IS this possible? cause i kinda mest up my charger port and it doesnt sync well..and im afraid ill break it and it woulnt be able to charge even.....
please HELP!?
Theoretecly yes.
There is a USB adapter that gose in to the sd slot.
and another end (USB) fits in to your PC, but the rest is mistery....
http://www.proporta.com/F02/PPF02P05.php?t_mode=des&t_id=2306
Yes you can,if you have a binary file of OS done via MTTY,please search over the forum
Optika said:
Theoretecly yes.
There is a USB adapter that gose in to the sd slot.
and another end (USB) fits in to your PC, but the rest is mistery....
http://www.proporta.com/F02/PPF02P05.php?t_mode=des&t_id=2306
Click to expand...
Click to collapse
Simply slot the card into the SD card slot of your camera, PDA or other mobile device and use it in the normal way, once the data is on the card, simply remove it and plug it into the USB port of your computer.
Available in 2GB capacity, this card is essential when travelling or taking work home from the office.
Click to expand...
Click to collapse
The way I see it it's just a Usb stick but with one end being a SD card.
You can stick it in your usb port on your computer then set your data on it, after that you take it out and but it in your pda using the other end.
So it can't be used to connect your pc to your pda directly
Related
Hey everyone,
I have a 1gb micro sd card. It apparently has bad blocks and cannot be recognized by my 8525 (WM6.1), vista pc or xp sp2 pc. I have the programs to recover the info on it, but none of these programs are effective because the card doesn't show up as a drive.
I am attempting to access the card directly from the phone. With the pc's I have an usb adapter that I know works because I use it for my 8gb micro sd card to swap information.
Can some one give me an answer on how to either fix the bad blocks or make the card recognizable by the ppc or pc's? The recovery programs I have say they will get info off a formated card, but I can't format what the phone or pc's doesn't recognize.
Thanks.
which apps did you try?
if if i'm not mistaken i managed to recover a card using Active Recovery 7
The easiest way for me was, plug your card back to where it gave you a bad blocks, and it should be readable, then backup your datas there,.
this is what i did to my 2GB miniSD for Olympus e520 SLR Camera (the camera lost now),.
I plug it in to my friend laptop, then it cant be readable by any device, then i plug it again, and its readable, then i back it up, then i leave the miniSD,.
Hey G, Thanks for the reply. The card went bad in a digital camera. So I should place the microsd card in the camera, use the usb cord to connect to the pc, remove the usb cord once the card doesn't read, then reconnect the usb cord?
nir36 said:
which apps did you try?
if if i'm not mistaken i managed to recover a card using Active Recovery 7
Click to expand...
Click to collapse
I'll check out Active Recovery 7. Thanks.
Sorry if I haven't look hard enough, but is it possible to se my Sprint Touch Pro as a regular microSD reader? You know, without using any of the synchronization business or having to carry a separate microSD reader around? Thanks in advance.
Mega-Japan said:
Sorry if I haven't look hard enough, but is it possible to se my Sprint Touch Pro as a regular microSD reader? You know, without using any of the synchronization business or having to carry a separate microSD reader around? Thanks in advance.
Click to expand...
Click to collapse
yes, when you plug in the usb cable to your pc with the micro sd in the phone, instead of activesync, select disk drive as the connection choice
fugazzi69 said:
yes, when you plug in the usb cable to your pc with the micro sd in the phone, instead of activesync, select disk drive as the connection choice
Click to expand...
Click to collapse
Where do I get that choice though? I'm asking this because I want to use it that way at College, and all PCs there limit just about anything but whatever programs they have.
Mega-Japan said:
Where do I get that choice though? I'm asking this because I want to use it that way at College, and all PCs there limit just about anything but whatever programs they have.
Click to expand...
Click to collapse
those options should pop up on your phone's screen when you plug in the usb cable to the PC. just make sure you have the micro sd card installed on the phone when you connect to the PC
fugazzi69 said:
those options should pop up on your phone's screen when you plug in the usb cable to the PC. just make sure you have the micro sd card installed on the phone when you connect to the PC
Click to expand...
Click to collapse
Oh now I see.
The reason I had no idea what was it that you were talking about is because the "Ask about connection type when I connect" option in the Connections Settings was unchecked. And ActiveSynch was selected as the default.
