFinder+ (instead of Total Commander)
Simple Soft-Reset (instead of psShutXP)
RAR (compression & decompression)
Task-Switcher (can be assigned to hardkey)
===========
Important Note:
WlanMgr does not work but does not effect the WiFi functions and I am using this rom with Spectec SDW-821 (WLAN 802.11b/g) without problem. I have also been informed that Ambicom SDIO card works fine as well.
As always, flash at your own risk...any un-official rom is released for testing.
Always clean/embty your old ramdisk before burning new rom.
==============================================
Hi Guys
Does any one know where to get the latest version of the Tofclock ROM?
What is the latest version? (I belive I have 2.01a.64WWE? of his ROM but is there a newer version? seems hard find)
Many thanks!
Fuge
Go for llbasha's rom. I have been using it since the first version that was release by him. Fast and stable.
Latest Toflock ROM
Does any one know where to get the latest version of the Tofclock ROM?
What is make this ROM best. Details please.
@ llbasha : Cheers!
fudgebottom said:
Hi Guys
Does any one know where to get the latest version of the Tofclock ROM?
What is the latest version? (I belive I have 2.01a.64WWE? of his ROM but is there a newer version? seems hard find)
Many thanks!
Fuge
Click to expand...
Click to collapse
http://qtekworld.free.fr/rom/XDA_WM5_3.50aWWE.rar
tofclock new ROM is great.. but i found out there is no MMS funtion..
how can enabled the MMS function in Tofclock ROM?? and i already installed old ArcsoftMMS.cab (v.2.0).. and i can setting the MMS but still no MMS function..ermm..
sorry for poor english..
p/s: where can i find ArcMMS.cab for new version.. **NooBie**
locomotion said:
tofclock new ROM is great.. but i found out there is no MMS funtion..
how can enabled the MMS function in Tofclock ROM?? and i already installed old ArcsoftMMS.cab (v.2.0).. and i can setting the MMS but still no MMS function..ermm..
sorry for poor english..
p/s: where can i find ArcMMS.cab for new version.. **NooBie**
Click to expand...
Click to collapse
http://qtekworld.free.fr/rom/mms3.5.1.5.cab
but it is better to use C_shekhar rev b or c
Regards
thanks.. but how to enable MMS function on Tofclock ROM?
i just found Text Messages and Outlook only.. no MMS..
appreciate u guys helps..
and also how to remove yellow sms background display..
Tofclock Rom is neat and have a nice icons folder..
Great work guys keep them comming in!
darifin said:
well, its same with me a long time ago..
don't worry guys.. after several looking in this page, there's a several rom for WM2005 which is :
1. Helmi AKU3.5
2. C_Shekhar Rom AKU 3.50C (the newest rom)
3. other (like virgy, etc)
In my Opinion, you should try c_shekhar rom. its very nice looking (crossbow theme), more stable, quite fast..
hope you find the suitable rom.
Click to expand...
Click to collapse
hersham..
where i could dwnload Helmi AKU3.5 new ROM??
atomxdaii said:
Go for llbasha's rom. I have been using it since the first version that was release by him. Fast and stable.
Click to expand...
Click to collapse
can it use on my XdaIIi? Newbie here
kulaan said:
can it use on my XdaIIi? Newbie here
Click to expand...
Click to collapse
Welcome , I'd strongly recommend not to try that! The XdaIIi is a completely different device altogether! Go the the Alpine Forum and see if you can find anything there. Here's the link : http://forum.xda-developers.com/showthread.php?t=242428
Specail Thanks:
http://bbs.dpdclub.com
I just use my friend's SYS that has been edit the build number to 20993.1.5.3.
Hope no one will hate it..Just a NUMBER GAME.And a fake 20993.(Real 20764)
Click to expand...
Click to collapse
Yesterday I post a Chinese_WWE Form that use MSYH.ttf &PlumSIP
Now I've got an EzIput Version.
Download link:
rayfile/fs2you
Some Screeshot(Just One Picture:Quick GPS):
When you use this ROM you'll find some amazing things:
1.Manila2D:1821.1624!
2.USB Pop Up!
3.New Camera Driver!
4.Your turn to discover more...
screens please
Will Post soon
NETCF
Hi!!
I wanna know about NetCF which was built in this rom?
I need to use NetCF 2.0 but all roms use NetCF 3.5.
So I can't install NetCF2.0 because NetCF35 was built in rom.
How can i do?
Thank you so much.
Why you need older version?
NETCF
Dear btxakita,
Because of Uptodate, I need to use this program.
It's compatible with NetCF2.0.
I tried to use all 6.1 rom (with NetCF 3.5) that make Uptodate always show errors.
So I flash rom back to original 6.0 rom.
Actully I really love 6.1 rom but I need to use Uptodate.
Do you give me an advice for installing NetCF2.0 when NetCF3.5 was built in rom.
Thank you so much.
url please
Rapidshare - error...
PowerOff not work
Thank you for share Rom. I had try your Rom
But the PowerOff not work. After push Shutdown, It will reset device every time. And It' show menu Chinese language. Please advise in English version too.
Thanks in advance.
Cheers
Poldo V10 Waiting for Next ROM
thiti1999 said:
Thank you for share Rom. I had try your Rom
But the PowerOff not work. After push Shutdown, It will reset device every time. And It' show menu Chinese language. Please advise in English version too.
Thanks in advance.
Cheers
Click to expand...
Click to collapse
Hope It Work Soon!!!
