my mda is telling usb v1.00 its a duth one from t mobile and i im trying running the noid.exe with the qtek s100 rom dutch ship, but its still checking now for two hours and still cant get it working.
i cant reset it either
somoene please help me with this one
:wink: this trick works for me :wink:
1.get rthe MaUpgradeUt_noID.exe
2.unpack the update to a folder (just unpack the exe with winrar )
3 replace MaUpgradeUt.exe with the noID one (rename it to MaUpgradeUt.exe )and run it while your phone is hooked up trough cable.
this works for me on several occasions :idea:
jazz-007 said:
my mda is telling usb v1.00 its a duth one from t mobile and i im trying running the noid.exe with the qtek s100 rom dutch ship, but its still checking now for two hours and still cant get it working.
i cant reset it either
somoene please help me with this one
Click to expand...
Click to collapse
from one newbie to another:
taken from http://forum.xda-developers.com/viewtopic.php?t=4534
2. Use a clear subject
So you're going to post a message, and need to think of a subject. Try to keep in mind that many people actually use that subject to determine whether they will even look at your message. If you really, really need help, the subject "I REALLY NEED HELP" is the worst possible choice, because many people will not read it. A subject like "I upgraded to 4.00.16 and now I can't downgrade anymore" is much better: it will get the attention of other people that have solved the same problem, and you are much, much more likely to get a reply.
Hi all
I get this message on bootup serial V1.00 now since,
I re flashed the phone it looks like with the wrong file RUU_v1.1_OrangeUK_v3.66.1.230_ship
What are the steps to get the phone working again.
Please be easy with as I am very new to mobile pc's hence this this massive mistake. I have searched for 5 1/2 hours & are just getting totally lost.
I noted the Windows ver which was on the SPV which was 4.21.
I am getting confused with all the different versions like radio software etc.
Any help would be apprieciated.
Further to that I have found out it is a HTC Magician
Thanks in advance
Get the correct rom for your phone, place your phone in the cradle and start the flashing procedure.
Silly question but how do I find out which ROM it is as I have looked here for the ROM ftp://ftp.xda-developers.com/Magician/Shipped_ROMS/ & they are sooo many of them?
Or is it this one UK_11200_131_11210_ship.exe as I am in the UK how can you determin if it is with Orange?
Regards
CC
that'll serve you right for messing with something you shouldn't have - and now Orange won't touch you with a 20ft bargepole because your warranty is worth nothing now :]
Hi,
I just got my first smartphone a while ago.. It's an O2 XDA (Qtek3130).
I have a bluetooth headset and I want to use it to listen to music to with the phone.. I downloaded tornado_a2dp.zip but when I want to install the .cab file it tells me that the file connot be installed because it does not have sufficent system permission.. Now I think is has a lot 2 do with the rom.. As I read that I have to update it... But the problem is:
1) I don't know how to install a new rom..
2)I don't know where to get the right one..
Ah ja one more question when i install a new rom are all the O2 features gone from my phone or what will be changed... and can I make a backup of the one thats on the phone right now?
I hope some one can help me here...
Thanks guys rxo
Just need to unlock the phone. I think it's called application unlock.
Look at Karhoe's sticky thread at the top of the forum. Follow the directions and don't take the step to flash binfs, it's unlocked. Keep going to flash a new ROM.
Hello ....
after a year of not hard resetting my prophet and its really slow now taking about 6-8 mins to boot each time probably lotsa junk inside so i've decided whether to upgrade or just a hard reset and reinstall everything.
after looking at few threads Prophet Tools: Simplify Flashing--V2.8.3 now up! and NEW FLASHING TOOL? and WM6.1/HARDspl ~~ Safe and Save your time *READ BEFORE ASK* ^.^ im convinced it's a could do thing to upgrade it to WM6 so gave it a try.
Endup totally frustrated after trying it for 6 hours looking for answers.
Im using a rom 2.15.13.27 WWE and i am trying to install one of those 'clean roms' ? and im trying [new] WM6.1 Korand WWE 3.1 (based on official rom) .
So i followed the Flashing tool guide but got stucked just after the first step
1. copy the 3 files from the jumpspl.zip (attached at the bottom of this post )to the
ROOT directory of your Prophet ( NOT NOT NOT inside the windows folder,)
The white screen appeared and so i plug in the usb but active sync never get connected. and so i still try clicking romupdateutility and error 208,260 and all sorts of error code appeared....
Also tried the New Flashing tool with no success.
Hope to see some advice the first thing after wake up tomorrow.
Thanx for reading and desperate for answers....
look at :
http://forum.xda-developers.com/showthread.php?t=377545
everything there, from hard SPL, changing Radio version, flashing method, and more...
