Hello,
I am new to this forum and smartphone world. So sorry if my questions will be silly for you.
I need some GPS navigation in my phone (i-Mate SP5, WM5), so I decided to use TomTom. I installed (basically copied it to memory card ) TomTom 6, it is just for PDA with touchscreen, but it works in my i-Mate. But problem of course is that you can't use it properly without "mouse". For that I downloaded FakeCursor (and SPHelper later) but I cant make it work properly. I copied FakeCursor to Windows folder. I was trying to copy changed long_CAMERA.lnk to Windows folder so that I could load mouse with camera button. But I could not replace the file, unchecking "read-only" didn't make any difference.
And if I load FakeCursor from file manager I can only move it and thats it (or is it normal?) and can't "click" anything. How do I click using FakeCursor?
Using SPHelper is the same I did managed to get mouse in TomTom but again I couldn't click. All SPhelper menus works fine.
I think its is something very simple that I am missing.
Please help.
Thank You in advance for your answers.
Tomas
Can it be so that no one in this forum knows how to use fakecursor?
i don't use fakecursor... only sphelper
try to press 1 or 2 or 3 keys (instead of joystick click) on cursor-mode with SPHelper..
i also have a smartphone (wm5) and i need sphelper or fakecursor. can someone tell me where i can find it cracked?
no warez discussion here le
Fakecursor is freeware. It's just an executable file, which can be found in my ROM.
But SPHelper is a shareware, Nitro, do you use GPS with tornado ?
karhoe said:
Nitro, do you use GPS with tornado ?
Click to expand...
Click to collapse
As a matter of fact, I do. I use Destinator for WM5/6 Smartphones (Greek Map) and TomTom 5.xx for Smartphones (European Map). Also I have Destinator 7 for PPC installed and control it using FakeCursor.
And for staying on-topic... FakeCursor emulates a "pen touch" on the screen. When it's enabled, you can't use the keyboard. To exit press Home and then Back to return to the previous app. It is better launching it using a hardware key shortcut (such as long Camera Key press). Remember than you can use FakeCursor only with applications that support a touch screen!
And actually clicking or tapping with FC... how is this done? I couldn't figure it out when I was playing with your ROM.
It's done the obvious way!!!
NiTroGenious said:
It's done the obvious way!!!
Click to expand...
Click to collapse
Well, I clicked the joystick, which seemed obvious, and it didn't do nothing.
Related
Okay, I have been using this amazing little program for one function only for quite some time, but it is a vital ability for me (I use it to create an "esc" key to use with legacy DOS software on my desktop) that I need to access remotely to work from the road.
A co-worker recently bought a Verizon 6700 and I was going to load the same program on his computer. Apparently the nique.com website is gone.
Fortunately I have the cab file (on 2 workstations and my memory card!!) but I was wondering if anyone knew anything about this, where it went, if they are still developing the app. Also, the cab I have was the one specifically for Wizards. A Google search got me to freewarepocketpc.net but the download link took me to the non-existent web page.
Does anyone have the general purpose cab file?
It is still there:
http://www.nicque.com/PQz/PQzII.htm
But I have found a bug:
When using Hermes Dialer to dial a number, or during a phone conversation, the "up" button of the jog-dial is wrongly mapped. Instead of adjusting the in-call volume like the "down" of jog-dial, it switches to the today screen after pressing the "up" jog-dial.
Could anyone confirm that they have the same issue? Thanks.
This was 'the' big thing I was missing since I switched from my Nokia Comminicator to the Imate JasJar.. The Ctrl+Alt keys.
I'm soooo happy I finaly found a solution through this great program.
Many thanks!
I have it installed on the Crossbow WM6 2.02.
I looking for the gsGetFile.dll file to be able to see all files.
But when I click on the link I see a Japanse website, were I can't find the download of the file. Is there a directlink available?
http://discussion.treocentral.com/showthread.php?t=141003
Let me just begin by saying that you all are awesome. I am incredibly impressed you were able to get WM6 working on the Tornado. I have a TMobile SDA (USA). I used Andot's Perfect WM6 ROM to flash. I didn't have any problems other than a few spontaneous reboots after flashing the ROM. I do have a question though.
