Database Info

Dopod 586w

anyone has the CHT rom and can share it? couldn't find it any where.....not even spv-developer and other chinese mobile forum. please help!!!
thanks

http://test.aswing.net/rom/586w.bin

fryrice said:
http://test.aswing.net/rom/586w.bin
Click to expand...
Click to collapse
Is this a production release ROM?
Thanks!

yes.it is a release rom

zhaoyi said:
anyone has the CHT rom and can share it? couldn't find it any where.....not even spv-developer and other chinese mobile forum. please help!!!
thanks
Click to expand...
Click to collapse
zhaoyi,
Have you tried the ROM? Good?
Derek

How do I apply this ROM since this is a .bin file?
Thanks for any response.

Has anybody tried this ROM on a US SDA? I'm really interested in doing it, but I'm too green. Please help!
Thanks!

I'm currently using this ROM on my SDA. It's not that big a deal to install, however, the default language after install is Chinese (well, Taiwanese actually) so you'd better write down how to change the language and locale. Perhaps if you cancelled the automatic setup you'd be able to stop that. The other thing is that ClearType is not turned on by default. Some people may prefer that but I had to find the CTT utility in order to turn it back on again. I had been using the QTEK 8300 ROM prior to this but I really don't notice any difference in terms of the operation of the device. The other thing I did was create my own home screen as the ones that ship with the device, while capable of displaying in english, are designed to be used in Chinese so the fonts are all quite large.
Anyway, enough from me.

EvilSteve said:
I'm currently using this ROM on my SDA. It's not that big a deal to install,....
Would you shed some light on how you install it? I have tried to use typhoonnbfdecode.pl w/ NbfUtils or imgfs_tools to convert the 586w.bin file to nbf format without success. Any hint will be appreciated.
Thanks!
Click to expand...
Click to collapse

New Dopod 586W AKU ROM
http://forum.xda-developers.com/viewtopic.php?t=55282
It gives you a link to the Dopod AKU2 ROM in an exe file. Be forewarned though, the ROM has Traditional Chinese as the default language upon bootup. It also is application locked and I have yet to figure out how to unlock it (unable to change those reg key values we're all so familiar with). If anyone here is able to patch the ROM, I would very much appreciate it if you post the instructions or the patched ROM itself.

[08.02]WM6.EN.Build.AnniversaryofP.L.A.Special.SP by challhsu

This post will be the only where i post my rom on this forum..
Advance Notice
the WM6.EN.Build.AnniversaryofP.L.A.Special.SP seems have known bugs fixed, I plan to cook a CHS ROM. Thanks for all of your supports.
AND, I strongly recommend you to try 里脊肉' ROM, his work is great.
This post may give people who want to cook rom themselves a little help..
And people may take a look at this....It's great...
_________________________________________
Now...
WM6.EN.Build.AnniversaryofP.L.A.Special.SP
91Files
rapidshare: sorry, i can't upload to rapidshare, anyone do, it please give me a message.
This is a update build of WM6.EN.Build.AnniversaryofP.L.A.Special.
_________________________________________
Update:
1 take a bluetooth explorer.lnk to start\accessories.
2 clear useless files on the rom. and compressed the size to 29.5MB.
3 clear the reg files.
_________________________________________
You can find old files on here.

i think you can change title by editing the first post
I got this font in my PC from Office 2007, I already email-ed you Segoe UI, Segoe UI Italic, Segoe UI Bold, and Segoe UI True type
but i will attach the Segoe true type here

I do not know if you find it useful, but just in case you can use one of the font types I am attaching.