Thanks a lot, useful stuff.
Need some help with this. I have a trail camera for watching deer in the woods. It has a SD card adapter with transflash card in it to record the photos on. I have an android phone with transflash card. But if I swap them out I lose my custom ringtones I have set up for everyone. Is there some way I can get those photos onto my cell phone without having to bring the trail camera home and download the photos?
anaylor01 said:
Need some help with this. I have a trail camera for watching deer in the woods. It has a SD card adapter with transflash card in it to record the photos on. I have an android phone with transflash card. But if I swap them out I lose my custom ringtones I have set up for everyone. Is there some way I can get those photos onto my cell phone without having to bring the trail camera home and download the photos?
Click to expand...
Click to collapse
Only Way I Can Think Of Is To Connect To Your Computer For Transfer, Either That Or Email Them To Yourself, Then Go To Email From Your Phone! Also I Would Recommend Making A SDCard Backup On A Computer, In Case Of Losing Files, Say (Ringtones)
Sent from my HERO200 using XDA App
What I was thinking was a male to male mini usb cable. But I guess the phone doesn't have the drivers to read from another usb device.
anaylor01 said:
What I was thinking was a male to male mini usb cable. But I guess the phone doesn't have the drivers to read from another usb device.
Click to expand...
Click to collapse
Are Both Of The SdCard The Same Size, If So You Can Press...
Unmount SD, Then Put The New One In Your Phone To Then Connect To PC, Me Myself I Have A SDCard I Just Purchased That Allows You To Insert A Micro SdCard Into That, To Then Transfer Apps/Pics/Files..... To A PC Easily!!
Sent from my HERO200 using XDA App
What if you just copy the custom ringtones to the internal memory of your phone with a file manager, swap the cards and then copy them back to the card?
Hello,
New to Android and new to this forum. I have my TF700T two weeks now and I'm glad I bought it. My target is to copy the content of my Compact Flash cards (16GB each - from my DSLR) to a portable hard drive. Therefore I tried to connect both a card reader and a portable hard drive via an auto-powered USB-hub to the only usb-connection of my tablet. I even tried with another hub and even with a third hub. The only result was that my tablet only found the first device that was connected (regardless wich one: the CF-card or the HD) with the hub and not both at the same time, so copying from the CF-card to the drive isn't possible in one step. Sure I can copy the CF-card to the internal memory of the tablet and in a second pass move it to the HD, but that is very time-consuming.
Anyone who knows how to connect more then one usb-device at the same time via a powered USB-hub and do a file transfer between them? Your help is greatly appriciated.
You can use wi fi transfer to do it with a file manager, like file expert.
tbtaf said:
You can use wi fi transfer to do it with a file manager, like file expert.
Click to expand...
Click to collapse
@tbtaf: When on vacation or on a photo trip I only have that portable hd, my tablet and a powered usb hub. I think a Wifi appraoch is not applicable then. Or am I missing something?
Sounds like you need to setup a second mount point for the additional device - don't know if that can actually be done or not, but I do know that some people who could not even connect the first device were able to manually specify the device by mounting it in a terminal window.
I'm not sure 100% on the code, but let me try to find out.
Or you could copy the 16 Gb CF card onto the pad's internal memory (or external MicroSD card), disconnect it, connect the HD and then copy it out again.
HeartWare42 said:
Or you could copy the 16 Gb CF card onto the pad's internal memory (or external MicroSD card), disconnect it, connect the HD and then copy it out again.
Click to expand...
Click to collapse
He already mentioned, he doesn't want to do this, he wants to copy straight.
For now, it's not possible since the powered hub or non power hub unable to recognize 2 devices at the same time.
CF, now there's nostalgia if anything. I thought those became outdated over 3 years ago... Fact is the CF is hardly compatible with mobile devices these days.
No, you can't copy from an external cardreader directly onto an external HDD through your tablet. It can only read 1 storage device in the USB port. Multiple devices works, but multiple storages doesn't. Some people have had some success with USB Flashdrives/Pendrives instead of HDD's though. You could try that.
You can copy from an SD to HDD easily though, so you could consider using an SD with a CF adapter if your camera has no SD slot. (SD's have the added advantage that the pins can't bent.)