Full Screen Capture Pls
Dear Dutty,
Can u plz help us:
forum.xda-developers.com/showthread.php?t=499741
we r trying to run a program called "uptodate" - www.uptodate.com - it worked fine with me on windows 6.0, but in your ROM it can't read topics. The program appears to depend on IE and topics r contained in JAR files.
UR ROM is the best, but this program is the reason I bought a PDA from the first place!
I hope someone can find the solution
thanks
Hi guys,
If you want to make your own Rom for your i617, just follow these steps:
1. Get these runtimes and install on your PC (Windows XP): vcredist_x86.exe and NetCF 2.0
2. Get the the kitchen: [SamSung i617] kitchen, then extract to any where you want.
3. Get the original AT&T WM6.1 for i617 (only OS part), then put into BaseBin folder in the kitchen: The original Rom AT&T WM6.1 for i617 only OS file (pda.bin)
4. Now let you start to make the kitchen work:
- Run Dump [pda.bin].cmd then wait to complete.
- Get the file: initflashfiles.dat, then put into OEM\OEM_Lang_0409
Done. Now you can cook anything you like, after cooking, just run Build [pda.bin].cmd to rebuild the new Rom (in RomUpdate folder).
There is a guide to update Rom in the Attatchment.
But note that:
- Maybe some of PCs have some problems (cause virus or any reason), it can't show full hidden files. Just install fresh Windows XP again to fix it.
- To port the newer version of build, let you have to learn Here
And the last, I did sell my SamSung i617 to change a new toy
Sorry for my bad English.
Good luck.
Thanks for the kitchen, downloading now
Update clean Rom. See attachment at post #1.
i600
I wonder if this will genuinly work on i600!
It looks nice.......i wish i could have WM6.1 on my device :-D
^^rac said:
I wonder if this will genuinly work on i600!
It looks nice.......i wish i could have WM6.1 on my device :-D
Click to expand...
Click to collapse
Just download my kitchen. Get your "pda.bin" (the pda.bin of i600 ship Rom), then place into BaseBin folder, Dump it, build/cook...
error unpacking
@nhathoa
i get an error unpacking your kitchen...
part 4 has an error in file g´reloc.exe or something like that...
is there any problem?
and btw: how can i get my pda.bin? do i need to dump my rom?
thanks for your help!
regards
chuckbert
Please try to download part 4 agian.
what is your device?
device
i reloaded part4 already 2 times... error stays...
but i found a file called greloc.exe inside... is this the one needed?
i have a german i600... it´s german though it has a qwerty instead of a qwertz keyboard.
regards
chuckbert
chuckbert said:
i reloaded part4 already 2 times... error stays...
but i found a file called greloc.exe inside... is this the one needed?
i have a german i600... it´s german though it has a qwerty instead of a qwertz keyboard.
regards
chuckbert
Click to expand...
Click to collapse
Let me try with i600 on my kitchen. But I haven't got i600 device.
More:
I did try with i600.
My kitchen work fine with samsung i600 .
Nhathoa,
Can you upload your i600 WM6.1 image somewhere? I tried to cook it but didn't work (yet). It would really mean a lot if you can upload a working rom.
Thanks!
daxy said:
Nhathoa,
Can you upload your i600 WM6.1 image somewhere? I tried to cook it but didn't work (yet). It would really mean a lot if you can upload a working rom.
Thanks!
Click to expand...
Click to collapse
Sorry, I have no i600 device, so I can't make/test WM6.1 for i600.
nhathoa said:
Sorry, I have no i600 device, so I can't make/test WM6.1 for i600.
Click to expand...
Click to collapse
There was someone willing to use his device to test WM 6.1 ROM. I dunno how cooking etc works, but it would be awesome, if someone can try to bring this to i600
Good work nhathoa!
Hopefulle someone can try to cook a succesfull i600 WM 6.1 ROM!
i dont recommend using greloc in i607.. as for i600 it might be the same.. the problem is when you use greloc, the camera software will malfunction
ejoya said:
i dont recommend using greloc in i607.. as for i600 it might be the same.. the problem is when you use greloc, the camera software will malfunction
Click to expand...
Click to collapse
Exactlly. The g'reloc.exe can't relocate resover module, but if you skip g'reloc and edit some module, device not boot. Thanks for your report.
More: Did you port build 20282 from ROSE? I did port full XIP and SYS, Free Ram on boot is 83Mb, but low speed, not smooth.
resover is not needed..
porting htc sys should be ok.. but its too much trouble if you want a perfect stable rom
Does anyone upgrade my clean Rom? Is there something wrong?
Hi!i dont understand how i can install the rom on a i600..how can i cook a rom for my i600??"BaseBin\pda.bin" where i can find it?
I CANT BRING THE GPS WORK WITH UR CLEAN ROM,ROLL BACK 2 ORIGIN NOW..
THX FOR UR TOOLS, HOPE FOR UR NEW ROM NOW.
I have tried the kitchen, and dump is ok.But it makes some errors when building . I tried to only run buildos, but failed!
It seems that an older version could run correctly, which I used in a X51v kitchen. So does it need some other files? like .net 3.0 or 3.5. I just installed a 2.0 version
laronz said:
I have tried the kitchen, and dump is ok.But it makes some errors when building . I tried to only run buildos, but failed!
It seems that an older version could run correctly, which I used in a X51v kitchen. So does it need some other files? like .net 3.0 or 3.5. I just installed a 2.0 version
Click to expand...
Click to collapse
What error did you get?