Database Info

[RIOKD_KERNEL_V2][DEV] LG P690 (Optimus Net / Optimus Link)

NEW**** V2 KERNEL USB TETHERING WORKING )))
I have compiled this kernel for LG P690 (Optimus Net / Optimus Link) starting from LG Sources
MAKE SURE NOT TO CLEAR ANY CACHE IN CWM OR ROMMANAGER WHILE FLASHING.
FEATURES:
- overclock (up to 1GHz+) + AHB
- ext3/ext4 support (embedded)
- TUN support (embedded)
- VARIOUS governors
- Wake Lock Fix
- CM7 Compatible
- BFQ IO Scheduler (enabled on default)
- Various fixes and patches
- IMPROVED GPU PERFORMANCE
TEXT ALL THE GOVERNORS AND REPORT YOUR VIEWS ABOUT BEST ONE.
Instructions :
- install zip using Recovery (AnyKernel updater)
ATTENZIONE ALL'OVERCLOCK OLTRE I 940 MHz! FREQUENZE TROPPO ALTE POSSONO DANNEGGIARE IL VOSTRO TELEFONO!
KEEP CARE WITH OVERCLOCK ABOVE 921 MHz! TOO HIGH FREQUENCIES COULD DAMAGE YOUR PHONE!
Disclaimer:
Neither I nor XDA consider ourselves responsible for any damage caused to the telephone,
install this recovery at your own risk.
ANTUTU SCORE 2600 WOW! OMG!
SOURCES:- https://github.com/jstotero/Cucciolone-Rewrite
Note Some Battery tweaks and governors by kd are not included right now soon jst will add it in source.

waiting
---------- Post added at 04:09 PM ---------- Previous post was at 03:18 PM ----------
Can I install CYANOGEN 7.2.1 BY KD(C) first, then this?

ruelmercado said:
waiting
---------- Post added at 04:09 PM ---------- Previous post was at 03:18 PM ----------
Can I install CYANOGEN 7.2.1 BY KD(C) first, then this?
Click to expand...
Click to collapse
Check out and tell whether it works with stock rom or not 90% chances are it will work.If doesn't i will give you v10e kernel to make your devices running again.
Flash it Now

Hi
Thanks for not letting us abandonati great job once I try it I know I should hope so

Ok so what's better then ? the CM7.2 http://forum.xda-developers.com/showthread.php?t=1483204 or this rom ?

can you fix the tun.ko file.. my tun.ko intaller was not avail to load the file after i flash it

I have just gone the pogrammi installed solution?? Problem did not happen the first kernel
---------- Post added at 06:12 PM ---------- Previous post was at 06:09 PM ----------
p960 said:
I have just gone the pogrammi installed solution?? Problem did not happen the first kernel
Click to expand...
Click to collapse
It seems more stable, the battery should I see if I do the usual trick to get on a level in one go! Almost perfect now and I have reinstalled from scratch the only rom installing the new kernel without any other fixes and I have to say the animation goes off perfectly but please make a new fix for the ringtone you hear most in the call and sometimes freezes everything because I did not use the fix screen if you use the animations will not work more
have removed the programs only solution?

karandeepdps said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have compiled this kernel for LG P690 (Optimus Net / Optimus Link) starting from LG Sources
MAKE SURE NOT TO CLEAR ANY CACHE IN CWM OR ROMMANAGER WHILE FLASHING.
FEATURES:
- overclock (up to 1GHz+) + AHB
- ext3/ext4 support (embedded)
- TUN support (embedded)
- VARIOUS governors
- Wake Lock Fix
- CM7 Compatible
- BFQ IO Scheduler (enabled on default)
- Various fixes and patches
- IMPROVED GPU PERFORMANCE
TEXT ALL THE GOVERNORS AND REPORT YOUR VIEWS ABOUT BEST ONE.
Instructions :
- install zip using Recovery (AnyKernel updater)
KD & JST ARE NOW TOGETHER.
ATTENZIONE ALL'OVERCLOCK OLTRE I 940 MHz! FREQUENZE TROPPO ALTE POSSONO DANNEGGIARE IL VOSTRO TELEFONO!
KEEP CARE WITH OVERCLOCK ABOVE 921 MHz! TOO HIGH FREQUENCIES COULD DAMAGE YOUR PHONE!
Disclaimer:
Neither I nor XDA consider ourselves responsible for any damage caused to the telephone,
install this recovery at your own risk.
ANTUTU SCORE 2600 WOW! OMG!
SOURCES:- https://github.com/jstotero/Cucciolone-Rewrite
Note Some Battery tweaks and governors by kd are not included right now soon jst will add it in source.
Click to expand...
Click to collapse
Wow simply amazing.. i have stock w v10d, this work w this wonderful kernel buddy ?
And i want know if gpu is overclocked buddy.
Edit: works w stock rom, but seeing nofrills cpu i dont see any bfq io, only noop and cfq. Is this normal ?

