Hi,
before flashing my spv e650 with the rom version 1.34.406, I dump the Original OS and now I've got three files - part00.raw,part01.raw,part02.raw - but now, I want to make the nbh file to purpose to the communauty.
I follow this wiki http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
but i don't succeed.
This is that I did in the cmd windows
1 - prepare_imgfs.exe Part02.raw -nosplit
2 - viewimgfs.exe imgfs_raw_data.bin
3 - buildimgfs.exe imgfs_raw_data.bin
4 - nbhextract ruu_signed.nbh
5 - make_imgfs.exe 04_OS.nb -nosplit
In the HTCRT, I selected options as the picture.
My matter is that the files created is the same as the ruu_signed.nbh source.
If somebody can explain as I must do. Thanks
First of all this is not an Elf, but a Vox, so look at the Vox Wiki!
Then in HTCRT you have to select Excalibur to build a Vox ROM!
In my first experience, I follow the vox wiki but the execute of pkgtool.exe on the dump folder generate a error and the program stops!
So that the reason which I follow this wiki http://wiki.xda-developers.com/index...f_HowtoDumpRom
I retried the pkgtool.
Thanks for your answer
Hello, I followed this tutorial to get a dump of my pharos original rom
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
I used the correct dump addresses for pharos in pdocreat and I got the raw files. But I need to flash it, I need the .nbh file to flash whit RUU, how can I convert the raw files to it?
Thanks
I've done a bit more. I used
prepare_imgfs Part02.raw -nosplit
and then
viewimgfs imgfs_raw_data.bin
And the raw was extracted. But when I use buildimgfs, it gives an error in waveapi.dll and stops, so I can't continue.
Anybody knows how to do it?
EDIT: I tried it on another PC and I could do it
First I used prepare_imgfs, then viewimgfs and then buildimgfs.
I use make_imgfs to rebuild the nb file and then htcrt tool included in DIY chicken.
I flash it to the pharos. It install ok, but when the installation finishes, the pda restarts and it hangs up in the bootsplash screen.
Any ideas?
jose_sonseca said:
I've done a bit more. I used
prepare_imgfs Part02.raw -nosplit
and then
viewimgfs imgfs_raw_data.bin
And the raw was extracted...
Anybody knows how to do it?
Click to expand...
Click to collapse
ok, stop here. Now run "dmp2pkg dump"; this command creates the two folders "SYS" and "OEM". When the process is completed browse into these folders, you should have all the OS files in package format. At this point you can delete dump folder and imgfs_raw_data.bin (if you want)
Download:
Pharos ROM Kitchen Tool by suracha
Pharos Official WWE ROM
NBHExtract by pof
Extract Pharos Kitchen tool in some place (eg. \Pharos\DIY)
Go to "\Pharos\DIY\Build" and rename "OEM" and "SYS" folder to "OEM.old", "SYS.old".
Copy your originals "OEM" and "SYS" folders to "\Pharos\DIY\Build" and leave it there...
Now you need the OS.nb from the official ROM. This file is inside RUU_signed.nbh.
.
Right click on RUU_Pharos_DOPODASIA_WWE_1.11.707.1_4.1.13.59_03.15.90_BLUE_Ship.exe that you have downloaded and choose "Open with WinRAR" or "Winzip --> Open with winzip" and extract RUU_Signed.nbh in some place, put NBHExtract.exe in the same place.
Open an MS-DOS window here and run "nbhextract ruu_signed.nbh".
Some files will be extracted:
D:\Pharos>nbhextract ruu_signed.nbh
=== NBHextract v1.0
=== Extract contents from HTC NBH files
=== (c)2007 xda-developers.com
=== by: pof & TheBlasphemer based on itsme per
Device: PHAR10000
CID: HTC__023
Version: 1.11.707.1
Language: USA
Extracting: 00_GSM.nb
Extracting: 01_IPL.nb
Extracting: 02_SPL.nb
Extracting: 03_MainSplash.nb
Encoding: 03_MainSplash.bmp
Extracting: 04_OS.nb
D:\Pharos>
.
Copy 04_OS.nb in "\Pharos\DIY\Build\ROM" folder and rename it to OS.nb.
