Database Info

need some advice

Ok, so with WM6 still in its "testing" phase and a few bugs that just wont seem to go away, I am being promoted at work and it will require me to use my phone as a tool for the job. ie direct push and all. Should i go back to my carriers WM5 release or Stick with WM6 in hopes that they will fix the rumored direct push issues?

i never got a direct pus problem on wm6... I use my mobile for work and i am using mb edition. I think is quite ok... on Faria`s i got some problems with gprs switching on and off all the time.... strange....

I've never used direct push. how do I go about setting it up. I can put together an exchange box if needed

nottoosmart said:
Ok, so with WM6 still in its "testing" phase and a few bugs that just wont seem to go away, I am being promoted at work and it will require me to use my phone as a tool for the job. ie direct push and all. Should i go back to my carriers WM5 release or Stick with WM6 in hopes that they will fix the rumored direct push issues?
Click to expand...
Click to collapse
I have experimented with all the WM6 releases, and have not encountered any issues at all with push mail and my Exchange 2003 Server. Within a couple of seconds of a new e-mail reaching my desktop, it hits my phone.
I also have my POP3 account check for messages at 1 hour intervals. No probs there either.

I was one of the unlucky ones who did have a problem with push email on Farias WM6 ROM. It would sync the first time the phone was switched on, but then some time later would randomly stop working even though the GPRS connection was still up and Activesync said it was 'Connected' - only a manual resync would get it going again.
I tried multiple radio ROMS, 2.19, 2.25, 2.47 and 2.61 (hoping it was a radio ROM problem) but to no avail. Interestingly, I never had this particular problem with the MB WM6 rom - but that ROM had other issues, so in the end (as always) I've dropped back to Farias 3.3 ROM which is rock solid in every area.
Don't get me wrong those of you who take offence easily - Farias ROMS are great and I'm not knocking him any way - it's just "one of those things" that's probably quirky to my setup. If when he produces a new version, I'll test again.
Andrew

Most odd. Like bradsnw I've never had a direct push problem. This includes the more than 50 individual devices I've setup in the past, the 10 or so that I upgrade on a regular basis and mine. As Faria's tester and Junior Chef in Training my poor lil 8125 has seen just about every ROM variant (and mutant) imaginable, but never a DP problem. (And I've created some near bricking ROM's let me tell you!)
One thing I always do however is to not create my initial AS profile with my PC but on my device directly. (This is the only way I can get my task OTA) and I probably hard reset my device on the shoulder of Interstate 95 or a McDonalds parking lot as many times as I do at home.

I've never had an issue with Direct Push/Exchange 2003 while using WM6 either.

Dr Puttingham said:
Most odd. Like bradsnw I've never had a direct push problem. This includes the more than 50 individual devices I've setup in the past, the 10 or so that I upgrade on a regular basis and mine. As Faria's tester and Junior Chef in Training my poor lil 8125 has seen just about every ROM variant (and mutant) imaginable, but never a DP problem. (And I've created some near bricking ROM's let me tell you!)
Click to expand...
Click to collapse
I agree - very odd. I've never had push fail before on the multitude of ROMS I've tried - those sort of problems always happened 'to other people' and not me ;^)
I tried all the usual stuff, resets, new partnerships, reloading the same ROM, new radio ROMS, certificates, etc etc etc. But in the end, I had to get the phone working 'for work', so went back to 3.3. Like I said, when Farias next ROM comes out, I'll try it again.
cheers,
Andrew

achick said:
I was one of the unlucky ones who did have a problem with push email on Farias WM6 ROM. It would sync the first time the phone was switched on, but then some time later would randomly stop working even though the GPRS connection was still up and Activesync said it was 'Connected' - only a manual resync would get it going again.
I tried multiple radio ROMS, 2.19, 2.25, 2.47 and 2.61 (hoping it was a radio ROM problem) but to no avail. Interestingly, I never had this particular problem with the MB WM6 rom - but that ROM had other issues, so in the end (as always) I've dropped back to Farias 3.3 ROM which is rock solid in every area.
Don't get me wrong those of you who take offence easily - Farias ROMS are great and I'm not knocking him any way - it's just "one of those things" that's probably quirky to my setup. If when he produces a new version, I'll test again.
Andrew
Click to expand...
Click to collapse
There's nothing wrong with your push email.
Connected is good, it means that you have a connection with the server and you're up to date. This is how it shows in WM6
When you see "Synchronized Today" with a time, this means that was the last time your device updated with the server for whatever [email protected] tihs point, if you have signal....do a manual sync.
Again...CONNECTED...is good ......... SYNCHRONIZED TODAY...is ok
If your device doesnt synchronize folders at all ....you need to adjust your network connections and get the web to work 1st and then push email.
This isn't faria specific, that's how WM6 works.

nottoosmart said:
I've never used direct push. how do I go about setting it up. I can put together an exchange box if needed
Click to expand...
Click to collapse
You need an exchange account.
I use www.4smartphone.com. It's a paid service that's cheap and I let them deal with the headaches of maintaining a server. The service has been 100% so far, not to try to sell you.
If you have the means and time to set up a box, let me know and I'll help as much as I can.

