I would like to be able to surf the internet within my home using bluetooth to my computer. Tired of gprs/edge speeds and have heard this is an option.
Is this relatively easy (using a bluetooth dongle)? Which one do you guys use and how well does it work?
Thanks
I have had success previously doing this on other devices using a bluetooth pan network. I remember reading a trick using activesynch via bluetooth to get around not having bluetooth pan on the treo(yet). Your efforts may be futile as your speed will not be that fast...if I recall around 112 kilobits/s or less where your 3g will be much faster. It may be fine for local file transfers on your home network though?
I do it all the time and it works great.
rundellbj said:
I do it all the time and it works great.
Click to expand...
Click to collapse
Which adapter do you use? If the Treo uses bluetooth V1.2, is there a specific adapter needed to buy or are most of them backwards compatible?
Would a class 2 long range be a waste of money?
any bluetooth that is higher then version 1.2
Hi, I'm using BELKIN Wireless Bluetooth 2.0 + EDR USB Adapter F8T012, Sale price: $14.28 on eBay and it works fine too.
Gcolla
Related
Hi!
I am still unsure if I should get a bluetooth GPS or a wired one.
The wired ones are about half the price of the bluetooth at the moment.
I wonder how the USB GPS are powered? Do they need a seperate battery or do they get their power from the XDA over USB?
Can I put my XDA in the cig-lighter for power and the GPS in the XDA without needing any additional batteries?
Thanks for help!
Dominik
You cant use a usb gps with your xda, you will need a serial gps, I have been involved with gps navigation for pda's for some time now. I cannot see that a bluetooth gps has any advantage over a wired system if it is for use only in the car, the xda needs to be powered for anything other than short journeys so it is still wired even if you use bluetooth. I am about to sell my xda2 as bluetooth was the main reason for getting it however I think my xda1 with 64 meg ram and 256 sd card does all I want it to, I will be using a dirt cheap digitraveler gps which I can also use with any other computer with a serial port, if no serial exists on the laptop I can use a usb to serial adaptor. Having said all that, if the person uses the gps away from the car then bluetooth is a bonus as the gps is self powered, but so is the digitraveler, though larger and heavier it runs on 3 x aaa batteries and could be used away from the vehicle. Its different strokes for different folks so buy what suits your needs. By the way the Fortuna GPSmart and the Holux gr-230 can be used as a wired gps using a cheap optional cable/charger, or as a wireless bluetooth gps, both run at a fast 38400 and are very good at the task of locking to gps.
GPS
Hi!
I have an XDAII. Do I need a serial or USB GPS for it?
So, with that wired GPS, is the setup stated above possible? Like no batteries in the GPS, connected to the XDAII being charged by the cig-lighter itself?
If not, I would have to charge two devices at the same time during long travels....
Thx
Dominik
You could buy a cheap haicom gps, with all the serial gps kits you get a lead with a lighter plug connected, the same lead powers the gps and the xda/pda. Have a look here and use the drop down box on the haicom ad, choose xda, very cheap, very effective and powers both xda and gps. This is for use in car only. For less than £50. Also you can obtain various leads for it that will allow you to use it with another pda/laptop/pc etc.
http://www.globalpositioningsystems.co.uk/allprods.php?category_id=14
Will it power and work on the XDA II.
Yes, make sure beams in unchecked under settings/connections, in tomtom choose tomtom gps then choose com1.
I'm attempting to use an Android phone as a WiFi adapter for an Xbox 360. I know it's impossible to do via the USB sockets, so I'm not even going to breach that. However, I think I may have found a new approach that may be more successful.
While digging through some junk at work, I found two adapters that got me thinking. The first was a mini-USB to USB, and the second was an ethernet to USB. The two fit together perfectly.
So now I'm attempting to get internet sharing to work on the phone to the 360 via a jerry rigged chain of adapters. it can be summed up as
XBox -> Ethernet cable -> ethernet to USB -> USB to mini-USB -> Droid Eris(running OMGB, an AOSP 2.3.3 rom)
Can anyone think of a way to get it to pass the internet connection down the line from Eris to Xbox? At the moment, the native USB tethering isn't working. I can't seem to find useful apps when searching the market.
Why not get a wifi adapter for the xbox and then tether using your phone as a wireless hotspot.
fosselman said:
Why not get a wifi adapter for the xbox and then tether using your phone as a wireless hotspot.
Click to expand...
Click to collapse
two main reasons...
1) don't feel like spending $90 on my roommate's 360(the two adapters would have cost me $4 total if I were to buy them in a store, but I got them for free through work)
2) it's way more fun to see if something hand made works than it is to go out and buy a freakishly overpriced adapter to do the same thing.
I think you can find the wireless G adapters fairly cheap on eBay as the new ones are N, but G should do you fine as long as your phone(hotspot) is in the same room.
