Database Info

Anyone concerned regarding the slideout keyboard noise?

Well, overall, I think the build quality of the Touch Pro is wonderfull! I love that its slightly heavy too!
But the keyboard slideoutmechanism, although very solid and robust gives away a worrying noise, sorta like its scraping against something. Anyone managed to confirm if this is nothing to worry about? I feel like I damage the device each time I pull it out.. lol
Regards

According to me that's the LCD flatcable cover sliding into place. With the device opened you'll find a little latch of sorts at the top of the screen back, that slides shut when opened and opens up to give the LCD flatcable some room to roll itself up in.
Nothing to worry about then!

Stylus removal doesn't wake up my Touch Pro!

Hi everybody,
Got myself a brand new Touch Pro last monday and really love the thing. However, after playing with it for the past few days, it somehow stopped reacting to stylus take outs. Both when in sleep mode, as in a call. It won't wake up or pull up the notes application, respectively. I didn't drop the device or anything. Just installed some apps.
Anyone experiencing the same thing? Or does someone know of a certain option or registry entry that I can check?
Thanx! Scott
EDIT:
I tackled the problem! For anyone else experiencing this problem:
There is a tiny switch located at the top of the cut out for the stylus. Check whether this switch is obstructed. Mine got stuck under the casing of the device. Maybe this can happen randomly when inserting the stylus.
If anyone of you have had a similar problem, please report it here. If it is common, we should report it to HTC as well.
Scott

see and i thought the pro didn't wake up like the diamond does. now realize u have to take it fully out to wake.

Out of curiosity how did you clean it out? The only way I can see to do it is to pull the phone apart or just blow backwards down where the stylus rests.
I've had the stylus jam up inside the casing on me a few times. Quite possibly the battery sitting funny inside the case, a guy on whirlpool mentioned it.

ugh this happened to me today... how did you fix yours?... i don't really see where the dam trigger for this thing is

How to fix
I fixed mine using a toothpick and a flashlight. Use the flashlight to shine into the stylus silo. When you look closely you can see a tiny switch about 1cm upwards from the bottom of the device.
The switch roughly looks like this: _/|_ When you insert the stylus it "rolls" in a upward direction. Mine got stuck at the top of the square hole where the switch normally points out.
I carefully used the toothpick to pull it back out. I carefully pushed it in a little bit and made a downward movement. It popped right out to its normal position.
I hope this helped!
Scott

I'm having the same problem... Can someone post a photo so I know what to look for?

Same problem here, fixed by flicking the switch a couple of times.

Quick idea, maybe install the program: Gyrator2.
If it's not a sensor problem, I believe it might help since it's one of the specified rule and the program is quite useful anyway

This problem will happen if you jab your stylus into the slot without being careful. It won't touch it's switch. So it'll slide to the side. I'd suggest you point a flashlight at it and find out.

I found this thread when looking up how to solve my stylus issue, out of the blue it has been jamming up when I tried inserting the stylus in and out. Almost as if the stylus got thicker during the day, a very tight fit. Read this thread and got a clue that it may have something to do with that switch.
If I insert my stylus in at a angle it glides in and out as it is suppose to. If do it without paying attention like i do 90% of the time I will jam. I have have a look at this switch once I get home.
Thanks

Well, this forum has saved me yet again.
I was actually playing around with Gyrator when my stylus suddenly got really, really hard to move in and out. I had just deleted the stylus events in the app once I figured out what was key-locking my device, when on the next stylus insert it got really stiff. For a moment I thought maybe the app make some magical change to the magnet or something and so I uninstalled, tried it, then reinstalled gyrator.
I put an LED flashlight up to the little hole about an inch (5 cm) down the stylus shaft and then used a needle to play around in there. I can't say I have a clear idea where the switch is exactly, but I figured it was toward the body of the device. I finally saw something move and then tried the stylus. It worked a lot better then next two times, then suddenly it's again snapping in and out easily.
Thanks to the OP!

