Database Info

BRICK: Q-Mobile, Orange Uk, Hard Spl'd

****
My phone seems to have given up the ghost. A few days after having put on the excellent Q-Mobile system. My phone has refused to boot properly. Heres what happens:
In start up from Soft reset, or Power off, i get the tricolour screen saying:
KAIS130 MFG
SPL-1.0 OliPof
CPLD-8
a few2 lines benath that is written 'Serial'
it then flashed onto a white screen saying 'loading......no image file' - this all takes about a second.
And then it rests on the screen mentioned above.
I haven't dropped it or done anything other than flash- correctly.
AAAARGH! it does randomly decide to boot up properly after its been left of for a whil if that helps.
Also - active synch wont recognise it , in the tr-colour state.
HELP!!!

Just bring it back to the store and claim your warranty.
If they start asking questions just say that you are unaware of any software change, act like your life depends on it
European law states that every device should have a 2 year warranty.

Try a hard reset...
Hold down the two so-called "soft buttons" at the bottom of the screen while pressing the reset button with the stylus.
I feel your pain man!

the phone is now on, anyone out there got any advice on how to stabalise?
thansk for the support!

tuntang said:
the phone is now on, anyone out there got any advice on how to stabalise?
thansk for the support!
Click to expand...
Click to collapse
Update to dutty's v3 rom that is your best bet...

tekerleki said:
Update to dutty's v3 rom that is your best bet...
Click to expand...
Click to collapse
Its all well and good to pump your favorite ROM, but don't give bad advice. This sounds like a hardware issue to me (usually intermittent things like this are). I recommend the same as a user above...go claim your warranty and be on the safe side.
FYI there's absolutely nothing in any ROM (including mine) that should make your device do this.

Quentin- said:
Its all well and good to pump your favorite ROM, but don't give bad advice. This sounds like a hardware issue to me (usually intermittent things like this are). I recommend the same as a user above...go claim your warranty and be on the safe side.
FYI there's absolutely nothing in any ROM (including mine) that should make your device do this.
Click to expand...
Click to collapse
Maybe I should have been more clear with my previous post, it happened to me too (exactly similar symptoms) but with different rom (not Quentin).

tuntang said:
the phone is now on, anyone out there got any advice on how to stabalise?
thansk for the support!
Click to expand...
Click to collapse
Connect phone to PC with a usb cable.
Does the word "Serial" on the phone display change to "USB"?
If not you are in trouble and you have to send it to service.
But if it shows USB you can flash any ROM update.

thanks for all the help
Its sorted now, and i'm running a perfectly stable Q Mobile. Its really nice not being 'Dutty-Centric'. In response to the person that said upgrade to Dutty V3, it was bad advice for another reason. It would have been incompatible with my radio. Only AT&T versions work on my uk orange tytnII i've got the ...14.09 radio.
anyways - thanks for intervening Quentin and well done its a brilliant ROM

tuntang said:
Its sorted now, and i'm running a perfectly stable Q Mobile. Its really nice not being 'Dutty-Centric'. In response to the person that said upgrade to Dutty V3, it was bad advice for another reason. It would have been incompatible with my radio. Only AT&T versions work on my uk orange tytnII i've got the ...14.09 radio.
anyways - thanks for intervening Quentin and well done its a brilliant ROM
Click to expand...
Click to collapse
Did I read that right? How have you got a 14.09 radio on your orange UK tytn II. Did it come like that or did you flash the radio?
Edit: sorry for the 20 questions but Its the first I've heard of an orange uk tytn 2 haveing the 14.09 radio.

Flashing Killed My SIM

I just flashed to ConfusedStu Vista 1.3, everything went well until I got through the customization screen and now my sim has just an exclamation point by it. I took the sim out and put it in my razr and it is reading fine in that. Anybody have any ideas that can help me out. Even though I dont have a lot of posts Im not new to doing this or to the site, Ive been flashing my wizard for 2 years now and my tilt for about the last month and a half. Any advice is greatly appreciated. I also will say I tried to reflash radio 1.65 and that didnt help either.

xtremdremz said:
I just flashed to ConfusedStu Vista 1.3, everything went well until I got through the customization screen and now my sim has just an exclamation point by it. I took the sim out and put it in my razr and it is reading fine in that. Anybody have any ideas that can help me out. Even though I dont have a lot of posts Im not new to doing this or to the site, Ive been flashing my wizard for 2 years now and my tilt for about the last month and a half. Any advice is greatly appreciated. I also will say I tried to reflash radio 1.65 and that didnt help either.
Click to expand...
Click to collapse
i usually remove sd and sim before i flash a new rom. What does it say or show on the screen when the sim is inserted? and what does it say on the screen when the sim isn't inserted? If it says the same thing i can't help you.
try a hard reset too.