No problem at all with DP mail. I just give it to the people at IT and they set it up nicely for me. And I have taken it in daily because I keep changing roms!
But I am stopping at Faria's for now

dwny said:
There's nothing wrong with your push email.
Connected is good, it means that you have a connection with the server and you're up to date. This is how it shows in WM6
When you see "Synchronized Today" with a time, this means that was the last time your device updated with the server for whatever [email protected] tihs point, if you have signal....do a manual sync.
Again...CONNECTED...is good ......... SYNCHRONIZED TODAY...is ok
If your device doesnt synchronize folders at all ....you need to adjust your network connections and get the web to work 1st and then push email.
This isn't faria specific, that's how WM6 works.
Click to expand...
Click to collapse
dwny, I appreciate your reply, but I beg to differ. I've been using push mail for a long time now, and I know when it's working or not - I'm not going to bore everybody with pointless detail, but:
I had a working internet connection via GPRS - I could surf using Pocket IE.
It would "automatically" sync my folders via GPRS when I turned the phone on. It would then stop working later.
Manually syncing is not push email? I had set the schedule settings to 'as items arrive' - why would I sync manually?
And as I said previously, I did not get the problem with the MB WM6 rom, nor the PDAviet 3 or 4 and I do not get the problem with Farias 3.3. Mail arrives automatically via GPRS (usually a a few seconds before it hits my desktop outlook) just fine in every ROM I've tried except Faria's latest. But I'll repeat - I'm not in any way 'blaming' Faria. It's just one of those things.
Andrew

achick said:
dwny, I appreciate your reply, but I beg to differ. I've been using push mail for a long time now, and I know when it's working or not - I'm not going to bore everybody with pointless detail, but:
I had a working internet connection via GPRS - I could surf using Pocket IE.
It would "automatically" sync my folders via GPRS when I turned the phone on. It would then stop working later.
Manually syncing is not push email? I had set the schedule settings to 'as items arrive' - why would I sync manually?
And as I said previously, I did not get the problem with the MB WM6 rom, nor the PDAviet 3 or 4 and I do not get the problem with Farias 3.3. Mail arrives automatically via GPRS (usually a a few seconds before it hits my desktop outlook) just fine in every ROM I've tried except Faria's latest. But I'll repeat - I'm not in any way 'blaming' Faria. It's just one of those things.
Andrew
Click to expand...
Click to collapse
Again...this is how it works in WM6
When your device says "Connected" ... you are up to date.
While there..press Menu > Status and it will tell you when your device last synchronized.
WM5 shows "last synchronized" when up to date
WM6 shows "last synchronized" when not up to date.
What I experienced:
When I get "last synchronized" ... I also don't have internet and everything was working. I go to connections and change the name of the connection and all is well. Try this & see if it works for you.....

dwny, you ARE persistant!
"Again...this is how it works in WM6"
But it *wasn't* working!
I could tell it was not sychronizing because I would get 25 emails arriving in my Outlook inbox over period of an hour, and none of them arrived on my PDA! If I simply manually synced, they would all coming flooding in.
But let's not dwell on this anymore - I'm back on 3.3 now. If I find some time, I'll do a fresh download of the ROM and try again.
thanks for you time,
Andrew

Outlook
First, you get too damn much email. 25/hour? What are you, the president?
Seriously though, something has to be running to be able to get those push notifications. With all the tweaking people do I'm not surprised that things end up breaking. My suggestions are these:
1) Turn off X Button or whatever you are currently using to close rather than hide applications. WM5 and 6 were never designed for the apps to be closed every time. Many have background features that they depend on -- like poutlook. Why do you think it's in your \windows\startup folder.
2) It is *still* in your \windows\startup folder right?
Those are your hints -- all I know is that push worked fine for me as long as I left something there to push to.

baarod said:
First, you get too damn much email. 25/hour? What are you, the president?
Seriously though, something has to be running to be able to get those push notifications. With all the tweaking people do I'm not surprised that things end up breaking. My suggestions are these:
1) Turn off X Button or whatever you are currently using to close rather than hide applications. WM5 and 6 were never designed for the apps to be closed every time. Many have background features that they depend on -- like poutlook. Why do you think it's in your \windows\startup folder.
2) It is *still* in your \windows\startup folder right?
Those are your hints -- all I know is that push worked fine for me as long as I left something there to push to.
Click to expand...
Click to collapse
President? - lol... I wish...
I get automated warnings and messages from databases and servers. And when things aren't running well, I get LOTS of emails.
Yep, poutlook was in my startup....
Anyway, after seeing all these success stories, I downloaded the ROM again (didn't trust the last download) and reflashed. Followed exactly the same procedure as normal (I flash ROMS regularly, so literally have my set routine) and guess what?
Works fine - 'straight out of the box'. I did nothing different to every other flash I've ever done....
Andrew
P.S. I now have an 'officially recognised' issue with the 2.61 radio ROM. But at least I'm back in the fold...