Yes there is not bfq.
Another thing, on stock, ext3/4 doesnt work, infact if i format for example sdext in ext3 it is impossible mount the partition, same thing happen w ext4.
On ext2 no problem obviously.
So, please fix this if it is not a stock rom problem.
Thanks buddy
Edit: stranges glitches during battery charge. Hope in fix soon

Cool!
Nice work done! I see performance increase as such and significant increase in battery Life. There are glitches like when charging the device turned off the screen flashes and stuff but overall nice work really appreciate it .
P.S- Max freq- 979Mhz

This Kernel is under testing so please report all the problems you encounter so we can overcome in next build and check out gps,bluetooth,data everything and report it so that we can make fixes.
NOTE INCLUDE YOUR rOM NAME WITH PROBLEM.
VOTE THE POST

Tzak6 said:
Ok so what's better then ? the CM7.2 http://forum.xda-developers.com/showthread.php?t=1483204 or this rom ?
Click to expand...
Click to collapse
It is based on same rom but Now we are updating cm7.2 v1.

Karan, you are jstotero????

No ofc not.

karandeepdps said:
This Kernel is under testing so please report all the problems you encounter so we can overcome in next build and check out gps,bluetooth,data everything and report it so that we can make fixes.
NOTE INCLUDE YOUR rOM NAME WITH PROBLEM.
VOTE THE POST
Click to expand...
Click to collapse
Thanks. Do you have read my posts buddy? jst says that today will post an update kernel. It will be the same that you will post buddy ?
Ps always on stock rom

How can you overclock to 970, mine freezes and reboot after 864...
Sent from my LG-P690 using Tapatalk

Hi
denzel09 said:
Thanks. Do you have read my posts buddy? jst says that today will post an update kernel. It will be the same that you will post buddy ?
Ps always on stock rom
Click to expand...
Click to collapse
Hello friend, then by just me these problems? When I receive a call after a while no longer hear the ring tone is the most annoying bugs and what I have gone alone, perhaps because the programs often clean the cache with the Android app Assistant18 ?? you do not you lock the screen in sleepmode? try it and tell me friend! turn off the screen with the button and switch it off more quickly as you can for 3 4 times in a row and I will confirm if it stops sometimes found even the locked menu sometimes maybe something in the settings I should be in conflict for example I do not know off the lockscreen is this or else!
Ciao amico allora da solo a me questi problemi??quando ricevo una chiamata dopo un po non sente piu la suoneria è il bug piu fastidioso e quello che mi sono sparite i programmi da soli forse perche pulisco spesso l cache con l'app Android Assistant18???a voi non si si blocca lo schermo nello sleepmode?fai una prova amico e dimmi!spegni lo schermo con il tasto off e accendilo piu veloce che puoi per 3 4 volte di seguito e mi confermi se a volte si blocca ho trovato anche il menu bloccato a volte forse qualcosa nelle impostazioni va in conflitto io ad esempio ho la lockscreen disattivata non so sia questo o altro!!!
---------- Post added at 02:21 PM ---------- Previous post was at 02:14 PM ----------
Expect a stable version! We always talk about the Roma in the testing phase and normal bugs are still the same great job thanks

Ciao non saprei..mmm ma sei sulla stock come me ?
Hi dont know,, on stock like me ?

ho installato la cyanomod sopra il firmwire V10c non aggiornato puo darsi sia questo il problema?ho anche eliminato delle app in questo firmwire non so quale sia il problema
I installed the firmwire V10c cyanomod above may perhaps not updated this is the problem? I also deleted the app in this firmwire do not know what the problem
---------- Post added at 02:35 PM ---------- Previous post was at 02:32 PM ----------
Sono sulla rom originale per adesso!!!

