Database Info

Problem with awizard. Please help my device is DEAD

how can I use awizard if I cant turn on my device?
I can only get to Bootloader and when I try to press U in awizard I get a popup window saying my device is not connected.
when I confirm this popup (twice) the dos window state that it is initializing and says not to remove my device from the USB and it get stuck for at least 20 minutes
I cant turn on my device so Im trying to flash some other ROMs (like imate's) but cant do that because of ID issues.
What can I do? I am fraustrated, please help, my device is dead.
Thanks

Hi,
If you device is stuck on bootloader, then you should update it with a no vendor ID rom like the one there are on the FTP ftp://xda:[email protected]/ /Prophet/Shipped_Complete_Updates/
section.
The Dopod one come with no vendor ID, but if you do so, you won't be able to change rom later.
If you have another rom you would like to use, then you should download the file ROMUpdateUtility-NoVendorID.zip in /Prophet/Tools/.
Connect your phone on usb when stuck on bootloader, extract the files of your Update Utilies (RUU ...) and change the executable with the no vendor one. You may have to copy the nbf (or something) file into the same directory as the executable.
Launch it and see if it works.
if it doesn't work then download the no vendir ID dopod rom and run the RUU, it will work but as I said, no turning back for now.
good luck :wink:

Thank you for your answer.
I have tried using this ROMUpdateUtility and it started flashing the rom, but when it got to 95% it said:
Error [326]: INVALID COMMAND
This NBF file cannot be used for your PDA phone. Please check your NBF file.

HELP
anything im trying to do, I still get this black screen with version numbers.
What is wrong?
It not that I have played with the device, it just happened. since then I am trying to flash different ROMs with no success.
Please HELP.

I guess your prophet IPL and SPL is 2.15.xxxx
If yes, the only rom you can is Dopod newest rom.

Please, please, please, please help me.
I have HTC charmer and unfortunately put an dopod latest rom in it & now I am stuck in bootloader mode.
Please tell me & help me as I tried many roms but with no success.
I want to revert back to MDA Compact II rom.
Please Help.
SPL is 2.15

NO WM6 release working on my Qtek S200, Aserg WM5 3.13 works fine

I think I have always followed the steps right, but still no succes in booting into WM6. After the hardreset it always stops on the splash screen showing the versions.
I have tried all the versions found here at xda-developers.
It is strange but when I try the ASERG 3.3.13 ROM everything is OK. I am able to boot correctly.
What could be wrong? Is it something with the SPL?
Is there a possibility to debug the boot process?
I have following versions:
IPL 2.09
SPL 2.20.0000
GSM 2.47.21
The device is CID unlocked.
Thanks for every advice.

PiGeonCZ,
Try this:
When doing flashes, usb connect using Active Sync v.4.5, connect as "guest" to sync. Windows XP only. Reboot computer once before starting.
First, very important, flash to the last official wm5 vendor rom of choice. The last I-mate, HTC/QTEK rom is fine. If you're CID unlocked & SIM unlocked, you can use any rom.
For upgrade step 1, download & use this temp rom (PDAviet Temp) to get to first:
http://forum.xda-developers.com/showthread.php?t=308266
Remember, use no other NVID rom out there for this step 1.
Upgrade Step 2: Use this rom for wm6 upgrade: Trueneytral 1.4 with MS Bluetooth stack
http://forum.xda-developers.com/showthread.php?t=302067
If this doesn't work, please let me know.

Hi DevilDuck, thanks for the reply, but no luck again.
This time with device of another my friend, also CID ulnlocked and with the same versions of IPL and SPL.
I am using WinXPSP2 ActiveSync 4.5.0
I did it in following order.
1. update RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe - succesfull
2. tab to see the align screen
3. update Prophet_PDAViet_Step1 - succesfull
4. tab to see the align screen
5. write Prophet_WM6_17913_TrueNeytral_1_4MS - succesfull
6. hardreset
7. stuck on the second splash screen again
So I have tried to write the AKU3.3.13.ASERG-us on this device too and yes it booted succesfully.
I think I have tried all possible combinations and ROMS already, but no luck with WM6.
Any idea?
thanks

Same issue
I have the same issue. I tried all available WM6 ROMs. No success. Please help!

is there a tutorial on how to upgrade to WM6?

guide here: http://forum.xda-developers.com/showthread.php?t=310452
on the second splash screen WAIT 1-2 maybe 3 minutes....

