Similar to the problem some Hermes users have
(see: http://forum.xda-developers.com/showthread.php?t=294324)
I am facing the same issue on my Wizard using WM6 with my 2GB Sandisk miniSD card.
This is the problem:
1. once auto-suspending to standby mode files and folders on the SD card cannot be accessed anymore
2. folders are not listed correctly anymore (folder structure and files seems to be corrupted)
3. capacity of the Storage Card would shown as fully used although it is not
4. once SD card ejected and re-inserted won't be detected anymore
5. only after soft reset the SD card as well as the folders and files would be shown and accessible again
6. however, this problem only happens with the different WM6 roms but not with any WM5 rom
7. also IPL/SPL and radio version seem not having any effect/influence on that problem
As soon as I install any version of WM5 (in combination with any IPL/SPL or radio version) the SD card will work again in the usual way - e.g. "hot"-eject and re-insert works just fine.
I changed the following registry setting:
HKLM\drivers\SDcard\ClientDrivers\Class\SDMemory_Class\DisablePowerManagement
Value = 0 (instead of 1)
The result is: it helped not to corrupt the listing of the folders and files on SD Card after re-activating from standby so structure and folder can be seen and opened (so point 2 from above solved) but files still cannot be opened.
Anyone having similar problems on the Wizard?
Anyonre having an idea for solution?
Again, SD card works as usual as soon as I step down to any WM5 rom.
Cheers!
Not sure why it's doing that, but did you try backing up the card while in WM5 or in a card reader and then reformatting the card to fat32 and seeing if that solves the issue? I spend way too much time on here reading almost all of the new posts and the only people that seem to have the problems that you're experiencing are people that are using 4 Gb cards so it may be that your card is going bad possibly. Reformatting in fat32 though seems to help with the 4Gb cards though sometimes.
Xeno1,
thanks for your answer.
Yes, the first thing I did was reformatting the card with FAT32 (also a trial with FAT16). No luck.
Actually I was thinking the same that the card might be not good (or even a fake) as the card is (newly) bought here in PR China (I am located in China at the moment).
But then I found the thread (as referred to above) in the Hermes section where some people having quite the same issue (symptoms showed up with upgrade to WM6 while no issues at all using WM5). I also tried the different proposals from there without any success.
Not tried yet is the proposed work-around by changing to a Kingston 1GB card (Japanese made version). So I may want to try that.
Strange thing is that my Wizard shows two problems which are quite rare for Wizards while they appear more often with Hermes (second problem is a dead WIFI after my provider change from Chinese WM5 rom to English WM5 rom for me).
You might just try a different 2 Gb card. They're cheap enough and very few people seem to have problems with them in wizards at all. You could even try returning the one you have since most of them have a lifetime garauntee on them anyway and get a new one and see if it does the same thing and then try the 1 Gb card if it does.
I can't help you with the wifi problem though, I've been working with computers since before they even had home computers and never gotten around to setting up a wifi network until 2 days ago.
Xeno1,
thanks again.
OT:
I only remember the old AppleII days >25yrs ago though I was little kid then.
I mentioned the WIFI only to illustrate the big picture (assuming the problems might be related). What I learned from another (Hermes) thread in this regard is that it is about corrupted data in the EEPROM. (The interesting thing is 3 other colleagues of mine got the same problem with their Wizards after having the provider changed the ROM from Chinese to English. But it doesn't bother them as it bothers me though.)
Back to topic:
As for the SD card issue I will check with the cards my colleagues are using to see whether it is a card problem or a driver problem tomorrow at work.
Cheers!
Today I checked with a 1GB Kingston (don't know though whether it is the Japanese version). It has the same problems as the 2GB Scandisk. Cannot detect when "hot"-inserted.
On the other hand the 2GB Scandisk worked on the Wizard of my colleague (WM5) right away without any issues. (And this Wizard also has the WIFI problem).
So, it is quite the similar to the problem of some Hermes users I mentioned in my first posting and it seems to be a problem about the drivers in WM6??
Any ideas?
Did you try any other versions of WM6 than NBD V8.1? If you haven't, you might try flashing a different version and see if it still does it.