I already gave him what he wanted, Segoe UI
That's the font for Windows Mobile 6
challhsu, there are 4 files inside there, bold, italic, true type and , bold italic, hopefully you know which file is the true type.
btw, what is in your ROM, do you upgrade the radio ROM ? IPL SPL ?

challhsu said:
Memory:
Total:44.68MB
Free:27.79MB(62%)
Store:
Total:14.96MB
Free:12.03MB(80%)
Click to expand...
Click to collapse
Sorry if this is a stupid question:
Does this mean that after removing the CN fonts, we'll get another 10MB of free storage?!

and sorry for my stupid question too
but i don't know if for upgrade to this ROM i need to repeat the TeraTermPro procedure or not
thx

stesa said:
and sorry for my stupid question too
but i don't know if for upgrade to this ROM i need to repeat the TeraTermPro procedure or not
thx
Click to expand...
Click to collapse
I ran the exe file. Just like the "official" updates ;-)
No extra steps needed.
Of course your mobile must be sid unlocked...

karhoe said:
I already gave him what he wanted, Segoe UI
That's the font for Windows Mobile 6
challhsu, there are 4 files inside there, bold, italic, true type and , bold italic, hopefully you know which file is the true type.
btw, what is in your ROM, do you upgrade the radio ROM ? IPL SPL ?
Click to expand...
Click to collapse
All ROMs cooked by me would have only os.

nCoder said:
Sorry if this is a stupid question:
Does this mean that after removing the CN fonts, we'll get another 10MB of free storage?!
Click to expand...
Click to collapse
Now, I find a way to change the size of rom, it's under testing...
I removed the Yahei font, but only get 5mb more....And I don't know why.Searching for it.....
___________________________
The coming build08.01
Mem:
total 44.68MB
free 28.10MB(62%)
Sto:
total 19.95MB
free 17.02(85%)

stesa said:
and sorry for my stupid question too
but i don't know if for upgrade to this ROM i need to repeat the TeraTermPro procedure or not
thx
Click to expand...
Click to collapse
Sorry, I don't know the TeraTermPro.

stesa said:
and sorry for my stupid question too
but i don't know if for upgrade to this ROM i need to repeat the TeraTermPro procedure or not
thx
Click to expand...
Click to collapse
No, it's unnecessary to repeat the TTP procedure, you can simply flash the OS.

Is MMS composer included? I would prefer it to be something like the current WM5 MMS composer, as part of the Messaging application.
Sorry dude, but I don't understand those web page from Chinese, google does not translate it properly too

Downloading right now will test a day and report back

Anxiously waiting for the upload. 2 and half hours to go!!

The first time a started the camera i got a reset now every thing is fine now.
After sound update now noise anymore. But i just made 2 emty wav files shutdown and startup.
Stil get the microsoft feedback message.
Now MMS as Stated in the start post.
Goed rom But no office and still las memory.
Keep up the good work Guys

Can you post the Rom link to rapidshare.
Thanks

Waiting for first of August,hehe

arterialzade said:
Can you post the Rom link to rapidshare.
Thanks
Click to expand...
Click to collapse
OK...............
The coming build will post link to rapidshare

Good..
really nice work.I like my new Startup-Animation...

Challhsu, I just got myself a hand on Typhoon NBF tool, can I edit your ROM header data so that the Operator version matches that of the official ROM from Dopod ? ( my phone is Dopod ) Will it work ? Will I brick my phone ?
I don't want to SuperCID because I still got warranty

Request HK English Kaiser ROM dump (for display Chinese project)

Hello all,
Please upload HK English Kaiser ROM dump. I call it HKE here. It will use for make a english cook ROM able to display Chinese.
Procedure in this thread:
http://forum.xda-developers.com/showthread.php?t=334680
I own a HK CHT Kaiser. But I don't like the Chinese interface. Reason to buy CHT version it because I need display Chinese.
Long Text:
I start a project to make WWE ROM display chinese. I was success to make it. But there is problem is WWE ROM's Internet Explorer's signature is not allow by HK telco. For example, I cannot access mobile.three.com.hk (Carrier: 3)
So I need a HKE ROM to test.
Another project is make HK CHT Kaiser use English interface. It is more better to keep those Chinese application (especially voice regconize app). But it is more difficult I thought.
By the way, CHT ROM cannot successfully re-constructed after dump from Kaiser. There is expert here checking on it (i hope). I will continue study how to make it work.
Please upload it if you have.
Related thread:
http://forum.xda-developers.com/showthread.php?t=338201
http://forum.xda-developers.com/showthread.php?t=337090
http://forum.xda-developers.com/showthread.php?t=337066
Thank you,
kfluk

well, my tilt is english ROM, and I add some cab which can let me support both T/S chinese. not CE-Star.

