Pls help me in upgrading my wizard to wm6 - 8125, K-JAM, P4300, MDA Vario ROM Development

Hi to all,
I have Imate K-jam,
ie, wizard200 PDA,
Specs:
ROM-1.1.9.3
RADIO-01.01.10
FLASH CHIP TYPE- M-SYATEMS G3
I had a Jasjam before and i have used HardSPL to temporarirly unlock CID before upgrading to wm6.
Is there anything same like there for my wizard with the above specs?
Pls give me some idea friends

skr_xd said:
Hi to all,
I have Imate K-jam,
ie, wizard200 PDA,
Specs:
ROM-1.1.9.3
RADIO-01.01.10
FLASH CHIP TYPE- M-SYATEMS G3
I had a Jasjam before and i have used HardSPL to temporarirly unlock CID before upgrading to wm6.
Is there anything same like there for my wizard with the above specs?
Pls give me some idea friends
Click to expand...
Click to collapse
have some reading
http://forum.xda-developers.com/showthread.php?t=285435
http://forum.xda-developers.com/showthread.php?t=298613
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard

ndn715 said:
have some reading
http://forum.xda-developers.com/showthread.php?t=285435
http://forum.xda-developers.com/showthread.php?t=298613
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Click to expand...
Click to collapse
Thanks a lot friend

Related

Qtek 9100 2 wm6??

Hi!
I've tried several WM6 upgrades posted in the forum, either the upgrade is unsuccessful or the ROM is not aplied to my phone.
Tried the Kitchen v.2, Core 2 etc etc
I'm sure It's not operator-locked!
Do I have to upgrade the OS, SPL and IPL manually with separate roms?
Please help me!
I want wm6 with as many options (progs) as possible!
Is there any ROM out there that I can apply on my phone?
My phone:
Qtek 9100
WM5 OS 5.0 (5.1.195 Build 14847.2.0.0)
OMAP850-195MHz
ROM-version: 2.17.7.1 SVE
ROM-date: 2/13/06
Radio: 02.61.11
Protocol: 4.1.13.28
ExtROM-ver: 2.17.7.103
If you get Error 300 when upgrading then u have to get rom update utility for G4 (probably) (Look carefully in Core 2.0 thread - the first post, there is G4 Users chapter)
If your rom is not flashed but the process goes to 100% complete then probably you have CID locked device, but anyway let the gurus give their advices.
I'm sure that It isn't CID-locked (if that is the same as operator-locked)!
Nope, CID locked is different than SIM Locked
Ok!
How do I unlock It ?
What I understand one must first identify G# or G4, but how?
The only information I've got is listed in my first post.
/Mike
mostberg said:
Ok!
How do I unlock It ?
What I understand one must first identify G# or G4, but how?
The only information I've got is listed in my first post.
/Mike
Click to expand...
Click to collapse
Read this and all will be explained:
http://forum.xda-developers.com/showthread.php?t=298613
mfrazzz said:
Read this and all will be explained:
http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse
Great! Thanx!

Help needed

Hi All,
I purchased an O2 Neo XDA here in India which Shows "HTC Inovation" Screen on Startup and then with the below details it Shows "Dopod Enjoy Mobility". The following are the details of My Neo
IPL 2.15.0001
SPL 2.15.0001
RADIO 02.19.21
OS 2.15.13.27
I want to ask the following:
1) Is this a cloned version? or Which brand it is HTC or Dopod??
2) Is WM6 possible for my Neo? if Yes, I would be grateful to u if you guide me on how-to.
3) I am visiting this forum frequently and reading the post about upgrading Prophet. I am confused with some words such as Kitchen ROM, Cooked ROM, Bricked etc. Can anybody tell me what these are exactly?
My main intention is to upgrade but I am afraid of doing it 'cause wrong upgrade my cause damage to my Neo. So please guide me and also tell me what are the advantages of WM6 over WM5?
Thanks in Advance
Aju
Dopod is a Phone Provider like T-Mobil or Vodafone
Yes you can install WM6 on it
Kitchen is a collection of Tools to Cook a ROM
Cooking is more change some settings ... programms ... what ever in a ROM Images
Bricking = damage Phone its possible if you write the Firmware with the wrong DOC
Please read Wiki!