When the Sim is inserted is says nothing, just has the exclamation point by the signal meter and and x by the data connection. When the sim is not in the phone at all it gives me the no sim inserted emergency call if provider supports it. I tried to reflash the rom with the SIM out and still get the same result??? Kinda Screwy

most likely its the phone that's the problem. because if your sim was fried it wouldn't work in the razr. the razr couldn't be able to recognize the sim card at all if it was fried.

xtremdremz said:
When the Sim is inserted is says nothing, just has the exclamation point by the signal meter and and x by the data connection. When the sim is not in the phone at all it gives me the no sim inserted emergency call if provider supports it. I tried to reflash the rom with the SIM out and still get the same result??? Kinda Screwy
Click to expand...
Click to collapse
you may need to install another radio that is compatible.

Is this a new or an older SIM? Check the gold contact points on the bottom. I've used a pencil eraser to go over mine and have gotten a SIM that had stopped working ot start working again (back on my Wizard). The local AT&T stores by me (not the Spring ones, but the true AT&T ones) are good about replacing sim cards for free when I've had issues (I had a sim card out one day and my dog got hold of it off the table. Called the local AT&T store and they guy laughed then said bring it down and he'd give me a new one. Waived the $25 charge. My wife has had her sim card replaced for free also in the past from the same store. YMMV).

redbandana said:
you may need to install another radio that is compatible.
Click to expand...
Click to collapse
Tried that one too...lol. I searched and searched, I tried different ROM's with their respective radios and still same results. Looks like Im flashing back to stock and Warranty has another one coming. The funny thing is, it still tells me I have a voice mail and shows my number under the phone screen, which tells me its reading the SIM

xtremdremz said:
Tried that one too...lol. I searched and searched, I tried different ROM's with their respective radios and still same results. Looks like Im flashing back to stock and Warranty has another one coming. The funny thing is, it still tells me I have a voice mail and shows my number under the phone screen, which tells me its reading the SIM
Click to expand...
Click to collapse
if it works with the stock rom what are you going to say to the warranty people? "it doesn't work when i flash dutty's rom" lol.

mfrazzz said:
Is this a new or an older SIM? Check the gold contact points on the bottom. I've used a pencil eraser to go over mine and have gotten a SIM that had stopped working ot start working again (back on my Wizard). The local AT&T stores by me (not the Spring ones, but the true AT&T ones) are good about replacing sim cards for free when I've had issues (I had a sim card out one day and my dog got hold of it off the table. Called the local AT&T store and they guy laughed then said bring it down and he'd give me a new one. Waived the $25 charge. My wife has had her sim card replaced for free also in the past from the same store. YMMV).
Click to expand...
Click to collapse
Its the new AT&T SIM. Its wierd, works perfect in my razr just not in my tilt. and like i said in previous post all the signs are there that it is reading my SIM Just not registering on the network for calls or data???

redbandana said:
if it works with the stock rom what are you going to say to the warranty people? "it doesn't work when i flash dutty's rom" lol.
Click to expand...
Click to collapse
yeah they would LLLLOOOOOVVVVEEEEE that. LOL I just tried with the stock ROM and the SPL changed back, everything to stock and still no luck. Still get the voicemail icon and the message that I have a Voicemail though.

try going into settings>personal>phone> then to the network tab and select find network with stock rom and radio.

xtremdremz said:
I just flashed to ConfusedStu Vista 1.3, everything went well until I got through the customization screen and now my sim has just an exclamation point by it. I took the sim out and put it in my razr and it is reading fine in that. Anybody have any ideas that can help me out. Even though I dont have a lot of posts Im not new to doing this or to the site, Ive been flashing my wizard for 2 years now and my tilt for about the last month and a half. Any advice is greatly appreciated. I also will say I tried to reflash radio 1.65 and that didnt help either.
Click to expand...
Click to collapse
Check and see if the phone is turned off. Happened to me a couple of flashes in a row, sometimes you end up with the phone turned off. Just open the comm manager and turn it back on.