ronan_zj said:
well, my tilt is english ROM, and I add some cab which can let me support both T/S chinese. not CE-Star.
Click to expand...
Click to collapse
Can you upload the ROM?
Pls aware that, if you use cab and instruction in the following page. Uninstall the cab may cause phone and other application not working.
http://www.studiokuma.com/wm/?section=support
I haven't try to find out the reason.
And add those cab is not able to trim down WM6. So I decide to start the project.

i am using helmi_c cooked rom tho, which is not HK english ROM.
sorry..

ronan_zj said:
i am using helmi_c cooked rom tho, which is not HK english ROM.
sorry..
Click to expand...
Click to collapse
ic, it seems no one has such ROM here. I posted in HK forum before to see possible to get it too. If no HKE ROM obtain, the only way is make CHT ROM re-construction work. WWE ROM is not suitable to use in HK. I am use austinsnyc WWE ROM now. As said before, cannot access 3G portal to view streaming video ..etc. I will try to ask telco fix it too.

kfluk said:
ic, it seems no one has such ROM here. I posted in HK forum before to see possible to get it too. If no HKE ROM obtain, the only way is make CHT ROM re-construction work. WWE ROM is not suitable to use in HK. I am use austinsnyc WWE ROM now. As said before, cannot access 3G portal to view streaming video ..etc. I will try to ask telco fix it too.
Click to expand...
Click to collapse
Tadzio is near to put the 2.1 final version of his tools. I hope helps you with the reconstructed CHT ROM to work.

i am actually not using that software from the website you ve shown.

kfluk said:
Hello all,
Please upload HK English Kaiser ROM dump. I call it HKE here. It will use for make a english cook ROM able to display Chinese.
Procedure in this thread:
http://forum.xda-developers.com/showthread.php?t=334680
I own a HK CHT Kaiser. But I don't like the Chinese interface. Reason to buy CHT version it because I need display Chinese.
Long Text:
I start a project to make WWE ROM display chinese. I was success to make it. But there is problem is WWE ROM's Internet Explorer's signature is not allow by HK telco. For example, I cannot access mobile.three.com.hk (Carrier: 3)
So I need a HKE ROM to test.
Another project is make HK CHT Kaiser use English interface. It is more better to keep those Chinese application (especially voice regconize app). But it is more difficult I thought.
By the way, CHT ROM cannot successfully re-constructed after dump from Kaiser. There is expert here checking on it (i hope). I will continue study how to make it work.
Please upload it if you have.
Related thread:
http://forum.xda-developers.com/showthread.php?t=338201
http://forum.xda-developers.com/showthread.php?t=337090
http://forum.xda-developers.com/showthread.php?t=337066
Thank you,
kfluk
Click to expand...
Click to collapse
I currently own a HTC TyTN II running on the following settings.
ROM 1.81.707.0 WWE
Radio Date 09/05/07
Radio Version 1.27.12.11
Protocol Version 22.45.88.07H
I am using CeStar which comes bundled when I puirchase the phone. Is this the english rom you are refering to?

benme23 said:
I currently own a HTC TyTN II running on the following settings.
ROM 1.81.707.0 WWE
Radio Date 09/05/07
Radio Version 1.27.12.11
Protocol Version 22.45.88.07H
I am using CeStar which comes bundled when I puirchase the phone. Is this the english rom you are refering to?
Click to expand...
Click to collapse
Hello benme23,
I am unsure your ROM is the one I want. But if the device is purchase in HK it should be ok. If you use 3 network, this ROM should be able to access mobile.three.com.hk.
kfluk

jcespi2005 said:
Tadzio is near to put the 2.1 final version of his tools. I hope helps you with the reconstructed CHT ROM to work.
Click to expand...
Click to collapse
I just tested 2.1 RC2. It the error is same when use -conservative mode.
kfluk

kfluk said:
I just tested 2.1 RC2. It the error is same when use -conservative mode.
kfluk
Click to expand...
Click to collapse
I sent you a PM....