i am running the mun rom on tmobile usa and have no problems with exhange mail...push is working 100%
FYI - i am using the 2.61.11 radio rom

achick said:
President? - lol... I wish...
I get automated warnings and messages from databases and servers. And when things aren't running well, I get LOTS of emails.
Yep, poutlook was in my startup....
Anyway, after seeing all these success stories, I downloaded the ROM again (didn't trust the last download) and reflashed. Followed exactly the same procedure as normal (I flash ROMS regularly, so literally have my set routine) and guess what?
Works fine - 'straight out of the box'. I did nothing different to every other flash I've ever done....
Andrew
P.S. I now have an 'officially recognised' issue with the 2.61 radio ROM. But at least I'm back in the fold...
Click to expand...
Click to collapse
Glad to see a fresh install worked for you.
Be careful with radio 2.61.11, it's known to cause dialpad issues and missed calls with the newer roms.

MMS messaging not working

i am running wm6 most beautiful addition on my g4 cid locked device and i cant get the mms to work if by any chance anyone has figure this out on t mobile USA it would be greatly appreciated..or if they could re right the guide that t mobile has that would be fantastic.
http://tmobileus.wdsglobal.com/mms?...mobileNumber=&captchaEnabled=true&service=mms
thats the t-mobile guide
thanks in advance

The T-Mobile guide is written for a device still using a T-Mobile ROM which is why it doesn't seem to make sense when you're using WM6.
I have an MDA and I've also had issues getting MMS to work under any WM6 ROM I've tried so far.
If anyone has any suggestions...
Dave

The TMobile Settings Guide in that link WILL still work. I am running Faria's WM6 ROM (quite happily I might add), just did the TMo settings myself on my CID unlocked TMo MDA about half an hour ago and MMS is now working again.
Just do EXACTLY what the directions say and your MMS will work again.

I did EXACTLY word for word and my MMS still not working...it starts to send then just dies out....and msg is moved to the drafts folder.

Ranger666 said:
I did EXACTLY word for word and my MMS still not working...it starts to send then just dies out....and msg is moved to the drafts folder.
Click to expand...
Click to collapse
I have to ask since I had the same problem at first...
Did you try a manual power cycle (not pressing the soft reset button on the side or a software soft reset but actually pressing the power button for 3 seconds, letting it sit off for a few seconds and turning it back on)?
I found that with the Faria ROM, to get some changes to "stick" you have to power cycle your MDA after each and every change. Takes a while and it's a PITA, but it has solved 99% of the problems that I was having with the ROM.
If you HAVE done that already, then I dunno what to tell you guys...my condolences? JK but there has to be a permanent fix or a CAB out there somewhere...

Well, I hadn't tried the full reset was just doing a soft reset. Tried it and still same. I don't know what the issue is....lot of people are not able to send MMS. Text messaging works fine. I'll just keep trying to mess with it and hope someone finds a solution before I do.

Ranger666 said:
Well, I hadn't tried the full reset was just doing a soft reset. Tried it and still same. I don't know what the issue is....lot of people are not able to send MMS. Text messaging works fine. I'll just keep trying to mess with it and hope someone finds a solution before I do.
Click to expand...
Click to collapse
I finally remembered what the "deal" is... the MMS instructions for TMobile has a minor error:216.155.165.050 should be:216.155.165.50
Note the lack of the zero before the .50
Give it a whirl, let me know.
--M
PS I added it to the Wiki for the next time I forget how to fix it.

Hmmm... I'll have to give that a shot. I've been using the 050 per the steps and all it would do when I tried to send a test MMS was move the message to the drafts folder and never send it.
I've got the normal T-Mobile ROM on my MDA right now and I plan on flashing it over to the Faria ROM later on today.
I'll post the results when I'm able to test it.
Dave

.50 NOT .050 : BUT Crossbow receives SMALL MMS pictures
I agree. I ran into the same problem with my very first Crossbow rom. Changing the server gateway is 216.155.165.50
NOTE it ends in .50 not .050 . This worked for me
BIG problem with crossbow roms right now: Receiving pictures messages are VERY small. They will be downsized to 160x120 and less than 15kb. 'til this day i still haven't figured out how to fix that. At first i thought it was the Arcsoft registry settings, but i have meddled through the arcsoft registry settings so many times. I think there is something else in the crossbow roms that is capping the receiving size. I have set all receiving registry settings to receive pictures in their original form or 640x480, but they still keep coming at 160x120. You can test this by sending a picture to yourself (note its size before sending it) or having someone else send you a picture. Good luck!

Hot Diggity Dawg!!
It worked like a charm. Sweeeet! Thanks for the help. I didn't even think about the server being wrong, I figured T-Mobile knew what they were doing. Guess not. XDA Dev got 'em beat.