p960 said:
ho installato la cyanomod sopra il firmwire V10c non aggiornato puo darsi sia questo il problema?ho anche eliminato delle app in questo firmwire non so quale sia il problema
I installed the firmwire V10c cyanomod above may perhaps not updated this is the problem? I also deleted the app in this firmwire do not know what the problem
---------- Post added at 02:35 PM ---------- Previous post was at 02:32 PM ----------
Sono sulla rom originale per adesso!!!
Click to expand...
Click to collapse

[ROM][CM11][KFHD7][4.4.4]KitKang[KANG][PORT](Updated 6/20)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS IS A PORT OF CM KITKANG FOR THE KFHD 7"
This is a self-compiled kang of CM11 with cherry picks from CyanogenMod’s Gerrit Instance, most comparable to a CM nightly build. You need not apply if you’re not comfortable with testing out new and possibly broken features.
Click to expand...
Click to collapse
Cherry picks and other modifications
If cherry picks disappear, it's because they were merged, abandoned or conflict with the current source or other cherry picks.
Latest merges to CM source code:
http://review.cyanogenmod.org/#/q/status:merged,n,z
DOWNLOADS
KitKang KFHD7(4.4.4)
Latest Gapps(CM11)
Mirror
KitKang(4.4.4)
Install
1.Boot into Recovery
2.Wipe System, data, cache, dalvik cache
3.Flash KitKang
4.Flash Latest Gapps
5.Reboot and BOOM :laugh:
Credits
HASHCODE for my base and kernel, and pretty much anything else!
makelegs for making this ROM and letting me port it!
Cyanogen
#teamdouche
Coders who submit to Gerrit
RyanMacG for providing euroskank hosting
PartimusPrime for his custom bootanimation​

Bugs
Bugs
All CM Bugs

Un nuevo aporte para la kfhd7 cada ves es mas grande la lista de roms para este dispositivo, exito :good:

Nice, I think I'll give this a try!
Sent from my Amazon Kindle Fire HD using XDA Premium 4 mobile app

viktormax3 said:
Un nuevo aporte para la kfhd7 cada ves es mas grande la lista de roms para este dispositivo, exito :good:
Click to expand...
Click to collapse
Si, me estaba poniendo ansioso por ver mas desarrollo para el kfhd que tuve que aprender por mí mismo y ofrecer una seleccion mas grande! :good:

Prallday168 said:
Si, me estaba poniendo ansioso por ver mas desarrollo para el kfhd que tuve que aprender por mí mismo y ofrecer una seleccion mas grande! :good:
Click to expand...
Click to collapse
En realidad eso mismo me motivo para portar la omni, la hiciste desde código o a partir de otra rom?

viktormax3 said:
En realidad eso mismo me motivo para portar la omni, la hiciste desde código o a partir de otra rom?
Click to expand...
Click to collapse
de verdad! lo hice con un ROM del nexus 7 flo, estoy aprendiendo como construir desde el codigo fuente ahora, es bastante deficil

Does this use Hashcodes work?
Sent from my JellyFire HD

Prallday168 said:
de verdad! lo hice con un ROM del nexus 7 flo, estoy aprendiendo como construir desde el codigo fuente ahora, es bastante deficil
Click to expand...
Click to collapse
No es para nada dificil es lo mas sencillo que hay, creo que haré un tutorial para la kindle Fire
---------- Post added at 08:23 AM ---------- Previous post was at 08:08 AM ----------
Krsmqn said:
Does this use Hashcodes work?
Sent from my JellyFire HD
Click to expand...
Click to collapse
If used as the base ROM hashcode

Running smooth, WiFi dropped a few times, still early. First time, a simple reboot fixed it. Last time, had to wipe dalvik cache.
Sent from my Amazon Kindle Fire HD using XDA Premium 4 mobile app

Sitting right beside my router...
Sent from my Amazon Kindle Fire HD using XDA Premium 4 mobile app

Krsmqn said:
Does this use Hashcodes work?
Sent from my JellyFire HD
Click to expand...
Click to collapse
Yepp it does, forgot to give credit to him! :banghead: . I was tired. Thanks for reminding me!!
Sent from my Amazon Kindle Fire HD using Tapatalk

BookCase said:
Sitting right beside my router...
Sent from my Amazon Kindle Fire HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just noticed this, this morning! I'll def look into it, thanks!
Sent from my Amazon Kindle Fire HD using Tapatalk

Wifi issue
so after a couple hours tinkering with this, I came to the conclusion that the wifi hangs possibly because of rezip issues, might have broken some files while repacking lol, replaced some files and its been running well so far. Ill post an update in a few, just want to make sure i took care of it completely.