Xeno1,
I tried some different ones before so I thought it is about the WM6.
Tonight I did some more extensively testing and this is the result:
Not working with hot plug n play of the SD card:
NBD V7.9-NBD V8.1
XDA Mobile6r2 and 6r2a
BlackDiamond1.1
Plug and Play does work:
XDA Mobile6
BlackDiamond1.0
OCTAIVOI v3.4
Did you try with the Jaguar Build?
Well, I'm glad you got it partially fugured out anyway. I've used XDA mobile 6 before but since then I've cooked my own ROMs. I'll have to do some looking in to it and see if I can figure out what the differences are between the working and non working ROMs and see if I can't figure out the cause.
Xeno1,
thanks again for your help.
I continued testing with the different ROMs:
Not working with hot plug n play of the SD card:
NBD V7.9-NBD V8.2 (later one, both Crossbow and TouchFlo)
XDA Mobile6r2 and 6r2a
BlackDiamond1.1
Plug and Play does work:
XDA Mobile6
BlackDiamond1.0
OCTAIVOI v3.4
TNT 4.0
Nottoosmart,
tried to download. Couldn't go through ....
Cheers!
I'm having the same problem
I was formating the mini SD card (1GB) and my wizard went to stand by and didn't woke up. I held the power button for some time then my wizard restarted and now it doesn't detect my SD card. Anyone knows how to fix this problem.
Thanks in Advance!
If you were in the middle of formatting and your phone went in to standby then it probably didn't finish formatting the card, that's why it doesn't detect it. Probably the best thing to do is to put in to a card reader on your computer and reformat it using windows. You can also probably put it in to a digital camera and have it format it for you also if you don't have a card reader but using windows would be better.
xeno1 said:
If you were in the middle of formatting and your phone went in to standby then it probably didn't finish formatting the card, that's why it doesn't detect it. Probably the best thing to do is to put in to a card reader on your computer and reformat it using windows. You can also probably put it in to a digital camera and have it format it for you also if you don't have a card reader but using windows would be better.
Click to expand...
Click to collapse
Thank You! Xeno1
Trying now to find out the differences among the various OS to help me to understand why on my Wizard the SD card works with some ROM and does not with others.
SD card does NOT work properly:
NBD V7.6 - V7.8 -> OS 5.2.1413
NBD V7.9 - NBD V8.3 -> OS 5.2.1437
XDA Mobile6r2 and 6r2a -> OS 5.2.318 Build 15342.4.0.01
BlackDiamond1.1 -> OS 5.2.1437 Build 17944.0.3.1
OCTAIVOI v3.6+; V4.0 -> OS 5.2.1437 Build 17944.0.3.1
WRCX V1, V2, V3 -> Core: 5.2.1437.17944.301
WM6Ti -> OS 5.2.318 Build 15342.4.0.01
SD card works just fine:
NBD V7.4 -> OS 5.2.1413 ???
XDA Mobile6 -> OS 5.2.318 Build 15342.4.0.01
BlackDiamond1.0 -> same as V1.1??? (OS 5.2.1437 Build 17944.0.3.1)
OCTAIVOI v3.4 -> OS 5.2.1437 Build 17944.0.3.1
TNT 4.0 -- base: 15341, 15342, and 1413 ( with some of 1437 apps) and no compressed dlls
TNT 5.0
This is what I found out so far regarding the XM6 versions:
XM6 is built on the OS 5.2.318 Build 15342.4.0.01 rom that was provided to us by InGeNeTiCs from Howard Forums. One major difference between the original Release and Release 2 is that in this version the ROM, SYS, and OEM folders originated from the Ingenetics Kitchen work by mattk_r (where the original release of XM6 was a mismash of Faria ROM kitchen OEM packages, and ones I built).
Click to expand...
Click to collapse
Another thread about the different OS builds does not seem to help me in this case though having very interesting information from mfrazzz:
http://forum.xda-developers.com/showthread.php?t=316447
So I hope zoki, mfrazzz and dr.dot can enlighten me about the difference of the build of the various versions ot their respective ROMs.
Xeno1, have you been able to find out something?
Cheers!
Have been trying all the ROMs listed above yet don't see any pattern what causes the SD card to work properly or not.
