4gb sd card? can it be used - 8125, K-JAM, P4300, MDA Vario ROM Development

Hello,
First of all i want thank all of member of this wonderful site for providing all the knowledge and guidance and softwares to make our wizard and wonder wizard.
I want to know if i can use a 4 gb mini sd card with my wizard or not. If yes, then which one and if there is a certain way, then please tell me.
thanks in advance.

SDHC is supported if you flash to WM6

starkwong said:
SDHC is supported if you flash to WM6
Click to expand...
Click to collapse
Are you sure ? Last time I read discussions about 4GB miniSD in Wizard, bottomline was that card has to be NON - SDHC in order to be recognized.

I heard that from some China guys...
However OMAP850_SDHC.dll is loaded in Wizard WM6 ROM...

Yes BUT, does the HW support SDHC? Has anyone actually gotten their hands on a 4Gb miniSDHC and tried it on a Wizard w/WM6?

I had 4Gig SDHC by scan disk and WM6. Doesnt work

so conclusion is that it will not work. then.

I've a 4GB MINI SD CARD (SDHC) from CHINA and WM6 on my Device but it's doesn't work on it!

This is because you need hardware and firmware support for SDHC. Some of the early 4GB cards (pre-SDHC) would work some didn't as reported by many posters.

THere is a thread in the Wizard Accessories forum tracking what 4GB SD cards work on what Wizards. You may want to look at that thread. I can say I bought a 4GB min-SD off of eBay, and it works for awhile and then stops working. I've given up trying to do anything with it as I've lost data due to it twice (and causes slowdowns on my phone). Some claim to have resolved some issues with them (I thought I had fixed mine by reformatting it on a PC, but after about a week of it working well, it suddenly started having problems again).

I have a TOPRAM card (4gb), and it works great! (not sdhc)
No problem with speed at all!
I had an unbreanded card that didnt wokr.

Be careful. I have a TOPRAM 4Gb also and it was not stable on my Wizard with WM6. 6 different versions of WM6!

Related

SDHC on Panda and upcoming phones

Hi -- does anyone know if any of the new HTC phones with full-size SD card slots (the Panda, the forthcoming Sirius, and the Sedna?) will be SDHC compatible? The Panda is already out now, and I'm wondering if it's the first Pocket PC phone to read the latest 8GB SDHC cards?
Alan
A reasonable question, and one I'd like the answer to as well.
Wouldn't it be nice if HTC would at least post a link to the manual for their own device on their site?
Hmmm.... PDAdb now lists the Sirius (HTC P6500) as being SDHC compatible in their "detailed specs."
http://www.pdadb.net/index.php?m=specs&id=734
This wasn't there before. Does anyone know if it's confirmed or just speculation?
According to HTC P6300 Support, the Panda will support SD cards up to 4Gb and Mini-SD cards up to 12Gb.
I spoke with tech support today.
The Panda supports standard 4Gb SD cards. SDHC may work, but there's no guarantee. A patch may be made available in the future to allow this.
Tried a 4 Gb Transcend 150x standard SD (i.e. non-SDHC) card in my Panda today. Appeared to be working nicely.
I spoke too early.
I tried out said 4 Gb Transcend 150x SD card for a couple of weeks and experienced several instances of file corruption in much-written-to folders (backups, news article caches, and so on). May have been just a bad card, but I didn't feel like experimenting more with my precious data, so I didn't try out another copy.
I have since switched to a 4 Gb Sandisk Extreme SDHC (yes, high capacity) card, and it has been working flawlessly. Plus, it's blazingly fast! Highly recommended
[Duplicate post. Please delete.]

SDHC with Wizard?

