Universal reboots with WM6 - JASJAR, XDA Exec, MDA Pro ROM Development

Since I have installed WM 6 on my Universal, it is rebooting occasionally and without a logic behind it...
Who else has the same problem?

Which rom You are using?

RealVGA ROM... but it is also happening with the laurentius rom...

Dumdidum said:
RealVGA ROM... but it is also happening with the laurentius rom...
Click to expand...
Click to collapse
try to change another rom that help your phone avoids mistake.

Related

nncuong's WM6 ROM is the best ever!

I'm no kidding.. I've tried all ROMS available in this forum and finally got this one (nncuong's) that works blazingly fast plus an ~21MB flash disk! Try and see the difference!
Hmmm... nncuong's is good but I feel it's a little TOO clean. I still prefer Beasty's and Laurentius's
kerazul said:
Hmmm... nncuong's is good but I feel it's a little TOO clean. I still prefer Beasty's and Laurentius's
Click to expand...
Click to collapse
Fully agree on that
Cheers
I agree That this is the most stable, has the max RAM and is as fast as anyones out there.
I totally dislike the Leo/Beast Rom because of the low RAM and needless apps.
Jwrights new 0.5 ROM is the only 0.5 ROM todate that hangs at reset.
arifqur said:
Jwrights new 0.5 ROM is the only 0.5 ROM todate that hangs at reset.
Click to expand...
Click to collapse
What do you mean with 0.5 ROM is the only 0.5 ROM? Beast&Leo's latest ROM has an older built and is AKU 0.7. Isn't that right?
Of course there isn't a perfect ROM that suites everyone. We all have different need and tastes.
I'm also tried all Roms, and now I'm using JW's latest ROM. Much more satisfied.
It still have some little bugs (are being solved almost live) and doesn't have videocall but it works (VC Out) with maniware's .cab.
hrb said:
Fully agree on that
Cheers
Click to expand...
Click to collapse
Me toooooooooooooooooooooooooooooo
Jwrights all the way for stability
arifqur said:
I agree That this is the most stable, has the max RAM and is as fast as anyones out there.
I totally dislike the Leo/Beast Rom because of the low RAM and needless apps.
Jwrights new 0.5 ROM is the only 0.5 ROM todate that hangs at reset.
Click to expand...
Click to collapse
For me, the most stable roms were Jwright's roms and his last one, the 0.7 not 0.5, is the most stable. His previous version, 0.3 if I'm not mistaken, had lock up problems but are solved in his last release.
Leo/Beast roms are good but not as stable as Jwright's roms.
Cheers
i've tried other wm6 roms, leo and beast is also good but jwrights latest rom is the best for me right now. stable and fast for me.
nncuong's WM6 ROM all the way!!!!!!
i tried several WM6 roms i was even thinking about going back to WM5 since there is a rom where you can get up to 30 mb free of RAM but after i tried nncuong's WM6 ROM im more than happy plus it has flashlite already installed so i can try the byka touchflo-like cube (now working with the universal)
i would say try several ROMs until you find the one that suits your needs (i found the one i was looking for and that is nncuong's WM6 ROM)
thanks nncuong. great job, i know it will have bugs and whatnot but the speed i get with my universal its finally up to what i was expecting when i got the uni thinking it had 520mhz.
link dont work
hey the link to download the om is not working man ! plz help ! or give the link from where i can download this rom ! thanx
z0d1ak said:
hey the link to download the om is not working man ! plz help ! or give the link from where i can download this rom ! thanx
Click to expand...
Click to collapse
Hi z0d1ak,
I confirm that the links are working and they are posted on this page:
http://forum.xda-developers.com/showthread.php?t=333998
If you Universal is G3, than I will definitely suggest to download the ROM for G3 devices only. It gives you an extra Flash Disk with 21.75MB storage.
The total storage after flashing the ROM is:
Main storage: 40.90MB
Flask Disk: 21.75 MB
Ext_ROM: 9.6 MB
KOR!
It's a beautiful ROM, but i have a problem with the bluetooth part of it ... if I try to connect to wireless headset, it connects, but after 1 min the device freezes, the same happens if I try to send to somebody a file, for ex. today I tried to send a small jpg file of 45,9k and the device freezed at different time (45%, 75% etc.) but I couldn't send the file.
Solution?
Thx!
I Agree
RavenMaster said:
Jwrights all the way for stability
Click to expand...
Click to collapse
I Have tried many, and each has its advantages and disadvantages. Although nncuong's is superfast, Jwrights is super stable, and only losing a little speed for that. So atthe moment with functionality and speed Jwright wins IMHO.
Antic said:
For me, the most stable roms were Jwright's roms and his last one, the 0.7 not 0.5, is the most stable. His previous version, 0.3 if I'm not mistaken, had lock up problems but are solved in his last release.
Leo/Beast roms are good but not as stable as Jwright's roms.
Cheers
Click to expand...
Click to collapse
JW's last WM6 ROM (2.12) is one of the worst performer ROM ever installed in my uni. Initial RAM available to use only 24MB.. I used to advocate JW's 2.0.2 but since I got my hand on nncuong's and flashed it.. Since then I'm still a happy user of his ROM... kudos to nncuong for his good work!
A Question
uh...can the WiFi connect to a router with WPA TSK security enabled in this ROM?
eddy7496 said:
uh...can the WiFi connect to a router with WPA TSK security enabled in this ROM?
Click to expand...
Click to collapse
Hmm.. haven't tried WIFI with WPA TSK enabled but judging from a posting here http://forum.xda-developers.com/showthread.php?t=333998&page=8.. seems it still has a bug. I saw a WIFI fix available from one of the thread... perhaps you should try it out!..
Here's the thread:
http://forum.xda-developers.com/showthread.php?t=330481&page=3
You can download fix (WiFiService.cab) from following link:
ftp://xda:[email protected]/Uploads/Universal/WM6/mamiware/

