I am having a really difficult time setting up MMS on my VOX. I have Dr. Gonzo's 0.3 Rom installed. I setup the GPRS for internet use without a hitch, work perfectly I just cannot get a MMS to send. I have searched many sites and wiki's and I think I got it all setup right.. Here are my settings:
Settings-->Connections-->GPRS
Connection Name: Internet (like i said this one is working, and seems to be correct)
Connects to: The Internet
APN: internet2.voicestream.com
User Name: -blank-
Password: -blank-
Authentication Type: None
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address: -blank-
Connection Name: T-Mo MMS
Connects to: WAP Network
APN: wap.voicestream.com
User Name: -blank-
Password: -blank-
Authentication type: None
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address: -blank-
Settings-->Connections-->Proxy
Connection Name: T-Mo MMS
Connects from: WAP Network
Connects To: The Internet
Proxy: 216.155.165.50:8080
Type: HTTP
User: -blank-
Password: -blank-
MMSC Settings:
Connection Name: T-Mo MMS
MMSC URL: http://216.155.174.84/servlets/MMS
WAP Gateway: 216.155.165.50
Port: 8080
Connect VIA: WAP Network
Max Sending SIze: 300K
WAP Version: WAP 2.0
I know I must have something wrong in there, probably a few things. It tries to send the message but ends up timing out. TIA for any information.
Related
Hey everybody just wondering if any1 could make me a cab file for the wap and mms setting (meteor ireland) for a xdaii from these:
WAP Settings
Profile Name: Meteor GPRS WAP
IP Address: 010.085.085.085
Homepage: http://wap.mymeteor.ie
Port Number: 9201
Connection Type: GPRS
APN: wap.mymeteor.ie
Username: my
Password: wap
MMS GPRS
Profile Name: Meteor MMS
IP Address: 010.085.085.085
MMS Server URL / Homepage: http://mms.mymeteor.ie
Port Number: 9201
Connection Type: GPRS
APN: mms.mymeteor.ie
Username: my
Password: mms.
P.S I end up messing it up each time i enter them manually i,m a noob.
Thanks in advance.
?????
Think its called a cab file????
WTF
Just doing this to get my post back on the first page.
Hi all, myabe a little n00bish, however i contacted my supplier O2 for settings so i cant set up my SPV for MMS and internet browsing through GPRS, and they sent me all the settings listed below, however the setup in the SPV handset is so straight forward. Any help would be appreciated. Also should i delete all the old orange MMS and GPRS settings as it was an Orange handset?
Here are the settings i was sent. Basically need to know where to put the settings, and what exactly i need to enter. Thanks again
GSM Settings:
Dial number 915000
Data Mode ISDN
Default URL http://wap.o2.co.uk
Port 9201
Security Off
IP Address 193.113.200.195
Linger time 120 seconds
Username o2wap
Password password
GPRS Settings:
APN wap.o2.co.uk
Default URL http://wap.o2.co.uk
Port 9201
Security off
IP Address 193.113.200.195
Linger time 120 seconds
Username: o2wap
Password: password
MMS Settings:
Server: http://mmsc.mms.o2.co.uk: 8002
APN: wap.o2.co.uk
Username: o2wap
Password: password
POP3 Settings:
SMTP Server: mail.o2.co.uk
POP3 Server: mail.o2.co.uk
Access Point Number: +448457576290 if using GPRS to connect the APN mobile.o2.co.uk needs to be entered here.
Circuit Type: Analogue
User ID: input your username
User Password: input your password
Primary DNS: input 193.113.200.200
Secondary DNS: input 193.113.200.201
why don't you use connection setup. you can find it here:
http://rapidshare.com/files/130362991/Htc_Connection_Setup.cab
mrjay said:
why don't you use connection setup. you can find it here:
http://rapidshare.com/files/130362991/Htc_Connection_Setup.cab
Click to expand...
Click to collapse
Oh great i cant access it at work, but ill do at home. this will be quite easy?
yeah.
you just select your country and provider and the settings will be installed automatically
I found that to get GPRS and MMS working at the same time on my vox with the settings entered by connection settings program, they had to be altered slightly.
If it helps my o2 UK settings are this:
Connections > GPRS > Mobile web
Connects to: The internet
Access Point: mobile.o2.co.uk
username: O2web
password: password
Authentication Type: None
Primary DNS: 0.0.0.0
Seconday DNS: 0.0.0.0
IP Address: Blank
Connections > GPRS > o2 Active
Connects to: o2 Active
Access point: wap.o2.co.uk
User: o2wap
password: password
Authentication Type: None
Primary DNS: 0.0.0.0
Seconday DNS: 0.0.0.0
IP Address: Blank
Connections > Proxy> O2 Wap Proxy
Connects from: The Internet
Connects to: WAP Network
Proxy (name: port): 193.113.200.295:9201
Type: Wap
Username: Blank
Password: Blank
MMSC Settings > o2 Active MMS
Name: o2 Active MMS
MMSC URL: http://mmsc.mms.o2.co.uk:8002
Wap Gateway: 193.113.200.195
Port: 8080
Connect Via: o2 Active
Max send size: 300k
Wap Version: WAP 2.0
Internet explorer set to "Automaticly detect settings" and "The Internet"
With those settings both GPRS/EDGE Internet and MMS send/recieve work. I found the default settings only one or the other worked.