Could it be something with the compressed DLLs?
Seems the approach from its right not to use compressed files helps to avoid the problem ... so I am using TNT V5 with HTC home now ... thanks a lot, its right!
When upgrading to TNT.1437 I found the same issue again, so this is the current "compatibility list" for my Wizard:
SD card does NOT work properly:
NBD V7.6 - V7.8 -> OS 5.2.1413
NBD V7.9 - NBD V8.3 -> OS 5.2.1437
NBD V9.1
XDA Mobile6r2 and 6r2a -> OS 5.2.318 Build 15342.4.0.01
BlackDiamond1.1 -> OS 5.2.1437 Build 17944.0.3.1
OCTAIVOI v3.6+; V4.0 -> OS 5.2.1437 Build 17944.0.3.1
OCTAIVOI's Wizard 5.0 -> OS 5.2.1921 Build 18508.0.7.0
WRCX V1, V2, V3 -> Core: 5.2.1437.17944.301
WM6Ti -> OS 5.2.318 Build 15342.4.0.01
TNT.1437 -> ".. based on 1437 build, but using OEM Drivers as modules .."
SD card works just fine:
NBD V7.4 -> OS 5.2.1413 ???
XDA Mobile6 -> OS 5.2.318 Build 15342.4.0.01
BlackDiamond1.0 -> same as V1.1??? (OS 5.2.1437 Build 17944.0.3.1)
OCTAIVOI v3.4 -> OS 5.2.1437 Build 17944.0.3.1
TNT 4.0 -- base: 15341, 15342, and 1413 ( with some of 1437 apps) and no compressed dlls
TNT 5.0 -> 5.2.1620 build 18125
Anybody has a clue about the reason? Seems like some drivers' issue !?!?
Same Problem
I am having the exact same problem. i haven't had the problem with any rom up until now, and I've used lots (usually NBD or TNT). Yesterday I upgraded to TNT .1437 and the problems started. Any help would be greatly appreciated as I'd like to stick with this rom for at least a little while!
Related
which wm 2005 rom should i get for my unlocked o2 xda ii currently running wm 2003 not se vers?!?!!? i want 2005 as i wm 2006 maybe too slow for my o2 xda ii ?
there are so many i dont understand, i got
C_ShekharAKU3.5c.R40.P24_public from xda delv
Virgy_164864 from buzznet ([HIMA] WM5 3.33a AKU23 Virgy build (16MB ramdisk 48MB pagepool 64MB program)
which one shall i use
and i hope xda_ii_172181_final is my original rom as a back up just incase i dont like the new roms so i can revert back
i heard problems with cant get in to flight mode, calander, phone book, excel bug (fixed?)
i primarily need it for tomtom 6 sat nav, inbox e mail active sync and thats it really... so i need bluetooth and tomtom 6 to work flawlessly on wm 2005
Given how easy it is to flash a new ROM i would suggest downloading a few and trying them out for a few days.
tks ,. can u confirm if i have the original xda ii rom just in case i need to revert back , i can down back grade from 2005 to 2003 (oriignal ) right
which in your experience is the best 2005 rom for my xda ii ?
i am presuming this is best one yet WM2005 AKU3.5 RAMDisk-40MB Pagepool size-24MB for Himalaya
as the Helmi Himalaya AKU3.5 ROM SP2 has issues with mms, tomtom back light?
Can't remember which ROM i have currently installed, fairly certain it's Athers WM6 ROM, think i have the Profesional version with the 64Mb RAM Disk.
Can't answer as to the other ROMs , don't think i have tried them. Also I have yet to try going back to WM2003, happy with what i have so far, just need to get WiFi working via an SD card for completeness.
thanks foir that , i am now running C_ShekharAKU3.5c.R40.P24_public from xda delv
flashed ok
but extrom is blank ?? how do i enable it ., i tried running locker but it says warning will re partition my drive ? ?? ?
Which is exactly what it is designed to do, it reformats the Ext-ROM as useable space. Least that's my understanding of it. I certainly did it. Oh and it only needs to be done once, after that there is no Ext-ROM, unless you follow one of the sets of instructions to put it on the Storage Card.
checking my start > settings > memory > so know i got ramdisk 39mb and ext roim 15mb with 1mb left. so this is now non volatile memory ?