Problem with Dutty's WM6.1

i just flashed Dutty's wm6.1 beta, now my phone doesnt want to load past the Dutty's HTC splash screen, any ideas? Did i do something wrong maybe?
thedrizzle said:
i just flashed Dutty's wm6.1 beta, now my phone doesnt want to load past the Dutty's HTC splash screen, any ideas? Did i do something wrong maybe?
Click to expand...
Click to collapse
u have to have a wm6.1 radio. click my link below. radios folder
im using 1.64.04.06 or something like that. i change constantly.
Flash a new radio and it should boot up...
Im pretty sure this one is recommended for that rom:
http://xda.scan4.us/Radios/KAIS_Radio_Only_1.27.12.32_CustomRUU.zip
McMevan said:
Flash a new radio and it should boot up...
Im pretty sure this one is recommended for that rom:
http://xda.scan4.us/Radios/KAIS_Radio_Only_1.27.12.32_CustomRUU.zip
Click to expand...
Click to collapse
thats a 6.0 radio not a 6.1
P1Tater said:
thats a 6.0 radio not a 6.1
Click to expand...
Click to collapse
Tater,
Dutty's 6.1 BETA still requires the older radio.
thanks guys, i'll try out some different radioz...

Problem with smarttoolkit (i guess) in S710

Problem 1: After i close smarttoolkit, no icoms display in start.
Problem 2: Ringtones and sms tones etc. run faster than normal speed.
i have tried 2-3 roms but the problem still remains. I dont use any overclocking s/w.
im using the RC9 version of smarttoolkit. Got Any solutions???
romil7 said:
im using the RC9 version of smarttoolkit. Got Any solutions???
Click to expand...
Click to collapse
Thy the RC8 version, that one is the only one that works on my phone (S710 WM6.1)

Kaiser makes hard reset after turning off! Help

Hi
i had pdacorner ultimate-x v4 without major problems.
then i wanted to install v7. After installing mobile shell the first time, s2u2 the second time and thumbcal the third time, the phone stuck and after soft-reset, it made a hard reset!!
the same with v8 and (!) ultimate-x2 v4 (wm 6.5)
i also updated hard spl to 3.34 and radio to 1.71 version...
What am I doing wrong???
Go HTC.com, click on support, download the latest official ROM for you phone, flash it, then flash to whatever ROM you want to from xda. Why this makes a difference, I don't know. Flash official ROM first, then flash whatever you like. Will fix it.
well, i have a mda vario 3, so i cannot download it from htc...
can i also take the update from t-mobile?
http://www.t-mobile.de/fremdcontent/1,2790,123254,00.html
it's wm6.1
thanks a lot! hope it helps!
I would think any official ROM would work, but I don't know, to be honest. Try it out. If it flashes, then just re-flash whatever ROM you want from here. (BTW, I really do recommend TPC's 5.1 He does incredible work!)
SoberGuy said:
I would think any official ROM would work, but I don't know, to be honest. Try it out. If it flashes, then just re-flash whatever ROM you want from here. (BTW, I really do recommend TPC's 5.1 He does incredible work!)
Click to expand...
Click to collapse
just flashed t-mobile rom, it's so ugly
hope it helped!
yeah, tpc's is also nice, but for me pdacorner ultimate's fit best!
Really hope it helped, configuring again and again is annoying...
till now, everything works fine, installed everything i need - hope it keeps like that!
odin568 said:
till now, everything works fine, installed everything i need - hope it keeps like that!
Click to expand...
Click to collapse
your kaiser's on my prayed ...