Go to "OEM.old" folder and copy "OEMXIPKERNEL" folder to "OEM" folder.
Go to "SYS.old" folder and copy "MSXIPKernel" and "MSXIPKernelLTK" folders to "SYS" folder.
.
OK at this point you can build your ROM.
.
Go to DIY folder, double click on "1.BuildOS.bat" and start the process by clicking green arrow.
When done close BuildOS and launch "2.CreateOS.bat".
When done launch "3.htcROMTool.bat".
If its all ok you should have ruu_signed.nbh in "\Pharos\DIY\flash" folder, just run "ROMUpdateUtility.exe" and update your device.
Note that your device must have HardSPL patch for flash this ROM
bye
If my ROM is CHT after dump rom and follow your procedure to have nbh, the rom is still CHT or change to WWE?
poldo964, thanks a lot, I did it, but after flashing it, it hangs up in the bootsplash screen, now I'm reflashing your rom.
I'll retry al the steps with a fresh DIY installation, but I cannot do it until this sunday, then I'll tell you if it works. I finally I do it, I'll upload it here.
thanks
bye
ansonwefong said:
If my ROM is CHT after dump rom and follow your procedure to have nbh, the rom is still CHT or change to WWE?
Click to expand...
Click to collapse
CHT of course
jose_sonseca said:
poldo964, thanks a lot, I did it, but after flashing it, it hangs up in the bootsplash screen, now I'm reflashing your rom.
I'll retry al the steps with a fresh DIY installation, but I cannot do it until this sunday, then I'll tell you if it works. I finally I do it, I'll upload it here.
thanks
bye
Click to expand...
Click to collapse
ok, I suggest you to delete ruu_sighed.nbh in "\DIY\flash" folder and OS.nb in "\DIY\Build" folder before creating a new ROM.
Good idea to make an archive with all original ROM dumped
This is mine:
Pharos WM6.0 ITA Original ROM Dumped
bye
The entire process
I used the tools folder from this elf rom dump wiki page
Download "various tools"
Extract in C:\tools
--------------------------------------------------
prepare_imgfs Part02.raw -nosplit
Code:
C:\itsutils>prepare_imgfs Part02.raw -nosplit
Searching for IMGFS start... Found at 00000000
Dumping IMGFS ...
Done!
--------------------------------------------------
viewimgfs imgfs_raw_data.bin
too many text to paste here...
--------------------------------------------------
dmp2pkg dump
I got the dmp2pkg tool from scoter kitchen (dmp2pkg.exe & pkgcommon.dll)
This tool doesn't print any info on cmd. It creates a file called missing.txt on dump dir. It contains
Code:
SPLASHPackage
SPLASH (File)
HTCRSVPackage
HTCRSV (File)
SLockPackage
SLOCK (File)
GSMDATAPackage
GSMDATA (File)
MFGDATAPackage
MFGDATA (File)
SUNLOCKkPackage
SUNLOCK (File)
HTCLOGOPackage
HTCLOGO (File)
GSMCODEPackage
GSMCODE (File)
I got the two folders on dump, sys and oem.
--------------------------------------------------
Now I extracted the DIY kitchen to a new folder and I did steps 2 & 3
poldo964 said:
# Extract Pharos Kitchen tool in some place (eg. \Pharos\DIY)
# Go to "\Pharos\DIY\Build" and rename "OEM" and "SYS" folder to "OEM.old", "SYS.old".
# Copy your originals "OEM" and "SYS" folders to "\Pharos\DIY\Build" and leave it there...
Click to expand...
Click to collapse
--------------------------------------------------
STEP 4&5:
poldo964 said:
# Now you need the OS.nb from the official ROM. This file is inside RUU_signed.nbh.
.
# Right click on RUU_Pharos_DOPODASIA_WWE_1.11.707.1_4.1.13.59_03.1 5.90_BLUE_Ship.exe that you have downloaded and choose "Open with WinRAR" or "Winzip --> Open with winzip" and extract RUU_Signed.nbh in some place, put NBHExtract.exe in the same place.
# Open an MS-DOS window here and run "nbhextract ruu_signed.nbh".
Click to expand...