hi
i'm using the official english version hk tytn II, you cannot use the www.mobile.three.com.hk site.
why not use ce star or monster chinese, both will display and allow you to write chinese and japanese.
kms

kms108 said:
hi
i'm using the official english version hk tytn II, you cannot use the www.mobile.three.com.hk site.
why not use ce star or monster chinese, both will display and allow you to write chinese and japanese.
kms
Click to expand...
Click to collapse
Hello kms,
I mean WWE version ROM cannot access mobile.three.com.hk. HK English and CHinese ROM should able to access mobile.three.com.hk. Because They did test it and have the browser agent.
Not use CE-Star and Monster Chinese is it has relative high overhead and less stable.
My plan is use HK English ROM to make a trim down ROM to allow Chinese display. It will give fast and stable ROM.
If you have HK English ROM, pls upload to somewhere e.g. rapidshare.
thanks.
kfluk

Re-constructed CHT ROM is not expected
Hello,
With Tadzio's imgfs 2.1 rc2. jcespi2005 able to create a ROM with bigstorage flag. But the ROM does not contain some application it should have. Especially the connection tab of setup.
Most worst is Network automatic setup is not working. After quick test, network connection (internet) is not working too even manually add connection setup.
The CHT ROM is quite strange. Now only one small step to next stop.
I need ENG ROM to merge best CHT program and ENG speed stability. No HK English ROM was receive until now.
kfluk

kfluk said:
Hello kms,
I mean WWE version ROM cannot access mobile.three.com.hk. HK English and CHinese ROM should able to access mobile.three.com.hk. Because They did test it and have the browser agent.
Not use CE-Star and Monster Chinese is it has relative high overhead and less stable.
My plan is use HK English ROM to make a trim down ROM to allow Chinese display. It will give fast and stable ROM.
If you have HK English ROM, pls upload to somewhere e.g. rapidshare.
thanks.
kfluk
Click to expand...
Click to collapse
all hk english rom are WWE, and will not display www.mobile.three.com.hk , I got my phone from wilson and it is the official hk version with synergy warranty.
kms

how do you extract the rom from the phone.
kms

kms108 said:
how do you extract the rom from the phone.
kms
Click to expand...
Click to collapse
Here you have the how to...
http://forum.xda-developers.com/showthread.php?t=334680
Cheers.

Viewing mobile.three.com.hk
I also own a CHT Kaiser in HK but I want to use autocomplete....
Therefore, I have to stick with WWE ROM and I had changed it to WWE + Monster Chinese (MC) WM5.3 + MC SIP WM6.
For viewing mobile.three.com.hk, I use NETFRONT v3.3 and this software provides you setting change so that you can view the "3" website without any problem. The setting is as follows:
- Change user agent from "Mozilla/4.0" to "SANYO-S103/1.000 UP.Browser/7.0.2.1.sn.1.222 (GUI) MMP/2.0"
For me, my concern on using WWE ROM is that I will lose the chinese typing capability of the hardware keyboard. Although CE Star can help, it's far too UNSTABLE.
So, hardware keyboard for Chinese typing is my last desire.....

hey kfluk
i just cook a rom with English UI which supports Chs inputting and displaying.
it based on bro Austinsnyc's bigstorage 1st verson.
in my Chs version case, just copy sunglobe.ttf to the dump directory where there is a wince.nls you should overwrite it with the Chs one
and then modify the default.hv(which contains most of registry informations)
change these keys:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontLink\SystemLink]
"Arial"="\\Windows\\sunglobe.ttf,unisun"
"Courier New"="\\Windows\\sunglobe.ttf,unisun"
"Times New Roman"="\\Windows\\sunglobe.ttf,unisun"
"Tahoma"="\\Windows\\sunglobe.ttf,unisun"
and that's all i have done to make my rom support simplified Chinese sung character, i think that should be some help in your CHT case
CHEERS
Sheng

