Related
In the interest of trying to update my phone back from WM6 to WM5 I flashed my T-Mobile SDA (US) with the T-Mobile SDA (UK) image. I now can't get it to turn on or anything.
From reading here I think I flashed my Tornado with a Hurricane image. Is that correct? If so, is there any way I can recover my phone? I have tried getting into the bootloader by holding the power, camera, and the communication manager button, but nothing happens. I do occasionally see the left light flash orange for a second at random times. It doesnt seem to light up when I charge it though.
Did I just brick my phone?
http://forum.xda-developers.com/showthread.php?t=294444
The simple answer being - it's dead. Sorry about that. It's a costly mistake.
What's the condition of the housing and keypad? I might be interested to buy it for parts. I got my SDA used a long time ago and the previous owner was a bit too rough with it (basically, it looks like poo).
bipinsen said:
The simple answer being - it's dead. Sorry about that. It's a costly mistake.
Click to expand...
Click to collapse
And a very EASY mistake to make, considering the fact that on the home page of this forum, it has the picture of the Tornado before the HUrricane, yet the tornado forum is listed AFTER the hurricane forum.
I spent many trips here trying to figure out whether the SDA was a tornado or a hurricane. Of course they don't even have SDA is a model type listed there, which is even just as stupid.
Sorry, but this is just inviting people into catastrophy, and it really sucks bad. In fact it's quite fair to say if this were not the case, there would be many less bricked SDA's (Also known as Tornado, but apparently the SDA is not a recognized model here).
See attached image that almost cause me to brick my SDA
Tell me that is not confusing?
Flashing the US SDA with a UK SDA ROM is a common mistake. I know, I did it too, bricking my first Tornado 2 days after buying it! My advice; sell it for spare parts and get another one from ebay. I'm really sorry, my friend, but there's nothing you can do for your phone now.
And please do not advice him about JTAG flashing, etc. Theoretically, it is possible, practically no one in this forum had it done! No one knows how to do it!
elsmacko said:
And a very EASY mistake to make, considering the fact that on the home page of this forum, it has the picture of the Tornado before the HUrricane, yet the tornado forum is listed AFTER the hurricane forum.
I spent many trips here trying to figure out whether the SDA was a tornado or a hurricane. Of course they don't even have SDA is a model type listed there, which is even just as stupid.
Sorry, but this is just inviting people into catastrophy, and it really sucks bad. In fact it's quite fair to say if this were not the case, there would be many less bricked SDA's (Also known as Tornado, but apparently the SDA is not a recognized model here).
Click to expand...
Click to collapse
You're wrong, those pictures are correct. I realy hate this modern attitude that when people mess up they just blame someone else for it. Yes, getting throught the naming jungle aint easy at times but still, there's no reason to blame personal mistakes on the forum. People who flash need to be aware that it's always a risky thing to do unless one knows exactly what one's about to do. So people need to invest time and learn all the details about a) their exact device and b) how flashing works. It's called personal responsibility.
Hello!
Will very much appreciate some help with my kaiser!
I've downloaded a program from ebay to unlock the phone, the first program was the flash Hard-SPL program. This guy has included all the flashing programs (radio etc.) onto one program to make it easier, but before you run hardSPL a message comes up saying:
"Your device will now be flashed, follow the instructions, when the loading bar appears on the PC, pay attention to your device as soon as you see the three colour screen you must REPLUG usb, do so immediately then WAIT PATIENTLY for it to flash"
Now i took "replug" to mean unplug then plug in again... which is odd because the hardSPL program doesnt ask you too. SO as soon as i saw the hardSPL loading bar at 0% i unplugged and replugged the USB. Then my heart sank as a communication error inevitably came up and i had to exit the program.
Now my phone is stuck on the three colour screen (with white bit at the bottom) with the current text displayed on the top left:
KAIS130
SPL-1.93.Jump
CPLD-8
then obviously "USB" at the bottom.
