I want to run an application (in windows) every time I plug my Hermes into my computer. Anyone have ideas?
Later, Lew
i think you can do that using Mortscript, also using WM5 API
Is there anyone who knows how to ?
you can use G-profile (www.ageye.de) to do that
Related
So i have this program combined with this GPS aerial. However it would appear they have had a fight and will not communicate! Well to be honest i am unable to open a Com port according to the program...
This is from the site:
I think I know the correct port and speed, but trying to connect always yield's "Failed to open COM Port."
The access to a COM-port is mutual exclusive which means, that only one program may have access to the receiver at once.
If you are using TomTom, please try the following:
On the PocketPC, uninstall the TomTom ~GPS application (that and only that one)
Don't do it via the PC, do it on the PDA directly
The uninstall routine will ask for a soft reset. After that, everything (including TomTom) will work
Most probably another program or driver is blocking the port.
Click to expand...
Click to collapse
Now - this and Pocket Informant are the only 2 programs i ahve had running and also the only ones on my XDA after my Hard Resset last night
What is the problem and how do i fix it? Has anyone else had this issue - i have looked under their Success page for those with problems like mine but i cant find my combination or anyhting close
Also Oziexplorer was working with it up until i hard-resetted it so i know that the GPS works.
Com port
Had the same problem.
Disconnect the IR which is using the comport. Got to the connections setup and disable.
Directly after this has been done TomTom finds the GPS.
Rien
Absolute freaking legend...
Immediately after shutting the infrared off it switched on - it must block the com port from anything going in then...
So the big question remains - Why was Oziexplorer working with it?
Dopod M700
Same problem with my Dopod M700 + GPS Receiver + OziExplorer.
Where will we find another port to close it?
uncheck
"receive all incoming beams"
in network
can i sync my xda2i and powerbook, tried to download activesync from microsoft on my mac, but it did'nt do anything.. don't know why
?
any ideas
activesync is a Windows program not an OS X program
If you want to sync the two you will need either a program called PocketMac or a program called MissingSync. Both are extremely buggy, are considerably expensive, have awful support, and can't do a fraction of the things that ActiveSync can.
I personally would only advise trying to sync a mac with a Pocket PC if you have the necessary tech skill, but others may disagree.
Personally I use MissingSync, which does the job but not reliably. [/url]
Has anyone been able to get ActiveSync to install in Virtual PC? On mine (VPC 7, Windows 2000) it always dies at 92% installed, and just stays there indefinitely (left it all night).
Well, just got hold of the Blackberry Connect Client V4 and installed in on Windows MObile 6. Install is fairly slow, but gets there in the end. Took a while for the BES to send all my messages across, but calendar, contacts and notes syncing is working well. Less painful than the HEX edits etc that people use to get older versions working.
Oddly the device now turns itself off when power gets below 30% - maybe theres a way to change this. Alos, due to my corporate IT policy I don't see a blackberry browser in the blackberry software. Anyone know how or if its possible to install one? Apparently with V4 you can use the MDS server for mobile data as with the blackberry device.
BTW, got the client, desktop manager and manuals etc from http://www.sems.org/entry.asp?ENTRY_ID=225
Now if I could just get MDS working ...
Guru Meditation said:
Well, just got hold of the Blackberry Connect Client V4 and installed in on Windows MObile 6. Install is fairly slow, but gets there in the end. Took a while for the BES to send all my messages across, but calendar, contacts and notes syncing is working well. Less painful than the HEX edits etc that people use to get older versions working.
Oddly the device now turns itself off when power gets below 30% - maybe theres a way to change this. Alos, due to my corporate IT policy I don't see a blackberry browser in the blackberry software. Anyone know how or if its possible to install one? Apparently with V4 you can use the MDS server for mobile data as with the blackberry device.
BTW, got the client, desktop manager and manuals etc from http://www.sems.org/entry.asp?ENTRY_ID=225
Now if I could just get MDS working ...
Click to expand...
Click to collapse
Hi, which version of WM6 did you use? Also, have you got MDS working yet?
Hi,
I tried bb connect 4 on WM6, Laurentius WM6 Pro Business Release V7
it didn't work...
somebody knows how to run BB connect??
thx
blackberry connect WM5
Wondering anyone got luck getting bb connect to work on HP IPAQ hw6955?
