Guys i am an ex-sx56 user moved off to treo (600 and then 650) and am back to the wizard... I had a phone dialer tool "TAKEPHONE" in the palm world that I used to use and was very handy for phone dialing.
I had a rue setup if there is any number starting with +44 it used to use one calling card and dial the 1800# and with for me to click another button then dial the Pin and the automatically dial the number. That way I never had to change my contacts so that when i am here in the US i use the calling card and when in am there un UK i disable calling card and all the numbers are workable and no updates needed...
I am missing this utility as I travel a lot and dial international a lot… I have looked and have not found any decent tool to do the same.
I looked at the long distance dialer but did not work well with WM5.
I am willing to write some tool if I can get some tapi API in MS.net I have written a utility to make the call now I need to get it to check the state of the line and dial extra digits which I cant figure out
In WM5 I managed to partially solve the problem where I create a new contact with 1800XXXXXXXppYYYY where x is the calling card # and Y is the pin after doing this my calling card service is looking for the actual # it also allows me to fins a number but when I click it it dials another call instead of keying in the digits on the first call….
Not sure if I am expressing this clear but I need help.
I will pay for this kind of app.
I am using long distance dialer , it works ok on my HTC wizard
but I would like to have the one you talking about
I have a problem after upgrading to wm5 3.00. When I receive a call my phone always picks the address from the sim card instead of the address book on my qtek. I ave tried with another radio rom, but with no result. If a phone number is on the SIM card, it will first go to the sim card. Anyone with a solution?
Hey Guys, I'd really appreciate if someone can help me out with this situation.
I had wm5 and voice command, used Hidesim cab to hide contacts on sim and when i used voice command it didn't showed any contacts from SIM before. Now i installed Crossbow Reloaded 1.7 and i use HideSIm.cab and using voice command it says that it found two contacts. example. Call Bob on voice command says two phone #s found call this bob if you say no it reads it off sim. In WM5 it never use to read contacts of sim. So if someone can tell me a way so voice commander don't read contacts of SIM it would be great. My Contacts only shows Contacts from Phone not SIM.
Guess all hate voice command by microsoft. eh...
Voice command replacement
nycelitemaster said:
Guess all hate voice command by microsoft. eh...
Click to expand...
Click to collapse
So what are my options where I do not have to record for each contact?
backup your sim on to your computer and then erase it off your sim-card.
nycelitemaster said:
Hey Guys, I'd really appreciate if someone can help me out with this situation.
I had wm5 and voice command, used Hidesim cab to hide contacts on sim and when i used voice command it didn't showed any contacts from SIM before. Now i installed Crossbow Reloaded 1.7 and i use HideSIm.cab and using voice command it says that it found two contacts. example. Call Bob on voice command says two phone #s found call this bob if you say no it reads it off sim. In WM5 it never use to read contacts of sim. So if someone can tell me a way so voice commander don't read contacts of SIM it would be great. My Contacts only shows Contacts from Phone not SIM.
Click to expand...
Click to collapse
I just tried to duplicate this and got the following...
When I said, "Call Joe Smith" and that person is on both sim card and contacts it will say, "Showing two (or more) found, call this Joe Smith?"
If I said no, it then put me into contacts and asked, "call Joe Smith at home or mobile?" So this is not a impossible situation but definitely a pain in the ass.
However, you are right, this is definitely something weird with WM6. I just never noticed it before. I actually occasionally switch phones so deleting #;s off the SIM really isn't an option for me.
Let's see what the real geniuses can figure out.
Hide SIM contacts from Voice Command?
dcdivenut said:
I just tried to duplicate this and got the following...
When I said, "Call Joe Smith" and that person is on both sim card and contacts it will say, "Showing two (or more) found, call this Joe Smith?"
If I said no, it then put me into contacts and asked, "call Joe Smith at home or mobile?" So this is not a impossible situation but definitely a pain in the ass.
However, you are right, this is definitely something weird with WM6. I just never noticed it before. I actually occasionally switch phones so deleting #;s off the SIM really isn't an option for me.
Let's see what the real geniuses can figure out.
Click to expand...
Click to collapse
I am having this same problem on AT&T Tilt. SIM contacts are hidden, don't show in Contacts, but when I say "Call xxx", Voice Command says "Showing 2 Found" (says it so quickly that it took me dozens of listens to figure out what was being said - sounded like "Shelly2Fawn" or some other language when I first heard it.
I know I can delete all contacts on SIM and this issue will go away, but I'd like to have contacts on SIM, because I have a cheap backup phone that I want to be able to use PRN, e.g. go to beach, or in adverse weather situation.
Hi there,
i've been searching for hours now but couldn't find anything working.
Usually I make phone calls from my mobile by calling my home number (which is free for me) and then being connected by my voip router, similar to using a calling card. In my Alcatel phone there is an option to use a general prefix where I enter the home number, a pause sign and the pin code. If that option is activated I simply use the phone book on the sim card and the prefix is used automatically. So I can activate or deactivate the calling card option whenever I want to.
Of course I want to have something similar on my MDA but all I could find were apps that either don't install/work on WM2003SE (Sunnysoft Callingcard, CCDialer, EZDial) or do not what I want them to (Mobidial).
Maybe somebody knows a solution?
Thanx in advance,
Harry
PS: I've got the most recent T-Mobile Big_Storage ROM installed.
I have a Wizard with WM5 and a while back I somehow assigned a voice speed dial tag to a number on my SIM card. Most of my #s are on my SIM card.
However, when trying to add tags now, it seems as if I can only add them to contacts on the phone itself.
Assistance please?
switch of ur sell and tech of sim then put on again on and try to speed dial