photos of switch
Daniel1515 said:
I'm having the same problem... Can someone post a photo so I know what to look for?
Click to expand...
Click to collapse
My stylus got super sticky all of a sudden (to the point i was scared i would break it if i pulled any harder to get it out). I couldn't figure it out. Then i read this thread and found out about the stylus switch. My switch was not aligned straight in the silo. All i had to do was find the switch and bend it back into place with a toothpick. I had some success bending it back with the stylus itself, but it is far enough back in the silo that it's hard to get good contact with the stylus point. And it quickly got stuck after a few inserts/removals. But after i bent it into place with the toothpick, it has been fine for the last few hours.
I've attached 2 photos of the stylus silo (the picture titled switch2 is better), in which you can just barely make out the switch. The pictures are taken with the Touch Pro face down. The switch in the pictures is in the correct position. It should jut straight out into the silo. If it is coming in at an angle, it may be making your stylus stick. Or it may not be registering (and thereby not waking up your Raphael) when you remove your stylus. You need to shine a light down the silo, or you'll never see it. It was extremely hard to get the photos because the natural light wouldn't illuminate down the silo, and the flash had to be aligned just right so that it would bounce back to the lens of my camera. But it's the best i could do.

Stylus prob
I am having the same problem, and have been unable to resolve it yet, if anyone can document exactly what they did to fix it I would be grateful.
Twiddling about with a needle is kind of hard to visualise.
Thanks
A|C

Thanks for the tips and the pics pokeycd.. i was scared that i had damaged my magnetic sensor but ur pics and info were just great and my stylus locks in and comes out perfectly now. thanks a lot.

I had the problem too. I got that cellphone and thought that it was suposed to be that hard to insert that stylus. Then i read this thread and watched a little closer and i found that switch beeing stuck. I first repositioned it with a toothpick. Then it worked again, but i need to be careful inserting that stylus (inserting it with an angle) else it will get stuck again. But later on i realized that i can easily reposition that switch with that stylus just by inserting it at an angle. (Angle). I hope u can figure out how you can fix that.
A picture of the switch (it's not that sharp but it will let u guess where you have to look for):
Switch for the Stylus
I hope it will help.

I have same problem too. I buy today Touch Pro. I think that magnet sensor is not OK.
Thanks to all for solved this problem
I think this problem is for all Raphaels..

There is no magnet sensor as far as i think. The magnet is just for keeping the stylus in the phone. There is a 'machanical' sensor (as you can see on the photos above). That sensor is either sticking in the case or is beeing stuck by inserting the stylus without caution.

I have this problem too I think...My stylus now slides in and out of the device without a problem, but if I look in Gyrator it always thinks my stylus is in. Despite all of the pics and advice above, I can't seem to locate / unstick / bend the sensor back to its correct position.

My switch came out
I was having this problem with the super-tight stylus on my Fuze, and after taking it in and out a few times (which I wish I hadn't done), I did this-
Take out the battery and shine an LED pocket flashlight into the opening of the silo where the batter sits, shining it back towards the opening.
I saw the tiny black lever that senses when the stylus is in or out. With my Fuze positioned with the silo on top, screen on left, battery area on right, this little lever was on the bottom right.
I took a toothpick and could position it so it stuck straight up into the center. I tried to move it around a few times, but then it came off and fell out! (came off or broke off)
Here are some pictures of the little piece and the stylus opening after it came out.
It doesn't look like the plastic is broken... anyone know if it can be fixed?

I have a design flaw on mine
I think I have a design flaw: instead of the switch and the casing for it, mine shows a cavity with what I thought was a metal sensor. I think the whole swith thing is missing on mine. Always has been.