After flashing, I now cant get my T-Mobile button nor my review, play, and forward buttons(the ones that are on the same row) to work. I would like them to work with media player like they used to. I could give a rat's ass about the T-Mobile button, but it would be nice to be able to assign it or any of those other buttons to a specific function.
Is there a specific customization CAB I was supposed to install for the TMobile SDA (USA) to get those buttons working? How can I use or reassign those buttons?
Thanks in advance for your help!
Hello atarilynx,
I have your same phone, which is also identical to the sp5m.
go get phil's extras.zip from
http://forum.xda-developers.com/showpost.php?p=1417372&postcount=4
and install the sp5m button fix cab
after that, you can to into wmp and assign the buttons to do their normal tasks.
also, after applying that fix, the t-zones button will open to an ie search page.
Many thanks...
Thanks a bunch...that works for me. You all rock!
Maybe one other question...when I imaged my phone, after it was done, it would reset about every few minutes. Sometimes I would try opening stuff, and it would seem to lock up, then reset.
Things seem to be ok now... I have not had it reset on me once after the first few hours. Did others have that experience too?
Neither of the phones that I've flashed have had that problem.
Both of them being TMob SDAs.
I have no clue why your phone was doing that, hope it got that out of it's system!
actually if you guys notice, it still doesnt work. you will try and configure the fastforward button, but when you try to hold it down, it only sees it as a press, not a hold.
true, the hold and seek feature is lost from those buttons, but you can still do that with the joystick if you must.
I personally have no problem with that as I hardly seek through songs.
something else is still tweaked though, on one of my sda's, i did the button fix then installed the tcpmp shortcuts from mobile.surrealnetworks.com/SDAapps.htm
now the buttons do not line up at all with what they are supposed to do. I think the "previous track" button becomes the play button and whatnot.
maybe phil can come up with a better sp5m fix
or, you know, someone else who actually knows what's going on.
I need to sit down some evening and really dig in and figure out what exactly these fix cabs are doing.
I think you need to find the attribute for WMplayer which is used for seeking forward or backward, then save it as Long_AP#.lnk where # is the button number
karhoe said:
I think you need to find the attribute for WMplayer which is used for seeking forward or backward, then save it as Long_AP#.lnk where # is the button number
Click to expand...
Click to collapse
In the past, I have had poor luck with assigning a Long_AP command when there wasn't one already set for that button. Not sure if something needs to be added to the registry as well?
Otherwise, I would set long buttons for all sorts of apps :-/
Like, in Andot's rom, I love having the long home go to celetask.
Same, I tried to assign an attribute to long_ap, it did not work, why dont you copy the lnk files from AKU2 ROm ?
That is probably a good suggestion, tho, I still think there is probably more to it . . . I would try it out, but I'm moving in a couple days, and have priorities that must be attended to :-(
i think it has something to do with htcwmpplugin.dll, plus maybe sumthing to do with this registry i found it when i dumped the tmobile rom... and checked the rgu files
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\UIPlugins\{72F3E437-17E6-484E-9C96-13181D4039CB}]
"FriendlyName"="HTC Key Mapping UI Plug-in"
"Description"="HTC Key Mapping UI Plug-in"
"Capabilities"=dword:1
i havent tried most ,too lazy!!! hehehe!
as it has been explained in many posts in the past the htcwmpui plugin is for a homescreen wmp plugin and nothing to do with the buttons
oh ok sorry about that... will it have to do with keybddr.dll then?
What are you guys talking about "assigning attributes" to the long_ap#.lnk?
Are you talking about adding in a command line style switch to change the way the intended application will handle the shortcut?
actualy, i have followed these and othere forums for quite some time and i have yet to see if anyone has figured out how to get the media buttons working on roms were that feature does not come by default
Exitao said:
What are you guys talking about "assigning attributes" to the long_ap#.lnk?
Are you talking about adding in a command line style switch to change the way the intended application will handle the shortcut?
Click to expand...