Hello,
In some GUI dialogs on my x7510, the text is rendered as squares or blocks rather than letters. This is most apparent in the Opera browser settings screens. Any assistance to help fix this would be great.
Also my x7510 locks up quite often. It will get into a mode where I cannot get back to the main HTC home screen even if I press the home button on the front bezel. This has happened in several programs (exchange email, Opera browser, and Wifi settings) Soft power off also does not help. I have to do a device reset to get the machine working again. If anyone has a fix or suggestions for this issue, please let me know.
Another odd thing that is happening to me is that the weather panel of the HTC home page will not update via AT&T HSDPA or edge. I have to be connected to WiFi to get the weather data to update. Anyone have suggestions to fix this?
I am running the latest version of the WWE OS that I got from the cmonex sticky:
CE OS 5.2.19217 (build 19217.1.0.6)
Rom version: 3.29.707.3
ROM date: 07/18/08
Radio version: 1.58.00.00
Protocol Version: 32.91.7020.20H
ExtROM version: 3.28.709.102
Model No.: ATHE400
Platform: PocketPC
Also, since flashing the above ROM on 12/25/2008, I have not installed any additional programs. I still have these issues with the ROM as installed clean.
Thank you in advance for any help!
There is no fix for this but to revert back to the original stock ROM. It all started when you installed a new one right?
Stock ROM also had issues
Hi! Thanks for your reply.
The stock ROM also had all of these issues. I waited to post until I was able to flash the newest ROM from xda-developers.
The blocks are annoying but I can live with them. The lockups are making the system kind of unusable.
My original config was this:
x7510 shipped:
CE OS 5.2.19209 (build 19209.1.0.2)
Rom version: 3.27.405.3
ROM date: 05/28/08
Radio version: 1.59.00.00
Protocol Version: 32.91.7020.20H
ExtROM version: 3.28.709.102
Model No.: ATHE400
Platform: PocketPC
I keep my systems very plain and I avoid adding front ends until I feel sure that the bare OS is stable.
I suppose I could uninstall these items:
Opera
Google Maps
GPS Test
and give it a few days.
The new WWE ROM 5.2.19217 (build 19217.1.0.6) had Opera and Google Maps installed as part of the ROM iimage.
How to load EXT ROM?
Christian,
I noticed that your config and my original config are the same except for the Ext ROM:
You have: 3.27.405.104
A) How do I get my hands on that ROM?
B) How do I load it into my x7510?
I would like to try the same configuration that you have on your x7510 since you have no lock ups.
What does the Ext ROM do anyway?
Thank you,
Jonathan
LittleBrotherJ said:
Christian,
I noticed that your config and my original config are the same except for the Ext ROM:
You have: 3.27.405.104
A) How do I get my hands on that ROM?
B) How do I load it into my x7510?
I would like to try the same configuration that you have on your x7510 since you have no lock ups.
What does the Ext ROM do anyway?
Thank you,
Jonathan
Click to expand...
Click to collapse
Mine came pre-installed. I have not changed anything on mine since I bought it.
A) I don't know how you can get a copy of my ROM. I assumed you already had a way to revert back to the original ROM before trying out the new ROMs.
B) I don't know. Sorry.
YES, I am perfectly happy with the stock ROM. No freezes and does the job as I wanted, not to mention, I already have a ton of applications installed. I have filled 6MB of the flash disk with applications, about 150 of them or more. 50 of them are games, the rest are a lot of references.
I believe the Extension ROM installs the Phone settings for the different carriers around the world, and Google Map application.
Chinese
I believe your Opera is a Chinese version. Mine came that way as well. All of my install disks were Chinese too. The squares you see are your device not recognizing the language. I installed a beta version of Opera (9.51 Beta build 1718_a). This got rid of the "square boxes". The only issue I have with it is upon exit Opera switches my device to "portrait" mode (a minor issue compared to the boxes). There is 9.52 Beta version of Opera that I have not tried yet as well. Anyway Opera is very usable now and I can change settings.