Yep, using .50 instead of .050 worked fine for me here, too. Thanks!
Dave

are you able to send and receive? i am only able to receive. i have followed the instructions and am still not ablt to send. i am using the t-zones plan with proxy...

johnnylavah said:
are you able to send and receive? i am only able to receive. i have followed the instructions and am still not ablt to send. i am using the t-zones plan with proxy...
Click to expand...
Click to collapse
I sent to my old Verizon phone (which is still working until the 23rd so I've been using it as a test phone lately) and it worked fine. I sent a picture I took with the Verizon phone to the MDA and it received. However, I did get the 160x220 or whatever size it is on the MDA. It works, though. I'll worry about other issues later.
Something I am noticing now is that whenever I connect using IE, it uses the MMS profile I set up instead of the GRPS one I set up first. It works, so no big deal. I guess.
Dave

sgtcasey said:
I sent to my old Verizon phone (which is still working until the 23rd so I've been using it as a test phone lately) and it worked fine. I sent a picture I took with the Verizon phone to the MDA and it received. However, I did get the 160x220 or whatever size it is on the MDA. It works, though. I'll worry about other issues later.
Something I am noticing now is that whenever I connect using IE, it uses the MMS profile I set up instead of the GRPS one I set up first. It works, so no big deal. I guess.
Dave
Click to expand...
Click to collapse
Outgoing files from the MDA will be in full size. But for some reason, with the new crossbow roms, all INCOMING pictures will the thumbnail size (160x120). This is NOT normal. If you use the standard roms, or Xelecins Custom 2.26 rom, you will notice that you get the full size image. I have been trying to find a fix for this ever since the first cooked crossbow WM6 rom... its annoying

Incoming Picture Size Setting
My friend just sent me a picture through MMS and it cam through at 320x240. How is this possible you ask? Under your MMS configuration, >preferences
There is a drop down menu that allows you to choose the photo resolution. Just pick "orignal" instead of the default setting

Ranger666 said:
It worked like a charm. Sweeeet! Thanks for the help. I didn't even think about the server being wrong, I figured T-Mobile knew what they were doing. Guess not. XDA Dev got 'em beat.
Click to expand...
Click to collapse
ok, so i set this up on my TYTN (with WM6, thx to this sweet forum).
a buddy with a moto q on sprint tried to send me a pic, but it came as a text with a http link (to sprintpcs.com). i suspect that issue was on his end.
heres the kicker - i hit the link, and IE opened, and went to the page, even though I had wlan off (i.e. it used the picturemessage connection to get there)! i tried going to google, and that worked as well! is this some form of t-zones or tmobileweb? i only have the 1000 min family plan, and i don't have any internet services added to my account. could this actually be some form of simple free proxy-based web browsing?
...or am I going to get bent over on my next bill for some previously unknown pay-by-the-kb-or-minute fees...
please advise.
Al

falconeyez said:
My friend just sent me a picture through MMS and it cam through at 320x240. How is this possible you ask? Under your MMS configuration, >preferences
There is a drop down menu that allows you to choose the photo resolution. Just pick "orignal" instead of the default setting
Click to expand...
Click to collapse
Mine has been set to original and on occasion 640x480. It makes no difference. They all come in at 160x120 or smaller. Are you sure u're using crossbow WM6? Cuz so far, i've been hearing other ppl with the same problem. We all have our settings at "Original"

All pics coming in to me with MBE, mUn, and Faria WM6 roms come to me 160x120 (and I've had a couple come in smaller than that even). I'm set to Original, and I've even changed it to other settings and back again. Can't seem to figure out why this is happening.

allynm said:
a buddy with a moto q on sprint tried to send me a pic, but it came as a text with a http link (to sprintpcs.com). i suspect that issue was on his end.
please advise.
Al
Click to expand...
Click to collapse
That is a sprint issue...my brother has sprint also.
allynm said:
...or am I going to get bent over on my next bill for some previously unknown pay-by-the-kb-or-minute fees...
please advise.
Al
Click to expand...
Click to collapse
Unfortunately, you will get charged for the per minute data usage.

Ranger666 said:
Unfortunately, you will get charged for the per minute data usage.
Click to expand...
Click to collapse
Thanks for the reply. Does the per minute data usage work the same as the voice usage (i.e. if I have unlimited nights and weekends for voice, would the same apply to data)? Or is this a seperate rate? Is there a page detailing this at the T-Mobile site somewhere? I searched for the better part of an hour and could find no specifics.
Thanks in advance.
Al

[Issues] Open Touch v4.0 | WM 6.1 | T-Mobile Wing!

Folks,
I'm starting this new thread since the release one is getting way too big to manager.
Please start posting issues related to my rom here, make sure they are actual issues and not user error.
Regards,

Windows Live / Hotmail Problems
Does anyone else have problems getting Windows Live to sync your hotmail? I finally got it working with the push support, but it does not allow me to download attachments. Anytime I try to download an attachment it says failed to sync. I've tried the 3 latest versions available from this board and none of them seem to work. I've also tried these combinations with both versions of biggy 4.0 to no avail. With open touch 3.0 (Windows live biggie) the Windows Live service was working perfectly. I can't imagine that having windows live built into the Rom was what made the difference. Any one have any ideas? If this is simply an unfixable bug do you know if the gmail imap works like a push client? I tried to configure gmail, but it wouldn't allow anything quicker than a check every 5 mins.
Once again thanks ttran for your hard work in creating this great rom. Without it I'd probably be an iSheep by now.
thanks in advance