HELP I'M NEW and my qtek dont restart

hello i'm new in the forum and new a«in pda.
i have been reading for allover the forum about updating the pda...
so, i tried to update my prophet g3 with the ProphetTouchIX doing what the old updatinh guide said.
everything was ok i installed the RUU_Prophet_220734_2207114_024721_NVID and update my pda and then i executed the update_rom.bat from ProphetTouchIX and a message appers in the pda "sucesse" and the cmd window in the pc after a wile says that its done and etc...i did the hard reset and th pda stucks in the blu image with qtek on it.
any help??
thanks
i've done it i installed the Fantastic_b4 rom and its ok...
now if i want to change the rom i have to do everything again?or can i just download the rom and run the romudater.exe from step1 and 2?
thanks

Do You have Problem downgrade fr ROM 2.03 TX WWE

Hi all,
I'm Indonesian. My Device is XDA II Mini. A few weeks ago I have upgrade the ROM to 2.03 TX WWE, used it for about week. A problem appear when I tried to downgrade the ROM to the original one from seeo2.com site the PC tell the error 150 (I think its about the connection).
when I read this forum, i know the many people have the same problem with me.. and still not found yet the solution for solving this problem.
With this situation I made this new thread to share our problem in this thread. Its about the history from ROM 2.03 TX WWE, about the maker of this ROM and for the warning massage for anyone who wish to write this ROM to their device so they will think 100 times to use this ROM.
Lets join this thread and hope there be a nice guy who can solve our problem.
regards
Eric
Jakarta-Indonesia

Hello,
I have the same problem with my magician. I flashed so many times some ROMs on my Magician before without any problems. But since I flashed the 2.03TX ROM, there is no way to flash any ROM. I also can't reflash the 2.03TX ROM. It always says, that there is an Connection Error.
I tried to flash with the official Setup and also with the No_ID.exe, but there is no chance to do something.
The 2.03TX is a very nice Rom, but i want to use the programm "Phone Extender" on my Magician and it doesen't run with 2.03TX...
Please help us someone, I want an other Rom on my Magician!

Where is everybody.....
Please Help us hiek hiek hiek.... cry cry cry....
Does anyone can help us ?????
Pleeeeaaaaseeee......

The same problem, the 2.03TX WWE is a nightmare for me.

I haven't got any problem.
Flashed just last week tx203->TMobile112->wm61.
Very happy with everything, I am using XP and O2 mini

you should flash from bootloader.

I have problem after try flash wm6 from 2.03 TX WWE phone only boot mode ... any help .. I try to flash same rom but I give same error on country id

I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...

to bootloader mode mean screen with serial or usb status ... my problem is I try more rom but any flash I don't have original rom ... what I do?

hello im from Indonesia too...
You can use magicianUpdt_NoID (or another name, i forgot)
you can search at xda-developers ftp..

I have no problem with mine.
When I flashed this ROM it got automatically flashed twice.. I don’t know what happen but it was successful

Hello
I was sucessfull.
There is a 2 step flash!!!
P-O

I try to use this too but nothing no flash ....

Try this rom: http://rapidshare.com/files/18876133/NL_11300_131_11200.exe
If this doesn't work tell me the error message...

ok this img of error the image 1 when start exe the other when stat update noid

jovan.asanin said:
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
Click to expand...
Click to collapse
Mine keeps reseting everytime it should go into the bootloader screen.
I can force it, but then the update wont continue anymore.
How did you do it?
---Edit---
Nevermind, found the solution here, its the old vista driver bug... :/
http://forum.xda-developers.com/showthread.php?t=291723

I use xp ...

well... it worked on mine...
Try the driver thingy anyway and follow the instructions to the letter.

