Related
Anybody know / tested if TomTom works on the Vox? Which version in that case?
I know that 5.2 works! I also heard that 6 works with some tweaks
samyboy said:
I know that 5.2 works! I also heard that 6 works with some tweaks
Click to expand...
Click to collapse
Anybody sitting on those tweaks? Like to have them...
I am successfully using TomTom_6.020_for_Windows_Mobile_Smartphone on my VOX including newest CE maps. No problems at all.
kickasso said:
I am successfully using TomTom_6.020_for_Windows_Mobile_Smartphone on my VOX including newest CE maps. No problems at all.
Click to expand...
Click to collapse
HEY,
THE VERSION IS THE SAME FOR SYMBIAN 3D EDITION?
or it's another one?
many thanks
i use now a tomtom 6.030 but i can't use a scroll for make a choice.
did you upload a link for EMULç please
Just installed TomTom 6 for PPC, and it worked fine on my Vox. You can do everything with the four way button, and the softkeys. I did not need to use any fake cursor or anything. I have a standard tomtom gps though, so the settings for gps were pre-configured.
Yep using 6.030 (8320)
The tricky part was to setup TomTom, now it's running smoothly.
1st) Install - install was not working so the option was to copy correct files from PocekPC version. After that no problems to run TomTom.
2nd) Set up GPS or multiple maps, generally when you have to choose from list there is no option to use D-Pad. For that purpouse I've used fakecursor with xbar3. When "in TomTom" I've called xbar3 and from there fakecursor to setup GPS and correct map. Of course you need to setup xbar3 to have FakeCursor link in there. For GPS you need to assign COM port in Bluetooth settings.
Pain in the a** was that I was not able to switch fakecursor off becouse none of the buttons (except D-pad) were responding. So to switch it off I've had to remove battery. However this is only one time job since after setting things up you can use your keyboards only.
3rd) Small glitch while using TomTom when you need to "Cliclk" you need to use left soft key - action key on D-pad is acting like "double-click".
Uff... took some time to do it.
Now
Kusnier
Hi, I could make TOMTOM 6 work, but I just can't use it because the keyboards don't work properly. Neither the phone keypad nor the QWERTZ keypad (it's a German vox).
I can't select in the lists ans I can't correct input-mistakes because I don't have a backspace-button.
Is there any way making TOMTOM work properly?
And another thing: how can I create a shortcut in the start menu? And how can I create shortcuts on the home-screen?
Thanks,
Cheesy
TT6.02 works fine on my S710
Hi,
TT6.02 works fine on my S710.
I've made a movie so u can see how it works:
http://www.verwarmingspagina.nl/clips/NVEExport.mpg
Regards,
Schmia
awesome it works perfectly!!! can u write me in a pvt mess THE correct version please? thanx
kusnier said:
Yep using 6.030 (8320)
The tricky part was to setup TomTom, now it's running smoothly.
1st) Install - install was not working so the option was to copy correct files from PocekPC version. After that no problems to run TomTom.
2nd) Set up GPS or multiple maps, generally when you have to choose from list there is no option to use D-Pad. For that purpouse I've used fakecursor with xbar3. When "in TomTom" I've called xbar3 and from there fakecursor to setup GPS and correct map. Of course you need to setup xbar3 to have FakeCursor link in there. For GPS you need to assign COM port in Bluetooth settings.
Pain in the a** was that I was not able to switch fakecursor off becouse none of the buttons (except D-pad) were responding. So to switch it off I've had to remove battery. However this is only one time job since after setting things up you can use your keyboards only.
3rd) Small glitch while using TomTom when you need to "Cliclk" you need to use left soft key - action key on D-pad is acting like "double-click".
Uff... took some time to do it.
Now
Kusnier
Click to expand...
Click to collapse
Thanks for the info! I've tried to install by copying the files from a PPC memory card to the Vox memory card and then execute the cab for tomtom 6.03. The installation then dies on me...
When you say "copy correct files from PocekPC version" do you mean only the files from the \program files and the \My Documents folder? Or are there more files in the windows folder?
//Jerry
Ooops, I tired to copy the stuff in \Program files\Navigator and \My Documents\TomTom\ ... And it worked!
Thanks a lot you all!
//Jerry
schmia said:
Hi,
TT6.02 works fine on my S710.
I've made a movie so u can see how it works:
http://www.verwarmingspagina.nl/clips/NVEExport.mpg
Regards,
Schmia
Click to expand...