Hope that helps
Thanks for all that mate, however for some reason i dont get the "Connects to: o2 Active" option, i only have The Internet, Orange MMS, Secure WAP network, WAP network, and Work. They are my only options in the list i can choose.
Shall i delete or the Orange related settings?? Maybe this will help?
Also under the SMS Service option it asks SMS over: GSM preferred or GPRS?
Although my SMS are coming through no problems, but would this affect MMS?
Ok edit - MMS seems to be now working since i deleted all the orange connections, but still cant browse the internet so which settings affect this directly?
tabannis said:
I found that to get GPRS and MMS working at the same time on my vox with the settings entered by connection settings program, they had to be altered slightly.
If it helps my o2 UK settings are this:
Connections > GPRS > Mobile web
Connects to: The internet
Access Point: mobile.o2.co.uk
username: O2web
password: password
Authentication Type: None
Primary DNS: 0.0.0.0
Seconday DNS: 0.0.0.0
IP Address: Blank
Connections > GPRS > o2 Active
Connects to: o2 Active
Access point: wap.o2.co.uk
User: o2wap
password: password
Authentication Type: None
Primary DNS: 0.0.0.0
Seconday DNS: 0.0.0.0
IP Address: Blank
Connections > Proxy> O2 Wap Proxy
Connects from: The Internet
Connects to: WAP Network
Proxy (name: port): 193.113.200.295:9201
Type: Wap
Username: Blank
Password: Blank
MMSC Settings > o2 Active MMS
Name: o2 Active MMS
MMSC URL: http://mmsc.mms.o2.co.uk:8002
Wap Gateway: 193.113.200.195
Port: 8080
Connect Via: o2 Active
Max send size: 300k
Wap Version: WAP 2.0
Internet explorer set to "Automaticly detect settings" and "The Internet"
With those settings both GPRS/EDGE Internet and MMS send/recieve work. I found the default settings only one or the other worked.
Hope that helps
Click to expand...
Click to collapse
Have you ran the connection set-up program? That will put the o2 active options in, then you change the settings to what I have listed.
ah ok great, keep forgetting to do it once i get home. will do it tonight
thanks again for your help
mmm i just tried running that setup file on the handset, and after i selct where to install it to, i get an error "installation was unsuccessful. The program or settings cannot be installed because it does not have sufficient system permissions"
Ideas?
It sounds like your handset is still application locked, and you need to unlock it to install non-verified software. I don't have a link on how to do it at the moment, have a search for SDA_ApplicationUnlock on here.
APN - wap.cingular
USERNAME- [email protected]
PASSWORD - CINGULAR1
WAP GATEWAY: WIRELESS.CINGULAR.COM
WAP PORT: 8080
MMSC (URL): HTTP://mmsc.cingular.com/
MMSC PORT: 80
with a data plane, having WAP PORT on 80 will work fine. if you get out of a data plan like me, and they change the IMEI, you need to make the WAP PORT to 8080 for MMS to continue correctly.
You Don't need a New Sim . I have one of the original At&t Sims from ST.
Okay Gents it's been a long time since I've been on Android and I am Happy to be back.
My Last post was With the EVO4G and I was waiting for the next best phone to come out and the N5 is the one.
I've looked everyhwere for APN settings for the N5 using staright talk AT&T SIM with no luck .
So through trial and error I have found the APN setttings that are working. You don't need a New SIM just set up your phone as I will explain.
Set Up 2 APNs one I have labeled :
Name : Internet_line
APN: att.mvno
Proxy: Not Set
Port: Not set
Username: Not set
Pass: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS PORT: 80
MCC :310Name : Internet_line
MNC: 410
Authentication Type: None
APN Type: default,supl,mms,hipri ( No spaces)
APN Proto: IPv4
APN roaming Proto : IPv4
Bearer: Unspecified
MVNO Type: None
2nd APN
Name: Straight Talk
APN: tfdata
Proxy: Not Set
Port: 80
Username: Not set
Pass: Not set
Server: Not set
MMSC: http://mms3.tracfone.com
MMS Proxy: Not Set
MMS PORT: 80
MCC :310
MNC:410
A Type: None
APN: default,supl,mms,hipri ( No spaces)
APN Proto: IPv4
APN roaming Proto : IPv4
Bearer: Unspecified
MVNO Type: None
MNC:410
Authentecation Type: PAP or CHAP
APN type:mms
APN Proto: IPv4
APN roaming Proto : IPv4
Bearer: Unspecified
MVNO Type: None
ONCE YOU HAVE SAVED BOTH NEW APNs select the INternet Line One att.mvno
and Enjoy. Just hit Thanks on my post and pass it forward Happy to be Back on Android :victory:
flojo73 said:
You Don't need a New Sim . I have one of the original At&t Sims from ST.
