Hi,
Not sure if this is the right place so mods please move or lock if inappropriate.
I have a one week old Brodit HTC Desire Active holder for sale on eBAY. I've changed the phone so no longer need it.
Stuck it on a buyitnow for £25. Purchased from mobilefun.co.uk for £35.
Thought someone might be interested in picking one up cheaper than elsewhere - it's as good as new (just don't have the fixing leaflet anymore)
http://cgi.ebay.co.uk/ws/eBayISAPI....27720&ssPageName=STRK:MESELX:IT#ht_500wt_1156
"This listing () has been removed, or this item is not available."
Thanks for the feedback. Think something weird happened to the formatting of the url. I've edited the original post. Should work ok now.
cheers fella
now to get my proclip, just bought and paid topic can be locked now.
i presume its in good condition with it only being a week old
cheers again
Hi,
Thanks. Just replied to you through eBay.
Yes it's in as good as new condition. The only thing missing is the plastic bag it came in and the little leaflet which basically says "Screw these four screws in!"
Phone as only been in in two or three times. Just enough to loosen it up a tiny bit
Oh and I should point out that it can supply enough juice to charge properly whilst using as a Sat Nav with bluetooth turned on.
Enjoy..
just to say i got it and my review so far is as follows
beautiful fit
i have an invisible all over cover on, the phone fits with a little shove, but leaves the sim card cover behind when removing it
if it doesn't ease off with time and use i will file a smidge off
but overall im happy and it will fit with an invisible shield on
Does this car kit set 'Car Mode' when you insert the phone? I know the official adapter does.
No, the brodit holder does not trigger the car panel. Also, I think it is pretty tight on the phone. My sim cover slips down when I remove the phone from the holder, and it was driving me nuts until I sandpapered the sides.
Had one in the past for my HD2 and bought it another for the desire hd.
I personally RECOMMEND using the passive holder and buy a separate car charger. It worths because it's more handy for acessories and other cell phones. I had both, the active and the passive, and I find the passive more versatile.
the tight fit i had at the start is getting better, even with my zshield
the power plug needs guiding in sometimes, especially when i plug in my aux socket, i am going to look into a way of fixing the aux jack so it clips in when pushed down
Hi,
I searched a long time for a good car holder. Now I bought the brodit active holder and want to give you some feedback on it.
Positive:
- Build quality is very good. The plastic doesn't look cheap but very good.
- Despue the fact that the brodit holders are not glued or drilled to the dashboard, it's very very stable.
- The holder is active, that means if you push it in into the holder it gets energy
- The cable to the cigarette plug and the plug itself is looking good as well. A little light on the plug is showing that energy is.
- The car specific part can be fixed without drilling. So in a leasing car you can remove it after some years again.
- Inserting and removing the phone is easy. It's not to tight and not to loose, just perfect.
Interesting to know:
- I read that the brodit car holders a consisting of two parts, the car specific part and the device specific part and therefore you can switch the holder between the cars. That doesn't work as I expected because the device specific part and the car specific part are connected with a screw. So you can't easily take it to car A today and car b tommorow.
- The same applies to the orientation of the phone. Landscape is possible. But you have to open the screw with a scredriver. Adjust the holder as you like it and thight the screw again. You won't change it from day to day or even during the drive.
Edit 01/31/2011: Both is probably possible if you have the right extra parts from Brodit. Thanks for your feedback guys.
Negativ:
- There is a "open area" for the headspeaker plug in the holder frame. But this one has to little tolerance (or HTC changed the dimensions of the phone). I couldn't insert the plug. It's not important for me as I have a bluetooth connection to my auto radio.
Summary:
I would buy it again. It's a bit expensive (ca. 75 EUR for both parts of the holder) but worth the money as I haven't find something comparable.
Any chance of some pictures to see it in action? im after a car holder aswell
Good one
Brodit are the best car holders in my opinion i use them for years now and in different cars never had any problems whit them it wont fell of the fit is perfect if you get the right part to place it in your car they made for every car its own part so look out you get the right part for you brand and type of car
Regards Wielo
Yu cannot movt from car to car because you have to fasten the holder to the clip with screws. But you can buy 1 clip for each car and buy the removable adaptors (I don't remember how they call them, something like clip & move) so that you can easily transfer to different cars.