I've tried resetting the phone but the button wont work, i dont want to take the battery out incase i'll completely brick it!
PLEASE HELP!!!!!! ($30 donation for the most helpful reply! - i know its not alot but better than nowt!)
A simple search for hardspl or the likes will result in the results you're looking for. You may also want to read the kaiser sticky (the very first post) as it may become helpful.
try downloading the HardSPL from this site and running the file as per the instructions. May still be able to recover. Good luck m8!
I had this problem way back when I got my Kaiser. I simply reflashed HardSPL and then flashed Duttys ROm. All fixed after that
money is not everything...
downnload the HardSPL package from my signature. unplug and replug your usb cable from you computer. then run the hardspl with the attatchede exe from the download.
if need be you can reach me via msn messeger [email protected]
OK i've been good and searched the forums, and found its OK to take battery out and put back in... it started no probs *phew*, although now i'm very scared to flash!!!! will post my progress...
beeringo said:
OK i've been good and searched the forums, and found its OK to take battery out and put back in... it started no probs *phew*, although now i'm very scared to flash!!!! will post my progress...
Click to expand...
Click to collapse
As long as you HardSPL first there is absolutely NO risk. Been tested to death, works a treat. Good luck m8!
Follow instructions in this post, should keep you ok. http://forum.xda-developers.com/showthread.php?t=334678
***changed the link, put the wrong one in, sorry!!! ***
we here at xda don't do stuff for money .. donations r appreciated. the most important aspect of the site is to help u learn and understand the workings of ur device. since u r new to rom flashing/device upgrading i highly recommen and suggest it as a requirement to read the first sticky under the kaiser rom devvelopment forum.
as far as hardspl goes im sorry if u paid one ebay to some scammer as full hardspl including instructions on how to use it r available free of charge here on xda thanks to olipro,pof, and jocky and others.
if u still r stuck than i suggest u ask alltheway for help
Hmmm... tried flashing hardSPL and it turns out it makes no difference i took the cable out the program doesnt work! Comes up with a connection error anyways!
Is it because im on vista?
To be honest i have no idea what hardSPL actually is (sorry) im just tryin to get the simlock off!
Is there a hardSPL tutorial thread somewhere?
(sorry for being king of the noobs!)
beeringo said:
Hmmm... tried flashing hardSPL and it turns out it makes no difference i took the cable out the program doesnt work! Comes up with a connection error anyways!
Is it because im on vista?
To be honest i have no idea what hardSPL actually is (sorry) im just tryin to get the simlock off!
Is there a hardSPL tutorial thread somewhere?
(sorry for being king of the noobs!)
Click to expand...
Click to collapse
thats what happens when you purchase stolen software on eBay. That sim unlocker was created by a user here and some dueche bag is selling it on eBay you should ask for your money back and make threats to report him.
redbandana said:
thats what happens when you purchase stolen software on eBay. That sim unlocker was created by a user here and some dueche bag is selling it on eBay you should ask for your money back and make threats to report him.
Click to expand...
Click to collapse
well put good sir
okey doke! will do that.
Am still having trouble. I saw on the sticky page a video tutorial for unlocking - what was the program he was using? Its different to the one i'm using! I've also tried one which runs off the phone which still doesnt work.
I think it may have something to do with the fact when i plug in the phone you can hear the windows chime thingy TWICE, then its connected...
When i run the flash program and unplug then replug the usb cable i can only hear the chime ONCE, is this something to do with vista????
OK it just decided to work, i did the same thing as before except this time it was ok.
THANKS FOR ALL YOUR REPLIES!
Oh and i found out that the program the guy was selling was indeed free and was indeed from this website: i noticed at the bottom of the program was this message:
==Kaiser Debug Output==
==Made by Olipro - 2008. www.xda-developers.com==
-Version 2.0-
SPL Flashed!
It also said this is FREE software!!