chris_khho said:
I also own a CHT Kaiser in HK but I want to use autocomplete....
Therefore, I have to stick with WWE ROM and I had changed it to WWE + Monster Chinese (MC) WM5.3 + MC SIP WM6.
For viewing mobile.three.com.hk, I use NETFRONT v3.3 and this software provides you setting change so that you can view the "3" website without any problem. The setting is as follows:
- Change user agent from "Mozilla/4.0" to "SANYO-S103/1.000 UP.Browser/7.0.2.1.sn.1.222 (GUI) MMP/2.0"
For me, my concern on using WWE ROM is that I will lose the chinese typing capability of the hardware keyboard. Although CE Star can help, it's far too UNSTABLE.
So, hardware keyboard for Chinese typing is my last desire.....
Click to expand...
Click to collapse
the MC with sip has conflict with some program when installed
htc home customizer and MoDaCo no data will not work.
kms

Clean Rom WWE removed

about 200 downloads, and where is the feedback/thanks ?
roms are only on my harddrive.

xacsx said:
filesize 54,9 Mb (original 101 Mb), free storage 121,19 Mb, free program 79,0 Mb, space in rom 45 Mb
removed: pictures, sounds, HTCHome, quickGPS, rss hub, streamingplayer, touchflo (can't remove icon), onenote, welcomecenter, audiomanager, adobereader, clearvue, excel, powerpoint, word, games, format microdrive, clear storage (can't remove icon), voice speed dial, voicerecorder, worldcard
changed: splash, startupanim (added startupsound), startuproutine (some steps will be skiped, no automatic installation from extended rom)
works again: vueflow
edited: some rgu-files, xml-files
connections must be set by user (mms, isp, network)
download >> http://rapidshare.de/files/40893260/CleanWWEAthe400.zip.html
contact, donate : http://www.xxacsxx.wg.am/donate.html
donations from: h j bambullis, neuwied < thx
s heyne, berlin < thx
Click to expand...
Click to collapse
I do have to say a nice clean rom and very fast. Just need to add the connection setup in it. I truly enjoy the speed. Keep up the good work.

Great job!
But can you make also version of this ROM with standart Microsoft Office (default Word, Excel and PowerPoint)? And with connection setup too
Thank you very much!

removed...

xacsx thank u for your work and for the second version of the clean rom.will flash it,use it and post feedback.

Just finished flashing the 2nd untested ROM - fast as promised, although Internet Explorer doesn't work. No matter what I tried it simply kept on giving an error message about the address being invalid. Opera works fine on the ROM and it certainly has nothing to do with connectivity.
There are 2 "Connection Setup" icons under Settings > Connections, but neither does anything.
Overall I think these are minor issues and I'm impressed by the ROM.
Many thanks!

Can you Post a DIFFERENT than RapidShare LINK?
Please Please do, RapidShare is a Rapid**** actually, it Says (Session Invalid) I tried 18 Times with no avail.
Thanks
Will

removed...

Could you tell me which kitchen you used?
Many thanks

my progs: HTC RIE 0.4.0.47, WinHex 15.1, WinCE CabManager 2.1.0.35, Thememaker X, Thememaker McDeb

xacsx can u make another version of the 2nd version of the clean rom with the original htc startupanim and startup logo?because most ppl here own an htc athena and not the ameo version.

just downloaded 3rd version. i am gonna flash and post feedback

first of all nice work xacsx, really nice work. light and fast rom. the only problem I have found till now is that I cant get IE to connect to any site.

Did anybody tested it on an original full ROM, I mean the one from CMONX package? Maybe the problem is in the source of your ROM?
If the original ROM does not have this issue then the problem came out of some components being removed.

xacsx said:
hmm, i'll test it on both roms (wwe+ger originals uploaded by cmonex)
good idea, i have not tested before
Click to expand...
Click to collapse
xacsx please use the latest wwe x7510 that has been uploaded by cmonex today

Cmonex's ROM doesn't have this problem. I flashed her ROM when she first released it and tested this ROM afterwards.
While this ROM is fast and has VueFlo, I had a better experience with Cmonex's, so I changed back to hers.