Click to collapse
nbhextract
Code:
C:\Pharos\org>nbhextract ruu_signed.nbh
=== NBHextract v1.0
=== Extract contents from HTC NBH files
=== (c)2007 xda-developers.com
=== by: pof & TheBlasphemer based on itsme perl scripts
Device: PHAR10000
CID: HTC__023
Version: 1.11.707.1
Language: USA
Extracting: 00_GSM.nb
Extracting: 01_IPL.nb
Extracting: 02_SPL.nb
Extracting: 03_MainSplash.nb
Encoding: 03_MainSplash.bmp
Extracting: 04_OS.nb
The MD5 checksum of 04_OS.nb is D15A41631534AED76F212939C9E7D9C5
--------------------------------------------------
STEPS 6,7 & 8 done.
poldo964 said:
# Copy 04_OS.nb in "\Pharos\DIY\Build\ROM" folder and rename it to OS.nb.
# Go to "OEM.old" folder and copy "OEMXIPKERNEL" folder to "OEM" folder.
# Go to "SYS.old" folder and copy "MSXIPKernel" and "MSXIPKernelLTK" folders to "SYS" folder.
Click to expand...
Click to collapse
--------------------------------------------------
1.BuildOS.bat
Click on green arrow, it starts processing the rom folders. Some time later, it shows "done" on status bar. I closed it manually.
--------------------------------------------------
2.CreateOS.bat
It starts imgfsfromnb, extracts a lot of files and processes them.
It finishes with "done"
......
Processing "_sympad0409.txt" as file
Total Sectors: 0x24400
ImgfsToNb 2.0 RC 2
Done!
Patch OS.nb
Warning: OS.nb size will be patched from 0x4ee6000 to 0x632d000 bytes.
Done
Click to expand...
Click to collapse
--------------------------------------------------
3.htcROMTool.bat
Done without errors.
--------------------------------------------------
I flashed it. It restarted, but took too many time in bootsplash, but finally WORKED. I used an original splasboot image to remove the DIY kitchen image.
FILES
Original RAW file:
http://www.megaupload.com/?d=DR5H6XXM
Original splashboot "smart mobility" (found in pdamobiz):
http://www.megaupload.com/?d=1V19R0GK
http://rapidshare.com/files/135024793/Splash_Original.rar
Original Spanish ROM:
WM6.0 CE OS 5.2.1944
ROM version: 1.11.412.1 ESN
ROM date: 01/29/08
http://rapidshare.com/files/135355262/HTC_Pharos_Original_WM6.0_ROM_ESN.zip
poldo964, thanks a lot for your help, I’m grateful to you
jose_sonseca said:
.
.
.
I flashed it. It restarted, but took too many time in bootsplash, but finally WORKED. I used an original splasboot image to remove the DIY kitchen image.
.
.
.
Click to expand...
Click to collapse
well done sonseca
ROM uploaded finally
http://rapidshare.com/files/135355262/HTC_Pharos_Original_WM6.0_ROM_ESN.zip
Hi
I have some question.
I will receive my pharos next tuesday, and I'd like to create a dump.
So, i must extract .raw file using the tools, as discribe is this wiki : http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
but, I don't understand what I must do next... I just want to create nbh file, without modification/kitchen... it is for backup! and so, I think i don't need do follow your entire process.
What I must do? fallowing the Elf wiki? But HTCromtool (in TOOLS.zip) doesn't include Pharos device.
I'm totally lost... (i'm Newbie in ppc)
Note that my backup will be a fuul backup, with radio/spl/ipl....
thanks for the help
Download the tools from the elf wiki.
You can get the raw file using this command
pdocread -w -d DSK1: -p Part02 0 0x5cc7000 part02.raw
Before using it, connect your pda throught activesync. Then execute it. If you get an error saying "application locked", you have to modify the pda registry
Code:
HKLM\Security\Policies\Policies
valuename '00001001' was set to dword:2, change it to dword:1
dword: any thing other than 1 disallows unsigned
dword: 1 allows unsigned
Your pda will ask you to execute some unsigned dll, allow it. The process take a while, so you have to wait.