ROM:....................3.27.405.3
ROM Date:.............05/28/08
Radio version:........1.58.00.00
Protocol version:....32.91.7020.20H
ExtROM version:.....3.28.709.102
ATHE400
PocketPC (WM 6.1)
Hi,
I've got a Touch Cruise that I've flashed several times three days ago.
First I've done the hardSPL flash, CID unlock and SIM unlock.
After this I've flashed with a 6.1 rom (M-Amine 2.0) but I was seaking for a more "finger-friendly" UI so I've tried Kostas's C2 rom.
It's after flashing with Kostas's C2 rom that the problem first appeared. After a hour I could'nt launch any software. As File Explorer was already executing, I tried to launch exe files directly, but there were no more files in phone storage memory.
I softreset the device and it failed to boot (everlasting windows starting logo).
I've hardreseted the device and it booted successfully.
So I flashed the device with pcarvalho eXtreme :
pcarvalho eXtreme (3.60.WM65X) ROM 3.19 R0 Release (101MB RAM) [23557] (non3D) [16-Apr] (fixed)
It flash well, run for two or three hours and I noticied that my ringtones mysteriously changed to the default one. Using the File Explorer I checked the content of storage memory and it was all corrupted. Missing folders, files with non-alphanumeric names in root folder...
After a hard-reset my phone works well.
Things I've done after each installation : Contact+sms restore using PPCPimBackup, TomTom installation (7.918.xxx)
My Rom :
OS Version : 5.2.23557
Radio Version : 1.59.46.12
Anybody knows where can it come from ?
Thanks
Boudin said:
Hi,
I've got a Touch Cruise that I've flashed several times three days ago.
First I've done the hardSPL flash, CID unlock and SIM unlock.
After this I've flashed with a 6.1 rom (M-Amine 2.0) but I was seaking for a more "finger-friendly" UI so I've tried Kostas's C2 rom.
It's after flashing with Kostas's C2 rom that the problem first appeared. After a hour I could'nt launch any software. As File Explorer was already executing, I tried to launch exe files directly, but there were no more files in phone storage memory.
I softreset the device and it failed to boot (everlasting windows starting logo).
I've hardreseted the device and it booted successfully.
So I flashed the device with pcarvalho eXtreme :
pcarvalho eXtreme (3.60.WM65X) ROM 3.19 R0 Release (101MB RAM) [23557] (non3D) [16-Apr] (fixed)
It flash well, run for two or three hours and I noticied that my ringtones mysteriously changed to the default one. Using the File Explorer I checked the content of storage memory and it was all corrupted. Missing folders, files with non-alphanumeric names in root folder...
After a hard-reset my phone works well.
Things I've done after each installation : Contact+sms restore using PPCPimBackup, TomTom installation (7.918.xxx)
My Rom :
OS Version : 5.2.23557
Radio Version : 1.59.46.12
Anybody knows where can it come from ?
Thanks
Click to expand...
Click to collapse
it can be a many number of things...but you can start by check the card first...every time you go from one rom to another check it and save things (important ones)
now you can only try to get things back with getdataback (always worked with me)...
cheers
Thanks for the answer. It's not my storage card that lose data but phones internal storage memory.
It happened again just now, while installing a cab file.
I've got the impression that it's linked to cab installer since the other times I have installed a CAB to (tomtom) but it could be the fact that cab installer is writing data on defective memory.
Is there a way to test the internal storage memory in order to check if the problem is hardware ?
Finally it happened again, without cab install, without any manipulation after the hard reset.
I switched back to M-Amine 2.0 (WM 6.1) and it seems to have resolved the problem.
It's like the file system driver used in windows mobile 6.5 don't works well with my phone, wich can explain the file renaming, file disappearance, directory loss etc...
I would like to have a solution to switch back to WM 6.5 and a more recent version of HTC applications, so if anybody have any idea where can it come from...
Sorry to post three messages in a row, but there may be a thing I misunderstood.
In Pcarvalho rom thread I've seen this :
There seem to be HR and MC losing data issues with some roms, so i recommend flashing a htc original rom and only then this one, before proceeding as always make a backup of all data before attempting to use this rom...
Click to expand...