Click to collapse
Its not attribute, its parameter/arguments
Yes ! thats what we are talking about
I have created a cab file for the same. but the problem of using the htcwmpplugin is that the keys are mapped differently. the internet explorer key is mapped to the previous button and the play key becomes the previous key.. which is a problem.. that's why i want to know which keypad drivers are being used. The keypad drivers used for tornado music or imate sp5m is a little bit different.
Try using it..
http://forum.xda-developers.com/attachment.php?attachmentid=45775&d=1186047418]
i think i got it... i dumpeed the t-mobile rom took the keybddr.dll folder and incorporated it into andots ppe v6. i also removed the keybddr.dll had in it...
after building it...
i then i copied the sp5m zip files (those short_ap1-4 .lnks) to my windows folder, installed the cab tejasphatak gave here... then it all worked...
the keybddr.dll folder
here is the file incase you guys want it...
iron1 said:
here is the file incase you guys want it...
Click to expand...
Click to collapse
i copied the files, then installed the cab, but it's still as if i only installed the cab. the back/reverse buttons works as play and hte play button works as forward and etc...
Is possible to install and use software for touch screen on our VOX?
i bought a gps reciver and include navigation software, but for touch screen ...
can work on it?
If you can get it to install, FakeCursor of SPHelper will give you a cursor you can nagivate and click with.
h4waii said:
If you can get it to install, FakeCursor of SPHelper will give you a cursor you can nagivate and click with.
Click to expand...
Click to collapse
but this will make Vox able to install software for pocket pc with touch screen too? cz now is not allowed without this kind of software
Some programs have an option checked in their cabs to prevent them from being installed on smartphones. I suppose in theses cases the developer has a good reason to do it because some ppc program scan't even be launched on smartphones. But it's true a lot of them work good and sometimes you don't even need the help of a fake cursor program, you can navigate the program with the d-pad.
mean have to arrange cab file? how to do? and if software must install whith activ sync?
Give me the cab you are looking to install and I'll have a look at it.
sorry but i dunno how to send you this software. This software is Garmin Que. It's GPS navigation software for windows mobile Pocket PC. It's store somewhere on a PC and have to install from that autostart CD with Active sync.
pomodoro said:
sorry but i dunno how to send you this software. This software is Garmin Que. It's GPS navigation software for windows mobile Pocket PC. It's store somewhere on a PC and have to install from that autostart CD with Active sync.
Click to expand...
Click to collapse
Dr. Martin Gonzo said:
Give me the cab you are looking to install and I'll have a look at it.
Click to expand...
Click to collapse
I had trying to install TIEMULATORCAL in my HTC S710, this emulator is only for Pocket PC, when I try to install appers a message "This TI emulator calculator.CAB is not for this kind of device"
If you could me help.
I attached the file. When this file is installed generate a CAB (TI.CAB) in the follow path C:\Archivos de programa\Microsoft ActiveSync\TIPocketEmulator, i am not sure if this file is the that use Active Sync to try to install into Smartphone.
Please.. help me.
Sorry for mistakes.. my English is very poor.
Fernando
trouble installing software touch screen on vox
I try to install and use software for touch screen on my VOX, but when i run the software i receive an error about missing library. I run the same exe on a ppc without problem. Any ideas about missing libraries thanks
Hi Gurus,
I've just upgraded my 2 year old TMobile SDA from WM5 to WM6.1 Std from Karhoe's excellent guide.
It worked beautifully, and now I'm trying to tweak the phone to make it better for me.
Firstly, I'd love to map the T-Zones key to the Task Manager app, which I run frequently to free up memory. With the original WM5, it was as easy as editing a registry after app-unlocking the phone.
With the WM6.1 update, I have no idea how to do that again. I found a reference to something like this on this thread but I don't want it to point to a different URL... I want to point it to the Task Manager launcher.
How do I do that?
Also, how do I change the default view on the 'Start' menu from a list of icons to a flat numbered list? I'd love to be able to launch an item with a number... they way I had it in WM5, because my toggle key isn't as responsive as it used to be.
Many thanks!,
Ananda
Edit the AP3 and AP4 file in Windows folder
Short v/s Long?
Thanks for pointing me in the right direction karhoe!