When you have your raw file, then do the steps posted in this thread.
bye
why you extract only part02? we don't need to dump part00, partO1 abd part00 disk2 like this thread shown : http://forum.xda-developers.com/showthread.php?p=2118508
Teckynou said:
why you extract only part02? we don't need to dump part00, partO1 abd part00 disk2 like this thread shown : http://forum.xda-developers.com/showthread.php?p=2118508
Click to expand...
Click to collapse
You only need the part02 to backup your OS rom. Then you can build the rom from it. What's your pharos' language?
Cooked ROMs usually don't write SPL, IPL or radio.
jose_sonseca said:
I've done a bit more. I used
prepare_imgfs Part02.raw -nosplit
and then
viewimgfs imgfs_raw_data.bin
And the raw was extracted. But when I use buildimgfs, it gives an error in waveapi.dll and stops, so I can't continue.
Anybody knows how to do it?
EDIT: I tried it on another PC and I could do it
First I used prepare_imgfs, then viewimgfs and then buildimgfs.
I use make_imgfs to rebuild the nb file and then htcrt tool included in DIY chicken.
I flash it to the pharos. It install ok, but when the installation finishes, the pda restarts and it hangs up in the bootsplash screen.
Any ideas?
Click to expand...
Click to collapse
Hi, I just noticed you fixed your problem, but there is an easier solution.. You just had to skip 2 steps in the procedure described in that wiki. Here's my explanation:
http://forum.xda-developers.com/showpost.php?p=2522427&postcount=138
right i know i will get no help .... but ill still try
im trying to unpack an artemis os.nb.
but im stuck at the stage where i have a dump dir.
i cant get it into a sys and oem folder. tried everything i can think of.
but it seems that both package tool wont work, and also DMP2PKG.exe wont work.
strange thing is i extracted my pharos os with it, but probably deleted the file (dmp2pkg) i got a strange unreg notification, that it was known but regsrv32 couldnt find the "entrance" or something.
anyone know how to solve this?
Hi everyone!
I'm asking for a fix!
I did the conversion of files for all existing tutorials and it doesn't work!
Procedure:
========
1) Downloaded at LG sources my original Firmware: V10B_00.KDZ
2) Extract .CAB files by LG Utils, Extract with Winrar the dz.file, Extract files by DzDecrypt
Now I used CYGWIN Linux apps emulator:
===============================
3) Used unmbn to generate zImage_Ramdisk.mbn.new
4) Extract all system files with unyaffsmbn
Note: a error happens when i try to extract APKs: "invalid CEN header (bad signature)", All other system files are ok!
What i should do?
Note2: Can someone convert this files for me without errors?
h t t p ://csmg.lgmobile.com:9002 /swdata /WEBSW /GW620f /ABTMBK /V10b_00 /V10B_00.kdz
Thanks!
No one can help me?
Thks!
i know the process is right, but why only in gw620 the process doesn't work?
HERE IS A GUIDE FOR YOU ALL YOU CAN CREATE YOUR OWN ROM BY THIS SEXY METHOD.I AM NOT RESPONSIBLE FOR BRICKED DEVICES,DAMAGED DEVICES IF YOU BLAME ME I WILL LAUGH AT U.
Click to expand...
Click to collapse
Requirement to make a custom rom
*java jdk installed on your pc
*windows xp or 7.
*package given in download section
Who is this kitchen for ?
Those who are brand new to
creating custom ROMs and
want an easy place to start
learning
Those who just want to modify
shipped ROMs or someone
else's custom ROMs to their
liking
Those who are confused by all
those scripts and complex
commands required for
building and extracting
This is NOT a tool to
automatically turn you into a
full-fledged ROM developer.
ROM development normally
involves work from the ground
up and involves time , research
and patience .
Click to expand...
Click to collapse
PRESS THANKS IF YOU LIKE MY WORK
Kitchen setup guide
setting up android kitchen
1.download all the three link and unzip kitchen.rar and cywin package.
2.open cywin_package then open folder Now, you can see 3 icons, a read-
me,a setup, and a folder. Choose
the setup. Here You will choose
install from local directory. Next,
Navigate to the the folder of
extraction of cygwin and choose
the folder Cygwin_packages inside
the cygwin extraction folder. Wait
for some time. Then, You will come
across a list of file. Click the 2-
circle-arrows,untill, it displays
“install”
After the procedure is complete,
run the batch file cygwin.bat . Now, minimise
it and copy kitchen folder,
Keep it in some location where you have installed your cygwin package open home/ajay-Pc(in my case this is administrator name of my pc)kitchen
Now, open the batch file window
and type
cd C:\Kitchen
Wait for some time and then when
the location the changed, type
./menu
Click to expand...