Prallday168 said:
so after a couple hours tinkering with this, I came to the conclusion that the wifi hangs possibly because of rezip issues, might have broken some files while repacking lol, replaced some files and its been running well so far. Ill post an update in a few, just want to make sure i took care of it completely.
Click to expand...
Click to collapse
Cool. I'll give another go.
Sent from my SGH-M919 using XDA Premium 4 mobile app

BookCase said:
Cool. I'll give another go.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
link is up now :good:

Prallday168 said:
THIS IS A PORT OF CM KITKANG FOR THE KFHD 7"
Wow.... So you made rom too! It looks pretty good and ill download as it progresses, but i hate the fact that i have to reinstall tweaks and everything else when i change roms
For your own custom Sig : http://forum.xda-developers.com/showthread.php?t=1922304
Click to expand...
Click to collapse

Running smooth. No issues.
Sent from my Amazon Kindle Fire HD using XDA Premium 4 mobile app
---------- Post added at 12:46 AM ---------- Previous post was at 12:44 AM ----------
south956 said:
Wow.... So you made rom too! It looks pretty good and ill download as it progresses, but i hate the fact that i have to reinstall tweaks and everything else when i change roms
Click to expand...
Click to collapse
That's what Titanium Backup is for.
Sent from my Amazon Kindle Fire HD using XDA Premium 4 mobile app

BookCase said:
That's what Titanium Backup is for.
Sent from my Amazon Kindle Fire HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I dont mean problem with apps... I meant system/system folder tweaks and build.prop tweaks
For your own custom Sig : http://forum.xda-developers.com/showthread.php?t=1922304

south956 said:
I dont mean problem with apps... I meant system/system folder tweaks and build.prop tweaks
Click to expand...
Click to collapse
oh, I see.
Sent from my Amazon Kindle Fire HD using XDA Premium 4 mobile app

MIUI 9

Download:
Para instalar la ROM descomprima la ROM miui 9 y cambiar la variante manual mente y vuelta a comprimir el Zip y listo ya tiene la miui 9 for Samsung note 3, por favor recuerde hacer una copia de seguridad.
Inconveniente con la ROM
Cuando conecta los auriculares al momento de hacer una llamada no se escucha nada y cuando desconecte los auriculares sigue el mismo problema.
Error en enviar los msn.
Aver si lo pueden arreglar.
Saludos.
To install the ROM unpack the ROM miui 9 and change the manual variant mind and return to compress the Zip and you have the miui 9 for Samsung note 3 ready, please remember to make a backup.
Disadvantage with the ROM
When you connect the headphones when you make a call, you do not hear anything and when you disconnect the headphones, you still have the same problem.
Error sending msn.
See if they can fix it.
regards
http://www.mediafire.com/file/pqto6tap70209lh/miui+9.zip
http://www.mediafire.com/file/v18c7w2se68eh42/variant.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
me falto poner el autor: zilam
y comprartir la url de la descarga de la rom miui 9 para el samsung note 3 n9008v
gracias saludos cordiales.
http://www.romzj.com/rom/54274.htm

Not development reported.

JJEgan said:
Not development reported.
Click to expand...
Click to collapse
He developed the N900P port from N900V ROM. I asked moderators for separate thread as this is MIUI 9, but previous one was MIUI 8. Moderators opened this thread for calef.
And yes, as long as he mentions bugs in thread, he is also open for other developers to come and improve ROM.

Calef developed this port.
In that case my error.