Not sure if this is an operator error or the rom error but I installed the Black Dialer from this link http://forum.xda-developers.com/showpost.php?p=1649317&postcount=1
I followed the instructions and did a soft reset, after that the Micro v4.1 run really sloooow. I have to perform a hard reset and reinstall all the other cabs.
So is it because I installed the wrong dialer cab or is it something wrong with the Micro v4.1? Whatever reason is I hope this is a good info for other ppl, too.
Other than that the Micro v4.1 run amazing fast and I do miss the black dial from the Lite Black version

when i added the battery to my toolbar and decided to take it off, the taskmanager that was up there disappeared, i cant get it back

djkdawg said:
when i added the battery to my toolbar and decided to take it off, the taskmanager that was up there disappeared, i cant get it back
Click to expand...
Click to collapse
I was all ready to get mad....break out the flamethowers and what not, but after testing this is CONFIRMED. I added percent and mem feedback to the screen using QM, removed them and could not reenable htc task mgr. I want to say there used to be an option in the HTC x-button settings to show on today screen. That option is not there. Currently searching for the reg key.... will update post

high pitch noise comming from the speaker after flashing the rom

pixelwix said:
high pitch noise comming from the speaker after flashing the rom
Click to expand...
Click to collapse
Using battery status?? I get the noise while using the cpu scaler UNDERclocking below 149. If it annoys you that much raise your min to 149. Otherwise, just try setting different processor speeds...dont over do it, see if that doesnt help.

ttran...I finally resolved my problem with Pocket Nester! Turns out it was user error... I had the files on my storage card in My Documents instead of having them at the root level. I noticed that it was seeing some of the folders on the storage card but none of the ones in My Documents. I moved them to the root of the storage card and it works!

since there is talk about the dialer i thought i would ask... in OT Biggy 3.0 the dialer had buttons that were quite large.
in this version the dialer is alot better, because it has the contacts built right into it at the top. however there is alot of space between the buttons, making them too small for my fingers.
is there a skin that just makes the dialer buttons bigger without downgrading back to the 3.0 version?
great work ttran, i am running 4.0 biggy w/ cube... just fyi and no issues thus far (only been testing for 2 days though)

Radio issue?
I'm not sure if this is a radio issue or something else, but here goes.
I flashed the lite black rom late last week.
I've been running a BT GPS for a while now with this phone. I've had my BT headset paired as well. I can use both at the same time. Monday, while talking on the headset, it just ended the call spontaneously. A few minutes later, after getting a call back on, it just ended the BT portion, and I had to actually pick up the phone (Horrors!)
Today, the cell phone side seems to be having troubles. (I've not tried the BT headset again, but still running the GPS) Several times I have had a "!" next to the phone icon in place of a signal strength meter... no signal or some error. I've had connection errors with the GPRS as well.
I may try out the micro with the newer radio in it, or look more into flashing an older radio version on here.
Let me know if you need any more details.

dirtisgood said:
I'm not sure if this is a radio issue or something else, but here goes.
I flashed the lite black rom late last week.
I've been running a BT GPS for a while now with this phone. I've had my BT headset paired as well. I can use both at the same time. Monday, while talking on the headset, it just ended the call spontaneously. A few minutes later, after getting a call back on, it just ended the BT portion, and I had to actually pick up the phone (Horrors!)
Today, the cell phone side seems to be having troubles. (I've not tried the BT headset again, but still running the GPS) Several times I have had a "!" next to the phone icon in place of a signal strength meter... no signal or some error. I've had connection errors with the GPRS as well.
I may try out the micro with the newer radio in it, or look more into flashing an older radio version on here.
Let me know if you need any more details.
Click to expand...
Click to collapse
Hi,
I'm aware of the issues with the current radio, that why I posted the old radio and splash from v3.0.
Please go back to the first page of the actual release page for v4.0 to download it.

joking said:
Not sure if this is an operator error or the rom error but I installed the Black Dialer from this link http://forum.xda-developers.com/showpost.php?p=1649317&postcount=1
I followed the instructions and did a soft reset, after that the Micro v4.1 run really sloooow. I have to perform a hard reset and reinstall all the other cabs.
So is it because I installed the wrong dialer cab or is it something wrong with the Micro v4.1? Whatever reason is I hope this is a good info for other ppl, too.
Other than that the Micro v4.1 run amazing fast and I do miss the black dial from the Lite Black version
Click to expand...
Click to collapse
The dialer I used for v4.0 is different than any others. I did not include it in the micro since there are so many people with different wants and needs.
Some dont like the color of the dialer, some don't like the way the buttons are too small, and etc.
Thus I just plan left it out, so you the user can install a different dialer on top of the existing one.
But I think the one you try to use does not work correctly as a cab.
I've tested the micro version by installing different dialers with success.
I will try and locate a similar dilaer to mine or just create a cab for you folks as soon as I get some free time.
I still need to post different colors for the back ground as well.
Been busy working on my personal rom which will be for version 5.0 and the other versions of 4.0.