I try more and more but notuhing

Here's what I did step-by-step:
- Recharge the battery to at least 70% in a electric charger (not connected to the PC).
- Go into bootloader (press the power button +camera button without releasing and click the tiny little hole on the right bottom side of the device, next to the audio entrance).
- The screen goes black, that's normal, with the help of a bright light you can see its written on the screen "SERIAL" and "V1.02" (or something similar).
- Go into Active Sync on XP (or Windows Mobile Device Center on Vista) and uncheck the option "Allow USB Connections".
- Connect your pocket pc to the PC usb (its still in the bootloader screen, right?).
On Vista (I think XP can skip this step)--------------->
- Go to Control Panel > Administrative tools > Services and start the services "windows mobile device connectivity" and "windows mobile device 2003 connectivity", its they are already running thats ok.
- Now go to Control Panel > System > Device manager, find your mobile device and force the update of the driver attached here.
- Now, press Ctrl+Shift+Esc for Taskmanager and kill "WMDC.exe".
------------------------------------------------------------------->
- Download this rom (46mb): http://rapidshare.com/files/18876133/NL_11300_131_11200.exe (its in english WWE)...
- With Winrar, extract that EXE into a folder.
- Copy the MaUpgradeUt_noID.exe attached here into that folder, with the rest of the files.
- Run MaUpgradeUt_noID.exe.
- If all goes well the update will take a loooong time and pass thru three install bars, that's normal.
- After that it recommends a Hard-reset (Power button + reset at the same time).
Now your rom is official, and you should have no more problems.
Install the Cotulla WM6.1 rom: http://forum.xda-developers.com/showthread.php?t=492937
Based on: http://forum.xda-developers.com/showthread.php?t=291723

Stuck en bootloader

Maybe its in a forum,but I have looked everywere.I just sold my S200
(i bought a HD) and the S200 died...... It is in the bootloader and I have tried everything.
1. Pressing all buttons = Format failed
2. Spl can be loaded again, but no with a exe.
3.All roms can be instaled (but not al exe). If a rom installed 1
file (exe) it doest not work. I installed al least 20 rom (wm5,wm6 ect...)
All can be installed and at the end you get 100 % and finished......
I opened the S200 and the button on/of seems to be ok.
4. In the bootloader sceen I get :
IPL2.09.001
SPL 2.G4.4PDA
I am desperared because I am fixing it since a few weeks with....no result.
PLEASE, I NEED SOME HELP
(PD I am from Belgium and living in Spain)

Please need some help ( a lot)

beastmichel said:
Maybe its in a forum,but I have looked everywere.I just sold my S200
(i bought a HD) and the S200 died...... It is in the bootloader and I have tried everything.
1. Pressing all buttons = Format failed
2. Spl can be loaded again, but no with a exe.
3.All roms can be instaled (but not al exe). If a rom installed 1
file (exe) it doest not work. I installed al least 20 rom (wm5,wm6 ect...)
All can be installed and at the end you get 100 % and finished......
I opened the S200 and the button on/of seems to be ok.
4. In the bootloader sceen I get :
IPL2.09.001
SPL 2.G4.4PDA
I am desperared because I am fixing it since a few weeks with....no result.
PLEASE, I NEED SOME HELP
(PD I am from Belgium and living in Spain)
Click to expand...
Click to collapse
Try to flash the NVID from Here http://forum.xda-developers.com/showthread.php?t=353547,
if your Prophet works fine after that, you may flash any rom you like ,
...try to read my thread and....Good luck and