Orientation: not true, you can just rotate and move at any angle you like.
Charger: bad thing is that it is not recognized as dock which would be very nice to have.
Also, I received one which was very tight for the phone, so tight that I couldn't take the phone out of it and most times, the sim cover would get off and stay in the cradle. I received a replacement which seems to have been altered to allow more room for the phone. If you have similar case, you should request replacement from brodit directly since resellers deny the issue.
Some picture would be really helpful!
I am looking to go Brodit's way - I particularly like the option of the molex connector for getting direct power from the power, thus hiding cables! The price though is kind of heavy...
Regarding the picture, you can see it pretty good on that site. Go with the mouse over the small pictures:
http://www.gps-haus.de/Zubehoer-n-H...nzuenderkabel-fuer-HTC-Desire-HD::104540.html
Regarding the "moving it from one car to another". You are right. There are some extra parts that can be bought.
Regarding the orientation, you may be right as well. I didn't know that there is that much extra parts you can buy. There is probably one that allows it. With my solution it's not possible. At the moment I am a bit overwhelmed how many extra parts there are. It's difficult to know which one is good for what.
andreasy said:
Charger: bad thing is that it is not recognized as dock which would be very nice to have.
Click to expand...
Click to collapse
That's not a big problem for me. I use tasker in order to configure/control the phone. If the bluetooth connection to my radio is connected, I have a trigger to do whatever I want.
I bought a couple of these from ebay http://www.ebay.co.uk/itm/151247910444?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The USB plug end is huge, and the magnet is very weak. It's OK if you leave it flat on the desk, but picking the phone up means it's more than likely going to fall off.
I'd be wary of this kind if you're thinking of getting one.
I'd like one with a very strong magnet so that I can plug it into a USB battery pack and leave it in my pocket without wondering whether the magnet connector has fallen off.
Any suggestions?
I also bought such a cable. Mine is actually pretty good so far. Magnet power is good enough and the overall cable is just as good as a standard Sony cable. And only 3 euros incl. shipping.
Sent from my D5503 using XDA Free mobile app
AlanJC said:
I bought a couple of these from ebay http://www.ebay.co.uk/itm/151247910444?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The USB plug end is huge, and the magnet is very weak. It's OK if you leave it flat on the desk, but picking the phone up means it's more than likely going to fall off.
I'd be wary of this kind if you're thinking of getting one.
I'd like one with a very strong magnet so that I can plug it into a USB battery pack and leave it in my pocket without wondering whether the magnet connector has fallen off.
Any suggestions?
Click to expand...
Click to collapse
I don't think you will have any luck finding one like that, as the connector was never designed to be used as a stand alone cable, it was always meant to be inside a charging stand/dock. Even if the magnet is very strong when pulling straight out from the connector (like being able to lift the phone with it) it will still come off super easy if pulled at an angle.
Maybe you could buy a cheap dock, then cut some in it so that all that is left will be like a clamp that goes around the edge of the phone and holds the cable steady? Or maybe some cheap case where you can glue tha connector to the case and only use it when charging?
Are they no official magnetic charger available? Isn't anyone here using?
Sent from my D5503 using XDA Free mobile app
Phukkitt said:
I don't think you will have any luck finding one like that, as the connector was never designed to be used as a stand alone cable, it was always meant to be inside a charging stand/dock. Even if the magnet is very strong when pulling straight out from the connector (like being able to lift the phone with it) it will still come off super easy if pulled at an angle.
Maybe you could buy a cheap dock, then cut some in it so that all that is left will be like a clamp that goes around the edge of the phone and holds the cable steady? Or maybe some cheap case where you can glue tha connector to the case and only use it when charging?
Click to expand...
Click to collapse
I That's given me an idea, perhaps these cables with some Sugru so that it aligns to the edge of the handset might do the trick!
Yup, I complained about the weakness of the magnet and got my money back from the eBay seller
pathaniya said:
Are they no official magnetic charger available? Isn't anyone here using?
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
The only official magnetic charger is the DK32 charging dock. The cables that most people buy are the same cables that is inside the dock, but it's impossible to know whether they are original parts or just copies since Sony doesn't officially sell that cable as a separate unit. The ones that sellers claim to be originals could very well only be meant as replacement parts or a simple way for phone repair shops to charge the phones.