Click to collapse
Great video, but it does not show you using the up/down key during the address selection. Can you show the up/down working? Thanks
tjmvdz said:
Just installed TomTom 6 for PPC, and it worked fine on my Vox. You can do everything with the four way button, and the softkeys. I did not need to use any fake cursor or anything. I have a standard tomtom gps though, so the settings for gps were pre-configured.
Click to expand...
Click to collapse
hi
Exactly which version of TomTom 6 are you using, and you have the HTC S710/E650, with all the up/down keys working in the address selection?
Thanks
tjmvdz said:
Just installed TomTom 6 for PPC, and it worked fine on my Vox. You can do everything with the four way button, and the softkeys. I did not need to use any fake cursor or anything. I have a standard tomtom gps though, so the settings for gps were pre-configured.
Click to expand...
Click to collapse
Does the 4 way button work when selecting an address (up / down) and does the 4 way button work when browsing the map (up / down) , it only works left and right for me. Which version of tomtom are you using and are you using the E650/HTC S710?
Thanks
levanter said:
Great video, but it does not show you using the up/down key during the address selection. Can you show the up/down working? Thanks
Click to expand...
Click to collapse
U don't need the up/down key.
Just type in the adres and when it is at top press the button int the middle of the jog button (enter)
Regards,
Schmia
hmmmm - pretty crap solution though.
At the end of the day ttn6 is PPC software not smartphone and it seems tomtom have no plans to release a smartphone version!
The other thing that pisses me off about tomtom at the moment is, if I do decide to upgrade (upgrade - thats a laugh - buy the product again) then I also have to "upgrade" (buy) all of my USA maps again too.
It seems to me that they are focussed on their all in one units and really couldn't give two hoots about us mobile/ppc users who have been with them for a long time.
At £75 for the software (all of Europe) I am going to give Route 66 mobile 7 a go. Hopefully it will be bye bye tomtom
schmia said:
U don't need the up/down key.
Just type in the adres and when it is at top press the button int the middle of the jog button (enter)
Regards,
Schmia
Click to expand...
Click to collapse
Well it's not that crappy as you think
It works very fine for me.
I have absolute no problems with this version of TT6 running on my HTC S710.
Regards,
Schmia
schmia said:
Well it's not that crappy as you think
It works very fine for me.
I have absolute no problems with this version of TT6 running on my HTC S710.
Regards,
Schmia
Click to expand...
Click to collapse
I've installed TTN6 with a PPC emulator and copying the files to microSD card and I think it's working great on my S710 except one thing:
The display switches completely off after 30sec like when the phone is in standby mode on the homescreen.
I'd like that TTN6 doesn't switch the display off when it's running.
Don't you experience this issue? And has someone a solution?
perry185 said:
I've installed TTN6 with a PPC emulator and copying the files to microSD card and I think it's working great on my S710 except one thing:
The display switches completely off after 30sec like when the phone is in standby mode on the homescreen.
I'd like that TTN6 doesn't switch the display off when it's running.
Don't you experience this issue? And has someone a solution?
Click to expand...
Click to collapse
Yes i know this problem.
I had this problem with version 6.02.
Version 6.0 doesn't switch to homescreen while using TomTom.
Regards,
Schmia
ehi guys that trick worked and it works great!!!! u guys rule
I upgraded my phone from an iPaq 6300 running WM2003 to an XDA Atom Exec running WM5. I am happy with the upgrade except for a few things, one of which is the sluggishness in changing the Input Method.
On my old Ipaq there was an arrow tab letting you instantly click on it and switch between Transcriber, Letter Rec, Block Rec, or keyboard. Here on the Atom you click on the input method icon, the tab appears, then you click on it THEN it takes forever for the menu to come up to select the changes.
Is something amiss here? Or is this really how slow WM5 changes input methods?
Bump? To the Top.
Funny.. I just added this to the prophet wiki... this solved the same issue on my prophet. Maybe it'll help for you:
http://wiki.xda-developers.com/index.php?pagename=ProphetFAQ
A hard reset solved this problem for me... Of course, make sure you've backed up all you need before doing so
iPaq 6300 and wm5
Mochan said:
I upgraded my phone from an iPaq 6300 running WM2003 to an XDA Atom Exec running WM5. I am happy with the upgrade except for a few things, one of which is the sluggishness in changing the Input Method.
On my old Ipaq there was an arrow tab letting you instantly click on it and switch between Transcriber, Letter Rec, Block Rec, or keyboard. Here on the Atom you click on the input method icon, the tab appears, then you click on it THEN it takes forever for the menu to come up to select the changes.
Is something amiss here? Or is this really how slow WM5 changes input methods?
Click to expand...