Hi all,
Apologies if this has been answered elsewhere but I have looked and cant find anything.
My One S is Jelly Bean 4.0.1 (un-rooted)
The problem I have is basically this.
I have a Micro-B Usb Otg On The Go Cable and Integral MicroSD USB Card Reader with a 32gb Micro SD.
When I first put all this together and plugged into the USB slot of the phone everything was fine, the little red light on the Integral MicroSD USB Card Reader was lit up. The message of Unable To Charge Device was coming up but the phone was also mounting the storage for reading via Astro File Manager no problem, so I was able to play MP3's and 4's and so on. But then it literally just stopped reading the Micro SD card and the Micro USB Card Reader is not lighting up at all.
Any help will be greatly appreciated as I am at a lost as to why it would be working perfectly one second and then not another.
Thanks you.
Follow up.
Been doing a little bit more looking into this and it looks like it has to do with USB hosting. Is there any reason my phone would just stop hosting a OTG USB Flash Drive? As i mentioned before it work fine for a while and literally just stopped recognizing that there was any Mini Sd attached.
spruggs said:
Hi all,
Apologies if this has been answered elsewhere but I have looked and cant find anything.
My One S is Jelly Bean 4.0.1 (un-rooted)
The problem I have is basically this.
I have a Micro-B Usb Otg On The Go Cable and Integral MicroSD USB Card Reader with a 32gb Micro SD.
When I first put all this together and plugged into the USB slot of the phone everything was fine, the little red light on the Integral MicroSD USB Card Reader was lit up. The message of Unable To Charge Device was coming up but the phone was also mounting the storage for reading via Astro File Manager no problem, so I was able to play MP3's and 4's and so on. But then it literally just stopped reading the Micro SD card and the Micro USB Card Reader is not lighting up at all.
Any help will be greatly appreciated as I am at a lost as to why it would be working perfectly one second and then not another.
Thanks you.
Click to expand...
Click to collapse
You seem to be stock so not sure what's up with that but could try factory reset in the bootloader has long has you haven't changed recovery but backup what's on the SD Card because that will get wiped too.
Darknites said:
You seem to be stock so not sure what's up with that but could try factory reset in the bootloader has long has you haven't changed recovery but backup what's on the SD Card because that will get wiped too.
Click to expand...
Click to collapse
Thanks Darknites,
I have reset hard from the settings menu, does it make a difference if i reset from bootloader? I have downloaded USB Host Controller and look at what results I get from running that and I get the SC3 USB Host Driver Not Found which I believe is something to do with the chip set which doesnt apply to my phone but I also get the message of USB Root Hub Present but I also get Not Present sometimes when re-running and the same with USB Host Mode is Active and then sometimes Not Active after re-running the Host Controller App.
I did read somewhere that its possible that certain chip/chips might have been damaged/fried by an extended use of USB Hosting to a flash drive, is this correct?
Thanks again for the reply.
spruggs said:
I did read somewhere that its possible that certain chip/chips might have been damaged/fried by an extended use of USB Hosting to a flash drive, is this correct?
Click to expand...
Click to collapse
I havnt heard of that in YEARS, and even that was in most cases a false rumor. I have never encountered a chip dying by being used properly.
If you short-circut the cables or something - then yeah, thats a different story.
spruggs said:
Thanks Darknites,
I have reset hard from the settings menu, does it make a difference if i reset from bootloader? I have downloaded USB Host Controller and look at what results I get from running that and I get the SC3 USB Host Driver Not Found which I believe is something to do with the chip set which doesnt apply to my phone but I also get the message of USB Root Hub Present but I also get Not Present sometimes when re-running and the same with USB Host Mode is Active and then sometimes Not Active after re-running the Host Controller App.
I did read somewhere that its possible that certain chip/chips might have been damaged/fried by an extended use of USB Hosting to a flash drive, is this correct?
Thanks again for the reply.
Click to expand...
Click to collapse
Ya in bootloader everything gets wiped even sd.
I did cross my mind re the cable because the drives are fine in my PC, I know they are powered there though. I might try another OTG cable, there cheap as. Its just strange that one minute the Micro SD drive was working perfectly and then kaput.