manilla 2.5 htc topaz

hi. I have a htc topaz (touch diamond 2) with official rom 6.5 WWE. so can i install manilla 2.5 on my rom??? and if yes , can you please give me the link for manilla 2.5 for htc topaz wvga?
thank you
Yes it can be done.
Just read the FAQ in the rom-section of the topaz...
Just pick the rom you want from the rom-section.
i think what vijaysapkota asked is for a .cab that will do that inside his rom, not other rom. as far as i know, it cannot be done. the only way is to flash a manilla 2.5 rom.
You have to installe a new 6.5 Rom with Sense (manilla) 2.5, and they only comes as Unofficial Rom.
It's not possible to only installe Sense 2.5 on a Rom.
All the above is right but beware, 2.5 is quite slow on topaz
mastawindu said:
All the above is right but beware, 2.5 is quite slow on topaz
Click to expand...
Click to collapse
Not on my Topaz....
Bruce Inman said:
Not on my Topaz....
Click to expand...
Click to collapse
What he means is:
2.5 is slower than 2.1, on Topaz. Claiming otherwise is plain rubbish.
Michiel0211 said:
What he means is:
2.5 is slower than 2.1, on Topaz. Claiming otherwise is plain rubbish.
Click to expand...
Click to collapse
Hmmmm, the only thing slow on my phone is messaging.
..and there's a fix for that....
Is there any much easier way for new comer to flash the unofficial ROM??
haroharo said:
Is there any much easier way for new comer to flash the unofficial ROM??
Click to expand...
Click to collapse
its very easy... mostly follow instructions & search xda if solution needed...
first install hardspl > just follow onscreen instructions
then download rom and flash from sd card method it means you just rename the file & reset the phone in special way.
Michiel0211 said:
What he means is:
2.5 is slower than 2.1, on Topaz. Claiming otherwise is plain rubbish.
Click to expand...
Click to collapse
Well on my Topaz Sense 2.5 isn't slower. I use this ROM http://forum.xda-developers.com/showthread.php?t=579076&highlight=download
Michiel0211 said:
2.5 is slower than 2.1, on Topaz. Claiming otherwise is plain rubbish.
Click to expand...
Click to collapse
Not according to latest benchmarking results (cannot post link, sure you can find them). Same ROM TESS, one with 2.5 is faster than with 2.1. Haven't tested TESS pride III, but TESS Leo II sure feels fast, faster than other Sense 2.1 ROMs.
jkolner said:
Well on my Topaz Sense 2.5 isn't slower. I use this ROM http://forum.xda-developers.com/showthread.php?t=579076&highlight=download
Click to expand...
Click to collapse
crisagatie said:
Not according to latest benchmarking results (cannot post link, sure you can find them). Same ROM TESS, one with 2.5 is faster than with 2.1. Haven't tested TESS pride III, but TESS Leo II sure feels fast, faster than other Sense 2.1 ROMs.
Click to expand...
Click to collapse
My mistake. I haven't tried the roms you mentioned. What I'm sure of is that 2.5 is beautiful
Bruce Inman said:
Hmmmm, the only thing slow on my phone is messaging.
..and there's a fix for that....
Click to expand...
Click to collapse
What fix never heard of this can you give me the link for that fix ?
it may not be necessary, depends on ROM (the fix might be already included). just play a while with your new rom and you'll notice. if needed, then you should search the forum (the thread started by the author of your ROM is a good place to start).
manila 2.5 in topaz
Bruce Inman said:
Hmmmm, the only thing slow on my phone is messaging.
..and there's a fix for that....
Click to expand...
Click to collapse
I´m using the Duty Roms R6 and the manila 2.5 works quickly and very stable. Probably use more battery but the roms is excellent here the link. And the roms is in several language.
http://forum.xda-developers.com/showthread.php?t=579076
Regards and good lucks.
that's exactly the rom Bruce Inman is having ). maybe he is more demanding.
mastawindu said:
My mistake. I haven't tried the roms you mentioned. What I'm sure of is that 2.5 is beautiful
What fix never heard of this can you give me the link for that fix ?
Click to expand...
Click to collapse
Here's the link.
2,5 on the Topaz is so damn slow compared to my htc hd2..incredible.
Have to flash with another rom, atm is unusable.
MaxDNet said:
2,5 on the Topaz is so damn slow compared to my htc hd2..incredible.
Have to flash with another rom, atm is unusable.
Click to expand...
Click to collapse
Not much of a comparison
Bruce Inman said:
Not much of a comparison
Click to expand...
Click to collapse
i bought this device for my gf, i'm owning an hd2.
This Topazzos has the LP EVO X ITA rom but guys..it's really slow, or i'm used too much with my hd2 but there is no story at all (i know the processor speed is different but...but..)
Mybe is better to restore the original rom or do u know any valuable manila 2,5 rom?
Thanks.

Categories

Resources