Click to collapse
Hello Mochan,
can you please provide a link for the firmware you've used for 63XX.
Thnaks.
Hello guys!
I´ve just upgrade my treo 750 to WM6 and as soon as I upgraed I installed iSilo the version 5.00 but it crashes!!! works very slowly and crashes, i´ve wrote in the isilo forum but didn´t get any answer from them and i really need this program. Do you know how to fix it? thanks in advance mates
Simple fix, just need a little patience. There is a bug in iSilo that slows it way down so that it acts like it is crashed when Automatic Refresh is enabled. You have to turn off Automatic Refresh in Tools>Options>List menu from the main menu. Just tap and wait, the menu will eventually change.
-Aahz-
Aahz63 said:
Simple fix, just need a little patience. There is a bug in iSilo that slows it way down so that it acts like it is crashed when Automatic Refresh is enabled. You have to turn off Automatic Refresh in Tools>Options>List menu from the main menu. Just tap and wait, the menu will eventually change.
-Aahz-
Click to expand...
Click to collapse
thank buddy, now it seems to work as well as always
thanks again for your help, i didn´t wan´t what to do at all
Aahz63 said:
...You have to turn off Automatic Refresh in Tools>Options>List menu from the main menu....
-Aahz-
Click to expand...
Click to collapse
Thank you for the tip. Now it's much faster for me too.
palm treo 740
I will buy a palm treo 750 from my friend , he has AT&T . I need to get the number to unlock the phone can any one help me with this info????
I need info onnhow to unlock a palm treo 750 to connect to my t-mobile sim card, can you help with info???
It seems that with this new build of TomTom 7 smartphones are supported now !!!
The problem with earlier releases was that you couldn't scroll down to select the second, third etc line. This now works. Great news. but...
I installed it on a HTC Tornado (qtek 8310) and it works fine. The problem on the S710 is again the backlight going off after a while. Dit anyone try this new version already and do you have the same problem with the backlight?
I know there was a program called Kahuna TTn6 Focufix.cab to keep the focus on the program. maybe this works? I will try to find this program and see if it helps. Maybe we have to modify the key HKCU\Control Panel\Power\Display again?
I hope some of you can help me find a sollution, so we all can use the newest TomTom version on our Vox !
I found the TTn6 Focufix.cab, but this doesn't work.
I did find a workaround: I set the display time-out when on ac power to never. This works. So when I am in the car the battery is charged and the display stays on.
TomTom 7.915 on Fireburner custom ROM 1.0
I am using TomTom 7.915 since I install the custom ROM from fireburner.
This release works on S710 but with same limitation/problem, but you can select the different icon of the menu without any problem. The navigation can be vertical with the phone close, or horizontal if you have the keyboard open.
These are the Four main problem I have found, and the solution I have use to work around:
1. Backlight going off. When I am using it I plug the phone with the power supply, otherwise battery go away immediately after you arrive at destination or when you are close to it. I solve this problem in the "Settings"+"power Management", and select "never" in "Display time out on AC"
2. Backlight always on after use TomTom. I run an application free that you can download from http://www.tgmaker.com/mobile/
3. Input a destination. The two keyboard of the S710 works, but only with number when present. I means that with the number keyboard TomTom take only the numbers, and with the Qwerty will take the letter if they are alone and the numbers if on the key have both. Same problem was in Opera mini, and you can solve in the menu settings.
Sol. A
I solve this problem saving a contact with the address, and select the destination to contact.
Sol. B
You can browse all the city and the street, you must have a lot of time, or if you know the ZIP code the search became faster.
Sol. C
Fakecursor works but are more the disadvantage that the benefits. When you run it you can use only it, and all the shortcuts with the keyboard doesn't work. I prefer plan the destination and recall them after.
4. Selection: When in the display you have only two possibility there are no problem, but when they are more, the option in the middle are difficult to select. I have find the possibility to select using shift+same key, but I found it very uncomfortable.
Now a challenge to the expert!!
My colleagues use TomTom 7.915 on Experia X1, and you can select all the function using only the keyboard. I have seen also a Touch Pro working very fine with it. The two device have different layout (4 and 5 lines) and the software is working perfectly. I was thinking that most probably TomTom call some driver install on the device for the keyboard layout and allow the software to run properly. My device have a fb custom ROM, and I have a stupid idea which maybe work! If we save the driver of the S710 with the same name of the driver TomTom is looking for the layout keyboard, may be we can use both the keyboard.
I know is a strange idea, but I cannot test since I don't know which driver TomTom is looking for when start up.