[Q] Display problem(spot, pressure remains)

So, few days ago my Touch pro(GSM) started with this weird issue. It looks like a circular spot <1cm diameter. It looks like pressure is applied to the display from back of the display. I tried to take photo when I disassembled phone and tried to resolve this, but display is glossy and camera cannot properly focus :-( spot i located in place where there are hatch(door) mechanism on back. When I dissasembled phone there was nothing causing pressure. I found out that if I press corners on diagonal axis spot disappears. I think that back of the display is arched in some way and pressure on chasis of phone press arched back againts lcd crystals. It happened when I was wearing my TP in jeans pocket. So first thought was that some stich in pocket, or something was presing againts display, but I am almost sure that this is caused by pressure on body of phone. Its night here so I will see tommorow If dissasembling, tinkering with screwdriver helped, but I dont believe this much. Question is: Did someone experienced this kind of issue? How do you resolved it? Will buying new display from ebay help?(I think yes, but there is possibility that display is ok and body is deformed in some way)
Thanks for your time.

Does it look as an oil spot?
Try to raise the membrane with vacuum or sticker and you'll see,if it disappears for a moment.
If so,I am affraid,you have to replace display/digitizer.
I got this oilspot on one of my Himalayas.
Also touch isn't working on this place,anywhere else is working,but after raising the membrane.

Well, I am 100% sure that digitizer is ok, because spot was on display. Touch functionality was ok but display was having strange colors and after disappearing light yellow tint in place of spot. As I took apart my Touch pro, I was ok with buying new display so I looked how old si attached to the case and bended it a little. Spot disappeared and display is still ok and I consider it repaired. Maybe it was really only the bended back or it was one of those self repairing defects.

[Q] something rattling inside my transformer!!!!

just been using google skymap and I've noticed there is something rattling inside my transformer!!!!!!
is the back removable? anyone spotted a way something could have got inside? or is it something broken inside?????
its not been dropped or anything ........ and I've only just started noticing the noise .....

you sure it isn't edge creak? if it really is ratteling return it.

not a creak. something moves inside the unit from one end to the other. only started tonight. thing is I have no light bleed no sharp edges ....... don't know if its just something got in through a gap somewhere or something snapped off inside

My opinion would be return it, sure it could be harmless but it's still a faulty product. It could also **** up your device later on or be a sign of more ominous things.

I know you are right .... but I bought it from comet and it took long enough to arrive so god knows how long a replacement will take
and sods law ill get light bleed or gaps or sharp edges next time
ill ring comet tomorrow

wilbur-force said:
just been using google skymap and I've noticed there is something rattling inside my transformer!!!!!!
is the back removable? anyone spotted a way something could have got inside? or is it something broken inside?????
its not been dropped or anything ........ and I've only just started noticing the noise .....
Click to expand...
Click to collapse
If you enable and disable the camera it makes a sound. Try activating camera ....is that the same noise you hear?

wilbur-force said:
just been using google skymap and I've noticed there is something rattling inside my transformer!!!!!!
is the back removable? anyone spotted a way something could have got inside? or is it something broken inside?????
its not been dropped or anything ........ and I've only just started noticing the noise .....
Click to expand...
Click to collapse
If you enable and disable the camera it makes a sound. Try activating camera ....is that the same noise you hear?
I know there are 2 openings right under the LCD itself cover. On the left hand side there is tow half inch hole under the LCD, if you take a piec of paper and insert it at the left hand edge and sort of drag it down...you'll know where the gaps are, but this is too small for anything to go through...maybe these are air vents.

its not the camera. I'm sat here web browsing and if I rotate landscape and portrait it hear something moving.
not sure I follow what you mean about the holes. wondering if something has got in through the keyboard dock points???

It's probably baby teeth. I hear they're good luck.

stuntdouble said:
It's probably baby teeth. I hear they're good luck.
Click to expand...
Click to collapse
Or the hamster fell out of the wheel
Sounds like another asus QC story, i wonder what crazy stories will come next?
Good luck with getting it resolved.