On Vista - fully close MS mobile device center.
Put the phone in bootloader mode and connect to the usb port.
Run the unlocker (don't unplug usb)
Be sure you flash to a wm6.1 first before unlock your sim. Olipro's sim unlocker works for wm6.1 only as I remember.
Good luck!
i thought it was 6.0 ...maybe for a different unlock tool? how many are there on here for the Kaiser?
Hello everybody.
Excuse my question if you think it stupid but i can't find the answer.
I can see everybody speaking about HardSPL but i don't know what it is.
May be one of you can tell me something about it and if it is possible to use it with a french orange kaiser.
Sorry for my poor english and thank you to answer me.
http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
Resolved
Thank you for the link
somwone know if is needed to make an hard spl on HP 614c ???
So, when will there be one build for the touch pro2?
There is alot of crap in this os that i would like to get fixed. perhaps win 6.5 will be better, but still not as good as what a few geeks can make.
side note, pretty sad a few geeks can build a better rom than the biggest company in the world.
birddseedd said:
So, when will there be one build for the touch pro2?
There is alot of crap in this os that i would like to get fixed. perhaps win 6.5 will be better, but still not as good as what a few geeks can make.
side note, pretty sad a few geeks can build a better rom than the biggest company in the world.
Click to expand...
Click to collapse
Here is one for the Rhodium,.....http://forum.xda-developers.com/showthread.php?t=550131
The " geeks " here only have to keep a few " hardcore enthusiasts " happy, and if they don't like the rom that you cooked, tough s##t use someone else's rom. image all the compromises you need to make to keep a million casual users happy.
Well once i learn enough about how to do it. ill probably just make my own rom. unless I find one that is really good.
First i need to learn the proccess and see if its even possible yet with a pro2.
tho the new os is comming out in 2 weeks for sprint.
birddseedd said:
Well once i learn enough about how to do it. ill probably just make my own rom. unless I find one that is really good.
First i need to learn the proccess and see if its even possible yet with a pro2.
tho the new os is comming out in 2 weeks for sprint.
Click to expand...
Click to collapse
There are many cooked Roms for the TP2 so yes, it is possible
now i get it, why my phone bugging me with gwes.exe and filesys.exe error cause i upgraded my rom without hard SPL ing them is it fine to hard spl after upgrading the rom ?? cause i do that and now my winmo are working so smooth...
uhuy* said:
now i get it, why my phone bugging me with gwes.exe and filesys.exe error cause i upgraded my rom without hard SPL ing them is it fine to hard spl after upgrading the rom ?? cause i do that and now my winmo are working so smooth...
Click to expand...
Click to collapse
i think this question is already answered on previous post above.
but in a short sentence, most people do hardSPL before flashing Rom.
for what? of course to avoid device brick.
related to your experience, that's only a lucky shot but not in a safely manner.
muhrizky said:
i think this question is already answered on previous post above.
but in a short sentence, most people do hardSPL before flashing Rom.
for what? of course to avoid device brick.
related to your experience, that's only a lucky shot but not in a safely manner.
Click to expand...
Click to collapse
yes i know i dont follow the instruction... since SEUS didn't remind me to hard spl it before i can upgrade my phone.... im also think that im lucky that my phone doesn't brick with my manner's on how to upgrade it first then hard spl it...
dari jakarta ya om ??? hehehe asoy nih bisa berbagi pengalaman dengan x1 kita...
Hard SPL questions
After i do a hard SPL, and install a wm 6.5 rom build 23060
say i dont like the ROM, can i always flash back to original 6.1?
or will the hard SPL I made on my xperia prevent that?
you can always go back to the origninal rom, you just simply have to find the rom. itl be available on here or ppcgeeks somewhere.
there is also a tool to UN Hard spl. you mainly use it if you need to send yoru phoen back to your carrier for replacement.
effect of Hard-SPL
Does installing Hard-SPL erase everything on the phone?