Dear Dioxda2.
Thanks for your comments but I think that I do not understand it all.
My S200 is in the bootlader and I did the following (your manual) :
The pda goes automaticly in the bootloader when on, with the USB words
in the screen :
1.When I try to to inslall a spl , it stays in a green screen with ipl and spl data.Nothing can be installed until baterie is removed
2. Tried to install the NVID but stops ant 80 % with error 326.
3. Tried to install Lazy tool : I put the nbf file in the lib file and install the rom
100 % and I reboot in the bootscreen (fustrating)
4. Tried to insall WM5 and the same like the lazy tool instalation.
Never activesync is connect.That why (I think) that somo roms can not be installed, like a wm5 only os.
Any sugestion ??

beastmichel said:
Dear Dioxda2.
Thanks for your comments but I think that I do not understand it all.
My S200 is in the bootlader and I did the following (your manual) :
The pda goes automaticly in the bootloader when on, with the USB words
in the screen :
1.When I try to to inslall a spl , it stays in a green screen with ipl and spl data.Nothing can be installed until baterie is removed
2. Tried to install the NVID but stops ant 80 % with error 326.
3. Tried to install Lazy tool : I put the nbf file in the lib file and install the rom
100 % and I reboot in the bootscreen (fustrating)
4. Tried to insall WM5 and the same like the lazy tool instalation.
Never activesync is connect.That why (I think) that somo roms can not be installed, like a wm5 only os.
Any sugestion ??
Click to expand...
Click to collapse
1. you may safe your prophet ONLY if you successfully flash the NVID, (just don't look at the connection status between PC and Prophet, as it was forced to bootloader mode, just run the NVID and flash dtraight until it ends, be awared that, NVID needs time to flash, sometimes needs more than 5 minutes, so ... wait for it ! )
2. I hope you can make it or you need to bring your prophet to factory due to abnormal flashing (wrong flashing)...
Good luck
PS.
[size=+3]Lazytool......[/size]
you should place your favourite XXX.nbf file next to the "LazyTool-Start.cmd" or "upgrade.cmd", but [size=+3]NOT[/size] in the LIB folder.... +_+
+_+ +_+ +_+ +_+

too bad (
Dear dioxda2..
i think this is the same problem as my S200 (
mine wasnt on the software prob but hardware...
to: Threadstarter )
try bringing your Mobile to any qualified technician near your place.. something might have been wrong inside... like mine its the comm and cam buttons that are grounded thats why its always in bootloader.. no matter what software i flash its still the same...
hope this helps
Mark

Dear Marekplph,
Can you explain me what do you mean with grounded. Do you mean a
short circuit (negative). Is it dificult and expensive to fix ?
Thanks,very helpfull

dioxda2 said:
Try to flash the NVID from Here http://forum.xda-developers.com/showthread.php?t=353547,
if your Prophet works fine after that, you may flash any rom you like ,
...try to read my thread and....Good luck and
Click to expand...
Click to collapse
I have tried pretty much all the Lazu Guides and prohpet tools.
Most of the time I get the Invalid update tool error.
Maybe the person in this thread has the same problem I have.
I have a G3 Prophet (Qtek S200), that has been flashed with a G4 Rom.
Not it is stuck in tri-color screen and nothing seems to help.
the prohpet tools I downloaded gives me errors and there is little documentation of where to put rom files etc. Maybe you know?

noonas said:
I have tried pretty much all the Lazu Guides and prohpet tools.
Most of the time I get the Invalid update tool error.
Maybe the person in this thread has the same problem I have.
I have a G3 Prophet (Qtek S200), that has been flashed with a G4 Rom.
Not it is stuck in tri-color screen and nothing seems to help.
the prohpet tools I downloaded gives me errors and there is little documentation of where to put rom files etc. Maybe you know?
Click to expand...
Click to collapse
if you want to make a fast move, bring it to the factory....
mess up upgrade code (G3 and G4) ... sorry... doomed.

back again
yes in my country its cheap.. coz something inside short circuited and that keeps my camera button pressed and taking pictures of his own < scary > if you cant fix this try to visit an authorized technician that can fix this for you...

ok, will send the s200 to the SAT (repair). I don´t have other options.