The magnet is weak and actually takes some effort to get it to align, I was hoping that it would suck itself in like a MagSafe connector does. It also charges at about 70% the speed of the original USB charging cable even when connected to the same ipad wallwart.
I'm unimpressed with my knock-off cable but for the price, I can accept the mediocre quality.
zxqw said:
The magnet is weak and actually takes some effort to get it to align, I was hoping that it would suck itself in like a MagSafe connector does. It also charges at about 70% the speed of the original USB charging cable even when connected to the same ipad wallwart.
I'm unimpressed with my knock-off cable but for the price, I can accept the mediocre quality.
Click to expand...
Click to collapse
Well I paid 15 for mine (bought from a retailer) and they don't do refunds.
Lesson learnt...
What do you expect from such a small magnet? Imo it's quite strong already. I got this cable, which doesn't have a stronger magnet but aligns better, and it's cheap - I'm from Germany though: http://www.ebay.de/itm/-/291037184668
I also have the one the op has, with that one the phone started charging but it was so slow that it never finished. Modifiying the plastic and pins didn't help.
Not sure if it fits here, as my cable was not bought through ebay...
I got the OEM Magnetic Charging USB Cable for Sony Xperia Smartphone Black with Sony logo on the magnetic plug and it doesn't look too good: cheap to the looks and touch. The cable is thinner and feels flimsy compared to the USB charging cable that came stock with the phone. The magnet holds so-so but won't do too well when grabbing the phone, answering a call or whatever. The USB plug is huge, feels and looks cheap as well and can't be fully inserted into the charger; a bit of the metal part will stick out, that is.
I didn't do a full charge so far, so, can't commend on that part. I didn't measure the time but from what it felt like, the magnetic cable charges pretty fast - I'd say about the same rate as the stock micro USB cable (both with stock wall socket charger). But pay attention if you move the phone; the magnetic plug comes off really easy and might cause some bad surprise the next morning (the moment you wake up and notice your phone died on you and didn't wake you up ... about 2 hours ago, which was about an hour before you should've left to go to work and so on).
Now, if I'm not mistaken, witrigs says somewhere on their site that there would be huge difference between the Original OEM :angel: cable and the cheaper 3rd party ones the also offer. Honestly, I can't imagine the really cheap ones are much worse (as far as look & feel and usability goes).
I bought two of the following a few weeks back (for work and home) and overall am quite happy. The magnet is reasonably strong - I can lift the phone to check an email etc without it falling off - not sure about a phone call with it attached though...
cant post link - got it from dx-box website item SKU-8894
I have just ordered a 3rd cable for the car - after buying a case which has a cutout for the magnetic port but NOT for the microusb port:
harryw66 said:
I have just ordered a 3rd cable for the car - after buying a case which has a cutout for the magnetic port but NOT for the microusb port:
Click to expand...
Click to collapse
What case might that be? I am looking for a case with almost no cut-outs myself (camera/flash, magnetic charging port, headphone jack).
Wurstwarenfachverkäuferin said:
What case might that be? I am looking for a case with almost no cut-outs myself (camera/flash, magnetic charging port, headphone jack).
Click to expand...
Click to collapse
I got the Zukin Mini Ultra Thin Aluminium Bumper
I cant post links so you will just have to google it - sorry.
It has cutouts for the Magentic port, the Sim card, the camera and the power + volume buttons, headphones and bottom speaker - but NOT the SD card nor the usb port...
I bought a few of this original Sony magnetic charger cables for my Z1c the last months.
http://dx-box.com/brand-new-magnetic-usb-charging-cable-adapter-for-sony-xperia-z1-compact.html
It fits perfect and there are no problems while charging.
Regards, Chris
Sent from my Xperia Tablet Z (SGP321) using XDA Premium HD app.
harryw66 said:
I bought two of the following a few weeks back (for work and home) and overall am quite happy. The magnet is reasonably strong - I can lift the phone to check an email etc without it falling off - not sure about a phone call with it attached though...
cant post link - got it from dx-box website item SKU-8894
Click to expand...