I'm trying to get myself to the point of not being terrified to try this.
I know the forums aren't for psychotherapy, but after spending $300 on a device, I do NOT want to render it unusable....help?!?!
Hi,
since the wiki page doesn't work, can someone explain what "hardspl" is?
Please.
Thank you.
Why should I do it?
What benefits can I get from "hard spl" ing my Tilt 2 (ATT) Rhodium 300?
I've run crud scraper and free'd up some space, ok. It doesn't run faster..?
I'd like to know what's the purpose of "hard spl".
Sorry if I sound ignorant, but I'm just that. IGNORANT of why, not stupid.
LOL
ps.........I hate the freeking ATT background images.
Hey there guys
I have posted this exact same post on aximsite, but I figured that I might as well post here too since maybe more people would read it.. thank you very much!
I'm quite desperate right now. My Axim x50 is tottally dead. Let me explain: I have it for about 2 years now, and when I bought it, it came originelly with wm2k3, and about 3 months later, Dell shipped a update CD with WM5 (it had just come out) and so I made the update succesfully, and had this WM5 vrs. A01 installed till this week.
Then, this past weekend I decided to update it, but I ended up bricking it by trying to force install WM6 MagLite's version for X50v (mine is x50[mid]). Well, as we all know, that would do the job. I was just so exited to do the update I didn't bother to read the threads.
Well, now my axim is tottally dead, I decided to read all posts and threads from all sorts of forums on the web, specially AximSite and xda-developers, and so I no longer consider myself a total noob, since I have read so much.
However, none of the intructions seem to do the job, because my Axim won't load the SD bootload screen at all! And I am doing it correctly, pressing wireless+power+reset. I have done that before and it worked. I think somehow the unsuccesful instalation of wm6 must have corrupted something and is now impeding the device from eving bootloading...!
The only thing it does is turning the power led red when it's connecet to the battery charger, then it becomes green when it is full (as usual). Won't turn on though. If I try to turn it on, to reset, load that test (rec+power+reset), or load bootload, nothing works. The only time something happens is when its on the PC USB craddle:Then when I try to bootload, the power light flashes in red pretty fast, then goes off again and that's all.
Yesterday, it all of a sudden showed a screen saying I had a problem on the memory, and invited me to press I think Contacts in order to solve it by recalling the standard configuration, but after I did so, it died again.
I'm completely desperate cuz I really liked it, it was part of my life already after so many years, and plus in my country (that would be Brazil) such eletronic devices and simply unafordable (I bought mine when I was an exchange student in US on 06), so if I actually screwed it up tottaly, I'm pretty much gonna be aximless forevermore.
I'm sorry for the gigantic post. I made an effort to post all information I could. I'm desperate and willing to follow any procedure for bringing my PDA back to life. I have the USB craddle if that helps, FAT32 SD, PC card reader, etc. If you guys could give me any help I would fully aprecciate..
And I fully endorse the words from the other members thanking you guys that are always trying to bring up something new for PDA lovers across the world, specially for us Axim users, forgotten now by Dell aparently..
Sorry for my possibly bad English! Thank you very much in advance.. I'm available for further explanations about my situation, if any of you is willing to help..
Cheers from Brazil!! Best regards to u all!
Oh, and I'm new here, so I hope I have posted this on the appropriate place. If not, I'm sorry, I guess I can move it then.. Thanks again
And I meant to say that if any of you actually read this and understands that there is pretty much nothing I can do, then I would appreciate if you tell me so, so that then i can simply get over it.. thanks
have you tried to run the ruu you were talking about that they shipped you on a cd for wm5?
Yes I have indeed, however it requests that the Axim is connected to PC via ActiveSync (it was designed to intall wm5 especificly on wm2k3 running devices) and that is not possible, since the Axim is bricked and won't turn on at all.. If only there was some other way to acces it trough the PC or something..