Bye
are you sure of number 2? I know that tomtom mobile 5 makes the reg key value HKCU\Control panel\Power\Display if it doesn't exist and set the value to 0 after closing tomtom. I don't think tomtom 7 has the same behaviour. Can you try removing the Display value and see if tomtom 7 creates it again.
number3: I didn't have this experience. I do use another rom. Maybe it has to do with enabling the T9 setting of the keyboard? I can use the number keyboard to make letters and select the right city and street.
number 4: good point. I hope somebody knows this
did some more tests just to be sure:
1. problem is the display goes out after a while. workaround is to set the display timeout in the poweroptions to never when on ac power.
2. tomtom7 doesn't make the value Display after closing, so the ptoblem doesn't exist. (there may be other programs that cause this problem, but it is not related to tomtom7)
3. when using the number-keypad all works fine. when using the full-keyboard there is a problem with the keys also used for numbers (like E R T Y). you get numbers when pressing these keys... I like the idea of whanging the keyboard-layout/driver somehow...
4. I don't really understand what you mean. selecting what?
walram said:
I found the TTn6 Focufix.cab, but this doesn't work.
I did find a workaround: I set the display time-out when on ac power to never. This works. So when I am in the car the battery is charged and the display stays on.
Click to expand...
Click to collapse
TTn6 Focufix is to prevent Tomtom 6 to go back to today screen on smartphones after a while
walram said:
did some more tests just to be sure:
1. problem is the display goes out after a while. workaround is to set the display timeout in the poweroptions to never when on ac power.
2. tomtom7 doesn't make the value Display after closing, so the ptoblem doesn't exist. (there may be other programs that cause this problem, but it is not related to tomtom7)
3. when using the number-keypad all works fine. when using the full-keyboard there is a problem with the keys also used for numbers (like E R T Y). you get numbers when pressing these keys... I like the idea of whanging the keyboard-layout/driver somehow...
4. I don't really understand what you mean. selecting what?
Click to expand...
Click to collapse
Dear walram
I am sorry but I discover that I was running the TTN7.910.9185_vga_black for the Diamond.
I download the new version and I confirm that is working on S710.
1. Ok I have done the same
2. You are right for this point, no need tools for the backlight.
3. Number-keypad all works fine in this version, problem with the qwerty keyboard is still present.
4. In version 9196 the graphic is totally different, in not just a matter of resolution and I believe was developed for specific device. If you press center key pad 6+5 you can see the version of Tomtom , and you have 3 possibility
- copyrigth
- account
- done
I am not able to select Account.
During the installation I was not able to select the correct com port, since look like the cursor was not enable to move, or this version was designed for COM9. I copy the *.exe and *.chk file on the old installation and is fine.
I believe that this version take out from the lolite is the most suitable for the s710. Then finally for who love TomTom, at least they should try it, since interface is almost the same of 5.2 for SP and the overall function looks ok.
If I found bugs or problem I will post later in this section.
Bye
i see what you mean with point 4. I don;t know a sollution for that, but i think you don't really need it for daily use. i could select the right com-port (com 6). installed it on 5 devices already, no problem.
the only bug i found so far is when starting the demo for a route the buttons are switched. so the "ok" and "cancel" are switched. just that you know...
it would be nice if somebody can fix the full-keyboard layout problem... it seems a problem with the s710?
it would also be nice if somebody can write a simple program that creates the registry key to keep the display on when the program is running, and delete the key when tomtom is closed. anybody?
i could select the right com-port (com 6). installed it on 5 devices already, no problem.
Click to expand...
Click to collapse
I'm NOT a big fan of TOM TOM but I've tried for the first time to figure out this problem and so far I totally agree with Dom_LC
COM selection is locked IMHO. I've tried to edit navigator.cfg to use COM7.... DONE...but it was useless
then I tried to add COM9 to my Bluetooth outgoing ports...it was selectable but obviously the system was unable to create the port.
I tried also to mix data file with the exe to see wath's what ...useless.
Tried fakecursor and eCursor...they worked everywhere but in the COM selction MEnu.
well, that's kind a strange isn't it? can you use the up and down-button when selecting a city and when selecting a road? are you using version 7.915 and not 7.910?
Sure! and I'l tell you something more interesting also when composing the destination I can't scroll from the vorious suggestions that are indexed along when you are typing (the only that is always selected is the first in the list as for the COM ports)...so the only way is to write the exact name
interesting. so maybe there are more versions of the 7.915 around? something to do with the rom?
anyway i can scroll from the vorious suggestions everywhere. Maybe i should send you my version and see what it does on your vox.