Hi,
Although this question has been put up many a times but I don't see a conclusion in any of the threads. Can someone give a finite answer to the SDHC support in Wizard? (Y/N)?
Did anyone try this:
http://forum.xda-developers.com/showthread.php?t=345038&highlight=sdhc+patch
Thanks.
WIZA200 (HT622)
TNT 1933 ROM
Yep, tried it and it didn't work. I couldn't even read my existing 2Gb SD card
There seems to be conflicting information - some say it is just a driver issue, others say the Wizard's hardware can't support SDHC. I have searched and searched and it does seem that either the Wizard's hardware can't support SDHC or there simply hasn't been a driver written that supports it. Either way it doesn't work currently.
Andy
singhravi437 said:
Although this question has been put up many a times but I don't see a conclusion in any of the threads. Can someone give a finite answer to the SDHC support in Wizard? (Y/N)?
Click to expand...
Click to collapse
Depends from what you really want to achieve bottom line .. I have a 4GB card working perfectly smooth. Not sure, but I guess it is not a SDHC card. So is it really the SDHC you are looking for, or rather "just" a large sized card?
If you want I could check for the supplier.
FordPrefect said:
Depends from what you really want to achieve bottom line .. I have a 4GB card working perfectly smooth. Not sure, but I guess it is not a SDHC card. So is it really the SDHC you are looking for, or rather "just" a large sized card?
If you want I could check for the supplier.
Click to expand...
Click to collapse
Are you talking about 4GB mini SD Card? where did you get it? I am not talking about SDHC. I got 4GB HCSD but I never have a change to make it works with my Wizard.
Yes, bottomline is that 2 GB is not enough and I am seriously looking for high capacity cards. I came to know that all the cards above 2GB are SDHC (as on sandisk and sdcard.org websites).
If you know of a 4 GB card that is non-SDHC and is working well, please do send me the supplier details. I am based in India so need to check if he can ship overseas.
Thanks.
Right now I have an authentic 4 GB SDHC card from Transcend.
Till now I have tried all the patches/drivers available here for SDHC but couldn't make this to work. I even checked after formatting the the card in FAT16.
singhravi437 said:
If you know of a 4 GB card that is non-SDHC and is working well, please do send me the supplier details. I am based in India so need to check if he can ship overseas.
Click to expand...
Click to collapse
Have a look here
http://forum.xda-developers.com/showthread.php?t=297324
singhravi437 said:
Yes, bottomline is that 2 GB is not enough and I am seriously looking for high capacity cards. I came to know that all the cards above 2GB are SDHC (as on sandisk and sdcard.org websites).
If you know of a 4 GB card that is non-SDHC and is working well, please do send me the supplier details. I am based in India so need to check if he can ship overseas.
Thanks.
Click to expand...
Click to collapse
Here is the one I bought. It is NOT SDHC, but has a 4 GB size. Unfortunately this link is to a German eBay shop:
http://cgi.ebay.de/4GB-miniSD-Speic...830230QQihZ017QQcategoryZ155794QQcmdZViewItem
Hope this will help you in possibly finding a supplier in India!
http://cgi.ebay.com/4GB-mini-SD-Car...yZ118260QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Sorry for the huge link, I dont even know if it will work so lemme know. If it does, all of that guy's 4gb mini-SD cards are non HC. From what I have read, "Topram mini-SD 4gb" cards from a certain batch are non HC and work with the wizard. I ordered one from the person in the link and it has been working fine so far. Hope this helps.
Is there a difference between the cards themselves or is it just the formatting?
endolith said:
Is there a difference between the cards themselves or is it just the formatting?
Click to expand...
Click to collapse
the formatting and the hardware logic is different. there are differences internally, but externally they appear to be the same.

SD or SDHC?

Morning all,
I currently use 1GB Sandisk SD card for my XDA II Himalaya. As TomTom size is increasing day by day, I was looking for an 8GB SD card however when I searched online, it said SD over 2GB are now SDHC (SD High Capacity cards) and the devices need to be compatible to be able to run it.
My question is, Does Hima XDA II supports SDHC cards? (I am using Ather 6.14 ROM Mobile version 6).
Could someone please help on this matter before I make a buy?
Here is the link to the Hima I have :[http://www.gsmarena.com/o2_xda_ii-697.php]
Here is the link to the SDHC I am looking at : [http://www.play.com/Electronics/Electronics/4-/4949650/SanDisk-8GB-SD-HC-Card/Product.html]
Many thanks
Regards
Jehanzeb
Hi,
Himalaya does not support SDHC, only SD.
However, I have several 4gb non sdhc memory cards working perfectly.
If your search well you will certainly find them.
Three suggestions:
1 - Try before your buy. There have been mixed experiences with different brands (and sometimes even with the same brand...)
2 - If possible, go for the ones with highest speed (even if some say there is no difference...)
3 - Format the sd card in the device...
Regards,
P
Thanks Pdc4, I really appereciate your help in this.
I am looking at Sandisk ones, they are quite good and faster then other brands.
Will check out and find out if I can find one which is only SD.
Many thanks
Kind Regards
jehanzeb