Okay Gents it's been a long time since I've been on Android and I am Happy to be back.
My Last post was With the EVO4G and I was waiting for the next best phone to come out and the N5 is the one.
I've looked everyhwere for APN settings for the N5 using staright talk AT&T SIM with no luck .
So through trial and error I have found the APN setttings that are working. You don't need a New SIM just set up your phone as I will explain.
Set Up 2 APNs one I have labeled :
Name : Internet_line
APN: att.mvno
Proxy: Not Set
Port: Not set
Username: Not set
Pass: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS PORT: 80
MCC :310Name : Internet_line
MNC: 410
Authentication Type: None
APN Type: default,supl,mms,hipri ( No spaces)
APN Proto: IPv4
APN roaming Proto : IPv4
Bearer: Unspecified
MVNO Type: None
2nd APN
Name: Straight Talk
APN: tfdata
Proxy: Not Set
Port: 80
Username: Not set
Pass: Not set
Server: Not set
MMSC: http://mms3.tracfone.com
MMS Proxy: Not Set
MMS PORT: 80
MCC :310
MNC:410
A Type: None
APN: default,supl,mms,hipri ( No spaces)
APN Proto: IPv4
APN roaming Proto : IPv4
Bearer: Unspecified
MVNO Type: None
MNC:410
Authentecation Type: PAP or CHAP
APN type:mms
APN Proto: IPv4
APN roaming Proto : IPv4
Bearer: Unspecified
MVNO Type: None
ONCE YOU HAVE SAVED BOTH NEW APNs select the INternet Line One att.mvno
and Enjoy. Just hit Thanks on my post and pass it forward Happy to be Back on Android :victory:
Click to expand...
Click to collapse
The settings from their website work fine for me. No problems with LTE or MMS.
http://www.straighttalkbyop.com/program.php
Auto Refill Confirmation, MMS receive works!
Good day
I authorized a NEXUS 5 Sunday, ATT Micro Sim from Straight Talk
I used the APN settings from the website, last Sunday without any luck receiving MMS messages
I tried every setting on XDA I could find without any receive MMS success
Last night I received a confirmation from Straight Talk thanking me for my Auto Refill Signup
MMS receive started working right after that, go figure.
I am on the Straight Talk APN Settings, nothing different.:good:
Dropping this here so I can find it later if I need it, and to help any soul out who hasn't had a chance to call customer service. I just edited the default APNs in the CM13.
For USA Sprint Tello Network:
Name: Sprint LTE
APN: n.mi.ispsn
Username: [email protected]
MMSC: http://mms.sprintpcs.com
MMS proxy: 68.28.31.7
MMS port: 80
MCC:310
MNC:120
APN Type: default,mms
Bearer: LTE
For MMS a new APN needs to be added (requires restart, on CM13 APN is not visible in manager, so verify it is correct on first entry)
Name: Sprint mms
APN: cinet.spcs
mmsc: http://mms.sprintpcs.com/servlets/mms
mms proxy: 68.28.31.7
proxy port: 80
APN Type: mms
bearer: LTE
toxigenicpoem said:
Dropping this here so I can find it later if I need it, and to help any soul out who hasn't had a chance to call customer service. I just edited the default APNs in the CM13.
For USA Sprint Tello Network:
Name: Sprint LTE
APN: n.mi.ispsn
Username: [email protected]
MMSC: http://mms.sprintpcs.com
MMS proxy: 68.28.31.7
MMS port: 80
MCC:310
MNC:120
APN Type: default,mms
Bearer: LTE
For MMS a new APN needs to be added (requires restart, on CM13 APN is not visible in manager, so verify it is correct on first entry)
Name: Sprint mms
APN: cinet.spcs
mmsc: http://mms.sprintpcs.com/servlets/mms
mms proxy: 68.28.31.7
proxy port: 80
APN Type: mms
bearer: LTE
Click to expand...
Click to collapse
Thank you:good:
Tello Internet/MMS 4G APN Settings For Android 10
APN access point
Name, internet
APN, n.mi.ispsn
Proxy, Not set
Port, Not set
Username, Not set
Password, Not set
Server, Not set
MMSC, http://mms.plspictures.com
MMS proxy, oap7.sprintpcs.com
MMS port, 80
MCC 312
MNC 530
Authentication type, Not set
APN type, default,mms
APN protocol, IPv4/IPv6
APN roaming protocol, IPv4
APN enable/disable, APN enabled
Bearer, eHRPD, LTE
MVNO type, GID
MVNO value, A00165FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
* The stock Android ROM shows MCC, 310, MNC, 000. But with the Lineage ROM, MCC312/MNC530 get LTE after rebooting, when the 310/000 were input manually, the APN will crash/disappear by itself.