Does anyone know what should I do to be able to surf the net with my new O2 XDAIIs?
At university we have a free wi-fi access, but when I tried to use it the device detect the network and says that it is connected but if I type a web address it say it cannot find the page, do you know why?
I really know to discover if this device is usefull or not before the 14 days i have to refuse the contract expires, you know a lot of money and I do not want to waste it!
sounds very much like their DHCP dont give you an dns server
or that your device have hardcoded a dns server which it dont use
or maybe some firewall or gateway settings
it very much depend on how all your connection settings are set
and how they have setup their wifi network
How do you change this or check this out? I have the same problem. Im a total noob at network stuff.
Hi
I have a problem to connect via wifi to a proxy use server with username and password.I
use my proxy username and password but internet explorer can't open any page
is there any specific setting to use proxy work networks?
I've got the same problem with my school network.
I'm afraid it's not possible, but if somebody knows a working solution, tell us
Proxy on Work
I have got the same problem/error in my work.
Anyone how can give us some help will be high appreciated.
Thanks
Pan
me got the same prob in my college i can conect to the network login in the network in the cyberroam client but cant visit any page...
This phone is bugging me. ill be home, where I have low/no service, ill try to connect to wifi, but the phone will try to connect to gprs/3g. then sometimes ill have service and it wont connect at all. IE will work but not opera or some other programs. WIFI is searching 24/7 telling when theres a connection. anyone else have this problem?
I want to leave wifi on but only connect to networks registered.
I want if there's no 3g connect to wifi if available.
seems simple to me. possible? maybe i need to change some settings?
There is "no data" but that don't really solve the problem.
I have expereinced the same, especialy if I have low signal then the gprs/3g connections starts up.
It would be neat with an application that gave you a pop up where you had to confirm that you want to connect thru anything other than wifi or bluetooth.
I have the nodata program on my phone and it works great. Search the forum for the program and if you cant find it tell me and I'll attach the .cab
jaszek said:
I have the nodata program on my phone and it works great. Search the forum for the program and if you cant find it tell me and I'll attach the .cab
Click to expand...
Click to collapse
whats the program do
http://letmegooglethatforyou.com/?q=nodata+pocketpc
aonavy said:
whats the program do
Click to expand...
Click to collapse
NoData is probably not what you're looking for. It will allow you to disable traffic through a selected data connection. But it must be enabled / disabled manually. Sounds like you're looking for something that will toggle automatically, giving priority / preference to your WiFi connection when it's available.
There's a program called CommMgrPro that will do what you're looking for. That is, enable and disable connections based on things like cell tower location, detection of WiFi, etc. There's also a forum page for the program here.
A program called Bandswitch (at the same site as CommMgr Pro) will do similar to NoData, except it will let you choose enable / disable based on Time of day presets.
Also here in the forum you can find a program called WifiLocations. It will do similar to the first program above above. If you search the forum there are a few more (some free) programs that will do what you're looking for. Good luck!
My problem with the nodata program is that I can't seem to disable gprs/3g traffic while using wifi. It might be that I have an old version, but I have found many times that even with nodata running in the background with disabled data traffic, it still connects me if I loose my wifi connection.
hotmail said:
NoData is probably not what you're looking for. It will allow you to disable traffic through a selected data connection. But it must be enabled / disabled manually. Sounds like you're looking for something that will toggle automatically, giving priority / preference to your WiFi connection when it's available.
There's a program called CommMgrPro that will do what you're looking for. That is, enable and disable connections based on things like cell tower location, detection of WiFi, etc. There's also a forum page for the program here.
A program called Bandswitch (at the same site as CommMgr Pro) will do similar to NoData, except it will let you choose enable / disable based on Time of day presets.
Also here in the forum you can find a program called WifiLocations. It will do similar to the first program above above. If you search the forum there are a few more (some free) programs that will do what you're looking for. Good luck!
Click to expand...
Click to collapse
thank you very much for the info. I think I sorta fixed it pretty well on my own.Still need the toggle off and on though.
I hard resetted it with out the bloat. then configured my interenet like this:
http://forums.wireless.att.com/cng/board/message?board.id=cingular&message.id=110811
then i went to sounds/notifications in settings, i think, and disabled the wifi notification.
seems to work pretty well.
i take back what i said.it goes in and out. I had 3g service and it said I was connected to media net, but it wouldnt let me get to the net. this phone is a pain when it comes to internet and gps
what do you guys have for internet settings under start>settings>connections>connections>advanced>select network
what setup do i use in the first in the first box and the which setup in the second.
mine 1st media net
2nd my work network (whatever that is)
aonavy said:
i take back what i said.it goes in and out. I had 3g service and it said I was connected to media net, but it wouldnt let me get to the net. this phone is a pain when it comes to internet and gps
Click to expand...