4GB Micro SDHC card

Good day all! I have a HTC Wizard and I cannot get it to read a Lexar 4GB Micro SDHC card. Please help! anything would be appreciated...
From What I have read (did some searching for you)
http://forum.xda-developers.com/showthread.php?t=420767
http://forum.xda-developers.com/showthread.php?t=422438
http://forum.xda-developers.com/showthread.php?t=313849
SDHC appears to not be possible with your device - Hardware limitations - I suggest you read through the entire threads to make sure. A good place to start anyway
If i'm not mistaken you can get a MiniSD card with 4GB which isnt HC...
Unfortunately the Wizard only supports miniSD which maxes out at 2 GB.
feanor512 said:
Unfortunately the Wizard only supports miniSD which maxes out at 2 GB.
Click to expand...
Click to collapse
No there are four gig miniSD Cards available. Just not that common or easily found. I found one and use it for my portable gps
SDHC cards are only functional in a handful of devices (mostly new technology after the Kaiser was released). People have been looking into it for a while with no luck. I have not seen a non SDHC micro SD card yet. Take a look in eBay, you might be able to find some in there. Good Luck!
1.i have a microSD card which isn't SDHC.
2.he doesn't need microSD ... he needs MiniSD...
and the four gig mini sd cards are not sdhc. Just not that easy to find
nir36 said:
2.he doesn't need microSD ... he needs MiniSD...
Click to expand...
Click to collapse
I stand corrected

MiniSD adapter with microSDHC?

Hi,
I'm using miniSD adapter with microSD card, but when I tried to put microSDHC card it didn't working. Is there any software to make it use? Or it is hardware problem?
In order to have possibillity to use sdhc cards u should install this first. Then plug your sdhc card, it's likely to work. But i havent tested it by myself. Note: this driver dramatically drops sd-card read/write speed.
tornado does not support SDHC standard
mato-peto
Already does!
Read my previous post more attentively...
Some people confirm this driver to work on Tornado and on StarTrek as well.
They could use 4gb sdhc card!
Oh My !!!
It works!
There have been so many tries getting this to work and now it works.
I used a 8GB micro-sdhc card (with converter tot mini) and it works!
thanx a million!
myzhLAN said:
In order to have possibillity to use sdhc cards u should install this first. Then plug your sdhc card, it's likely to work. But i havent tested it by myself. Note: this driver dramatically drops sd-card read/write speed.
Click to expand...
Click to collapse
Thakns for this!! It works!! Really read/write speed is much lower, but I think that OMAP CLOCK can help in this case.
doesn't work for me..i use the orange spv c600 version of the htc tornado,installed both c550_and_650_sdteam drivers as well as Cotulla sdhc but none worked..i'm using a mini sd card 2gb and a mini sd-micro sdhc card adaptor for the 4gb class 4 kingston card....with first drivers after install i still can see the normal card,not the sdhc,but after installing cotulla drivers(removing the others first) doesn't work al all either of the cards !! wtf? i use wm 6.1 standard
Interesting. I use the following rom:
WM6.5 Standard ENG OCOS 5.2.21234(Build21234.5.0.1)ver.1.0(Full and Lite) by Gregorys
i installed the full version of this rom with the Cotulla sdhc driver found in the link. (Be aware that you should install 2 cab-files, but this is stated clearly in the readme.txt)
Maybe there is something in the rom as well that we need. why don't you install this rom and try...
10nx for the tip...the phone i have bought 2 days ago ,caught a bargain with full package at 40 dollars,already with a wm6.1 installed...but i'm not satisfied about it,has a few bugs...not sure who's version is it now,but i will install the gregorys version......hope it works after the new rom,it's good to be known that not all wm6 roms work with sdhc
jOnly works with micro SDHC plugged into the micro SD to mini SD converter and then used with tornado
the standard mini SDHC doesnt work. and this way there is no significance of SDHC's advantage of speed. isntead speed is dead slow
Follow up the analysis of the driver packages and the final solutions in the thread "SDHC Finally Works !!!!!!" (seems not all who wrote here are also there).
Keep the Tornados alive!

Categories

Resources