SS Pleas

calef said:
Download:
Para instalar la ROM descomprima la ROM miui 9 y cambiar la variante manual mente y vuelta a comprimir el Zip y listo ya tiene la miui 9 for Samsung note 3, por favor recuerde hacer una copia de seguridad.
Inconveniente con la ROM
Cuando conecta los auriculares al momento de hacer una llamada no se escucha nada y cuando desconecte los auriculares sigue el mismo problema.
Error en enviar los msn.
Aver si lo pueden arreglar.
Saludos.
To install the ROM unpack the ROM miui 9 and change the manual variant mind and return to compress the Zip and you have the miui 9 for Samsung note 3 ready, please remember to make a backup.
Disadvantage with the ROM
When you connect the headphones when you make a call, you do not hear anything and when you disconnect the headphones, you still have the same problem.
Error sending msn.
See if they can fix it.
regards
http://www.mediafire.com/file/pqto6tap70209lh/miui+9.zip
http://www.mediafire.com/file/v18c7w2se68eh42/variant.zip
Click to expand...
Click to collapse
Is this ROM Appropriate for not3 N9005 ????
تم الإرسال من SM-N9005 باستخدام Tapatalk

Eleo said:
He developed the N900P port from N900V ROM. I asked moderators for separate thread as this is MIUI 9, but previous one was MIUI 8. Moderators opened this thread for calef.
And yes, as long as he mentions bugs in thread, he is also open for other developers to come and improve ROM.
Click to expand...
Click to collapse
its bhflower work!
v 7.10.18
its not miui 9 its miui 8 with miui9 icon!
its stolen rom!
not for him!
and if you attention to his comments on miui8 thread
he said that "i found this rom for n900v"
heh?
---------- Post added at 10:55 PM ---------- Previous post was at 10:54 PM ----------
Hassan_Ezzo said:
Is this ROM Appropriate for not3 N9005 ????
تم الإرسال من SM-N9005 باستخدام Tapatalk
Click to expand...
Click to collapse
yes its support n9005 but karkass version is much better than this

shimsho said:
its bhflower work!
v 7.10.18
its not miui 9 its miui 8 with miui9 icon!
its stolen rom!
not for him!
and if you attention to his comments on miui8 thread
he said that "i found this rom for n900v"
heh[emoji23]
---------- Post added at 10:55 PM ---------- Previous post was at 10:54 PM ----------
yes its support n9005 but karkass version is much better than this
Click to expand...
Click to collapse
If you please karakas file download ....
تم الإرسال من SM-N9005 باستخدام Tapatalk

Hassan_Ezzo said:
If you please karakas file download ....
تم الإرسال من SM-N9005 باستخدام Tapatalk
Click to expand...
Click to collapse
its on miui 8 thread page 124

shimsho said:
its on miui 8 thread page 124
Click to expand...
Click to collapse
Link please
تم الإرسال من SM-N9005 باستخدام Tapatalk

Android Development.
MIUI 8

miui 9 for samsung note 3
shimsho said:
its bhflower work!
v 7.10.18
its not miui 9 its miui 8 with miui9 icon!
its stolen rom!
not for him!
and if you attention to his comments on miui8 thread
he said that "i found this rom for n900v"
heh
---------- Post added at 10:55 PM ---------- Previous post was at 10:54 PM ----------
yes its support n9005 but karkass version is much better than this
Click to expand...
Click to collapse
good night estimated at no time eh mensionado that is of my au the rom miui 9.
and I just want to tell you that you are misinformed about this issue if it is the miui 9 for
samsung n9008v
as mensione in other thread I clearly stated that I found the rom for the already mentioned version and I only made run for miversion n900p, highlighting some inconveniences that is why I came to this prestigious group so they could help on my topic.
The author of this rom is not what you put in mension.
thanks to the author: ZILAN
It is worth mentioning that the rom download it from this web.
http://www.romzj.com/rom/54274.htm
I hope that the link that I bought is very helpful.
thanks cordial greetings

calef said:
good night estimated at no time eh mensionado that is of my au the rom miui 9.
and I just want to tell you that you are misinformed about this issue if it is the miui 9 for
samsung n9008v
as mensione in other thread I clearly stated that I found the rom for the already mentioned version and I only made run for miversion n900p, highlighting some inconveniences that is why I came to this prestigious group so they could help on my topic.
The author of this rom is not what you put in mension.
thanks to the author: ZILAN
It is worth mentioning that the rom download it from this web.
http://www.romzj.com/rom/54274.htm
I hope that the link that I bought is very helpful.
thanks cordial greetings
Click to expand...
Click to collapse
yes you right!
its copy right by ZILAN
If you want to know what im speak about, you can download bh flower version!
either...
its not miui 9!
it's just a themed miui 8 with miui 9 icon
not include any miui 9 future!