Click to collapse
dhchris said:
I bought a few of this original Sony magnetic charger cables for my Z1c the last months.
http://dx-box.com/brand-new-magnetic-usb-charging-cable-adapter-for-sony-xperia-z1-compact.html
It fits perfect and there are no problems while charging.
Click to expand...
Click to collapse
Looks like you both ordered from the same site.Can you both attest to the magnet's ability to stick to the phone?
Xaeons said:
Looks like you both ordered from the same site.Can you both attest to the magnet's ability to stick to the phone?
Click to expand...
Click to collapse
The magnetic ability is okay, not very strong but if you let the phone on your desk, it´s no problem.
I don´t know if a stronger magnet can damage the phone.
I placed a cable of this in my car-holder and fixed it with a little point of glue and there´s no problem with vibrations while driving.
And also good at this cable:
You can not reverse polarities!
I hope i could help you.
Regards, Chris
dhchris said:
The magnetic ability is okay, not very strong but if you let the phone on your desk, it´s no problem.
I don´t know if a stronger magnet can damage the phone.
I placed a cable of this in my car-holder and fixed it with a little point of glue and there´s no problem with vibrations while driving.
And also good at this cable:
You can not reverse polarities!
I hope i could help you.s
Click to expand...
Click to collapse
I see, thanks!
On another note:
Hasn't anyone bought from Witrigs or is the shipping too far?
EDIT: Ok, witrigs' estimated shipping time is ridiculously long (for someone like me in south east asia) dx-box is better
Xaeons said:
I see, thanks!
On another note:
Hasn't anyone bought from Witrigs or is the shipping too far?
EDIT: Ok, witrigs' estimated shipping time is ridiculously long (for someone like me in south east asia) dx-box is better
Click to expand...
Click to collapse
I did. But I am in Europe, so, it doesn't say anything about shipping within Asia.
However, for my order, delivery took about 2 weeks, which is pretty fast compared to most of my previous orders from China (usually 3 to 4 weeks without the customs interfering).
Wurstwarenfachverkäuferin said:
I did. But I am in Europe, so, it doesn't say anything about shipping within Asia.
However, for my order, delivery took about 2 weeks, which is pretty fast compared to most of my previous orders from China (usually 3 to 4 weeks without the customs interfering).
Click to expand...
Click to collapse
I may order a magnetic charging cable from witrigs along with a glass back replacement part so I'd get more out of the shipping fee and shipping time.
There are options for shipping via different countries with different shipping costs (at the bottom upon checkout)
For every phone I owned in the past, I had an active cradle in mijn car. This allows me to charge while driving, and it is very useful for displaying heavy traffic and mobile police speed checks.
For the Moto X Play, no luck. Brodit did not seem to have a holder, neither they are keen on starting producing one. I asked politely by sending an e-mail, only to receive a "thank you" and an advise to keep checking their site because they might pick on the idea. No such luck.
This week I ordered the active holder for the Moto X Style : http://www.brodit.com/product.html?id=513787. Just because I was fed up waiting and fed up not being able to have traffic info at hand ni my car. The Style has the same form factor as the play, but it is 1.2 mm wider. The connector seemed to be in an adequate spot, but the Style is thicker so picture-guessing it is the best I could do.
Well, the unit arrived today. I solved the 1.2 mm difference with black insulating tape. This can be obtained from your local hardware store. 2 layers on both sides hold my Moto X Play nicely. Also, the connector is spot on! I tried charging using a 12V adapter and it worked!
So, if you want a car holder for your Play, buy one from Brodit and stick a few layers of tape onto it.
I also use to get a brodit cradle for my smartphones and , personnaly , for the MXP , I got the reference 511230 which you can adjust and i stuck a small block on the cradle for the phone not to move . I 'm happy with that and can use the cigar power supply with it.
I guess I was to impatient...
I had a Brodit holder in my car for my Navigon PND. Since that broke down (just 4 years old) I am using my Moto X Play for navigation. I had a sheet of 1 mm thick aluminium lying around, and two Neodymium magnets (from the packaging of my previous pone, HTC Touch HD ). I used that, and a cable with a 90 degree angled micro-USB connector to create a holder for my Moto X Play. The holder is coated with Motip Dupli Sprayplast (matte black)..
A thin piece of metal cut out of a can, inserted between the battery and the back cover, makes the phone stick to the magnets. Bumpy roads are no problem.