Click to collapse
But I don't know what HR and MC stands for here.... Is this concerning only the Storage Card or phone's Internal memory can also be problematic ?
I may have to flash back to an official rom before try again a WM 6.5 rom.
The problem have disappeared since I'm back to a WM 6.1 rom
Boudin said:
Sorry to post three messages in a row, but there may be a thing I misunderstood.
In Pcarvalho rom thread I've seen this :
But I don't know what HR and MC stands for here.... Is this concerning only the Storage Card or phone's Internal memory can also be problematic ?
I may have to flash back to an official rom before try again a WM 6.5 rom.
The problem have disappeared since I'm back to a WM 6.1 rom
Click to expand...
Click to collapse
i've been trying with android while waiting for pcarvalho next release. i am using task29 and radio.nbh to clean up the rom. what i noticed is that ( and i believe) task29 does not really clean the ROM, because after flashing many times android ( and i always use Task29, then flash android rom) the problem that i have ( lock SD card and its r/o status) did not disappear. i've been switching from rom to rom to rom (different build) , trying to elimante the problem. at last i flash back pcarvalho's rom back, than task29, than back to android. the problem solve. i donno may be because task29 only perform quick format instead of full format. the problem stays. i think ( maybe i am wrong) the bigger the size of the rom file is better as it rewrite the whole rom instead of small section of rom.
i guess...
It's surely something like this, i've just flashed with an official rom and flashed with pcarvalho's one and this time it works like a charm. (by the way, thanks to all cookers for their works).
So the problem is resolved, I had misunderstood the problem of data loss as it does not affect only the storage card data but also phone's internal storage memory.
Thanks to all.
H3r5
final version
Description:
Windows Mobile 6.1 (AKU 1.6.1) WWE and PLK
PagePool: 5,25 MB (3,5 MB is recommended, speed is similar, larger RAM).
Release date: 7/12/2010
Useful applications, without TouchFlo2D and HTC Home
G3 and G4 safe
Recommended RadioROM 2.61.11!
Screenshots:
[ 1 2 3 4 ]
Download
pass: Ham3r
________________________________________
Clean
final version
Description:
Windows Mobile 6.1 (AKU 1.6.1) WWE and PLK
PagePool: 5,25 MB (3,5 MB is recommended, speed is similar, larger RAM).
Release date: 8/17/2010
Clean
G3 and G4 safe
Recommended RadioROM 2.61.11!
Screenshots:
[ 1 2 3 ]
Download
pass: Ham3r
thanks H3r5
Hi Ham3r
What are the main changes comparing to H3R4?
speedy9 said:
Hi Ham3r
What are the main changes comparing to H3R4?
Click to expand...
Click to collapse
Unlocked Exteneded ROM, small fixes, larger RAM and other..
rom is good
but in your wwe version :-
-starts slow (may be)
-wifi is not working
i mean that when i tap from comm manager or even from setting section it does not starts !!!
any patch for it ? or solution?
I had the same problem here with WWE : wifi was not working. (solved see below)
I made it working only one time after a hard reset...
Then I reflashed radio with 2.61 :
http://rs223tg.rapidshare.com/files/155922498/3325703/Radios.rar
now wifi seems ok again, after reboot and shutdown.
I cross fingers !!!
And boot time is incredibly fast ...
Whats the password for the (Radios) rar
Dzięki za rom / Thanks for ROM
ps. pass for radios: xda
eljuggy said:
I had the same problem here with WWE : wifi was not working. (solved see below)
I made it working only one time after a hard reset...
Then I reflashed radio with 2.61 :
http://rs223tg.rapidshare.com/files/155922498/3325703/Radios.rar
now wifi seems ok again, after reboot and shutdown.
I cross fingers !!!
And boot time is incredibly fast ...
Click to expand...
Click to collapse
I repeat, recommended is 2.61 radio and 2.26 SPL
After testing final versions, i think: both versions aren't similar. So i release soon fixed versions.
These differences are very small, but it's very imporant for me. Old versions are stay good.
//EDIT: fixed versions are uploaded.
Ham3r said:
I repeat, recommended is 2.61 radio and 2.26 SPL
Click to expand...