Upgrade to WM6

Hello @ll,
Can you help me and tell what I have additional steps to do for upgrade Compact 2 from WM2003 to WM6. I have allready found upgrade howto
http://forum.xda-developers.com/showthread.php?t=363882
but I need additional information for Upgrade from WM2003. Or It this howto valid for WM2003 too?
Brgds Bratsk
No IPL/SPL No Way!
Man there's no IPL/SPL on Magician. Get me a way to put them on magician and I tell you how to upgrade to wm6!
bratsk said:
Hello @ll,
Can you help me and tell what I have additional steps to do for upgrade Compact 2 from WM2003 to WM6. I have allready found upgrade howto
http://forum.xda-developers.com/showthread.php?t=363882
but I need additional information for Upgrade from WM2003. Or It this howto valid for WM2003 too?
Brgds Bratsk
Click to expand...
Click to collapse
You're on the wrong forum, the Mda Compact II is a Charmer not a magician. You can go to the proper charmer forum to upgrade your device to WM6.
EDIT
err. did i read it correctly that you compact 2 has wm2003? if it is, then its not a charmer. Its a magician, youre pretty stuck with 2003se same as everybody else.

qtek 9100

Hi,
I know all about search and know how to use it. Doing this favor for a friend and I need to install a rom on his qtek. Don't know much about it but I did change the IPL and SPL to 2.21.xxx1
Now I did try to install a wm6 rom, the SNN v2, but it asked me to upgrade my utilities. A search on the forum came negative. What did I do wrong and how can I rectify?
Thanks
Hi,
Have you CID-unlocked your 9100 ?
N.
floho said:
Hi,
I know all about search and know how to use it. Doing this favor for a friend and I need to install a rom on his qtek. Don't know much about it but I did change the IPL and SPL to 2.21.xxx1
Now I did try to install a wm6 rom, the SNN v2, but it asked me to upgrade my utilities. A search on the forum came negative. What did I do wrong and how can I rectify?
Thanks
Click to expand...
Click to collapse
Are you sure its IPL/SPL 2.21.xxx1,if it is then its a G4 device, you cannot flash any wm6 rom onto it directly,it can only be upgraded through either 'SoftSPL' or 'HardSPL'. as it cannot be CID unlocked and its required to have a CID unlocked phone to upgrade to wm6 Rom.
I did this with my Qtek 9100 and now I can try any WM6-rom I like.
http://forum.xda-developers.com/showthread.php?t=285435
N.
naddispaddis said:
I did this with my Qtek 9100 and now I can try any WM6-rom I like.
http://forum.xda-developers.com/showthread.php?t=285435
N.
Click to expand...
Click to collapse
Yes! your phone is a G3 device with ipl/spl 2.xx or 2.xx.xxx,it can be CID unlocked,but his phone is a G4 with ipl/spl 2.21.xxx1,it cannot be CID unlocked like your

mda vario III rom 1.56.0000 or alternative needed

Hi,
i have succsessfully unlocked my mda but i have forgett to extrakt and save the orginal hardspl whitch was spl-1.56.0000 with nbhextract.exe
the mda works... but mabye a newly spl version is better for my mda i guess...
so mabye one of you can help me to find the original spl or a better one that works on my mda....
i have read and searched the The Ultimate Radio Thread but i can't find out whitch one is the right one for me... as an excuse my english is not the best...
sorry & thx
download update to 6.1 from your countries T-Mobiles website.
For example: Dutch
It restores all settings to original
help me
spuniac said:
Hi,
i have succsessfully unlocked my mda but i have forgett to extrakt and save the orginal hardspl whitch was spl-1.56.0000 with nbhextract.exe
the mda works... but mabye a newly spl version is better for my mda i guess...
so mabye one of you can help me to find the original spl or a better one that works on my mda....
i have read and searched the The Ultimate Radio Thread but i can't find out whitch one is the right one for me... as an excuse my english is not the best...
sorry & thx
Click to expand...
Click to collapse
hi there can you help me what software did you use to unlock
Dust2Dust said:
download update to 6.1 from your countries T-Mobiles website.
For example: Dutch
It restores all settings to original
Click to expand...
Click to collapse
Not if you flashed Hardspl. The rom will go back to the original rom, but the hardspl will not go back to the stock spl. For that you must find your stock spl and use jumpspl to re-lock your phone to the stock spl and rom.
sameer2515 said:
hi there can you help me what software did you use to unlock
Click to expand...
Click to collapse
Just follow the easy steps here to unlock your phone.
http://forum.xda-developers.com/showthread.php?t=433835

Categories

Resources