i got 1 XDA 2 and ITech R35, i can pair it sucessfully. However, the sound quality is bad, it has hizzing sound and skipping, is there anyway to improve it? i have tried to use different players such as blue player and mortplayer, nothing happens. I am using 3.50pp16A2 rom. Please help me thank you very much.
leepenguin said:
is there anyway to improve it?
Click to expand...
Click to collapse
Overclocking your device to 530 MHz should help.
If not then it's a problem with your headset.
Sascha
SaBo said:
Overclocking your device to 530 MHz should help.
If not then it's a problem with your headset.
Sascha
Click to expand...
Click to collapse
Thank You for replying, i tried pocket hack master and xcpiscalar, but it doesnt working. I changed another headset, but still have those hizzing sound. Can someone help me please?
Related
Hi,
I've downgraded from WM6 (Smart1 v2) to LvsW RUU_Prophet_220734_2207114_024721_NVID.
But now my sound doesn't work :'(
If I use my headset...I hear the sound..but without NOTHING!
Anybody else got this problem?
I did serveal flashes but no sound :-(
Probably your loudspeaker is dead.
I had the same problem, warranty.
But nothing about flash, it's a problem on many Prophet
xvx45 said:
Probably your loudspeaker is dead.
I had the same problem, warranty.
But nothing about flash, it's a problem on many Prophet
Click to expand...
Click to collapse
But I find it quiet strange... because it's just @ that point!
Could also just be the the headset jack. Happened to me on two prophets after using the headset. Usually it's a pin which got stuck after pulling out the headset.
GAMBIT999 said:
Could also just be the the headset jack. Happened to me on two prophets after using the headset. Usually it's a pin which got stuck after pulling out the headset.
Click to expand...
Click to collapse
But... Before I flashed it...it worked :S
GAMBIT999 said:
Could also just be the the headset jack. Happened to me on two prophets after using the headset. Usually it's a pin which got stuck after pulling out the headset.
Click to expand...
Click to collapse
How can I check this right?
Surely, your speaker is bricked. It's a known problem of the Prophet.
Why just after flashing? Only a coincidence, I think.
Regards.
Nostramo
Nostramo said:
Surely, your speaker is bricked. It's a known problem of the Prophet.
Why just after flashing? Only a coincidence, I think.
Regards.
Nostramo
Click to expand...
Click to collapse
How can you say it's bricked :S
I'd worked fine.. everything... except the sound :-(
binky11 said:
Hi,
I've downgraded from WM6 (Smart1 v2) to LvsW RUU_Prophet_220734_2207114_024721_NVID.
But now my sound doesn't work :'(
If I use my headset...I hear the sound..but without NOTHING!
Anybody else got this problem?
I did serveal flashes but no sound :-(
Click to expand...
Click to collapse
Yes dude this is a problem with almost every prophet I also got it couple of months ago n got it repaired under warranty Actually ur speaker is fine its a problem with the headphone Jack..............
Fady said:
Yes dude this is a problem with almost every prophet I also got it couple of months ago n got it repaired under warranty Actually ur speaker is fine its a problem with the headphone Jack..............
Click to expand...
Click to collapse
I just figured it out yes
Thanks!
one stupid que - how to flash rom?
i am newer joined to this forum and have O2 xda Neo
please tell me... how to?
I took something good from my O2 XDA Flame.
It comes from wm5 device and works fine in my kaiser and Cruise. After the installation do a soft reset.
panosha said:
I took something good from my O2 XDA Flame.
It comes from wm5 device and works fine in my kaiser and Cruise. After the installation do a soft reset.
Click to expand...
Click to collapse
Is it only for wired headset or also for BT?
victoradjei said:
Is it only for wired headset or also for BT?
Click to expand...
Click to collapse
It's only for the wired headest and internal speaker... not bluetooth.
And it works like a charm!!!
athanaso77 said:
It's only for the wired headest and internal speaker... not bluetooth.
And it works like a charm!!!
Click to expand...
Click to collapse
I second this. Works great!! (Softreset after install)
Olioaglio
looks great...
