Database Info

Missing Calls after Mobile 6 Upgrade

Hello everyone,
Since I upgraded my ROM to Mobile 6, I have been missing a lot of calls. A lot of the time the phone does not ring and even if a voicemail is left, unless the phone rang, I am not notified of the voicemail. It’s getting a bit annoying now since I am missing about 40% of my calls. Has anyone else run into this issue and if so, do you know the fix? Any advice would be greatly appreciated.
Thanks

risingeagle said:
Hello everyone,
Since I upgraded my ROM to Mobile 6, I have been missing a lot of calls. A lot of the time the phone does not ring and even if a voicemail is left, unless the phone rang, I am not notified of the voicemail. It’s getting a bit annoying now since I am missing about 40% of my calls. Has anyone else run into this issue and if so, do you know the fix? Any advice would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
How much did you read up on WM6 before you upgraded to it? It's a known issue that alot of people have had to go back to 2.19 radio rom due to missed calls or apply the mrfrazzz radio rom fix (which is in the 1st message of the thread in my signature)

http://forum.xda-developers.com/showthread.php?t=312834
is the post about all our trials and tribulations with WM6 and Cingular (AT&T)
the last couple pages seem to have hit on a common issue. the ROM version

When in doubt go with the 2.19.11 UK Radio rom. If you use anybody other than Cingular the Cab fix likely won't work. I tried it with the change in the value that supposably worked for T-Mobile but it caused me to not be able to get connected at all. So it's really trial and error. Just try all the radio versions till you find one that works for you. Only reason im not using 2.19 is that in my area 2.40 works flawlessly and gives me better signal at work.
Shane

Hallis said:
When in doubt go with the 2.19.11 UK Radio rom. If you use anybody other than Cingular the Cab fix likely won't work. I tried it with the change in the value that supposably worked for T-Mobile but it caused me to not be able to get connected at all. So it's really trial and error. Just try all the radio versions till you find one that works for you. Only reason im not using 2.19 is that in my area 2.40 works flawlessly and gives me better signal at work.
Shane
Click to expand...
Click to collapse
Well I'm on Tmobile and the mrfrazzz fix corrected the issues I was having...

Slightly odd behavior since WM6 upgrade

Hi all
Upgraded to WM6 on my O2 XDA IQ. No problems with install all went great. SInce then though a few people have sent texts that I have not got. It seems to work some of the time. It isn't a particular network or person as I get some from one person then another day I don't get them.
Plus it keeps making the dinging noise (the one it makes on boot up) all by itself. It plays randomly at different intervals, 10 times in a minute some times and then it can go for hours without playing. Any ideas?
Thanks in advance!!

It generates this sound at boot up proces when there is a connection problem of wi-fi module. I solved it by changing in the wlan-ip manager th device

Weird. I mean not getting messages shouldn't be a problem in the phone, right? If you get one, you should be getting them all...

bipinsen said:
Weird. I mean not getting messages shouldn't be a problem in the phone, right? If you get one, you should be getting them all...
Click to expand...
Click to collapse
That is what i thought, so I rang O2 and they said must be a phone problem which to be honest i thought that was total BS!
Got rid of the dinging noise thanks to makler1981. The wifi was turning itself on when the phone was switched on. Still not sure why it turns itself on but i now know how to stop the bloody noise!
Cheers!

You need to do this modifications in you system registry [HKEY_LOCAL_MACHINE\Comm\TIACXWLN1\Parms]
find there
"HTCDefaultOff"=dword:00000000
change it to
"HTCDefaultOff"=dword:00000001

makler1981 said:
You need to do this modifications in you system registry [HKEY_LOCAL_MACHINE\Comm\TIACXWLN1\Parms]
find there
"HTCDefaultOff"=dword:00000000
change it to
"HTCDefaultOff"=dword:00000001
Click to expand...
Click to collapse
It was already set to 1. Strange eh? Thanks for the suggestion.... got any more?

I had problems with delayed SMS after a WM6 upgrade as well. More so the ones I sent weren't arriving until hours later, or sometimes not at all.
I do wonder if this maybe was a radio problem, as there are different versions of the radio ROM. See if yours is the most recent (ending in .14 I think).

kentchristopher said:
I had problems with delayed SMS after a WM6 upgrade as well. More so the ones I sent weren't arriving until hours later, or sometimes not at all.
I do wonder if this maybe was a radio problem, as there are different versions of the radio ROM. See if yours is the most recent (ending in .14 I think).
Click to expand...
Click to collapse
My radio version is 4.1.13.28_02.61.01
Where can i get the latest version?
Thanks

tonyyeb said:
My radio version is 4.1.13.28_02.61.01
Where can i get the latest version?
Thanks
Click to expand...
Click to collapse
Looks like the latest version to me. Check out the signature of Nitro for links to the latest radio versions.
Thanks for having this info, Nitro!