I re-mapped the T-zone button (Short_AP1, Long_AP1) links to point to the Tasks and Task Manager executables, but only the short_ap1 seems to work.
I'm assuming that the short_apX links are executed by a short press, and the long_apX links are executed by a long press... however pressing either for a short click or a long press, both only activate the short_ap1 mapped executable. Am I missing something?
Thanks,
H
I think I posted before somewhere about Long_AP# , it doesn't really work as it has something to do with the keyboard drivers.
Well, I have thought of what you thought before.
To have Short_AP2 to open Messaging, and Long_AP2 for compose new SMS
Ah!
So it doesn't work... possibly, as yet. O well... I can live with that.
Many thanks!
we can make a list here what programs whe can use on the daimond 2
edit: i found out that these programs work super on the daimond 2
Advanced_Configuration_Tool_v3.1
Apptodate
BtMusic 1.0 beta
changescreen_inst
Diamond Tweak 0.5.3 Dutch
Fabliv Action Screen 9 Btn Diamond v6 NLD
Fix Action Screen 9 Btn BT Discoverable
Fbtv
gps_speedo_arm_en
WEEKDAY
succes with tweaking.
Ive found that the game Caver works well on the diamond 2 so far!
The slingplayer software for Slingmedia's Slingbox works well even in full screen.
Microsoft Voice Command 1.60 is really, really useful. I used it for a long time now on various devices.
I was disappointed at first that it wouldn't work on the D2 but now I have fixed it. The issue is with activation from a hardware button (there's only one programmable button anyway on the D2 and that is the long press button 1 - the send key). When I went into the button settings and assigned "Voice Command" from the list it just gave an error bleep and nothing else happened. It did work from a bluetooth headset though. So I tried running the actual program "voicecmd.exe" from within a file manager and it worked perfectly!
So, I created a shortcut into \\windows\start menu\Programs so that I had an entry in the programs list for "voicecmd". I then assigned that command into the buttons settings and it works fine now.
I hope this will help anyone else.
Just tested G-Config, it works perfectly!!!
http://forum.xda-developers.com/showthread.php?t=487991
Advanced_Configuration_Tool_v3.2 alsoworks
but you need to update .netcf to 3.5 first
cleanRAM!
fingerkeyboard!
Advanced Config is at v3.3 since forever >.>
S2U2
TouchLockPro
G-Pad
MobilePad
TaskFacade
TF3D2 Tweak
HTC Weather Master
S2P
Nitrogen
Wisbar Advance
can you write short description and possibly links??
I must add G-Config to the list, as this utility allows enable screen rotating for specified application...added TomTom to the list and works wonderful in landscape.
i-nigma barcode reader works great!!!
http://www.freewarepocketpc.net/ppc-download-i-nigma-barcode-reader-v1-4.html
Does anyone except me use this on a regular basis by the way?
I haven't seen it so often in England but when i go to Japan it's everywhere! literally...club flyers...outside shop, on bill boards, on adverts...etc it's so useful as well!
gadgetgaz said:
Microsoft Voice Command 1.60 is really, really useful. I used it for a long time now on various devices.
Click to expand...
Click to collapse
Which version of MSVC are you using?
I have tried 1.6.19965 but I get no BT activation of VC, pressing the send key is fine (after your startup link suggestion).
Filbert
filbertsnood said:
Which version of MSVC are you using?
I have tried 1.6.19965 but I get no BT activation of VC, pressing the send key is fine (after your startup link suggestion).
Filbert
Click to expand...
Click to collapse
Have you enabled voice command in settings? I have 1.6.19214 installed and BT activation works just fine once voice command is enabled. I don't bother with send key activation.
shuflie said:
Have you enabled voice command in settings? I have 1.6.19214 installed and BT activation works just fine once voice command is enabled. I don't bother with send key activation.
Click to expand...
Click to collapse
Thanks for your reply. Did you get an "unrecoverable error is setup" when installing? I did, but it seems to be working now after making the voicecmd.exe link in Start Menu/Programs and - here is the key - restarting the phone.
