Key Backlighting Questions... - HTC Tornado

Is there a way to make the key backlighting stay on longer? I changed the screen backlighting to stay on for more than 15 seconds but now I find the screen is on when the key backlight is not, which is a real pain and can't help much with battery life.
If my phone is locked and I press a key the screen comes on to prompt me to unlock it but the keys are not backlit so it is difficult to do in the dark. Is there a way to change this.
Is this normal behavior? I have one of the recent cooked ROM builds.

Try turning off Light Sensor Enable under Power Management.

Related

3 seconds blackligh on/off function is gone

Hi there...
To reserve more battery power, I usually shut off the backlight during noon and turn it back on night by just push the power button couples of seconds. I found it very helpfull
Currently I've upgrade my Himalaya to WM 2005. It works fine, but not the backlight control over power button. Is there any way to make that lovely function on again? Or is there any software can control the backlight behavior to be assigned to one of the hardware buttons.
Thank you for your help.

How to disable volume buttons in locked mode?

When my HTC pro is locked the both volume buttons still work.
Is there a way to disable these 2 buttons when my phone is locked, the should only work if the HTC pro is not locked!
How can I change this?
good question. I would like to know as well...
a friend of mine told me, htat the diamond has got the buttons locked in locked mode, too.
2 of my working partners have both a touch diamond and they both confirmed that the button keys are turned off when the phone is locked.
you guys should check out the sensor lock app, it's free and by a peep on here, it's pretty good
this app is quite cool (sensorlock), but we just want a simple lock of the volume buttons when the device is locked by the default procedure.
sensorlock does not what i want.
I just want the default lock in wm to lock the volume keys.
So if I press the "end call" and hold it down the phone locks, it should also lock the volume keys, the on/off button should NOT be locked!
More function I do not need for locking.
It would be OK if a app does the same with a software/sensor lock function, but important is that it is enabled by long press of end call button.
Sorry no answer to your question but I agree: the fact that the volume buttons are not locked is really annoying!
volume buttons not locked
They are locked on my original Dutch T-Mobile Rom.
(and yes, I've checked that)
On my vodafone rom not, I am now runnin romeos and on this rom there are also not locked.
Note: we are speaking here about the default lock of the OS, NOT the sensorlock! So holding down the "end all button" for approx 2 seconds. The phone now locks itself and display is dimped, now all keys execpt the on/off and volume keys are locked. What I want is that volume keys are also locked.
It is possible to lock the volume keys using apps such as sensorlock, but this lock does not work with the end call button, you must rotate the phone of use the stylus to (un)lock it.
tis true. when locked, volume buttons work. when display is off, they do not
3 Australia Rom also comes with this problem. It would be interesting to know how they fixed it in the T Mobile Dutch rom.
install this: http://forum.xda-developers.com/showthread.php?t=412418
works great!
I use this programm :
AnswerkeyDisabler
Before i tried S2U2.
ppa.peter said:
install this: http://forum.xda-developers.com/showthread.php?t=412418
works great!
Click to expand...
Click to collapse
Not really, it does not what I ask
I just want: lock using hold own end key, all keys (including volume) are OFF.
This tool does not do this, if I set is using wm in lock modus the volume keys still work, all other options are not for me...
It is great that people suggest which tools to use for locking but please only suggest a tool which locks does exactly as I ask.
If anyone Finds an answer to this I would love to know as well!
yeah kinda of a big problem. I lock the phone. Put it on vibrate or silent and put it in my pocket. because of the location of the keys, it sometimes increases the volume. Quite annoying since use an mp3player where i go, i don't hear my phone (thats why i prefer to use only vibrate).
Turning the display off is a workaround that helps a bit.. but that button also works when locked (not weird ofcourse)
Nevermind, I've found the best way to get past this is after locking the phone (by holding the end call key) if you press the power key and release it puts it into "Sleep Mode" and turns off the screen. After this the volume keys cannot be used unless you press and release the power button to wake it up.
Seems to cure my problem.
any person can help me how enable volume buttons when device is locked ?
rom: ROMeOS ver.1.70.3

[REQ] Lock screen before going into standby

i dunno if any of you notice this. when you press the right most button, with the red end call key, the phone goes into standby, but did not go into lockscreen. when you press any button, the screen lights up in home screen and the next second the lock screen kicks in.
i am wondering is it possible to tweak and make it such that when u press the button, the screen will go into lockscreen first before the screen blackout. i guess we can't have the screen blackout and going into lockscreen together since going into standby, app wouldn't run either.
Just that i prefer to lockscreen first rather than when i wake it up, it goes into lockscreen and i have to unlock it.
That will depend on the ROM. At least on the HD2 this will happen if you disable automatic backlight. Did you do that?
Hit start and then hit lock on the bottom left.

EVO hack for people with physical disabilities

I have a disability so I have weak hands and limited finger dexterity. I am not able to hit the tiny hardware power button and volume button on the HTC EVO. It also seems most new 1ghz android devices have the same setup for waking the screen by power button only, so for many with disabilities like me, it will be a problem for most of the new capacitive screen phones.
Is there a way to modify the OS to wake the screen from touching the screen or the capacitive buttons?
Or a way to dim the screen 90% and go to lockscreen, to save on battery life?
Even better would be a voice wakeup home screen feature with a magic word like "Android" or "Droid".
I know turning on the screen by touching it or the capacitive home row buttons is not practical for everyone who puts their phone in their pocket, but many of us in power wheelchairs mount it to our chair so it is never in a pocket.
My wheelchair has 2 GRP-22 12V batteries, so I could get power for all day very easily. I know the screen can burn out at some point, but I usually upgrade every year or sooner anyway. Id just rather not have the screen lit all day.
I have at least 50 friends around the country with the same physical issues (MD) and there are thousands more, so this is a huge need for future smartphone users with disabilities.
I'd appreciate any input and if any of you programmers out there want a new challenge, I am glad to help test it!
Thanks!
Cyanogenmod roms have a setting for using the menu button to unlock the phone. You have to root your phone to install it.
Edit: strike that, it's late and wasn't thinking. It only bypasses the unlock screen. There is an app called no lock that will let you use the camera and volume buttons if that would be easier to unlock.
Sent from my Droid using XDA App
Yep, NoLock from the market can awake the phone with the volume buttons.
Yeah the volume buttons are not any easier.
I may be able to use the power button if I could flip the phone screen orientation around so the power button is at the bottom.
From what I understand, the capacitive home buttons are part of the screen so if the screen is off, the buttons off. So what I am envisioning is setting the phone to timeout to lockscreen and dim down 90-95% so the screen is dark, yet the capacitive home button will work. Any programmers think that is possible?

locking & unlocking sceen without pressing power button

hi
i had a question re locking and unlocking the screen. At the moment i press power button to lock the screen. then to unlock i press power button to wake up the screen and then move the onscreen ring to unlock the phone.
My previous phone was xperia arc s and had three hard buttons on the bottom which i would press to wake up the screen. I quite miss that, especially for unlocking the phone.
any alternatives other than to always keep the screen awake!
ta
"Screen off and lock" for turning it off. Works very good.
For turning it on I've seen a few apps that use the proximity sensor (i.e. put the phone with the screen against the table and it switches off, pick it up and it switches on). Not a great battery drain, but I don't know if leaving the proximity sensor always on could damage it...
Some ROMs have a setting for waking the screen with the volume rocker, and there are also a couple of kernels that have "sweep to wake". Thats where you sweep your finger across the soft keys at the bottom of the phone, from one side to the other. Other than those two thing thats about it for alternative ways to wake the screen.

Categories

Resources