NanoRuler said:
Cmonex's ROM doesn't have this problem. I flashed her ROM when she first released it and tested this ROM afterwards.
While this ROM is fast and has VueFlo, I had a better experience with Cmonex's, so I changed back to hers.
Click to expand...
Click to collapse
what do u mean "better experience". in speed,stability? could u be more specific?

we have to be more specific if we want to help xacsx to improve his roms.

which is her new file? I don't see any comments about this new rom on her thread
Thanks
theseas said:
xacsx please use the latest wwe x7510 that has been uploaded by cmonex today
Click to expand...
Click to collapse

ok, i have tryed to customize the new rom. i put one file (a simple pic) in this rom, and the internet explorer wont connecting. i have tryed out with all other roms, the same problem. all programs with internetconnections are working, opera also works.
i dont make another version of the WWE-Rom (i dont need this, i'm german). if you want other romreleases, wait for the roms of the ap-team and/or michyPrima.
thats all

Which rom should I use?

Hi, I use gonzos rom right now but the WiFi and the bluetooth doesnt work... And I am looking for something new.
The problem is that I'm a total newbie on this kind of things, and wondering if someone could just pick a rom that have working wifi & bt. There is so many roms to choose and I dont know which one is best
Another thing is that I want to have working swedish T9, right now it doesnt work with the rom I use.
Sorry if my english is bad,
Thank you very much
Regards, Tomas

I would recommend http://forum.xda-developers.com/showthread.php?t=414416

tipu2185 said:
I would recommend http://forum.xda-developers.com/showthread.php?t=414416
Click to expand...
Click to collapse
OMG, that was a really(!!) fast answer! Thank you, now I want to know why you think that rom is better than the others.

First of all you should know whether you want WM 6.0 or 6.1!
For 6.0 The only recommendation can be New Guava!
For 6.1 there are a lot of different ROMs.
There are "Lite" ROMs (e.g. the one tipu suggested, or mine (link is in the signature).
And there are normal ROMs (e.g. Dr. G's or others) and last but not least there are ROMs with the appearance of the new HTC Rose.

Clean Rom by Fireburned
I would also recommend the clean ROM 1.1 by fireburned. I am using it at the moment and it is extremely stable and I did not have any problem with it. Wifi, bluetooth all seems to work very well.
He might be working on a new version of the clean ROM and I am eagerly waiting for the new version.
Good luck on your search for a best ROM for you.
Thearif

The clean rom looks good. Can I get the black "rose"-theme?
Another question.. The T9cabfiles with swedish, is it a wordlist or just a keyboardmap? Because since the last time I flashed I had the orginal rom before, with swedish language.
I flashed it and tried to use te T9cab-file, and the keyboard worked with the swedish letters åäö but I had to make my own words to the wordlist, because there were not any words in it.
Thank you for the answers!

Can I install this call progres screen on a clean 6.1 rom?

Well the background - yes!
Otherwise no, I don't think so it's only an OEM Package, it's the so called Phone Canvas 2G.
I'll attach the package and you can try it out. The files all go into Windows and the reg settings are in the *.rgu (it's a hidden file)!

In your zip file there are two folders, should I put the content of these folders in win folder?
How to import the reg settings?
I've just flashed the clean rom now to try this.

Yes all of them go into the windows folder if you want to try it. Except the f1450213-7878-4129-b4c5-59bc4573fc58.rgu and f1450213-7878-4129-b4c5-59bc4573fc58.dsm and the 52f4613f-530b-415d-952b-f87fa98b9871.dsm and the mxipupdate_PACKAGE_Rose_PhoneCanvas_2G_0409.provxml! I am attaching a standard *.reg file for you, for which you need a registry editor for WinMo!
But as I said, I don't know if it'll work!

OK, I'll import the reg file but what to do with these files:
f1450213-7878-4129-b4c5-59bc4573fc58.rgu and f1450213-7878-4129-b4c5-59bc4573fc58.dsm
52f4613f-530b-415d-952b-f87fa98b9871.dsm
mxipupdate_PACKAGE_Rose_PhoneCanvas_2G_0409.provxml

Do nothing, you don't need them at all!

It is working 100%
It will be nice if someone can make a cab file with it.
THANKS!

I will. But not today!