i'm using OT 4.0 biggy vista and everytime I set the backlight option to turn off after 3 minutes instead of 30 seconds and the power to turn off in 5 minutes instead of 2 as soon as the power goes off and I turn it on it's right back to 30 seconds and 2 minutes. This ain't a major issue it's just a pain in the ass cuz i'm using slide to unlock and evry 30 seconds I have to keep unlocking it.

nextpimp said:
I was all ready to get mad....break out the flamethowers and what not, but after testing this is CONFIRMED. I added percent and mem feedback to the screen using QM, removed them and could not reenable htc task mgr. I want to say there used to be an option in the HTC x-button settings to show on today screen. That option is not there. Currently searching for the reg key.... will update post
Click to expand...
Click to collapse
I personally like it that way better, That way the HTC task manager and the OK button dont overlap and creat confusion. Instead, I use Quickmenu since that has it's own task manager. It shows you what's running and you can close them as well using Quickmenu.
Take a look into it

ttran001 said:
Been busy working on my personal rom which will be for version 5.0 and the other versions of 4.0.
Click to expand...
Click to collapse
I'm more then willing to Beta test 5.0 when ready let me know!

nKiwan said:
I'm more then willing to Beta test 5.0 when ready let me know!
Click to expand...
Click to collapse
I'm game too.

ttran001 said:
The dialer I used for v4.0 is different than any others. I did not include it in the micro since there are so many people with different wants and needs.
Some dont like the color of the dialer, some don't like the way the buttons are too small, and etc.
Thus I just plan left it out, so you the user can install a different dialer on top of the existing one.
But I think the one you try to use does not work correctly as a cab.
I've tested the micro version by installing different dialers with success.
I will try and locate a similar dilaer to mine or just create a cab for you folks as soon as I get some free time.
I still need to post different colors for the back ground as well.
Been busy working on my personal rom which will be for version 5.0 and the other versions of 4.0.
Click to expand...
Click to collapse
Yes you're right. I had to hard reset the Wing since that Black dialer doesn't have the removed option. Well it's a learning experience for me too. And fortunately that v4.1 is UC, all I need to do is remove those cabs from the SDConfig.txt file and re-run it again and voila all the cabs I need is back on the Wing.
Can't wait till you post the cab for the dialer.
So far I love the Lite Black but I like the speed on the Micro better. That's why I try to get the Micro as much closer to the Lite Black as possible.
1 more thing I notice on the Micro, after installed "JUVS HTC Home.v2_1_1005722_s0" cab sometime when I switch back to the home the area where the HTC Home should be got "scramble" for about 2 sec. I still try to duplicate it and report back. It already happened to me 2 times today.

now people have to read 2 threads for 1 rom....... mhhhhhhh.

Just can say Thanks for your great rom.!
It runs perfect..

papamopps said:
now people have to read 2 threads for 1 rom....... mhhhhhhh.
Click to expand...
Click to collapse
This is why "Tab browser" kick in

MMS Slow....taking 3 hours for person to get message

I have tried to mess around with 6.1 lately and for some reason I am not able to figure this out.....
I get everything working, for what I think but then I keep having problems with the MMS. I will send my wife a test message and it takes over 3 hours to get to her. When I am running WM6 with radio 1.27.14.09 it works fine, takes less then 2 minutes to get to her phone.
Now before you start grilling me, I have done a google search. I have found problems such as
1. unable to send at all - not my problem
2. MMS not working - not my problem again (works just really slow)
3. Use this cab, use that cab, I have tried them all they don't change the issue
4. Make sure your going through MEdiaNet - I am
So what I am asking, is anyone else experiencing this problem???? The only thing I have looked into is it possibly an arcsoft issue???

I don't know if this will help, but I'm finding that with the 6.1 roms on AT&T that if you allow the Network Configurator to run, various things don't seem to work quite right. I was having issues with WeatherPanel not working on the AT&T network. I've now flashed 3 different 6.1 roms in the last couple of days and did not allow the network config to setup the AT&T settings, and then disabled it (when the next screen came up). After doing this, I then ran the remove hidden proxy cab and the WAP/MMS setup cab and then did a soft reset. Now MMS works fine (I never had the 3 hour delay you described, but I did have other issues with MMS on some of the roms) and WeatherPanel also now works (haven't had a problem with it in over 24 hours where before it might or might not work, then would stop working a few hours later).
Like I said, may not help your situation, but something to consider and try.
NOTE: The method I just laid out will NOT set up isp.cingular. Only Cingular GPRS and MEdiaNet. This is how I used to always run my Wizard and dumped the $40 per month PDA Connect plan for the $20 per month Unlimited MEdiaNet.

I could hug you!!!! Oh my god, do you feel my love...do you feel me humping your leg!!!!!! It worked,,,,absolutely amazing....Thank you!!!!

Glad it worked for you, but wow, not sure about the extent of the emotion you are sending in my direction... LOL
So for future people that hit this, did you remove the other settings, just install these two cabs, hard reset and follow my above directions, or what? Just curious myself as I'd like to get to the bottom of what goes wrong (or is missed) with the Network Configuator process for AT&T.