shutter13 said:
Check and see if the phone is turned off. Happened to me a couple of flashes in a row, sometimes you end up with the phone turned off. Just open the comm manager and turn it back on.
Click to expand...
Click to collapse
oh yeah forgot that one too.

redbandana said:
try going into settings>personal>phone> then to the network tab and select find network with stock rom and radio.
Click to expand...
Click to collapse
Tried this once and it didnt do anything, hard reset, tried searching again, went and grabbed a drink and after about 15 minutes it found network and all is good. Now back to flashing my 6.1 ROM. Ill never learn, but its so fun to have a phone that takes over all me free time on the road.
Thanks to all that helped and had some ideas. Thats why I love this place. Thank you.

the first thing you do after you flash a new rom is hard reset, now I am using the same rom as you are and all you have to do is go into your commmanager and turn flight mode OFF, push the button with the picture of a phone on it, then your phone will customize your connections to your carrier
n00b

tubaking182 said:
the first thing you do after you flash a new rom is hard reset, now I am using the same rom as you are and all you have to do is go into your commmanager and turn flight mode OFF, push the button with the picture of a phone on it, then your phone will customize your connections to your carrier
n00b
Click to expand...
Click to collapse
I have already flashed My tilt with just about every ROM out there just to have fun and see what the differecnces were, WITH NO PROBLEMS. Then I tried to flash it with the new ROM and had the problem. I appreciate you trying to help but how you gonna end with calling me a n00b, when I have more posts than you and have been here a lot longer. But thanks for the help.

tubaking182 said:
the first thing you do after you flash a new rom is hard reset, now I am using the same rom as you are and all you have to do is go into your commmanager and turn flight mode OFF, push the button with the picture of a phone on it, then your phone will customize your connections to your carrier
n00b
Click to expand...
Click to collapse
ya that was unnecessary. he clearly knew what he was talking about (but maybe didn't explore different avenues before asking). in addition, its not necessarily true that the phone customizes for you.

redbandana said:
i usually remove sd and sim before i flash a new rom.
Click to expand...
Click to collapse
Is removing sim really necessary? I’ve never had any problems flashing with my sim in...

Sane said:
Is removing sim really necessary? I’ve never had any problems flashing with my sim in...
Click to expand...
Click to collapse
no its not necessary but i do it out of precaution that something bad might happen.

redbandana said:
no its not necessary but i do it out of precaution that something bad might happen.
Click to expand...
Click to collapse
I flash only via sd card and I have never taken out my sim card and I have never had one glitch at all. In my humble opinion, flashing via sd card is much quicker and safer.

I Need Help With Atom Exec

i got an atom exec its actually not mine its my little brothers atom exec. His hardware button seems not to be functioning etc; Phone Button, Start & Message Button. Can anyone teach me how to remap the keys or anything that i need to install to get it work. thanks

ashburn said:
i got an atom exec its actually not mine its my little brothers atom exec. His hardware button seems not to be functioning etc; Phone Button, Start & Message Button. Can anyone teach me how to remap the keys or anything that i need to install to get it work. thanks
Click to expand...
Click to collapse
Before remapping, always try (if you haven't already done so) to go through a soft reset. Sometimes, they keys get "locked" because some program in WM is not responding...
BTW, which OS are you running?

i tried soft resetting still nothing happen its running on Windows Mobile 5. i could not Upgrade it to 6.1 because my lil bro killed the bootloader

try a hardreset n c what happens....or get some soft key manager n try with it...