But thanks for the atention josefcrist! Please do share any other ideia that might come up
I bought my Htc Magic in Hong kong last August.
I paid for it more than $620 (usd) after I found that the seller tried to cheat me.
I root it and my last rom was MyHero 2.0.5 with Official SenceUI on HTC Kernel 2.6.27 and it allmost worked perfect in my languge.
After that on 17/11/09 when some guys here where "happy to annonce" about the official senes upgrade I did it and since then I'm stuck with a piece of ***** and I'm gonna loose my money after I lost some days of work and 4 sleepless nights.
I feel like somebody rapped me because I can't even downgrade to the rom version I hade when I bought my Htc Magic.
It makes me sad because if HTC wouldn't release us I don't know if I'll ever buy any machine from theme again.
see:
Power to the people - the boycott as a democratic action
I think you're being a bit extreme... I own the HTC Magic and I'd gladly buy another if I broke this one...
There are methods to downgrade your HTC Magic back to the MyHero ROM. I upgraded to the Official HTC image and downgraded back to CyanogenMod in the same night with no troubles at all. Have you even tried the goldcard method? Have you done any research and reading?
And besides, crap like this belongs in the General forum where nobody will read it anyway.
Sounds like you're over reacting completely.
Instead of complaining about something that may, or may not, be HTC's fault you could try explaining your problem properly and seeing if anyone can help you fix it.
JackMagic said:
Sounds like you're over reacting completely.
Instead of complaining about something that may, or may not, be HTC's fault you could try explaining your problem properly and seeing if anyone can help you fix it.
Click to expand...
Click to collapse
It is HTC's fault, as they made it almost impossible for us to get rid of the perfect SPL, as they should listen to us! and let us to do what the.... we want with our phone!
The perfect SPL he is talking about is not breakable for now! nobodey can do anything about it not even GOOGLE!
XDA is here because of the leak of support from HTC from the first place , it always has been and will be HTC's fault when people here get stuck with this kind of ****!
I will start making a dialogue with htc on Tweeter later today , we should show what we want.
My proposal is ==> let thous who want, register their phone on HTC.com and loose their warranty for ever and then let them have a S-Off spl so they can do whatever they want with their phones.
avri1 said:
I bought my Htc Magic in Hong kong last August.
I paid for it more than $620 (usd) after I found that the seller tried to cheat me.
I root it and my last rom was MyHero 2.0.5 with Official SenceUI on HTC Kernel 2.6.27 and it allmost worked perfect in my languge.
After that on 17/11/09 when some guys here where "happy to annonce" about the official senes upgrade I did it and since then I'm stuck with a piece of ***** and I'm gonna loose my money after I lost some days of work and 4 sleepless nights.
I feel like somebody rapped me because I can't even downgrade to the rom version I hade when I bought my Htc Magic.
It makes me sad because if HTC wouldn't release us I don't know if I'll ever buy any machine from theme again.
see:
Power to the people - the boycott as a democratic action
Click to expand...
Click to collapse
A: Its your fault its "broken"
B: What do you define as broken?
C: Can you fastboot it, ADB it.... anything??
D: post some info and we can maybe help you fix it.
E: Post in the proper place.
F: You can't boycott a product everyone loves, and even when the few break it, they buy a new one or have HTC warranty fix it (paid or not)
Z: Post some info, and we can maybe help you fix it.
J: Post some info, and we can maybe help you fix it.
P.S
I know this is going to come up, but please don't blame bad English on not being able to get/request help.. if you spent 6**(usd) on it, paying 10 usd to a friend to help you properly translate it, would be worth it IMHO.
It is NOT HTC's fault!
Can you imagine if they made it easy for every idiot on the street to install the wrong image on their phone and then send it back for warranty?
They use a 'perfected' SPL in order to protect their warranty department and their proprietary software and hardware. If you want a completely open platform then you shouldn't have bought an HTC phone.