Are you saying that this is not MIUI 9 rom but a Themed MIUI 8 .
If so please report it to the mods .
This is the most confusing rom ever posted on XDA .

how can I change the variant mine is N900V

would it support n9002

SACHIN SAM JACOB said:
would it support n9002
Click to expand...
Click to collapse
No dual sim support

[APP] XiaoAi Lite Multi Language (English for now)

This project was born to translate the Xiaomi app needed to manage wireless headphones. Actually i successfully translated all i can in English, maybe there can be something i missed, in this case report me it with a screen.
Actually I'm testing this on Xiaomi Air 2, maybe will be needed some translations also for the others devices.
Screenshoots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
XiaoAiLite v2.7.23 English by mauronofrio
Donations:
​

The firmware update is on the app or released by external server?
Thanks

The update Is on the app. There Is new version of app 2.7.43 for update the air 2 firmware in the 2.7.1.0.
I have version 2.6.2 and the application brings me to update to 2.6.9 but I have not updated for fear of damaging the right headphone, as happened to several users. I wait for a stable firmware without problems.

PieroAnt said:
The update Is on the app. There Is new version of app 2.7.43 for update the air 2 firmware in the 2.7.1.0.
I have version 2.6.2 and the application brings me to update to 2.6.9 but I have not updated for fear of damaging the right headphone, as happened to several users. I wait for a stable firmware without problems.
Click to expand...
Click to collapse
Thank you Pietro. with this version i can use Mi Ai on P20 Lite, the original one has crush on open.
i'll wait for a new release. thank you again.

So nice to see you here. Thank you for your work. I remember you from your TWRP works on the Poco F1

Hi, I just got the headphones and wanted to update them to the latest version, when will the latest version of the translated app come out?
Thanks

I advise you not to update the headphones, I am stuck in version 2.6.2 and they work without problems. In the meantime the application has reached version 2.8.01 from 2.7.43, by updating the application but always in Chinese.
Ti consiglio di non aggiornare le cuffie, io sono fermo alla versione 2.6.2 e funzionano senza problemi. L'applicazione nel frattempo è arrivata alla versione 2.8.01 dalla 2.7.43, mediante aggiornamento dell'applicazione stessa ma sempre in lingua cinese. Con l'aggiornamento delle cuffie 2.7.1 in parecchi hanno avuto problemi con la cuffia destra non più funzionante, oppure battery drain della custodia.

PieroAnt said:
I advise you not to update the headphones, I am stuck in version 2.6.2 and they work without problems. In the meantime the application has reached version 2.8.01 from 2.7.43, by updating the application but always in Chinese.
Ti consiglio di non aggiornare le cuffie, io sono fermo alla versione 2.6.2 e funzionano senza problemi. L'applicazione nel frattempo è arrivata alla versione 2.8.01 dalla 2.7.43, mediante aggiornamento dell'applicazione stessa ma sempre in lingua cinese. Con l'aggiornamento delle cuffie 2.7.1 in parecchi hanno avuto problemi con la cuffia destra non più funzionante, oppure battery drain della custodia.
Click to expand...
Click to collapse
So do you still recommend waiting for a version later than 2.7.1?but can i install the app and wait checking when there will be a version later than 2.6.2? or if I install the app will the update be automatic?
Quindi consigli cmq di aspettare per una versione successiva alle 2.7.1 ? ma posso installare l'app e aspettare controllando quando ci sarà una versione successiva alla 2.6.2? o se installo l'app l'aggiornamento sarà automatico ?
Grazie

I advise you not to update the firmware of the headphones, at least until it is stable and does not create problems. The application installs this in English so you become familiar with the various commands and their position, so the update is not automatic but is proposed to you as soon as they connect to bluetooth. Then you install version 2.7.43 and you will see an update higher than version 2.7.1 of the firmware, at the same time the application even without bluetooth connection and with active connection will offer you to update to version 2.8.1.
Ti consiglio di non aggiornare il firmware delle cuffie, almeno finché non è stabile e non crea problemi. L'applicazione installa questa in inglese così prendi confidenza con i vari comandi e la loro posizione, tanto l'aggiornamento non è automatico ma ti viene proposto appena si collegano al bluetooth. Poi ti installi la versione 2.7.43 e vedrai un aggiornamento superiore alla versione 2.7.1 del firmware, (con questa versione l'aggiornamento proposto sarà alla 2.6.9 delle cuffie), allo stesso tempo l'applicazione anche senza collegamento bluetooth e con connessione attiva ti proporrà di aggiornare alla versione 2.8.1.