I had the following files:
ttn7.915.9196.qvga_black.cab
ttn7.915.9196.qvga_blue.cab
ttn7.915.9196.vga_black.cab
i installed the middle one.
a did find a bug, so it seems. How do you select a differect country when typing a city? On a PDA you can select the country on the right side of the screen. but how does it work on a smartphone? eg. I am from the netherlands and the only city's i can select are from the netherlands. In earlier versions of tomtom all city's of europe were in the same list. can anyone confirm this bug?
Yep Walram, this bug is on my StarTrek too, TT started in Belgium for me and i had no clue how to change the country to Netherlands, so i navigated to one of my dutch contacts and that did the trick, so, maybe a bit odd, but you could add a fake contact in the country of your choice to end up over there.
Nevertheless....this is an inconvenient bug since it doesn't allow you to travel or plan through whole of Europe
i wonder if the selection of country is in the map or in the application. eg. if we install an old map (version 7 or 6) do you get 1 list with all city's of europe?
so tomtom has some work to do again to fix this bug.
if you remove the mapsettings.cfg in the map-directory before starting tomtom you get the question once to wich country you want to navigate
so, a little, workaround. you also loose your home adres and favoutites i guess...
but it works... just that you know
well, that's kind a strange isn't it? can you use the up and down-button when selecting a city and when selecting a road? are you using version 7.915 and not 7.910?
Click to expand...
Click to collapse
I tried blue and black version. I think it was black wich did not let me select something with the up and down keys. So try both versions.
By the way installation failed every time on my Vox (Rose v.0.4)
So I extracted the files with win ce extractor, putted them on the root of the SD card and all went well.
Ierlanfdan said:
I tried blue and black version. I think it was black wich did not let me select something with the up and down keys. So try both versions.
Click to expand...
Click to collapse
I Can Confirm that! Smartphone users can take advantages ONLY from the blue one! And this ends my adventure with tom tom.
help
i have a vox with original ROM (mobile 6) and i can't install the tomtom... it start the cab and suddenly stops and go back to home screen...
does anyone can help me... I've tried the qvga version black and the ttn7.915.9196.qvga_blue_cuckoo.cab. both do the same thing.... they start and suddendly stop...
the install bar doesn´t move, and the waiting color circle disappears and go back to home screen...
can you put here the link to the version you have for me to try??
thank you and sorry for my bad english....
It's for PPC, you can't instaqll on a Smartphone, so you have to use this method
http://forum.xda-developers.com/showpost.php?p=3224919&postcount=776
TheBo said:
It's for PPC, you can't instaqll on a Smartphone, so you have to use this method
http://forum.xda-developers.com/showpost.php?p=3224919&postcount=776
Click to expand...
Click to collapse
i try it but i can't copy the shortcut.... said i can't do it... any alternative method to copy it...
thank you...
Hi HD2 Experts,
I am unable to enter co-ordinate on Garmin Mobile XT. I am able to enter co-ordinate by connecting HD2 with MyMoblier via my desktop.
I assume the numeric and arrow key buttons of "Edit Coordinate" is too small. Also this screen wont respond to stylus or HD2 doesnt have a stylus its very difficult.
I assume this is due to Garmin Mobile XT wasnt designed for such high resolution.
I have done google around, nothing came up similar to the problem I am facing.
Any idea how to fix this ?
Thanks,
Dwija
I haven't tried it but possibly Zoomer could help.
I know the problem you are stating, quite annoying, I just keep adjusting my touch aim until I get the desired result, which does take some patience.
where is the Zoomer ? how to use it when on this screen ?
Zoomer is an app, just search this forum or google it.
It allows zooming in on any part of the screen so enlarging any small things just like the problem we have in garmin, once the small things are large its not so hard to do what you want.
I'm sure it will work well to solve the problem. (I will have to try it myself for garmin, I have used it for other programs).
dwijadas said:
Hi HD2 Experts,
I am unable to enter co-ordinate on Garmin Mobile XT. I am able to enter co-ordinate by connecting HD2 with MyMoblier via my desktop.
I assume the numeric and arrow key buttons of "Edit Coordinate" is too small. Also this screen wont respond to stylus or HD2 doesnt have a stylus its very difficult.
I assume this is due to Garmin Mobile XT wasnt designed for such high resolution.
I have done google around, nothing came up similar to the problem I am facing.
Any idea how to fix this ?
Thanks,
Dwija
Click to expand...
Click to collapse
On my HD2, using Laurentius26's Platinum V2.0 ROM, using Garmin XT 5.00.20wp, it works fine. You have to clear the field with the 'backarrow' before it accepts new numbers.
best regards,