Hbutton actually works pretty good. I used it a few times and it does a good job for the remapping. If you feel confident enough with the Registry, you can also do it that way.

egzthunder1 said:
Hbutton actually works pretty good. I used it a few times and it does a good job for the remapping. If you feel confident enough with the Registry, you can also do it that way.
Click to expand...
Click to collapse
okay im confident with Registry... as the guy above ur post said to hardreset well i cant hardreset cause i need the Call bottons. so what should i do in the registry??

kpshamilsagar said:
try a hardreset n c what happens....or get some soft key manager n try with it...
Click to expand...
Click to collapse
i cant hard reset without the DPad Working

ashburn said:
okay im confident with Registry... as the guy above ur post said to hardreset well i cant hardreset cause i need the Call bottons. so what should i do in the registry??
Click to expand...
Click to collapse
Can you flash with an original shipped rom? (you know, the RUU from the manufacturer) That normally requires no interaction with the device since the software automatically puts the device into bootloader. I will try to find the Registry keys. There was a good post with all that information a while back... I'll see if I can find it.

egzthunder1 said:
Can you flash with an original shipped rom? (you know, the RUU from the manufacturer) That normally requires no interaction with the device since the software automatically puts the device into bootloader. I will try to find the Registry keys. There was a good post with all that information a while back... I'll see if I can find it.
Click to expand...
Click to collapse
thank you very much. but i cant flash my lil bro apparently somehow killed the bootloader... only way to have bootloader back is to do it manually by opening the device but i wont want to do that lol his phone might just get worst..

ashburn said:
thank you very much. but i cant flash my lil bro apparently somehow killed the bootloader... only way to have bootloader back is to do it manually by opening the device but i wont want to do that lol his phone might just get worst..
Click to expand...
Click to collapse
I guess I should read a little more carefully since you mentioned this in an earlier post.
Look at this that I stumbled upon while browsing the Atom forums. Look at posts 214 thru 216. There is an app that is called resetbootloader.exe.... I guess this might be what you need.
http://forum.xda-developers.com/showthread.php?t=455827&highlight=bootloader&page=22
Let me know how it turns out...

egzthunder1 said:
I guess I should read a little more carefully since you mentioned this in an earlier post.
Look at this that I stumbled upon while browsing the Atom forums. Look at posts 214 thru 216. There is an app that is called resetbootloader.exe.... I guess this might be what you need.
http://forum.xda-developers.com/showthread.php?t=455827&highlight=bootloader&page=22
Let me know how it turns out...
Click to expand...
Click to collapse
nope its not working..... the bootloader on my lil bro atom is dead.... i cant get to bootloader.. maybe the best is the Registry thingy or is there any other way to remap hardreset botton instead of using the call & end call botton?

ashburn said:
nope its not working..... the bootloader on my lil bro atom is dead.... i cant get to bootloader.. maybe the best is the Registry thingy or is there any other way to remap hardreset botton instead of using the call & end call botton?
Click to expand...
Click to collapse
See if you can downgrade the bootloader by following this thread
http://forum.xda-developers.com/showthread.php?t=358704&highlight=downgrade+bootloader
First you [highlight]must[/highlight] make sure that this is for your phone. If it doesn't work, try to find a program called HButton (it can be found in the Dev and Hacking section), this will do the same thing as the Registry edits, but with a nice UI
Sorry but this is the limit of my knowledge... in theory, replacing the bootloader might fix what your little brother did, but then again, I am not certain since I do not own the device. Also, you may want to consider that the hardware buttons can be busted as well. Just a thought.
Good luck!

thanks again hehe it gave me alot of home lol but could not get it working. Maybe someone could give more solution on how to activate the DPads back lol hehe. The Problem Started when my Lil bro installed Touch Shell 3.0 thats what he said to me this morning... lol maybe some software aren't that friendly at all

those anyone know any apps that can do hardreset without using stylus & Dpad...??

ashburn said:
thanks again hehe it gave me alot of home lol but could not get it working. Maybe someone could give more solution on how to activate the DPads back lol hehe. The Problem Started when my Lil bro installed Touch Shell 3.0 thats what he said to me this morning... lol maybe some software aren't that friendly at all
Click to expand...
Click to collapse
I have used Touch Shell 3 (in a Blue Angel) and it shouldn't do anything like that (especially not busting your bootloader)... I have a feeling that your little brother is not telling you something or that his story is only half of what happened
As far as the "no stylus"... why not? I can understand that your DPad might not be working, but why not the stylus? If you lost it and need to reach the "Reset" button, just do what I do... use a paperclip (I have lost about 5 styluses and on the last one I said "screw it" )
One last suggestion, you could try to remove both battery and back up battery to clean the memory... I guess that would probably act as a hard reset for the device.