This is so usefull. I have a Mi9 and this app works perfect with the Air2. Will be updates ?

Yes the app now Is at version 2.8.01. I attach the apk file so that we can edit it by our Mauronofrio

PieroAnt said:
Yes the app now Is at version 2.8.01. I attach the apk file so that we can edit it by our Mauronofrio
Click to expand...
Click to collapse
Yes please, attach it

mauronofrio said:
Yes please, attach it
Click to expand...
Click to collapse
Hi Mauro, thanks for your job.
Ciao Mauro, grazie per il tuo lavoro. Allego il link a Google drive, l'apk supera i 20mb.
https://drive.google.com/file/d/12MVsSz37DWrm8NBHDEob31uFISfgqxKh/view?usp=drivesdk

PieroAnt said:
Hi Mauro, thanks for your job.
Ciao Mauro, grazie per il tuo lavoro. Allego il link a Google drive, l'apk supera i 20mb.
https://drive.google.com/file/d/12MVsSz37DWrm8NBHDEob31uFISfgqxKh/view?usp=drivesdk
Click to expand...
Click to collapse
Still the same firmware.

kiodo1981 said:
Still the same firmware.
Click to expand...
Click to collapse
Has anyone managed to understand why the animation of the connection to the headphones was removed with the update of the rom? I thought it was a problem of the modified application, I installed the original one but the problem persists.

This literally destroy my Air pro 2, I was upting and the app told me script error, now the right one doesn't work, I tryed everything I could, factory reset.. Everythunf, any kind of help? Thank you

Rozirumodz said:
This literally destroy my Air pro 2, I was upting and the app told me script error, now the right one doesn't work, I tryed everything I could, factory reset.. Everythunf, any kind of help? Thank you
Click to expand...
Click to collapse
You are not the only one to have had this problem after updating. At the moment there is nothing to do, you can only hope for an update that will solve the problem. I have never updated and are still at version 2.6.2 of the headphone firmware, I had recommended it in previous posts .....

PieroAnt said:
You are not the only one to have had this problem after updating. At the moment there is nothing to do, you can only hope for an update that will solve the problem. I have never updated and are still at version 2.6.2 of the headphone firmware, I had recommended it in previous posts .....
Click to expand...
Click to collapse
Wow really?
There is no way to downgrade the air pro 2 from computer or something like?
I always have the baddest luck ever ?

Oh... Luckily my headphones update went well. Didnt read whole thread. Now running on version 2690. Will no update newer.. Still thank you for translating app. Seems update made headphones sound better than when I paired them without app at first time. Aspecially bass. Hopefully Xiaomi will release original app in English.
Still it will be good if headphones settings will be translate because I have no clue what these chinese things means.

Rozirumodz said:
This literally destroy my Air pro 2, I was upting and the app told me script error, now the right one doesn't work, I tryed everything I could, factory reset.. Everythunf, any kind of help? Thank you
Click to expand...
Click to collapse
This is not related to the translated app, however you should make the next update with both headset in the case and it should be fixed

[ROM][Android 13] MyUi 5.0 Stock

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MyUi 5.0 [] Moto One Fusion+
Android 13 Stock
Date: 02/01/2023
Build: Stock 13
Dev: @Veeronez
Changelog:
- Face unlock
- 4GB ram boost
- Improved performance and compatibility
- Vendor r/w with multi-task optimizations and forced encryption disabled
- Moto Dolby (magisk module)
- January 2023 security patch
- New motocam 2.
Notes
After the first boot, register the fingerprint, then install the fix fod module to fix the fingerprint icon on the lock screen
After completing the setup, go to Settings/Applications/Default Apps, select the dialer app as the default app for calls
bugs:
let me know if you find
Installation ↓
Extract it on the computer and run the automatic installer to match your phone model (gooddix or fpc)
Download
- Gdrive -
If Motorola doesn't do it, I will.
Kernel Source: Latest Stock

Hello, sorry for stupid question, but bootloader must be unlocked for this ROM?