Photo cameras have mechanical orientation sensors that are making a noise when going from landscape to portrait but they are very quiet and I doubt they are used in phones and tablets which have accelerometers.

this was something definitely moving about..... ie traveling the length and width of the unit.
its stopped now though so I haven't got a hope in hell of persuading comet that "my unit was rattling, honest! "

don't worry about persuading comet...just give them a call and they'll replace it...
I asked for a replacement yesterday..and I believe the support guy had no idea what a light bleed is, and he tole me parcelforce will come my home with a new TF on Monday..

damn.... after a week of no rattling its started again. I'm convinced its just a fragment of plastic or something and apart from that the unit is perfect .... no light bleed or dead pixels or dust ....
do I risk exchanging?
I wonder how easy it is to get the back off?

wilbur-force said:
damn.... after a week of no rattling its started again. I'm convinced its just a fragment of plastic or something and apart from that the unit is perfect .... no light bleed or dead pixels or dust ....
do I risk exchanging?
I wonder how easy it is to get the back off?
Click to expand...
Click to collapse
You might try a magnet and see if you can move the fragment within the case. Of course, it could use aluminum screws but metal will have more mass than plastic. If it tends to roll easily, I would suspect a metal fragment.

levenite said:
You might try a magnet and see if you can move the fragment within the case. Of course, it could use aluminum screws but metal will have more mass than plastic. If it tends to roll easily, I would suspect a metal fragment.
Click to expand...
Click to collapse
That's a good way to screw up other components inside your device. I wouldnt do that if I were you.

lol, no, i think i will avoid the magnets thanks
.... sent from my shiny new keyboard that arrived this afternoon by the way

Backlight doesn't come on unless i bend the phone

So on my Nexus 5, the backlight started going off randomly... tapping phone would bring it back..
Then eventually it went out and i had to bend/flex the phone and it would keep working a while..
I contacted support then, but one time i bent it a little to get it on and the frame (plastic outer edge cracked), doh.. Now, of course, they will not give me a warranty repair because the device is physically damaged. So i tried a new screen, no dice. Now i have two good screens and a phone that still wont work unless i bend the crap out of it. Anyone else see this problem? Worth trying to replace motherboard? or should i just sell parts (new screen i bought, old screen, battery, etc) and buy a whole new phone... There is one specific point where i can bend it and backlight comes on, but i cant find a short or loose connection anywhere. I have had the thing COMPLETELY apart and back together multiple times. I should mention, it works totally fine when backlight is off, just no backlight so i can only see it in super bright direct illumination.
Any ideas???

Take it to a mobile phone repair shop.
Sent from my Nexus 5 using Tapatalk

Fixed for now! Woohoo! Based on the position of where i had to flex it, i tried a little gap filler... a folded piece of paper, between the SIM slot and the back frame. With everything screwed back together, it just puts a little pressure on that area of the main board.
Now the only problem is the screen i bought is defective (lines all up and down it) so now i have to disassemble again to put the old one back in.... oh joy, now to return it through ebay... I'm sure that will work well. Either way, phone working again! FYI, this phone is REALLLY easy to take apart and put back together.
EDIT: F.. snapped the end off one of the little antenna cables (the black one, on the right when looking at the uncovered back of the phone) when redoing the screen. Anyone know what that is for? WiFi and cell data signals seem ok.. Looks like a diversity antenna for something, because of all the others at the tope. Maybe google will have an answer.

ramerco said:
EDIT: F.. snapped the end off one of the little antenna cables (the black one, on the right when looking at the uncovered back of the phone) when redoing the screen. Anyone know what that is for? WiFi and cell data signals seem ok.. Looks like a diversity antenna for something, because of all the others at the tope. Maybe google will have an answer.
Click to expand...
Click to collapse
Check Bluetooth/try calling/using data just to be sure.

Do not discuss something on how to make fool of insurance company or even an warranty, It's not allowed here. Thanks