ThanX
What's for this SW used for?
Better sound.
Does anybody have a german version of this software?
Bib_x said:
Does anybody have a german version of this software?
Click to expand...
Click to collapse
Are you kidding? This few simple dialogues are no problem even
for completely non english speaking persons by just playing around
with the few sliders and settings. Anyway, maybe it could be able to
customize with any resource editor. Give it a try...
Olioaglio
I am from yesterday a happy Touch Cruise owner and i think you must try this for better sound in your devices.
Maybe i must try to cook something.
panosha said:
I am from yesterday a happy Touch Cruise owner and i think you must try this for better sound in your devices.
Maybe i must try to cook something.
Click to expand...
Click to collapse
It smells good already. If you need donation, count me in
I don't need any donations, thank you, i 'm better without it.
Bravo Panos, Great job. Keep going
Kostas
panosha said:
I don't need any donations, thank you, i 'm better without it.
Click to expand...
Click to collapse
It looks beautiful, nice job, continue developing for Polaris please Hoping to see releases from you soon, thanks
Just to let you know this did not work on my polaris.
I have an Orbit 2 that i haven't had time to upgraded the ROM on so its the stock o2 windows mobile 6.1 with 1.59.44.02 radio that i have upgraded.
When i installed the cab, did a soft reset and attempt to enable it said that there was an error and it couldn't load the driver. After that i had no sound whatsoever. When i uninstalled this my sound returned.
Has anyone any ideas what the problem is?
thanks
Fergus278 said:
Just to let you know this did not work on my polaris.
I have an Orbit 2 that i haven't had time to upgraded the ROM on so its the stock o2 windows mobile 6.1 with 1.59.44.02 radio that i have upgraded.
When i installed the cab, did a soft reset and attempt to enable it said that there was an error and it couldn't load the driver. After that i had no sound whatsoever. When i uninstalled this my sound returned.
Has anyone any ideas what the problem is?
thanks
Click to expand...
Click to collapse
the same for me!!! some driver misssing!!!
Same here... and no sound anymore! Even after deinstallation and soft-reset!!! It's not compatible with win 6.1!
But uninstall isn't enough: I think it is the wavedev-entries in the registry! Can somebody please export his Wavedev in registry [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev] for me or give me all values in there? Thank you so much!!!
Okay, I did a little reasearch. Try this cab here. This will do the job for the polaris with windows 6.1
SRS Wow HD, seriously screws up your sound irreversably ALL THE TIME. When you turn off the SRS, it doesn't revert your sound to factory, it reverts it to garbage, same with when you uninstall SRS. As for using SRS, it sounds decent, but the fidelity of your sound is lost. Try plugging your cruise into an aplified system and crank up the volume. You'll notice that the sound starts to clip and degrade much more quickly than before as the volume goes up.
I used to use this program all the time, until I realised what I was missing after a hard reset reverted me to factory sound once again.
EDIT: And to the people who asked about bluetooh, yes it can be made to work with bluetooth after a registry change, however, like I said before, you don't gain very much using this program.
Feel like a real noob to ask this, but I bought a bluetooth htc stereo headset, but when I try to use equalizer, it wont start? Is there a "hack" to make it run with a2dp and not only with cabeled headset?
cheers
itje said:
Feel like a real noob to ask this, but I bought a bluetooth htc stereo headset, but when I try to use equalizer, it wont start? Is there a "hack" to make it run with a2dp and not only with cabeled headset?
cheers
Click to expand...
Click to collapse
Maybe you should give SRS WOW HD a try.
You can find it HERE.
Equalizer doesn't seem to really work, but SRS WOW is a great tool!
equalizer is crappy, but it was the only eq I knew of..until now. I will test this, thx man.
Im a musician, and sound is quite important (yeah I know, kaiser is not THE musicplayer) and since I do have a a2dp headset, its nice to be able to adjust sound.