LisuR said:
Hello, sorry for stupid question, but bootloader must be unlocked for this ROM?
Click to expand...
Click to collapse
Yes

I had decided to go back to the stock firmware for my One Fusion + and saw your post. I have since switched to MYUI 5.0 Stock. How ever in doing so, it removed the Lineage OS custom recovery and has put and older version of TWRP back. It's not a big deal breaker, but, when I try and boot into TWRP it just blinks over and over. I can power off the phone and reboot it, no big deal. But, I was wondering if there was, and Android 13 OEM Recovery image for the Motorola One Fusion + I can download, and flash it too? Or and updated TWRP for Android 13? I believe the blinking is due to the incompatibilities of TWRP being a lower version and the MYUI being Android 13, lol.
Any hoot, Any help you or some one else here could provide would be awesome and much appreciated! Thanks!

I just want to know there is any way to extend themed icon on myui 5

La puedo instalar en mi Motorola Edge Plus xt2061-3?
Mod Edit: English Translation Below
Can I install it on my Motorola Edge Plus xt2061-3?

POSSO INSTALAR VIA TWRP?
Mod Edit: English Translation Below
CAN I INSTALL VIA TWRP?

arksoother said:
I had decided to go back to the stock firmware for my One Fusion + and saw your post. I have since switched to MYUI 5.0 Stock. How ever in doing so, it removed the Lineage OS custom recovery and has put and older version of TWRP back. It's not a big deal breaker, but, when I try and boot into TWRP it just blinks over and over. I can power off the phone and reboot it, no big deal. But, I was wondering if there was, and Android 13 OEM Recovery image for the Motorola One Fusion + I can download, and flash it too? Or and updated TWRP for Android 13? I believe the blinking is due to the incompatibilities of TWRP being a lower version and the MYUI being Android 13, lol.
Any hoot, Any help you or some one else here could provide would be awesome and much appreciated! Thanks!
Click to expand...
Click to collapse
I was getting the same problem and to solve it I needed to revert back to stock rom, including recovery, then installed the rom making sure I was using cmd because windows terminal was returning fastboot errors. Try this and let me know if works.

Some bugs I've found:
- The background flicker into the action center and recent apps
- If you tap and hold the battery saver icon in the action center it will not open the battery settings page
- Battery usage seems higher then expected
- Sushi Launcher breaks and restarts often
- Press and hold the power button does not open power settings

Hey, just tried installing the rom with the auto installer, it installed completely but now stuck at the moto logo.

nvm it booted

Algum tempo usando essa ROM e estava tudo certo, agora o desbloqueio por digital parou e sempre que conecto um dispositivo bluetooth o celular fica em tela preta, desligo o dispositivo que eu conectei e ele volta, mas reseta todas as opções de aparência

Blu3zinn said:
Algum tempo usando essa ROM e estava tudo certo, agora o desbloqueio por digital parou e sempre que conecto um dispositivo bluetooth o celular fica em tela preta, desligo o dispositivo que eu conectei e ele volta, mas reseta todas as opções de aparência
Click to expand...
Click to collapse
tenta fazer um dirty flash. vai na pasta do instalador da rom e edita com o bloco de notas o auto installer. é só apagar a linha fastboot -w, salva e executa.

How do I install the fingerprint icon module to fix it?I have no idea

Ahaan007 said:
How do I install the fingerprint icon module to fix it?I have no idea
Click to expand...
Click to collapse
To install the module you'll need to install magisk first

Is this really working on one fusion+? and is it laggy? and are fingerprint and front camera working?

For anyone wondering, it's working. Only things that don't work are Ready For and google assistant button

_zaginiony_ said:
For anyone wondering, it's working. Only things that don't work are Ready For and google assistant button
Click to expand...
Click to collapse
So how's the overall experience as compared to Stock A11,
Battery backup, dual volte, any other thing you noticed?
Also, some screenshots would be much appreciated.