Problems with radio 1.65.14.06

I have installed the latest ROM that comes with radio 1.65.14.06, and since then I have the following problems:
1. The phone disconnects a lot of times.
2. The WIFI does not detected WIFI networks as before, and has also problems connecting to WIFI networks.
Did any of you have problems like this, and if so how did he solve them.

Same Problems here. I'm Using the Rom with Nothrills GER V3.
I'll try to update the Radiorom to 1.65.17.10

Toxig said:
Same Problems here. I'm Using the Rom with Nothrills GER V3.
I'll try to update the Radiorom to 1.65.17.10
Click to expand...
Click to collapse
I would not do that if I were you!

Why? Is radio 1.65.17.10 not stable?

amitbsh said:
Why? Is radio 1.65.17.10 not stable?
Click to expand...
Click to collapse
check this out

So is version "Kaiser_Radio-1[1].65.17.10-patched.zip" better, and safe?

amitbsh said:
So is version "Kaiser_Radio-1[1].65.17.10-patched.zip" better, and safe?
Click to expand...
Click to collapse
no, read the full thread or at least the last few pages. from what i can tell, the title is misleading !!

So if the latest radio is not good how can I fix these problems?

amitbsh said:
So if the latest radio is not good how can I fix these problems?
Click to expand...
Click to collapse
try to flash with other wm6.1 radio.

I already tried the .14.06 and got same issues.
So I switched to that one in my signature - no more problems, just great.

1.65.14.06 works flawlessly
I've tried several radio's, this radio is by far the best even after Chinese fonts were installed, by the way, I am using Chinamobile. Make sure go to start-setting-connections-connections setup, to set up your service provide properly. Soft-Reset couple time will also help.

Where can I download only the radio?

I just downloaded radio 1.64.8.21, I will try to install it and let you know

Do not update to 1.65.17.10.
You can't go back to another Rom!
Probably the Cause for netdisconnect is a broken Mainboard.
My Kaiser will be switched 1-2-1 very soon (48 Hours Provider reaction Time)
Switch your Net to GSM and you won't lose Connection anymore.

I am using radio version 1.65.14.06 and have no problems so far (touch wood!). Yes, I also chose not to upgrade to 1.65.17.10 after reading some issues with it (especially that ou cannot revert back).

amitbsh said:
Where can I download only the radio?
Click to expand...
Click to collapse
Kaiser Radio Link in my Sig.
Ta
Dave

Hi, I tried both these and the 1.65.17.10
Both can not be downgraded; and both have issues with connectivity. For me I am in the UAE; I can only make one phone call; the second phone call, there is no sound, and thus I don't hear anyone, and no one can hear me.
Very serious issue, I don't recommend anyone to try it even until there is a fix for this.

1.65.14.06 THE best
It's very unfair that xda has put put an exclusive thread labeling it as problems of 1.65.14.06 Radio.
This is indeed the very best and robust Raido that has ever been produced for Kaiser devices since ancient times.
There are hundreds of reports that this Radio works flawlessly on Kaisers around the world. I recommend that those few who have witnessed issues on their devices, consult with their network operators for correct settings.
Ciao

i use for several weeks this radio (1.65.14.06)with different 6.1 roms and i have no issues at all!!!!
everything works fine bl,wifi,and the battery perfomance is much better than 6.0 radios.
the only issue is that with destinator 6.1 i have to use gps gate to lock gps signal ...
nothing else issue...

pheroah said:
Hi, I tried both these and the 1.65.17.10
Both can not be downgraded; and both have issues with connectivity. For me I am in the UAE; I can only make one phone call; the second phone call, there is no sound, and thus I don't hear anyone, and no one can hear me.
Very serious issue, I don't recommend anyone to try it even until there is a fix for this.
Click to expand...
Click to collapse
this seems to be an isssue with dutty's latest rom with those radios. flash to hyperdragon or pdaviet to verify.

terrible echo during calls

Hi,
I got the XDA Diamond Pro (Touch Pro O2 germany) yesterday.
During a call,the phone generates a terrible, slightly timeshifted echo of the own voice. The voice of the other person is normal and the other person doesnt hear an echo. I have tried it several times with different persons and networks (mobile + landline)...always the same phenomenon...sometimes more or less.
Is this normal with the Touch Pro? Do you also have this echo while making a call?
regards
10mabo
(sorry, my english is probably not the best)

Nobody with the same problem? Are your Touch Pros without echos?

No prob for me. Never heard something similar. What about your signal strength? Do you have good reception?

No problem here aswell.
tried a hard-reset already? I noticed that my TP worked better after I did a hard-reset (more stable and quicker), dunno why though.