I just traveled to Japan last week and most hotels over there are still not big fans of wifi. So, they usually have ethernet wired rooms for internet. I tried to use my OTG to ethernet adapter to connect the ethernet connection to my Razr Maxx HD. Unfortunately, it did not work. But I noticed on the phone there are settings for the ethernet connection but they are available to make changes or selectable. The adapter that I used came from my cheap travel tablet that uses an OTG/mini usb to ethernet adapter to connect to the internet. The tablet and my laptop connected just just fine. No recognition or anything when plugging the adapter into the Razr. I would like to skip taking the tablet in the future if I can just use my phone. Or quite possibly use the ethernet connection to enable the phone's hot spot connection. I am wondering if anyone on this forum used an ethernet connection with there Razr HD and if so what is needed to get it to work? Thanks in advance.
RDS_41 said:
I just traveled to Japan last week and most hotels over there are still not big fans of wifi. So, they usually have ethernet wired rooms for internet. I tried to use my OTG to ethernet adapter to connect the ethernet connection to my Razr Maxx HD. Unfortunately, it did not work. But I noticed on the phone there are settings for the ethernet connection but they are available to make changes or selectable. The adapter that I used came from my cheap travel tablet that uses an OTG/mini usb to ethernet adapter to connect to the internet. The tablet and my laptop connected just just fine. No recognition or anything when plugging the adapter into the Razr. I would like to skip taking the tablet in the future if I can just use my phone. Or quite possibly use the ethernet connection to enable the phone's hot spot connection. I am wondering if anyone on this forum used an ethernet connection with there Razr HD and if so what is needed to get it to work? Thanks in advance.
Click to expand...
Click to collapse
Don't bother.just get a mini router like the old Apple airport express.
Sent from my DROID RAZR HD using Tapatalk 2
Ok so I have a Playon wireless controller for pc (I cant find any reference to this brand online) which I Bought a few years ago. It has a usb reciever and has an LED on it that indicates that it is communicating with the usb dongle and has small text under it saying RX 2.4 ghz. The problem is that I would like to connect it to my HTC desire s but I've had problems with using usb host ( an easy way to use an otg cable would be appreciated) is there a way to connect it to my desire s, as I also have several wireless ps2 controllers but I think they use the same system.
Me, too
Rudolph Venter said:
Ok so I have a Playon wireless controller for pc (I cant find any reference to this brand online) which I Bought a few years ago. It has a usb reciever and has an LED on it that indicates that it is communicating with the usb dongle and has small text under it saying RX 2.4 ghz. The problem is that I would like to connect it to my HTC desire s but I've had problems with using usb host ( an easy way to use an otg cable would be appreciated) is there a way to connect it to my desire s, as I also have several wireless ps2 controllers but I think they use the same system.
Click to expand...
Click to collapse
[BUMP(i think)]
Rudolph, I have the exact same problem!
I have a Logitech Cordless Precision Controller, apparently made for the PS3, and it says it runs on 2.4ghz wireless.
If Bluetooth is on the 2.4ghz spectrum, then surely it should be able to cross-connect with a little bit of freeware.
XDA Developers should try to come up with something like this, because that would open a whole new spectum of devices that could be connected.
In any case, there should definitely be some way to connect these devices.
My controller doesn't have a usb port, but I have another older one that I got from a thrift shop that works amazing on my laptop, but when I try to plug it into my kindle through a coupler and the actual kindle cord, it doesn't give power to the controller, as its a normal usb-only controller, so it doesn't have batteries.
New Idea
So, it seems the solution may lie in the controller, maybe it would be worth getting a cheap controller somewhere and adding a battery to the circuit. That is if the phone would recognise it.
Hi
after 4 years I wanted to replace my puny Hyunday car radio with something more versatile and powerful. My two main requirements were integrated DAB+ and Navigation. So I ordered a 7" Klyde KD-7022 HU with a 8 Core A53, 1.6GHz, 32G ROM, 2G RAM and all the bells and whistles I could get. Beside DAB+ and Navigation I ordered Dashcam, Rear Cam, OBD2 and 4G Stick. Everything arrived and it took some time to build all components in my car. Now after some modifications on brackets and cables all is installed and almost everything works. Altough the DAB+ app looks awful and the iGo Navigation doesen't satisfy me 100% I'm quite happy with the result.
Now I still have issues with the 4G Stick which claims 'SIM card removed' every time I start the car. After a reboot the stick works as Wifi Router. But I cannot establish the connection via USB cable. I only get the Wifi signalstrength display. I don't get a 3G/4G signalstrength displayed. Internet connection is established via Wifi. Has anybody made the same experience and has a tip for me? I read something about the app 'PPP Widget' which should help. But this widget needs root access which leads me to the second issue.
I haven't yet found a rooting method which works on my Head Unit. I'm quite experienced with rooting handys and tablets but with car radios I'm a newbie. How do I enter recovery mode? Do I need ADB connection or can the device be rooted via app? Has anyone successfully rooted a PX5 with Android 6.0.1? I would be glad for any hint or link.
Thanks for all answers. They are very welcome
Thanks