Thanks again
Filbert
Enable GPS mode in the camera for geotagging and TomTom
Like previous phones, the Topaz includes a mode for embedding your location (from the GPS) into photographs.
This can be enabled by changing the value of the DWORD value Enable from 0 to 1 in the registry at HKLM/Software/HTC/Camera/P10.
Initial indications are that the bug that plagues earlier versions (that of placing locations between 0 and 1 degree west of Greenwich to the east of Greenwich instead) is fixed.
To use this feature in TomTom Navigator, take a picture in GPS mode, then copy the photo out of the My POI folder into a folder named GEO-PHOTOS in the root of your storage card. Then TomTom can Navigate to Picture using the embedded co-ordinates.
Filbert
filbertsnood said:
Thanks for your reply. Did you get an "unrecoverable error is setup" when installing? I did, but it seems to be working now after making the voicecmd.exe link in Start Menu/Programs and - here is the key - restarting the phone.
Thanks again
Filbert
Click to expand...
Click to collapse
No, it installed fine. I always get that error when I install the MSVC UK version I bought though. Didn't bother with that version this time and went straight to 1.6.19214 as that had worked perfectly on my HD before I lost it.
embedding location in fotos
filbertsnood said:
Like previous phones, the Topaz includes a mode for embedding your location (from the GPS) into photographs.
This can be enabled by changing the value of the DWORD value Enable from 0 to 1 in the registry at HKLM/Software/HTC/Camera/P10.
Filbert
Click to expand...
Click to collapse
Is there an easy way (like in winXP) to get acces to the registry of the TD2?
I don't know how to get in. Please help.
Is there also a registry fix to fix the problem with Tomtom (cutting off voices) on the TD2? (see also http://forum.xda-developers.com/showthread.php?p=3660120#post3660120):D
Thanx in advance.
Frankkk
_____________________________
HTC P3600 Trinity M700
HTC P5353 Topax Touch Diamond 2
The version of Microsoft Voice Command that I use is in a different number range to the ones posted here. It is v1.60.4622.0 and hasn't been updated for ages as far as I know.
After putting the shortcut into the programs menu and rebooting, it works very well.
More Programs That Work With D2
fg-specialist said:
we can make a list here what programs whe can use on the daimond 2
edit: i found out that these programs work super on the daimond 2
Advanced_Configuration_Tool_v3.1
Apptodate
BtMusic 1.0 beta
changescreen_inst
Diamond Tweak 0.5.3 Dutch
Fabliv Action Screen 9 Btn Diamond v6 NLD
Fix Action Screen 9 Btn BT Discoverable
Fbtv
gps_speedo_arm_en
WEEKDAY
succes with tweaking.
Click to expand...
Click to collapse
Yes the above work.
What I have found that also works:
1. Advanced_Configuration_Tool_v3.3 with NetCF 3.5 installed. Some settings do not change though and the Touch 3D in the extra settings does not work (incompatibility issue).
2. Xmatrix Battery and Memory Meter works (but you must restart/soft reset your D2 after installation even though there is no "restart" option after installation).
3. I have TomTom navigator 7.4 (Australia Maps) and it works ok.
4. RJV SMS Scheduler works a treat but I cannot turn off the audible notification of message sent. Not that annoying only if I am asleep!
5. Kaldma Stopwatch.
6. I presume Tmyynt SD TuneUp works. Installed fine and noticed a slight improvement in file transfer between SD card and device and external computer.
7. TF3D2 Tweak OK, except Program Icons Off does not work. Manilla Landscape works and is soooo cool.
That's it for now. What I am reeeeeally waiting/hoping for is a HardSPL that works on the D2 so we can start flashing a whole bunch of new ROMS.
Best regards to you all.
Aussie
frankkk said:
Is there an easy way (like in winXP) to get acces to the registry of the TD2?
I don't know how to get in. Please help.
Click to expand...
Click to collapse
PHM registry editor: http://depositfiles.com/en/files/362503
looks and operates very similar to winXP's regedit
i found also tomtom navigator, and fixover battery, and batty.
the last 2 are battery aplications.
anyone can give me link to donwloand TomTom navigator 7.4 (australian map)
thanks