Thank you for the replys!
So it seems that my device is not working properly :-(
It´s already on the way back to the provider.
regards

Holy crap! I just got another exchanged fuze and it's having the same issue. I'll try flashing to a new rom and see if that works.

When I first got the phone I noticed that my voice would echo but it stopped happening on its own. I think it was occurring because of bad reception. At that time my phone was having major problems with the data connection also and I figured it had something to do with ATT's towers.

I have experienced this echo, too, but considered it to come from reception problems as it does not happen on a regular basis. I.e. some calls are experiencing this echo, some do not.
CU,
Cactus World

I assume you mean flashing another radio rom, right? I have this issue on my Fuze as well. I flashed to NATF's rom, but am still running the stock radio rom that came with my phone: 1.02.25.32.
Did a different radio rom help you??
Kraize said:
Holy crap! I just got another exchanged fuze and it's having the same issue. I'll try flashing to a new rom and see if that works.
Click to expand...
Click to collapse

I changed my radio to 1.08.25.20, but I still have the echo. Do you think this is a hardware or software issue? Thanks!
sunil23 said:
I assume you mean flashing another radio rom, right? I have this issue on my Fuze as well. I flashed to NATF's rom, but am still running the stock radio rom that came with my phone: 1.02.25.32.
Did a different radio rom help you??
Click to expand...
Click to collapse

I had the same problem I think with mine. It went away after a while when I was using NATF v2.2 but then when I flashed to v2.3 it came back. This was because the incall volume went down. So increase the volume when you're in a call and that should fix it.

I'm not sure if this is the same problem, but the same thing has happened to me with both the Fuze and the Tilt. What I think the issue was though was that there was a slight lag between the time I said something and the time the sound came out of the earpiece on the other phone. The other phone's mic would pickup the sound of my voice and send it back to me. Very annoying. The problem was always solved when the person I was talking to switched to headset.

Same issue
I am experiencing the same issue, but it does seem to come and go depending on the in-call volume settings.
Obviously, no problems on speakerphone, which I use frequently.
___
Stock Radio, Stock Rom, no bloat

I just switched away from NATF v2.3 to aruppenthal's ver2 final ROM and the echo has cleared up! Thought I'd share in case others want to try...

Nobody there...

Hello everyone,
I have the latest AT&T 6.1 ROM, downloaded from the HTC site for the Tilt. Here's a couple of problems that I have, that I can't get search results for.
1. VERY often, when a person calls me and I answer, I can't hear anyone on the other end! The same results when I make an outbound call as well. The device says that I'm connected to the other party, but I can't hear that.
2. When I AM actively connected, VERY often my bluetooth headset will just DECIDE to disconnect! Now, the DEVICE is still connected, but I have to either quickly put it to my ear to not miss what the other party is saying, or, I've noticed that if I push the multifunction button on the earpiece (Jawbone), it will reconnect.
Any help with these two issues would be appreciated. This has ONLY begun since I've installed the newest AT&T 6.1 ROM, which is supposed to be for the Tilt... which I have.
I'm REALLY frustrated...

Maybe try the original 6.0 rom and see if it still happens. If it does, and your phone is under a year, I would definitely send your phone in for warranty.
Jason

i have 3 words for you,
1-radio
2-radio
3-radio..................
try changing your radio and see if the problem persists, but i smell a radio problem behind all of this

maiahsdad said:
Hello everyone,
I have the latest AT&T 6.1 ROM, downloaded from the HTC site for the Tilt. Here's a couple of problems that I have, that I can't get search results for.
1. VERY often, when a person calls me and I answer, I can't hear anyone on the other end! The same results when I make an outbound call as well. The device says that I'm connected to the other party, but I can't hear that.
2. When I AM actively connected, VERY often my bluetooth headset will just DECIDE to disconnect! Now, the DEVICE is still connected, but I have to either quickly put it to my ear to not miss what the other party is saying, or, I've noticed that if I push the multifunction button on the earpiece (Jawbone), it will reconnect.
Any help with these two issues would be appreciated. This has ONLY begun since I've installed the newest AT&T 6.1 ROM, which is supposed to be for the Tilt... which I have.
I'm REALLY frustrated...
Click to expand...
Click to collapse
did you do a hard reset? if not try that and see if that helps

Without a doubt an issue with your radio version. I had the same issues when I switched from WM6 to 6.1 - turned out my radio only worked w/ version 6 and caused my phone to only work half of the time.