Click to collapse
I use 2.69.11 radio and have never had trouble with WIFI or anything else on your ROMs. I want to keep mentioning CRACING's ROM in my signature because it is the best Wizard 6.5 ROM so far, but the fact is that I use your H3r5 final ROM on both of my phones now.
When I get bored I change the today screen.
HTC Home is simple, fast, reliable.
SPB Mobile Shell is more like Android, and I like it sometimes.
Manila2D 2 build 1919 (with weather updates on the flip clock like HTC Sense) is beautiful and actually runs well with this ROM.
But I get bored, as I said, and keep switching between them.
n2rjt said:
But I get bored, as I said, and keep switching between them.
Click to expand...
Click to collapse
Thanks for info about RadioROM.
n2rjt, in my opinion, the best is Manila2D v2 (looks nice, but runs slowly) and HomeScreen++ UI (very customizable interface, very light, o/c and other..)
Do you can post link to (for?) working Manila with weather on Home Tab?
I used a folder that I had downloaded in October 2009. I had named the folder "M2D wm6.5". Looking through my old posts, it looks like I got it from here, following a response to my question which was here.
With your ROM, I have just installed the "first" and "second" folders, and the geolocation weather worked beautifully, both from WIFI and cell towers. I installed all of these to internal memory. I think that earlier ROMs I had tried such as the MSD ROM lacked sufficient internal memory to install all of these.
The weather on the home tab worked without requiring a workaround. I was surprised but happy.
Hi, I just flashed your rom and the first time wifi worked but after that I can't make it work again. Wifi just won't start from communication manager. I have radio 2.61.11, I reflashed the same radio and it still doesn't work. I have a G4 wizard if that counts. How can I fix this?
Hi Ham3r,
I want to upgrade my Cingular 8125 unlocked to WM 6.1. Please can u tell me which rom should i use?
Regards
Pankaj
Testing...
Hi, I've just downloaded your rom and installing it
later I will tell you how did it work.
after 1 hard reset I made wifi work
up to now very fast rom
thanks!
Uploaded Clean ROMs based on H3r5, for users who don't like added programs
Flashed your HTC_Wizard_6.1_21042_WWE_Clean_by_Ham3r.zip today. works great, fast enough on boot, wifi also works. the only thing is that the comm manager placed in both programs and Settings->connections.
oh, and how use voice dial in here? cant find the option...
Everything else is ok, this is my favourite wm at this time )
Comm Manager is in connections and in programs. It's normal and good (you can set commmgr to any button). In pure WM commmgr is just in settings.
VoiceDial is deleted, there just standard WM apps (+ MMS, Java, Network Wizard and smartskeys). You can install whatever you like (VoiceDial or VoiceCommander). Of course, UC is included.
btw. i fixed my SD slot in Wizard!
I tried to search for an answer on this, but could not find a way to limit my search to the hardware and software -- and because I'm new, I can't ask the question in the RIGHT thread in the RIGHT forum!
I am trying SD installs of Android on a T-Mobile USA HTC HD2. I have tried AmeriCan Android, which was beautiful, but it locked up after the third or fourth start. (I re-installed twice with the same results.)
Now I am trying NexusHD2-Gingerbread V3.2a by tytung, and it has been great ... except that it goes into SOD in no pattern that I can discern. Yes, I'm sure this has been covered, but as noted above, I don't know how to limit my searches to find WHERE this has been covered!
Here is my hardware/software:
HTC HD2 with 1024MB flash and 576MB RAM.
WinMo 6.5, version 5.2.21892
ROM version 2.13.531.1 (90963) WWE
Radio version 2.10.50.26
SPL version 2.10
SD Card: Sandisk class 2, 16 GB (stock card that came with phone)
No HSPL, MagLDR, cLK, or CWR installed -- just the Android folder on the SD card.
Any help will be most appreciated!
Lots of looks but no replies. Am I the only one ?
Maybe it is the low signal-to-noise ratio. The traffic on this site is incredible!
Bump - still hoping for some help!
In case anyone else is having this problem, I finally found a solution. I followed the steps here: http://forum.xda-developers.com/showthread.php?p=20389084. I don't understand why that worked, but I am enjoying my Android phone!