To tell you the truth, it stopped working later that night!! I had Dutty's ROM installed , hard reseted , installed the two cabs and it worked. Then I tried sending another pic to make sure it worked about 10 minutes later.... I took 5 hours to get to my wifes phone....
It has to do something with the radio's. I tried a bunch and none work. I'll just wait till the Official 6.1 comes out for ATT and look at the settings.....
Thanks anyways!!!

if your phone said message sent then it arrived 3 hours later to the recipient then its a network problem not really to do with your phone but just incase look at other radios.

ryncppr said:
To tell you the truth, it stopped working later that night!! I had Dutty's ROM installed , hard reseted , installed the two cabs and it worked. Then I tried sending another pic to make sure it worked about 10 minutes later.... I took 5 hours to get to my wifes phone....
It has to do something with the radio's. I tried a bunch and none work. I'll just wait till the Official 6.1 comes out for ATT and look at the settings.....
Thanks anyways!!!
Click to expand...
Click to collapse
http://www.4shared.com/file/42213585/9e4a069f/ATT_Settings_DNS__TCPIP.html?dirPwdVerified=745d7988
Try this .cab

AllTheWay said:
http://www.4shared.com/file/42213585/9e4a069f/ATT_Settings_DNS__TCPIP.html?dirPwdVerified=745d7988
Try this .cab
Click to expand...
Click to collapse
Looks like this just changes some TCP parameters and such. Is that correct? So you would use this in addition to the WAP MMS cab I posted earlier I assume.

mfrazzz said:
Looks like this just changes some TCP parameters and such. Is that correct? So you would use this in addition to the WAP MMS cab I posted earlier I assume.
Click to expand...
Click to collapse
It changes some TCP parameters and puts in the IP header compression and the DNS servers.

I really do not know what the problem is.... those didn't work either. It honestly might be something in my area, South Florida. I tried with the new radio, those files and vice versa. I am dumfounded.
As soon as I flashed back to 6.0 and used the 1.27 radio it sends immediately. It must have something to do with the radio and my area.
I appreciate all the assistance

I have the same problem. I received my tytn II 2 days ago. Previously I used the se K800i. With the k800i, there was never a problem when sending sms messages. Always very fast to send and receive but now on my kaiser, it takes a long time before my messages are received or till I receive an sms message.
Still on the stock rom version 1.56.404.6
radio: 1.27.12.32
Windows mobile 6 professional.

3.55.DK.02, UC 2.0 Compliant, Supa-Clean [7/14/2008]

Sorry this one took so long. I've been out of the loop for a while and missed incognitho's post. Anyways...
3.55.DK.02 Based on CE OS 5.2.19214 (provided by incognitho)
http://forum.xda-developers.com/showthread.php?t=400276
Storage: 163.67MB Total, about 3MB In Use, about 160MB Free
Program: 85.32MB Total, about 31MB In Use (after soft reset), about 54MB Free
This rom starts where my older roms left off as far as "stripped down-ness" . My roms have AT&T connnection settings by default so no need to install and run HTC Connection Setup if you are an AT&T customer. Keyboard is Tilt layout so install KaiserKeyboard.cab attached below to change to Kaiser layout.
3.55.DK.02
- Fixed wake from sleep bug
3.55.DK.01
- Removed Internet Sharing 6.1
- Disabled Error Reporting
3.55.DK.00, some notes
- Still very stripped down
- SQM still gone
- Enjoy!!
3.55.DK.02 download linkage, no cabs
http://rapidshare.com/files/129687084/3.55.DK.02.rar
3.55.DK.01 download linkage with cabs (list in pic below)
http://rapidshare.com/files/125451033/3.55.DK.01_with_CABS.rar
Radio Thread (1.65.20.29 - I recommend this radio, Thanks to P1Tater):
http://forum.xda-developers.com/showthread.php?t=391714
click me if you wanna give a me a little somethin'

this one is mine for later, just in case.

Here is a mirror for you.
http://www.4shared.com/file/52707456/9d4a6c95/355DK00__CABS.html

I'm downloading now & will test it to see if the same BBC issue I had before is gone.
If it is, I'll be switching back to this from the L26 Diamond V8 Light.

johnny, thanks for the mirror.
idj, any luck with blackberry connect?

akadonny,
so is this just a stripped down version of the ROM or do you have applications to it?

hey ecl. it's nearly identical to my last one (3.53). it has a slightly updated os (19214 up from 19213), has a few registry tweaks and i built in the ringtone fix that i left out of last rom.
i included new cabs in the download for you to install as you see fit. they're all cabs i install with UC. i use others too like igo8 and tomtom 7, but posting them would be warez.

akadonny,
thanks for the info. I'll give it a whirl this weekend. Leave feedback when I do.
Thanks.

ahhh something clean..will give this a whirl. Thanks

akadonny said:
johnny, thanks for the mirror.
idj, any luck with blackberry connect?
Click to expand...
Click to collapse
The phone kept locking up on me for some reason.
I'm still not sure why it keeps having issues with freezing up. I'm going to poke around some more & remove my sdconfig.txt to make sure I'm starting totally clean.
I really only use a small set of apps, which is why I am somewhat stumped by this.

i'm not sure what would be causing lockups. i purposely held out on releasing this rom for a week so I could thoroughly test it. do you get lockups with no software or with just the cabs I provided? if you tell me what u use I can try testing it for ya.
also, what SPL are u running? i heard from some that using the spl that comes with the rom version helps in SOD and lockups. check my sig. it has a link to jockyw's hard spl's.