Click to collapse
PRESS THANKS IF YOU LIKE MY WORK
GUIDE
now minimize the batch file and extract official rom and open pda there you will find system.img then extract it using magic iso or flash
the official stock rom using odin the take a nandroid backup u will get system.rfs.tar in your sd card extract it using magic iso then make a folder in called rom and open it. again create a folder called system and copy all data from system.rfs.tar which u have extracted(do drag and dropping).
Now copy meta-inf of any stock rom and copy and kernel to rom folder.
Now you will get two folder and one file in your rom folder zip the folder content and copy the file where you have installed cygwin/home/ajay/kitchen/original update folder.
now open command shell which you have minimized 1st create working folder then add root permission,deodex your rom.
and at last press 99 to build your rom..
note-if it ask you to change updater script to update script change it but dont forget to change it back to updater script.now you will get your rom in output folder copy it to your sd card flash it if error occur unzip the zip file and delete meta-inf and boot.img and again copy meta-inf of any rom and kernel to it and zip it..again flash the rom..
PRESS THANKS IF YOU LIKE MY WORK
Downloads
Downloads
Link for cygwin click here :good:link for kitchen click here :good:link for magic iso click here :good:
PRESS THANKS IF YOU LIKE MY WORK
CREDIT
credits
xda
dev of kitchen DSIXDA
me for boring guide
PRESS THANKS IF YOU LIKE MY WORK
gd 1 but think theirs many guide to teach how to cook rom from kitchen
amanmehta007 said:
gd 1 but think theirs many guide to teach how to cook rom from kitchen
Click to expand...
Click to collapse
many user asked for my help so i created this for them
gd
THE DEV OF KITCHEN IS DSIXDA U SHOULD MENTION HER NAME
bY
------------------------------------------------------------------------------SOMKLL---------------------------------------------------------------------------------------------------
Yes
yes i m Flasholic
I already have a guide for this.
Sent from my GT-S5360 using XDA
I just finished an update to my flashing script, now it will work with payload.bin and unpacked payload files.
Currently, only gsi_sdm660_64 models are available for this option.
And Windows only, too.
PLEASE ENSURE YOUR PHONE HAS UNLOCKED BOOTLOADER, OTHERWISE THIS GUIDE IS USELESS.
Let me introduce you how to use the new script:
DL: https://github.com/HikariCalyx/OSTRemote/releases
source: https://github.com/HikariCalyx/OSTR...Script/generic_flash_script_gsi_sdm660_64.bat
If you use unpacked nb0 extension stock firmware as before, please follow this guide:
https://forum.xda-developers.com/nokia-7-plus/how-to/guide-workaround-flashing-sparse-t3906070
Click to expand...
Click to collapse
1. You must have Python 3 installed. It can be downloaded from https://www.python.org/downloads/
2. Extract the payload.bin from full OTA package (e.g. March 2019 update known as B2N-351F-0-00WW-B04)
3. Put the script file (and required files if you prefer original script source) and the payload.bin altogether
4. Download payload_dumper.py and update_metadata_pb2.py from the URL given by the script, and place them to the same directory of the script.
5. Type lowercase "yes" (without quotes) and press Enter, wait for the procedure complete.
6. The script will dump the payload.bin and process both system and vendor image to flashable sparse image.
7. After that, you should know what to do next.
If you already have dumped payload and converted system.img / vendor.img, the script will tell you if you want to flash the unpacked OTA packages, you can simply type "yes" and proceed.
You needn't to waste the time of processing payload.bin again, once you don't delete them.
I'm considering port this script to universal for almost every A/B Android devices, if it works great.
Nice job dude, this will be very useful to many people.
Very well Hikari, nice script
Very very much appreciated work!
Can't wait to try it out!
Thanks !
Mod edit - Translated by Google Translate:
Very supportive! !! !!
*********************
非常支持！！！
does this work for other Nokia models? Such as 3.2?