Hello everybody. I'm completely noob, so please have a little patience with me. I have a Treo 750 in italian, and my final goal is to flash it to wm6-english. But for start, i don't know what Treo i have. I read about Cingular, At&t, etc...
mine sais TREO750-1.16-H3I, h-ware version A, firmware version 1.27.0b.00.
So whom am i talking to every day? Is there a special version of wm6 for my phone?
I thought i'l start from here. Any help would be appreciated...
Ok... noone? At least tell me how I can figure if my phone is unlocked or unbrenched...
Or could someone point me to a tutorial-thread of flashing the phone... from the beginning to the end.
http://wiki.xda-developers.com/index.php?pagename=HTC_Cheetah_WM6
Maybe you'll find something around here for the beginning, ...
Stupi ... it doesn't matter which Treo you have when it comes to flashing ROMs.
Just do the HardSPL first. That way you can pick the English language ROM of your choice to flash and it will work. You also get the benefit of unlocking the phone so it can be used on any GSM network.
Ideally, you'd be best to pick an English ROM provided by the same company that provides your cellular service, but it is not required. If you pick one from another cell company (or a hacked one) then you might have to enter your network settings manually, but that's the only difficult part.
Plenty of resources in this forum. Do some searching and you'll find everything you need. Good luck!
One question, thought... i could'n find the answer on the forum. I downloaded the unlocher, but it sais it only works with spl 1.11, at least... Mine is 0.22.
I tried then to update with RUU_Hermes_QTEK_WWE_2.11.255.1_102_6275_1.38.00.10_108_Ship.exe, but in the "current information about your pda phone" it didn' recognize my pda. I got affraid of bricking it.
So, it seems to me my first problem is updating the spl from 0.22 to 1.11. But I cannot find the software to do this..
Come on men, this has to be simple. I need some help here, please. I'm stuck up with wm5 over a week now...
so, the first thimg I must do, a hard-spl, that's what I understood. This can be done with ceetah_unlocker.
Ok, i launch the application, and it sais it can't start only with 1.11 spl. Mine is 0.22.0000
So the first thing i have to do is update this 0.22 spl to 1.11. Am I right?
But how?
Find one of the WM6.0 desktop updaters and try installing that. They don't require a HardSPL first.
Use one of the following:
AT&T English: Treo750_2_25_ATT_EN_DesktopUpdater.zip
Rest of World English: Treo750_2_23_ROW_EN_DesktopUpdater.zip
Three Australia: Treo750_2_19_H3E_DesktopUpdater.zip
Vodaphone UK English: Treo750_2_18_VFU_DesktopUpdater.zip
I don't have any links as they aren't hosted by Palm anymore. You should be able to find them by looking around the XDA Forum, or by searching the net and/or torrent sites for the filenames above.
thanks a lot, man, but I lost my pathience and i run the cheetah_unlocker... and I didn't brick it. So, now I'm ready for the next step...
please, if anyone pm me with a win 6...
ok, my spl is ok (1.4), i put the CHEEIMG.nbh on my sd card, and I run the step 1 of cheetah unlocker. And nothing happens.. still boots with wm5. I even did a hard reset.
Man, i'm goig crazy... what am i missing?
Please, someone could upload again one of those 4 files? I could find neither of them with goolge.
So, i found the updater, but it won't update my phone since it's in italian...
guess I'll need to do it the hard way. Please, can someone point me a post or a tutorial to update from 5.0 to 6?
stupi said:
So, i found the updater, but it won't update my phone since it's in italian...
guess I'll need to do it the hard way. Please, can someone point me a post or a tutorial to update from 5.0 to 6?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=335661
http://forum.xda-developers.com/showthread.php?t=511763
I must be missing something. I made those steps, all went ok. But how the heck do i change the windows version? That's my goal, not to flash the spl.
I got a win 6 image (i hope, at least), copied the CHEEIMG.nbh file on the card (which is fat 32), and i repeated step one from cheetah-unlocker. As I hoped that after flashing the new windows would automatically install. But nothing happened, the old win was up and running.
Come on man, I'm not such a bad person after all to deserve this... I may have killed a few birds or cats in my childhood, but this is too much... you're killing me.. I'm stuck in this spagetti windows, and I can't upgrade to a normal english windows... what the heck am i missing?
well, if you haven't gotten it sorted by now, hope this helps: once you've hard spl'd, put the new image that you want to flash in the root on your card [<2gb, fat32 formatted] and then hold media and push reset. your phone will cycle into the bootloader [rgb screen], detect the image and ask if you want to flash.