I have tried few bb connect version but none of them worked it is stuk in Pin Pending. Anyone knows of a fix or knows if HP been test please let me know.
Thanks in advance
BB Connect - Desktop won't connect to device
I was trying to get my Universal to connect to the Blackberry Connect Desktop for Window Mobile Devices. I followed the install guide and from what I can tell it seems like active sync is still blocking the device from talking to the blackberry software. When I disable the USB connect option in activesync the device cannot be seen from the laptop at all.
I am using BB desktop software is 4.0.0.17 and BB connect software on device is 4.0.0.67. Active sync is 4.5
My understanding is you has to activate using the desktop method and it can not be done wirelessly. I did try wirelessly and I get Service: "not connected".
Any help or ideas are appreciated.
Blackberry Desktop Manager USB Driver
Wrong forum, sorry
on some devices you have to go into the registry and change the AKU to 0.4.2 can someone verify I am scheduled to pick up a Universal this week and need bbconnect capability
Does anyone know of a program that will display ur today screen on ur computer...like a virtual dashboard? i broke my screen on my kaiser yesterday and I am waiting on my replacement, but i have some emails that i need to read... anyone know of a program like this?
ActiveSync Remote Display. You sync your phone with the computer, run ActiveSync Remote Display on the computer, and it will display the contents of the screen. It's how a lot of people get screenshots of what is on their phone. Special installation instructions for WM6.
http://forum.xda-developers.com/show...53&postcount=5
http://www.microsoft.com/downloads/d...8-6A2B006EDFE9
Thanks, but I found a program called MyMobiler .. works really good... and works with Vista
I use MyMobiler also, works good.
works great, especially since you can launch it from the desktop. No need to do anything on the PPC.
Wireless data connection not active...
There is one issue with ActiveSync Remote Display and Mobiler. Because they both use Activesync, once the WM6 device is connected via Activesync, the wireless data capability of the WM6 device stops because the WM6 device begins to use the internet data connection on the PC.
Is there a workaround so that the WM6 keeps it's wireless data connection active when connected back to the PC/laptop and yet still enables me to control the WM6 device using my laptops display/keyboard/mouse?
Ultimately, I would like the WM6 device to run a virtual display program (similar to what Nyditot use to offer) so that I can run at 800x600 and use my laptop to control the WM6 device.
Why would I want to do this? Because I have an fixed $ rate unlimited data plan that is unlimited only if data terminates/initiates from my WM6 device.
Hey all
I have driven over my S710 last year, and brick my screen...
now i hope i can display my screen on my laptop.
I have connected my S710 to the PC by datacable.
and running powertool of microsoft...
but it tells unknown processor/os...
Anyone knows an way to show the screen of my S710 on my windows XP pro SP3 pc?
i hope anyone can give me the answer so i can use my phone to know who calls...
greets,
Mark
Try mymobiler :
http://www.mymobiler.com/
Bye.
It had to install automaticly on my mobile isnt it ?
i tryed to install... but it wont do it on my phone...
i could use my pincode to login, it is connected to my provider, also to my active sync, but cant get any display on my pc, because it doesnt install mymobiler on my vox...
can anyone help me with it
If you launch MyMobiler on your pc, if your phone is connected with activesync, and a partnership installed, MyMobiler installs a cab automatically on your Vox.
But, if you have to press "ok button" on your Vox to confirm install, try to push left soft key menu to agree install.
Try it, i don't know if it will work.
Bye.
Otherwise, you could use the remote tools of Visual Studio 2008! Although I guess it's going to be a huge download! lol
Use mDesktop....it works without installiing anything on the phone...
WindowsMobilePowerToys allows you to control your device from your desktop.
Its free, you can download it overhere:
http://www.microsoft.com/downloads/...D6-1DCC-47AA-AB28-6A2B006EDFE9&displaylang=en
I will also second using MyMobiler. I'm sure somebody here can guide you through the installation on the device. It will install the CAB through AS like stated, then all you have to do is select the installation media and hit "Ok" a few times.
I no longer have my Vox, but somebody here can install it and write down the steps for you.