SilverVenom said:
Without a doubt an issue with your radio version. I had the same issues when I switched from WM6 to 6.1 - turned out my radio only worked w/ version 6 and caused my phone to only work half of the time.
Click to expand...
Click to collapse
You are Switching from a 6.0 to 6.1...it probably is a radio issue...just go to the ultimate radio thread in my signature and download a 6.1 radio and try it....it will only take a few seconds

the stock wm6.1 at&t rom that he loaded comes with a functional radio made for that rom so unless he flashed a radio that is for wm6 after he updated then yes its the radio

looks like Radio problem.. but if you install the ATT official rom you have allready one for 6.1 windows.. Like already say MSD24200
but try one from here:
http://forum.xda-developers.com/showthread.php?t=393182
i prefer the 1.65.24.36 NIKI Radio
you must select one of 1.65.xx.xx or 1.70.xx.xx

Comm Manager?
b16b said:
looks like Radio problem.. but if you install the ATT official rom you have allready one for 6.1 windows.. Like already say MSD24200
but try one from here:
http://forum.xda-developers.com/showthread.php?t=393182
i prefer the 1.65.24.36 NIKI Radio
you must select one of 1.65.xx.xx or 1.70.xx.xx
Click to expand...
Click to collapse
Bob,
I using the eOS 4.888 ROM on AT&T and I have the "silent call" issue too. It seems to have come up only in the past month or so. I'm on my 4th radio, currently a Polaris 1.59.42.23. The Polaris Radio seems to make the problem less frequent, but it is still there. My first though was this is an AT&T issue but there is a thread in the Kaiser General section about this, and posts in the Ultimate Radio thread that indicate the issue is occurring outside of the AT&T network as well.
The issue has been blamed on radios, ROM, and bluetooth, but in my experience with it, I'm thinking it might be Comm Manager related, but I don't know enough to know how the Comm Manager interacts with the radio/ROM to really be helpful.
I do know that the person who figures out the answer to this problem will make quite a few folks on this board very happy!!
Jim

Same Issue
I am having the same issue. I have the official 6.1 ROM from HTC on the att tilt. I flashed it on a friday and did not notice issues with not hearing the person on the other end when connected until a few days later. I looked at the ultimate radio thread according to that, I have the correct radio for my rom version:
ROM version: 3.57.502.2 WWE
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
Could it still be a radio issue? Or something else?

jpcrailjr said:
Bob,
I using the eOS 4.888 ROM on AT&T and I have the "silent call" issue too. It seems to have come up only in the past month or so. I'm on my 4th radio, currently a Polaris 1.59.42.23. The Polaris Radio seems to make the problem less frequent, but it is still there. My first though was this is an AT&T issue but there is a thread in the Kaiser General section about this, and posts in the Ultimate Radio thread that indicate the issue is occurring outside of the AT&T network as well.
The issue has been blamed on radios, ROM, and bluetooth, but in my experience with it, I'm thinking it might be Comm Manager related, but I don't know enough to know how the Comm Manager interacts with the radio/ROM to really be helpful.
I do know that the person who figures out the answer to this problem will make quite a few folks on this board very happy!!
Jim
Click to expand...
Click to collapse
It is not Comm mgr related as I have tried several to no avail, Also several 6.1 roms and several radios . No luck.
Hopefully a mod can combine this thread with this one http://forum.xda-developers.com/showthread.php?t=438457 so we can all work on this together.

Can't hear other party......
Did anyone find a solution to this yet? I have flashed all the compatable rabios with the tilt running the official wm6.1 from htc. And I am still making and receiving calls with not being able to hear the other party(as well as them not being able to hear me).
The main function of the tilt is a PHONE!

Hard reset after flash maybe?

kaisernewb said:
Did anyone find a solution to this yet? I have flashed all the compatable rabios with the tilt running the official wm6.1 from htc. And I am still making and receiving calls with not being able to hear the other party(as well as them not being able to hear me).
The main function of the tilt is a PHONE!
Click to expand...
Click to collapse
It has to do with 6.1 . We are trying to pool all our information on one thread
http://forum.xda-developers.com/showthread.php?t=438457
Nika has reflashed to a 6.0 rom, and that appears to have eliminated the problem.
Again, if a Mod could merge these threads, we could all work togther on this.
Thanks.

kaisernewb said:
Did anyone find a solution to this yet? I have flashed all the compatable rabios with the tilt running the official wm6.1 from htc. And I am still making and receiving calls with not being able to hear the other party(as well as them not being able to hear me).
The main function of the tilt is a PHONE!
Click to expand...
Click to collapse
If it is not radio, then it is a connection issue with your USB port. I had this happen to me and frustrated the heck out of me until I discovered that the tether that is inside the USB port on the device was loose, as if it was cracked. I must have done that while jabbing the stylus in it without using my glasses to soft reset. I discovered the issue by accident when the phone was plugged to be charged and i received a phone call. every time i wiggled the phone the conversation sound would get muted or interrupted. I ended up returning the Tilt to AT&T as a defective device and got a refurbished one that works. Test it and let us know.