I have been having all kinds of problems with the ROM. When opening IE (for example), IE briefly starts but then I start getting hit with iexplorer.exe, shell32.dll, and other Windows error messages. Same thing with opening some items in the Settings menu. I've hard reset following the ROM install, and I've also reflashed the ROM. I'm running HardSPL-3.56 and Radio 1.58.25.17. I'm going to redownload the ROM and try again. I will also try another radio to see if the issue becomes resolved. I'll give a heads up.

akadonny said:
i'm not sure what would be causing lockups. i purposely held out on releasing this rom for a week so I could thoroughly test it. do you get lockups with no software or with just the cabs I provided? if you tell me what u use I can try testing it for ya.
also, what SPL are u running? i heard from some that using the spl that comes with the rom version helps in SOD and lockups. check my sig. it has a link to jockyw's hard spl's.
Click to expand...
Click to collapse
Already running 3.56 Hard on there for the SPL.
Resco 2008 (Explorer, Registry, & Today Plug-in)
HTC Home
MS Office & OneNote 6.1
S2U2 1.05
Pocket RAR 3.71
Tillanosoft PocketNotepad
XnView Pocket
WisBar Advance 3.2b
BBConnect .100

Couldn't get into Settings \ Connections \ Connections after a fresh load.
Continual blank error reporting messages (send / don't send)

$hit.
I don't have any of these problems on my Tilt. I'm gonna go grab my co-workers Tilt and load my rom on it. I'll use my rapidshare copy so I'm on the same page as you guys. You guys shouldn't be having these issues. Like I said before I purposely held off on releasing this to work out the bugs. Anyways, be back in a bit.

akadonny said:
$hit.
I don't have any of these problems on my Tilt. I'm gonna go grab my co-workers Tilt and load my rom on it. I'll use my rapidshare copy so I'm on the same page as you guys. You guys shouldn't be having these issues. Like I said before I purposely held off on releasing this to work out the bugs. Anyways, be back in a bit.
Click to expand...
Click to collapse
No problem, akadonny. So far, I love the ROM. Apparently, for me at least, it appears that the issue may be related with the network settings. When I open IE, Phone, Connections, I get the errors.
UPDATE: Well, just tested all of the above now... NO PROBLEMS!?!? I'm going to hard reset again and see if the issues come back. I'll post results.
Odd thing is I've flashed 3 or 4 times and hard/soft reset countless times, but had the problems mentioned above everytime. Interesting.

idj1975 said:
Couldn't get into Settings \ Connections \ Connections after a fresh load.
Continual blank error reporting messages (send / don't send)
Click to expand...
Click to collapse
I just did another flash & reset to see what happened.
No other apps installed & when going into connections with the USB cable plugged in, it rebooted my phone entirely...

KMFM$ said:
No problem, akadonny. So far, I love the ROM. Apparently, for me at least, it appears that the issue may be related with the network settings. When I open IE, Phone, Connections, I get the errors.
UPDATE: Well, just tested all of the above now... NO PROBLEMS!?!? I'm going to hard reset again and see if the issues come back. I'll post results.
Odd thing is I've flashed 3 or 4 times and hard/soft reset countless times, but had the problems mentioned above everytime. Interesting.
Click to expand...
Click to collapse
So glad it's working for you. Wonder why that happened.
So I just ran through the entire process of jump spl, hard spl, flash, install (a lot of crap via UC) and customize. My co-worker's Tilt works perfectly. Albeit it's only been a few minutes now, but no issues going into Connections, no random lock ups or reboots. If you look at the last pick closely you'll notice this guys Tilt has been in his dogs mouth a few times and it still works great.
I'll let you know if he reports any issues.
idj, do you have problems with any other roms? I suppose you don't or you probably would have gotton your phone replaced. Could you possibly have a hardware problem that's causing your issues? Just so you know I'm on my 4th Tilt now. First - USB plug got bent, Second - Keyboard stopped responding, Third - wouldn't accept button combo's to get into bootloader or hard reset.

akadonny, I also get the windows errors when opening IE. Dunno what the problem is but hope they get fixed because I need a clean rom I'm also using 3.56 hard and the niki/neon radio..

Hey, akadonny. Could you try something for me? Flash to the niki/neon radio (1.58.25.17) and see if you have issues then? You're using the 1.65.20.29 radio and not having any problems. But from the sounds of it idj1975, xidium, and I are having problems and using the 1.58.25.17 radio. Again, I'm going to try that radio here in a few minutes and then I'll post back.
BTW, after the reset (I tried a soft reset before a hard one) the issues came back. . Trying the new radio now.