Now really, if you don't want the perfected SPL, then DO SOME READING!!! There are instructions on this very forum on how to create a GoldCard that will allow you to flash an older HTC RUU that does not have the perfected SPL. I know because I tried the RUU that you're running on your phones and I'm now running CyanogenMod 4.2.5 with SPL 1.33.2010 and a custom recovery image.
Quit the *****ing, do some reading, and shut up already!
shwan_3 said:
It is HTC's fault, as they made it almost impossible for us to get rid of the perfect SPL, as they should listen to us! and let us to do what the.... we want with our phone!
The perfect SPL he is talking about is not breakable for now! nobodey can do anything about it not even GOOGLE!
XDA is here because of the lack of support from HTC from the first place , it always has been and will be HTC's fault when people here get stuck with this kind of ****!
Click to expand...
Click to collapse
regardless of what you think, it is your fault, you made every decision to "HACK" the "known working" software and thus broke it.
I will start making a dialogue with htc on Twitter later today , we should show what we want.
My proposal is ==> let those who want, register their phone on HTC.com and loose their warranty for ever and then let them have a S-Off spl so they can do whatever they want with their phones.
Click to expand...
Click to collapse
This will, be exactly what we (people with rooted, death spl bla bla bla) have. Also, correct me if I'm wrong, but isn't that what ADP2 is for??
did you nandroid back up before you flashed the new rom? Why not just flash over the current rom that you have. Doesn't sound like your problem is that extreme. Can''t see why your having a problem. Any alteration of the OS that came with the phone would be your fault for changing that. But if you were smart enough to root and flash a custom rom, you should be able to get yourself out of this. Unless, someone did it for you. In that case. Hold them responsible. Good luck. I'm sure your not happy with this advice
shwan_3 said:
It is HTC's fault, as they made it almost impossible for us to get rid of the perfect SPL, as they should listen to us! and let us to do what the.... we want with our phone!
The perfect SPL he is talking about is not breakable for now! nobodey can do anything about it not even GOOGLE!
XDA is here because of the leak of support from HTC from the first place , it always has been and will be HTC's fault when people here get stuck with this kind of ****!
I will start making a dialogue with htc on Tweeter later today , we should show what we want.
My proposal is ==> let thous who want, register their phone on HTC.com and loose their warranty for ever and then let them have a S-Off spl so they can do whatever they want with their phones.
Click to expand...
Click to collapse
shwan_3 said:
It is HTC's fault, as they made it almost impossible for us to get rid of the perfect SPL, as they should listen to us! and let us to do what the.... we want with our phone!
The perfect SPL he is talking about is not breakable for now! nobodey can do anything about it not even GOOGLE!
XDA is here because of the leak of support from HTC from the first place , it always has been and will be HTC's fault when people here get stuck with this kind of ****!
I will start making a dialogue with htc on Tweeter later today , we should show what we want.
My proposal is ==> let thous who want, register their phone on HTC.com and loose their warranty for ever and then let them have a S-Off spl so they can do whatever they want with their phones.
Click to expand...
Click to collapse
Lol, angry opinionated poster FTW. Probably should have used an XDA dev's senseUI ROM instead then shouldn't he, as his previous ROM was working so well.
XDA is here to offer choice and because some people enjoy customising their devices - you then have the majority of HTC Magic users who wouldn't know what an SPL was if it hit them in the face, and are perfectly happy with their official sense ROM from HTC.
It's a matter of perspective, and yours and the OP's seem to be rather slanted. Have fun enlightening HTC about their wrong doing, but you're not making a very strong point here as you know the risks of flashing your phone - maybe he should have read up about perfect SPLs before he flashed his device.
Good luck
And if the OP would have waited a couple hours after seeing the Official update posted, he would have noticed that somebody very quickly deduced that the HTC update would install the 'Perfected' SPL.
You can't blame anyone else for your impatience and ignorance.