Click to collapse
Edit your MEdiaNet connection settings so your proxy is DISABLED. If it is enabled your WiFi will try to use it too - which is not possible. Unchecking the proxy will have have no discernible impact to your browsing speed when you are using the AT&T data connection.
aonavy said:
what do you guys have for internet settings under start>settings>connections>connections>advanced>select network
what setup do i use in the first in the first box and the which setup in the second.
mine 1st media net
2nd my work network (whatever that is)
Click to expand...
Click to collapse
You can safely set both to MEdiaNet. If you have WiFi enabled and you're connected to your access point it will take precedent over your GPRS (Edge) or UMTS (3G) connection. It is not necessary to disable the AT&T data connection if you are connected and browsing over your WiFi connection. As soon as you turn off or lose your WiFi signal, your phone will go back to using the AT&T data connection.
hotmail said:
Edit your MEdiaNet connection settings so your proxy is DISABLED. If it is enabled your WiFi will try to use it too - which is not possible. Unchecking the proxy will have have no discernible impact to your browsing speed when you are using the AT&T data connection.
You can safely set both to MEdiaNet. If you have WiFi enabled and you're connected to your access point it will take precedent over your GPRS (Edge) or UMTS (3G) connection. It is not necessary to disable the AT&T data connection if you are connected and browsing over your WiFi connection. As soon as you turn off or lose your WiFi signal, your phone will go back to using the AT&T data connection.
Click to expand...
Click to collapse
okay..thanks for the post.
set media net for both and disable proxy and I should be okay correct?
2 questions:
how do I disable the the proxy? delete wap.cingular from the settings? click disable proxy icon?
also i heard if you have one of these disable you cant use your mms?
up up up and away...
I cant seem to connect to my office network because we are working behind a proxy and the G1 does not allow to enter a Proxy name!!!!
is there a way to enter a proxy name and port number in the browser or in the system. It can be done for APN but not WiFi!!!
Any suggestions!!!!
Hi Shobbow
I noticed this too, since i was trying to run all my traffic through a secure tunnel to my home computer.
I believe you need to use something like this
http://forum.xda-developers.com/showthread.php?t=447230
hopefully the route application should be able to route all traffic?
Let me know how you get on since this would be interesting if you can do it
~DF
Finally an application for Proxy Setting
check the market or check
http://www.parso.co.uk/proxysetting
I need some assistance on setting up VPN access to my corporate network on my X 7510. I am technologically barely savvy. I am a business user of my X 7510.
Can someone please help me in configuring my device to access my corporate VPN?
The following describes my attempts to configure the VPN settings using the standard VPN configuration available on the device:
I am using the settings given by my network team. We are using a pre-shared key and no certificates. Our corporate VPN uses CISCO ASA 5520. When I setup the VPN there is an "Advanced" option that asks for certain server IP addresses. Our network team says that this need not be used.
I am trying to connect over a GPRS network. The most frustrating part is that the IT Manager uses an iPhone and he downloaded a VPN client for 9 dollars from the Apple Store and it works beautifully !!!
But I am not able to connect and I get an error message that says that there is a problem with my user name and password. The message asks me to turn off and turn on my device to see if that fixes my problem. But it does not.
I have triple checked all the setting details with our network team and all the data are correct. My network team can monitor connection attempts and they say that they are not even able to see any connection atempts from my device.
Can somone please help me?
I Think it depends on the rom you use. If that vpn package is there.
I also have a problem with my VPN on x7510. I think I get all the settings right because it says I am connected to my corporate network. Our network administrator from the network monitoring desk actually sees me connected. But I cannot access any application on the network, not even my company's intranet homepage.
Another irritating part is that when I fire up any application that requires internet access but not VPN - like Nimbuzz, the VPN starts to connect through GPRS - very annoying. So I have now set up the VPN to disallow internet access.
rsawoseyin
Can you please share how u have setup the VPN? I am not even able to connect.
Isn't there anybody else here who can assist?
My roms have vpn capabilities, if you go to connection at the bottom it has "set up vpn" (or something like that)