I cant understand why HTC didnt include some eq-setings in audiomanager or ms in wmp....
and why didnt they include a toothbrush, dishwasher, screwdriver and a chainsaw? dam those would have been handy
cheers
I thought SRS didn't work over BT...
persiansown said:
I thought SRS didn't work over BT...
Click to expand...
Click to collapse
Hmmm.... I'm afraid you may be right.
I don't have a bluetooth (stereo,A2DP) headset, so I'm not sure.
I've been using this headset for a long time now. And I would like to use it with my desire as well. But the sound quality is so poor that it's like listening to a 56k mp3 file while actually I'm playing a 320kbps mp3.
It seems to me that somehow the bitrate on the bluetooth connection isn't high enough(very low actually).
Does anybody here know how I can change that easily? Or do you have any other solutions for this problem without buying a new headset.
btw, I use a Sennheiser HD215 headphone or the SE in-ear ear buds.
thanks in advance
I'm using the SE MW600 and I have no problems. Using stock rom with the update.
Zhypr said:
I'm using the SE MW600 and I have no problems. Using stock rom with the update.
Click to expand...
Click to collapse
+1 over here
flitjes said:
+1 over here
Click to expand...
Click to collapse
Good for you, but I would like to know how to adjust the bluetooth bitrate on Android.
sorry if I sound a bit grumpy but I've been searching for about 1,5 days straight and still found nothing.
Amrod89 said:
Good for you, but I would like to know how to adjust the bluetooth bitrate on Android.
sorry if I sound a bit grumpy but I've been searching for about 1,5 days straight and still found nothing.
Click to expand...
Click to collapse
Have you selected the media and phone options in advanced bluetooth settings????
kamidadevil said:
Have you selected the media and phone options in advanced bluetooth settings????
Click to expand...
Click to collapse
No actually I never touched these settings because they were already enabled when I paired the devices. And I figured it would be quite crucial to have those settings enabled if I wanted to use those profiles.
Amrod89 said:
Good for you, but I would like to know how to adjust the bluetooth bitrate on Android.
sorry if I sound a bit grumpy but I've been searching for about 1,5 days straight and still found nothing.
Click to expand...
Click to collapse
Was hoping you would conclude from my post that there isn't a problem with the Desire regarding bitrates over bluetooth. Does the headset work on other devices without problems?
Zhypr said:
Was hoping you would conclude from my post that there isn't a problem with the Desire regarding bitrates over bluetooth. Does the headset work on other devices without problems?
Click to expand...
Click to collapse
Ok, I know that for example the mw600 headset from SE works fine. So I think it's just the combination of devices, but that would be solved if I would be able to alter the bitrate.
I have used the headset with other devices without any problem, other than that I had to set the bitrate higher on a WM 6.5 device.
I have a little problem with this rom and this app. When I set sound source - headset, headset didn't plays, speaker plays. Is this app works someone fine?
Sorry for my english, just learning.
Sent from my GT-I5800 using Tapatalk 2
what rom and which app ? can u state properly ?
He stated it is kisadworx in the title itself
Well is the earphones icon visible in the status bar?
If no then try another headset.
If other headset works then you need to replace earphones
Also the earphone jack could have loose connection with motherboard which needs soldering
Sent from my GT-I5800 using XDA
rom: http://forum.xda-developers.com/showthread.php?t=1564336
app: https://play.google.com/store/apps/...=&purchaseButton=Ru39aM6Yi42vGjIDsFC2EOTIOcs=
I changed method to I9003, selected my region, and the same sympthoms.
I can normally listen to music with these same earphones, so I think they are ok.
It's an common problem i think, since i have the same issue. It probably is, because of the kernel not recognizing the headphones corectly, so spirit thinks it only has a speaker.
Thanks for answer ;]
Do u think that another kernel help me to resolve my problem?
rubensollie said:
It's an common problem i think, since i have the same issue. It probably is, because of the kernel not recognizing the headphones corectly, so spirit thinks it only has a speaker.
Click to expand...
Click to collapse
Forget what i said. The same occurs on cm7 when you use i9003 as audio mode.
All right, then the case is closed for now.
Thanks for help.