I Have the official HK sense rom 32A and I need help
It is NOT HTC's fault!
Can you imagine if they made it easy for every idiot on the street to install the wrong image on their phone and then send it back for warranty?
They use a 'perfected' SPL in order to protect their warranty department and their proprietary software and hardware. If you want a completely open platform then you shouldn't have bought an HTC phone.
Now really, if you don't want the perfected SPL, then DO SOME READING!!! There are instructions on this very forum on how to create a GoldCard that will allow you to flash an older HTC RUU that does not have the perfected SPL. I know because I tried the RUU that you're running on your phones and I'm now running CyanogenMod 4.2.5 with SPL 1.33.2010 and a custom recovery image.
Quit the *****ing, do some reading, and shut up already!
__________________
sorry for my English.
i didn't breack the phone it works fine.
the problem is that I can't put my languge, as a lot of people here.
I spent all my time in reading and aearching s solution.
see as an exampale in the first post in this forum:
"right the SPL obviously doesnt like remote writing of the recovery, dont worry trying this wont **** up your device. i was trying to achieve what the oneclick root method does which basically just writes a recovery to the device to bypass the SPL but, it obviously wont allow remote flashing through ADB. il be back today to include the flashrec.apk within the rooting method unless i quickly devise a script to run off the device to flash the recovery ..... il be back
I apologise for this people i am on it. i just dont have a device with a perfected SPL to test it myself.
__________________
Rooted Via Relentless Rooter Plus <-WANT ROOT?
--------------------------
Latest Cyanogenmod
--------------------------
Amon rAV 1.2.1 Recovery
--------------------------
Haykuro 'DaNgEr' SPL
--------------------------
Apps2sd + Swappiness
--------------------------
IF you like my Software why not consider
joining upto costa bingo for free,i get bonus
credit you see
Register"
So can any one HELP me?????????????????????????????
So can any one HELP me?????????????????????????????
Click to expand...
Click to collapse
With a perfect SPL, not really. That thread you "quoted" from is your best bet if the goldcard method doesn't work on this SPL. redmc said he would be working on it, so worth a shot if you're really that screwed.
Or maybe send Amon_ra a well written PM asking if he knows a solution using a goldcard.
Nice guy nice baby you behave as a baby (baby face)
How i can know all this that i canoot root is as the original rom.
Isn't it an "open code"
That made very little sense to me. redmc is working on a way of breaking perfect SPLs with his Relentless Rooter software - so wait and see.
Android is open source, but this isn't the OS you're having an issue with, it's the SPL.
Using goldcard
With a perfect SPL, not really. That thread you "quoted" from is your best bet if the goldcard method doesn't work on this SPL. redmc said he would be working on it, so worth a shot if you're really that screwed.
Or maybe send Amon_ra a well written PM asking if he knows a solution using a goldcard.
__________________
THANK'S A LOT
I USED GOLDCARD AS DID OTHERS BUT IT DOESN'T WORK.
MAYBE I'LL WAIT TILL redmc OR Amon_ra CAN DO SOMETHING
BEST REGARDS
Lol, well considering you have no other options, that sounds like a good idea - and what I just suggested.
I'd say good luck, but I've got the feeling any amount of luck will be of no use to you whatsoever..
Does anyone appeal to Htc to let us install our Native Languge
Does anyone can appeal to Htc to let us al least to install our Native Languge
ways to root your phone
This should help you root your phone:
[How-To] Fix perfected SPL (fastboot remote: not allow)
Steps to Root Airtel HTC Magic and Mytouch 3G( for US users)
[email protected]: Rooting your HTC Magic (MyTouch not yet)
"Le problème se trouve toujours entre la chaise et le clavier." / The problem always lies between chair and keyboard.
Also valid for phones
Anyone here who flashes custom roms, but still tries the official HTC update is a complete idiot as far as i'm concerned as everyone here knows that HTC will most likely try to include a perfected SPL in their updates