egzthunder1 said:
I have used Touch Shell 3 (in a Blue Angel) and it shouldn't do anything like that (especially not busting your bootloader)... I have a feeling that your little brother is not telling you something or that his story is only half of what happened
As far as the "no stylus"... why not? I can understand that your DPad might not be working, but why not the stylus? If you lost it and need to reach the "Reset" button, just do what I do... use a paperclip (I have lost about 5 styluses and on the last one I said "screw it" )
One last suggestion, you could try to remove both battery and back up battery to clean the memory... I guess that would probably act as a hard reset for the device.
Click to expand...
Click to collapse
hmmm good idea lol i did try reset using stylus but it resets but only thingy is the dpad..... hhehe removing battery is good but how do i remove backup battery??? can help me with it? lol kinda noobie.... he told me when i tried flashing..... it does not show bootloader but shows diagnose test i tried it myself it did not work and i looked upon this forum i need to dismental certain parts of the PDA

Stuck in bootloader-tricolor screen

So I decided to sell my Fuze to one of those online resellers. I flashed back to stock ROM and radio, both no problem. And to be sure, I decided to flash back to the original Hard SPL from my sd card. But I get an error and I can't get out of the tricolor screen and says upgrade ROM error, please retry.
I've tried soft reset, hard reset, taking out the battery. Nothing seems to work. So like me to go one step too far and screw up. I tried replacing the RAPHIMG.nbh file, but it says it is write protected. I can't even reformat the sdcard because it is write protected and I couldn't figure out how to un-write protect it.
I know everyone is going bonkers over WP7. But if anyone can find the time to tell me how to fix this, I would appreciate it.
Thanks in advance.

sad... no replies here to help you dr. jim. glad your phone started working again. i need to look into selling the two extra fuzes i have

deleted, cause not senseful..

norcal colby said:
sad... no replies here to help you dr. jim. glad your phone started working again. i need to look into selling the two extra fuzes i have
Click to expand...
Click to collapse
Try ibuyphones.com. They say the Fuze is worth $80, though we'll see what they actually pay me for it.

I was able to reflash the stock ROM and all is well now.
Case closed.

HTC Sensation 4G not finding Sim!

hello everyone,
having a huge problem... my HTC wont accept any sim cards...i even tried the original t-mobile card.. it just keeps saying no sim card in phone..
I unlocked the bootloader already;
attempted to use the android terminal, where i found the unlock code, but you cant even put it in, because the phone not asking you to put it in. (and yes i tried via settings > security )
still on my way to S-OFF, but I doubt it fixing the problem...since other persons faced similar problems whilest S
I tried *#*#4634#*#* > phone information, and tried to refresh the SMSC, and got a 'refresh error'....
Please can some1 help me?

squall_luffy said:
hello everyone,
having a huge problem... my HTC wont accept any sim cards...i even tried the original t-mobile card.. it just keeps saying no sim card in phone..
I unlocked the bootloader already;
attempted to use the android terminal, where i found the unlock code, but you cant even put it in, because the phone not asking you to put it in. (and yes i tried via settings > security )
still on my way to S-OFF, but I doubt it fixing the problem...since other persons faced similar problems whilest S
I tried *#*#4634#*#* > phone information, and tried to refresh the SMSC, and got a 'refresh error'....
Please can some1 help me?
Click to expand...
Click to collapse
I had the same issue. Try putting two pieces of tape on the back of the sim card. Sometimes its because the sim-tray is a little loose. Don't put more than two! (I tried four and it was almost stuck in there!).

tempaznx said:
I had the same issue. Try putting two pieces of tape on the back of the sim card. Sometimes its because the sim-tray is a little loose. Don't put more than two! (I tried four and it was almost stuck in there!).
Click to expand...
Click to collapse
two pieces of tape?? on back of sim card? I dont understand...

squall_luffy said:
two pieces of tape?? on back of sim card? I dont understand...
Click to expand...
Click to collapse
Just grab your sim card, put some tape on it (the side without contacts) and then put it back in the phone. This should push the card harder onto the contacts, making a better connection.

squall_luffy said:
two pieces of tape?? on back of sim card? I dont understand...
Click to expand...
Click to collapse
I think I got it now, but the phone still not reading the sim... :'(

squall_luffy said:
I think I got it now, but the phone still not reading the sim... :'(
Click to expand...
Click to collapse
still not reading any SIM whats so ever.... plz help me.
was trying to do the S-OFF, and look what kind of error I got: