Related
i've heard that WM2003 in himalaya gadget can be uprade to WM2005, it's very interesting and i going to try the uprade, but i have some question about the upgrade, my question is:
1. what's the risk during upgrading? could my device occuring some permanent error?
2. what's the consequence of this? will my device working slower? or working faster?
3. if i don't satisfy with the WM2005 can i downgrade back to the WM2003 OS?
please help me by answering my question
Response:
1. the device may fail, but you can restart the whole process entering the device in bootloader mode and upgrading (happen to me once)
2.Your device will work Faster but sometimes (at boot sequence) will be slower.
that's the price you have to pay. Other thing is there is no MMS in WM5 (dont work for me) and some camera issues, that can be fixed. But is more eye-candy than the WM2003 or 2003SE.
3. If you aint satisfied you can go back to 2003SE just putting the device in bootloader mode and then making the upgrade using a WM2003 ROM (the nbf file)
One thing: Tofclock and Buzz (thanks guys!) are working hard to bring us one stable, better and faster WM5 ROM, so be quiet and wait like me :wink:
Hi guys,
I ve also heard that after you upgrade to Wm 5.0 the phone vibratin wont work, is that true?
what else then?
:roll:
Thanks
Hi dickyw,
my vibration on my Himalaya works perfect...
Hi Guys,
Can anyone help another dumb newbie?
I upgraded my Himalaya to W2k5 OK from the O2 exe file, but I now want to downgrade to 2003 SE.
The folder I am trying to use to downgrade is WindowsMobile2003SE_XDA2_2.20.00CHS-translated.zip
Himaupgradeut.exe gives:- Error 120 Country ID error 1-1-8-n-1
HimaupgradeUt_noid.exe gives:- Error 103 ROM image file not found
XDA image tool gives me:-Unsupported file format error for NK.nbf
I have:-
Boot loader 1.06
CE image 1.72.00
Extended image 1.72.181
Radio image 1.17.00
Am I using the wrong tools, the wrong ROM or an incorrect procedure? I'm doing this for a friend so it's getting very embarassing. Any advice would be gratefully appreciated.
Thanks, Mike
Another issue to aware of when upgrading to WM5 is that you need to also upgrade to Activesync 4.1 as 3.8 won't work any more. Given that AS can be very tempremental it may take some time to get the sync link back up and working to your satisfaction so if your data is cruitial to your work then backup, backup, backup and upgrade when you have a few days free to dedicate to ironing out any wrinkles.
Then also xbackup doesn't work in WM5 so you are left with options like buying the latest Sprint backup soiftware (now WM5 compatible) or relying upon your PC Outlook to be your "backup data" (NB I use the Outlook free "backup" util to back up my pst files on exiting Outlook as double insurance).
Regards - Mallow1
PS I upgraded and v glad I did. Had a few AS issues but eventuall got there (took a lot of reading of forums and As battles, but worth it in the end)
cnimike,
One assumes that you have unzipped the zip file first before trying to reflash? If not try that (say use winzip). Also try reading the wiki as a guide to what to do (seee link attop left of page).
You are also best o use the HimaupgradeUt_noid.exe as at least it avoids the first error (esle you'll have to edit the flash files first and recompile them which is straight forward but if you are a noobie it's a step that can be avoided by using the "...noid.exe") and if you haven't unzipped the said file doing that may well sort out your second error.
Get back to me if you need more help.
Regards - Mallow1
cnimike said:
The folder I am trying to use to downgrade is WindowsMobile2003SE_XDA2_2.20.00CHS-translated.zip
Am I using the wrong tools, the wrong ROM or an incorrect procedure? I'm doing this for a friend so it's getting very embarassing. Any advice would be gratefully appreciated.
Thanks, Mike
Click to expand...
Click to collapse
I would suggest getting a hold of Sin's merged version (details in signature) or XDA2JoJo's version. Simply flash the ROM and you are there. Elsewhere, SIN has set out the steps in the most detailed fashion you are going to see outside a software manufacturer's manual. :wink:
When I try to upgrade my i-mate JAM to a new special ROM from Kichen after a step this masage apears "Cannot execute the remote comunication program. Plese make sure that the USB/Serial cable is properly connected.
so guys plz help me urgent
Does the same error come up when you flash with a shipped-rom which hasn't been changed?
Does your device respond to any commands from the update program? If so, what happens on your device?
And what did you change in the rom?
As you probably guessed: I don't know an answer to this & i'm trying to figure out what is different in your setup compared to a regular update.
Regards, M
Thanx 2 reply
No dear every thing is OK When I try to update with shiped ROM it works 100% no problem. When I click in my computer the device is located and opens software installs nothing abnormal every thing is as usual, But when I try to update it with special ROM (got from Kichen that I like very much) the folowing masage appears
I guess that romkitchen isn't compatible with magician :-(. You can try to put in the GetDeviceDara.exe from a shipped-rom in the appropriate romkitchen folder, maybe it helps. Cause I love to see this working.
Good luck, M
Let me do it
The rom I got is for windows 2003 SE so I think it should work, now let me act your advise then i'll inform you.
regards
The same problem i have
I try to update one of my friends i-mate JAM in a dfrent PC but the same problem I got. I think the rom is not compatible with JAM. Do you know another ROM to work on my JAM like available in Kitchen???
Well I haven't experimented with RomKitchen & don't know what you want to achieve with it. Ext-roms can be edited with bal666's tool too & there are loads of different (not edited) ext-roms @ the ftp.
& of course there's the BIG Storage hack, with which you trade in the ext-rom for an enlarged internal Storage folder.
Haven't seen anyone yet who really edited the CE image :-(
M
Yes I tried but...
I tried big ROM but in 3rd stage the folowing masage appears "card incilize error" When it tries to back up ROM on SD card. I have MMC not SD Now may be this is cause or somthing other. Have you updated your device with big storage rom & is it OK???
If so I'll try again
I downloaded the ROM form this site http://www.romkitchen.de I updated one of my friends PPC from this site's Rom its performance is 50% increased. but mine (JAM) is not going to update
I did it with a patched shipped-rom :!: Follow this link & I think you should be able to manage http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
RomKitchen is also on this forum, but I think it's for other devices. You can find it in the wiki.
Cheers, M
Ok let me do it
Thanks dear let me download and check it. One thing that my JAM is from i-mate & there is T-mobie ROM, but its for Magician so should I do it no problem? Will I be able to reload its shiped ROM that I have already. sorry for my broken english
Yes it's no problem to use another magician rom, use maupgradeut_noid.exe to bypass country id error. To flash your current shipped-rom back just follow the same procedure.
Be carefull to backup your current ext-rom cabs though, they do contain some operator specific settings for eg gprs, voicemail etc. You need to install some of them instead of the TMO ones present in the TMO 1.13WWE rom. You can use WinCE cabmanager (available on trial) to have a look inside the cabs & decide wich ones to use.
This is my list of the Dutch TMO 1.13WWE ext-rom cabs anyway:
BlueTooth patch:
BTHUSB_PATCH_AKU26.CAB
MMS:
CAB-Acrosoft-MMS-2.5.0.28-ENU-MagicianAKU2.6-13May06.CAB
Needed in combi with MMS (does contain Dutch T-Mobile specific settings though)
CAB-Customization-Magician-TMONL-03Jun05.CAB
Certificates:
CAB-Certificate-TMO-16Sep05.CAB
Email wizard:
CAB-EmailWiz-2.0.0.6-PPC-TMNL-ENU-09Aug05.CAB
Java support (midlet manager):
CAB-TaoJava-10.1.2.76-PPC-ENU-17Aug05.CAB
Caller ID:
Caller_ID_Magician_T-Mobile_WWE_RC22.CAB
Camera & album:
Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB
To hide the ext-rom:
Delete_vdisk_shortcut_WWE.sa.CAB
IntelliDialer (with T-Mobile colors, other skins avalaible on the forum):
IntelliDialer_Magician_T-Mobile_WWE_RC20.CAB
IntelliPad (T9 for Slovak, Polish, Hungarian, German, English, Dutch, Czech):
IntelliPad_Magician_T-Mobile_WWE_RC20.CAB
Remove current PIE favorites:
Remove_Favorites_MA_TMONL_112187.CAB
New battery.dll & wavedr:
THB_MDA_COMPACT.CAB
T-Mobile sim toolkit, theme, sounds, carrierlogo etc.:
TMNL_Customize_113125.sa.CAB
SIM manager:
TMNL_OperatorName_MA112178.sa.CAB
UserAgent settings:
UA_Profile_TMO_Compact1.1.sa.CAB
Start menu customization, Today plugin settings & T-zones:
UXC_Magician_T-Mobile_WWE_NL_RC25.CAB
Set the version to 1.13WWE
Version_WWE.CAB
Zip support:
Zip_Magician_T-Mobile_WWE_RC20.CAB
Success, M
thanx
Ok thanks a lot
regards
Hi.
My experimental ROM for Wizard. NOT for normal use.
Build 21042, WWE.
Free RAM: 31,5 MB (Pagepool 5,25 MB)
Driver don't touch.
UC in Storage Card\ExtROM
Without any programs. VERY Clean.
WMP Playing in sleep mode.
Gestures turned off.
Unlocked for read & write Extended ROM partition, is visible in File Explorer as new 10-megs storage card "TrueFFS FATFS Partition". Is resistant for Hard Reset!
Plz flash & report on G3. PLEASE DON'T FLASH ON G4!!! You can BRICK your DEVICE!
Download is limited to 10 times.
http://rapidshare.com/files/310797972/HTC_Wizard_Clean_21042_ALPHA_Ham3r.7z.html
Will try on G3 and G4 and let you know tomorrow or Friday.
I will try G3 first then G4 so that one phone always has a known good ROM.
G3 Results and ROM Review
Installed successfully on G3.
First impression: a good and fast naked 6.1 ROM.
No connection wizard, but after I hand-entered my GPRS settings it worked fine.
No .NET compact framework, I installed 3.5, and was able to run apps like Advanced Configuration.
TrueFFS filesystem works!
I have been waiting a long time for this!
After installation without SIM Card:
44.89MB Storage free; 30.80 MB Program free
After reset: 45.73 & 31.76 (without SIM)
After reset: 45.58 & 30.95 (with SIM)
Applications:
ActiveSync
Calendar
Camera
Comm Manager
Contacts
File Explorer
Pocket Internet Explorer
Internet Sharing
Messaging (SMS and Email, no MMS)
Notes
Phone
Pictures & Videos
Task Manager
Tasks
Windows Media
AltTab
Smartskey
(Did I miss anything?)
I will keep this for a few days at least, and report on its stability.
I am using HTC Home Screen, to keep things simple.
Tomorrow expect a report on the G4: I am curious to see how the Extended ROM works on that model.
Thanks for cooking.
Thanks, I know that it works on the G3. Not responsible for damage by flash on G4!
PLEASE DON'T FLASH ON G4. You can brick you'r device!
Okay, I won't try on G4.
The experience on my G3 has been quite good. The ROM is minimal but stable, fast, with plenty of RAM. I have loaded it with many apps, switched to threaded SMS, etc, and it still has over 20M free ram. My only complaint is a matter of personal taste: I really like the finger scrolling that comes with Windows Mobile 6.5 and some of the TouchFlo 6.1 ROMs.
But I will keep this on my G3 for a while.
Hi,
I can not download it from rapidshare, "limit reached" ...
Please give an other download link .
Thanks
Ham3r said:
Hi.
My experimental ROM for Wizard. NOT for normal use.
Build 21042, WWE.
Free RAM: 31,5 MB (Pagepool 5,25 MB)
Driver don't touch.
UC in Storage Card\ExtROM
Without any programs. VERY Clean.
WMP Playing in sleep mode.
Gestures turned off.
Unlocked for read & write Extended ROM partition, is visible in File Explorer as new 10-megs storage card "TrueFFS FATFS Partition". Is resistant for Hard Reset!
Plz flash & report on G3. PLEASE DON'T FLASH ON G4!!! You can BRICK your DEVICE!
Download is limited to 10 times.
http://rapidshare.com/files/310797972/HTC_Wizard_Clean_21042_ALPHA_Ham3r.7z.html
Click to expand...
Click to collapse
NICE!
Working correctly in my htc8125! very fast! thanks for your time!!!
best regards!
Please upload it again, or give an other download link ...
Thanks
One day
One day using it and for the moment no problems! excelent, fast!
thanks again!
download link is broken please upload it agian on mediafire or hotfile or megaupload
Is write-access to Ext-ROM realy working? How did you do it?
Why not flashing to a G4 Wizard? Is IPL/SPL included?
this rom had abilities to brick G4 devices since to unlocked ExtROM.
yes, read-write ExtROM is working really great, but only on G3. I have in this cabs
Flashing a selfmade Ext-ROM and unhiding an EXT-ROM is no problem for a G4 device. I did it more then once and never had a problem. (Information that a G4-Save ROM must not have an Ext-ROM are wrong! IPL/SPL must not be included!)
Is unlocking (write access) realy a problem for a G4? Did anyone test it?
Can anyone provide information on how to unlock the Ext-ROM or do I have to flash this ROM to check the reg-keys for my self?
Once again please ...
New download link please ...
Thanks in advance ...
Cyberdyne said:
Flashing a selfmade Ext-ROM and unhiding an EXT-ROM is no problem for a G4 device. I did it more then once and never had a problem. (Information that a G4-Save ROM must not have an Ext-ROM are wrong! IPL/SPL must not be included!)
Is unlocking (write access) realy a problem for a G4? Did anyone test it?
Click to expand...
Click to collapse
It's tested. ROM for G4 with write access is *NOT ENFORCEABLE* for simple cooker (like me), may be for person from HTC with Wizard's source code for Platform Builder. In this rom ExtROM, IPL/SPL are not included. But after flash into G4.. you device are bricked in 50%..
1. On G4 after flash, you Wizard stay on 2nd screen (IPL/SPL/GSM/OS).
2. After reflash OTHER WORKING ROM, device stays on 3rd screen (welcomehead), you don't can calibrate screen, but system after delete "welcome.lnk" from statup working without touch (like smartphone with pro rom)!
on G3 works very good.
of course, it's amazing.. i don't know how to repair this
Please release this ROM again
I was one of the ten to get this experimental ROM, and it was quite good.
Now, alas, I have lost my copy.
Ham3r, could you please release this again, perhaps after fixing anything you didn't like the first time? Put "G3" in the title so we don't mess up G4 phones.
I installed several applications onto the extrom, including spb mobile shell, and saw no problems with reading or writing. I don't know how the read and write speeds compare with normal internal flash. It would be good to know that, to better decide what to install in what area.
Also, can the same TrueFFS driver be used in WM6.5?
n2rjt said:
I was one of the ten to get this experimental ROM, and it was quite good.
Now, alas, I have lost my copy.
Ham3r, could you please release this again, perhaps after fixing anything you didn't like the first time? Put "G3" in the title so we don't mess up G4 phones.
I installed several applications onto the extrom, including spb mobile shell, and saw no problems with reading or writing. I don't know how the read and write speeds compare with normal internal flash. It would be good to know that, to better decide what to install in what area.
Also, can the same TrueFFS driver be used in WM6.5?
Click to expand...
Click to collapse
I cooking new rom (with office, games..). Speed of internal and extrom is the same (extrom is on internal flash yet, but is on seperated partition). Driver is the same for Internal and ExtROM. I tested WM 6.5 with unlocked ExtROM, works "so good!"
btw. my roms are on my 4shared: http://www.4shared.com/dir/11060505/134ad87f/sharing.html
Ham3r said:
I cooking new rom (with office, games..). Speed of internal and extrom is the same (extrom is on internal flash yet, but is on seperated partition). Driver is the same for Internal and ExtROM. I tested WM 6.5 with unlocked ExtROM, works "so good!"
btw. my roms are on my 4shared: http://www.4shared.com/dir/11060505/134ad87f/sharing.html
Click to expand...
Click to collapse
Share please the password on an insertion ...
Thanks, are not necessary, have already understood ...
it's: Ham3r
may be..
btw. my Wizard is dead. I have bricked G3 only with flashing ROM & correct SPL. heh.
upd: i have new wizard
This OSKitchen is already setup for GSM Palm Treo Pro all you have to do is follow the tutorial and then your good to go. If you encounter any problems please tell.
Credits
Mord4z (For his builds)
Raiderfan247365 (For his builds)
Airxtreme (For his Kitchen)
Icongene(For his Reboot EXT)
Download Here
Place the Add-Ons in Windows Mobile Builds Folder
Code:
Sources>Windows Mobile Builds
Mord4z's 21884 build
System Requirements:
Microsoft .NET 2.0 (.NET 3.0 and 3.5 are 2.0 based so those work as well), already preinstalled on most computers, the kitchen won't start without it so it's easy to find out if it's missing
The following three system requirements also are preinstalled on most computers; the kitchen will warn you if they are needed so don't worry installing them unless required:
Microsoft Visual Studio 2008 runtime, required by xidump during the importing process
Visual Studio 2003 (7.1) Runtime Libraries, required by platformrebuilder to solve the "cereg400.dll cannot be loaded" error message, required by XIDump to solve the "Failed to init decompression!" error message and required by IMGFSFromDump to solve the "Unable to load compression DLL!" error message.
XmlLite Update Package required to solve the "Unable to load LibNB.dll" errors (only for Windows XP SP2)
!!!TUTORIAL!!!
1.Extract kitchen
2. Under Devices select "Palm Treo Pro"
3. For Device Profile select "default"
4. Select SYS Build
all builds 21056 and under are 6.1 builds
all builds 23xxxto 28xxx are 6.5.x
5. Select Language of choice
6. Select Compression (XPR recommended, LZX does better compression but it is rumored that it will slow down system performance)
7. Move To SYS Packages Tab - Disable Anything You Do Not Want (Do Not Disable Essential Files!! also might want to read description section to see what each package does)
8. Skip OEM Tab everything is essential
9. Move To EXT Packages Tab - Disable Any Unwanted Packages (Make Sure You Go To This Tab Their are packages that you would not like OSKitchen selects all EXT's as Default)
10. Move To Advanced Tweaks Tab - IF YOU DONT KNOW WHAT IT DOES DO NOT TOUCH IT!! Setting the Pagepool to 0 is recommended.
11. Press Start Building at top
12. Once ROM cooking is completed the kitchen will ask if you would like open the folder where the .nbh file was output, select yes to open the folder then when in folder run ROMUpdateUtility.exe and follow the onscreen instructions.
HELPFUL TIPS
-Start Slow, build a ROM with not much extra then work from there
-I would generally keep Phone Canvas Enabled
-If a package has (6.5.X) at the end, this package is only for 6.5.X SYS builds
-Only choose one Animation
-If you included Office 2010 EXT disable The Office and OneNote SYS files
-Calibration Data can be read using PHM Reg Editor looking at
"HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH"
BUGS:
-21905 SYS has battery meter issue (does not change)
-Waiting Cursor does not work in Build 23547 use Mord4z's fix on third Post
EXT's
V 1.30 has a CAB to EXT converter you can use that to convert your apps that you would liked cooked in I will still update this Post with new EXT's
HOW TO CONVERT CABS TO EXT
Click on package converter at top
In source select CAB Installer File/HTC ROM Hotfix
Browse to the CAB that you would like converted
In destination section next to Device select Palm Treo Pro
Next to group select Packages_Palm Treo Pro
In the text box next to name name it what you would like that EXT package to be called
In Import options Sections its up to you if you would like to check that box or not
Press convert and your good to go
EXT's not in the download on first post
Put these files in
Sources>Devices>Palm Treo Pro>EXT Packages>Packages_PalmTreoPro
F-Secure AntiTheft
If you have any requests for EXT's I would be happy to add them
Have Fun cooking and Mord4z and me would like to see more development in the GSM Section
Quick Tutorial for Ervius Kitchen
Credits
Ervius
NightRaven
AcidHax
Download NightRaven's Modded Ervius Kitchen http://forum.xda-developers.com/showthread.php?t=583685
Download Acidhax's Pre Sorted Builds http://forum.ppcgeeks.com/showthread.php?t=97200 or download OSKitchen from 1st post and use this sorter to sort the builds from OSKitchen to Ervius Kitchen http://forum.xda-developers.com/showthread.php?t=542081
after sorting and putting the builds in Ervius kitchen folder open Ervius Kitchen
at top under Devices select Panther100
then under Language pick the language code of your choice
under XIP and SYS select the build you would like to cook NOTE: XIP and SYS have to be the same number build
then scroll down to EXT and pick EXT of choice
Press Create at top left and wait for ROM updater to come up so you can flash
Treo original OEM's with 5 langs here
Some fixes:
Wait cursor: http://www.4shared.com/file/X0XvRDIw/wait_cursor_fix.html => use if you have some issue with wait cursor, like "never end wait cursor in homescreen".
Alt keys fix: http://www.4shared.com/file/dffTgwKD/AltKeys_v3_0_33297_0.html => the altkeys sign don't want to appear ? Try this fix.
Dialer fix: http://www.4shared.com/file/134jApeY/PATCH_dialer.html => to solve the blurry contact list issue
mord4z said:
reserved for future use!
Sorry for the delay, I got a motorcycle accident here (I'm still alive but my motorcycle no )!
Click to expand...
Click to collapse
Sorry to hear abt ur accident Mord4z but glad 2 hear u r ok...u n trickbiker121 do a great job on here...Thanx..The above tutorial looks pretty str8 4ward 2 me and i'll see if i can't in my spare time make some future contributions to ur work...But nw? got regular lectures to prepare 4 ..
voncrane said:
Sorry to hear abt ur accident Mord4z but glad 2 hear u r ok...u n trickbiker121 do a great job on here...Thanx..The above tutorial looks pretty str8 4ward 2 me and i'll see if i can't in my spare time make some future contributions to ur work...But nw? got regular lectures to prepare 4 ..
Click to expand...
Click to collapse
this week is also busy for me because i have finals and state exams going on and so i might not be on XDA as much as usual
i have yet to get spb tv to work correctly... just fyi
raiderfan247365 said:
i have yet to get spb tv to work correctly... just fyi
Click to expand...
Click to collapse
thanks for the info
Hey Trickbiker, May i presume that the kitchen found on http://forum.xda-developers.com/showthread.php?t=628948 is better than d above?....I know its Alpha n all but can't shake d idea that its better featured...
voncrane said:
Hey Trickbiker, May i presume that the kitchen found on http://forum.xda-developers.com/showthread.php?t=628948 is better than d above?....I know its Alpha n all but can't shake d idea that its better featured...
Click to expand...
Click to collapse
it is better with the cooking then the above but i havn't tested it im going to wait until it is out of Alpha and the automatic creation of DSM isn't really important because all of the builds i released still have the DSM files but the DSM sorting in EXT's is a good feature
trickbiker121 said:
it is better with the cooking then the above but i havn't tested it im going to wait until it is out of Alpha and the automatic creation of DSM isn't really important because all of the builds i released still have the DSM files but the DSM sorting in EXT's is a good feature
Click to expand...
Click to collapse
Same here...Gonna wait till its nxt stable release (hoping its soon).
voncrane said:
Same here...Gonna wait till its nxt stable release (hoping its soon).
Click to expand...
Click to collapse
i would try the new release but every day a newer version comes out and it gets annoying repeating the steps everyday. Did you make your perfect Rom yet? Do you have any questions or suggestions?
trickbiker121 said:
i would try the new release but every day a newer version comes out and it gets annoying repeating the steps everyday. Did you make your perfect Rom yet? Do you have any questions or suggestions?
Click to expand...
Click to collapse
Just tried using the Alpha Kitchen version to build my own ROM...only to find out i need an original 6.5 ROM to work wit...i don't have dat so i just might have 2 work with OSKitchen V1.30 above since it enables me to work with pre-existing 6.5.5 builds....
P.S. Didn't know ROM building involved extensive reading
Just flashed IMZ_KING 65_23549_RealVGA_Updated's ROM from ppcgeeks forums..RealVGA looks beautiful and seems to work flawlessly but i uninstalled the ROM cuz for some reason, it refused to play ANY sounds(like its on system silence mode or something)...Just flashed Mord4z's 21884's Build...gonna play with it for some days while i cook up a personalized 21903 build...So what do u mean by choosing just one animation?
P.S...Only F-Secure Anti theft EXT link's working,pls check others..
voncrane said:
Just flashed IMZ_KING 65_23549_RealVGA_Updated's ROM from ppcgeeks forums..RealVGA looks beautiful and seems to work flawlessly but i uninstalled the ROM cuz for some reason, it refused to play ANY sounds(like its on system silence mode or something)...Just flashed Mord4z's 21884's Build...gonna play with it for some days while i cook up a personalized 21903 build...So what do u mean by choosing just one animation?
P.S...Only F-Secure Anti theft EXT link's working,pls check others..
Click to expand...
Click to collapse
thats good to here that RealVGA looks good i know there is a thread that gives you an OEM package for 6.5 ROMs maybe you want to check that out http://forum.ppcgeeks.com/showthread.php?t=103745 choose one startup animation in the EXT because there is no option to select which animation you want on the phone. i will remove the links but i don't have time to reupload them and i really wanted to release Ervius kitchen tutorial but i have been really busy this week that i wasn't able to and i am going to UK next week and won't be back till August and i don't know if i will have acces to the computer i will try my best to get things done before next week
What rom are you cooked from?
6.1 or 6.5
Can you cook a rom with M2D inside?
xuiquaxa said:
What rom are you cooked from?
6.1 or 6.5
Can you cook a rom with M2D inside?
Click to expand...
Click to collapse
it has both 6.1 and 6.5 you can cook manila 2D by going to EXT in OSKitchen and checking all three manila packages under comments it will tell you if it is a manila package
I'm using 23549, it's ok but i can't found task manager in home screen.
Do you help me to find upgrade of this ROM
xuiquaxa said:
I'm using 23549, it's ok but i can't found task manager in home screen.
Do you help me to find upgrade of this ROM
Click to expand...
Click to collapse
23xxx and 28xxx builds lose the quick task manager you can use the keyboard shortcut whick is option and OK hope this helps
Made it more easier for you to pick only the builds you would like to build
I finally got a working recook of the Telus 6.1 dump for the HTC Snap (S510).
Update July 30: first attempt(s) using blank ervius v1.8 kitchen resulted in errors crashing platformrebuilder.exe, so rather than starting with a blank kitchen, I started with JMZ Snap Kitchen
(from h t t p://forum.xda-developers.com/showthread.php?t=670401)
1. using the kitchen, I dumped the "8-27-2009 Verizon Wireless Ozone ROM 1.12.605.30" recooked rom to borrow the payload
(from h t t p://forum.xda-developers.com/showthread.php?t=550863)
2. then I processed the Telus dump
(from h t t p://forum.xda-developers.com/showthread.php?t=712931)
>tools\IMGFS\ImgfsToDump.exe Part02.raw
>tools\IMGFS\ImgfsFromDump.exe Part02.raw imgfs.new.bin
>tools\IMGFS\ImgfsToNB.exe imgfs.new.bin 0_OS.nb.payload telus.payload
(this copies all data except the IMGFS partition from os.nb.old.payload to os.nb.payload, then adds the IMGFS partition from imgfs.new.bin)
3. back to the kitchen, dump the telus payload which created a new kitchen directory under /dump
4. started up the new kitchen from /dump, selected the appropriate device, fill in Device ID with "CEDA****" and chunk with "64", then save and create!
the resulting nbh built with the new kitchen didn't include a splash screen, so I then flashed HTC_SNAP_Splash_CEDA.bmp.nbh
(from h t t p://forum.xda-developers.com/showthread.php?t=550863)
links to rom and kitchen in next two posts below...
link to recooked rom:
h t t p : / / www . mediafire . com/file/5i6p50osa24gpkz/FLASH_TELUS.rar
link to kitchen:
h t t p : / / www . mediafire . com/file/zmlpv0ptq4q9tw2/Telus_Chief_Kitchen.rar
Note of course that you'll need to have previously flashed the HardSPL to your telus phone before you can flash cooked roms.
I had success flashing the Snap S511 HardSPL by JockyW to my S510.
Thanks man, it flashed just fine.
Glad to be back to stock ROM. That VZW 6.5 ROM was starting to annoy me.
[EDIT]
It seems I spoke a bit too soon:
1. I can't install some apps, and SDA unlocker says the phone is not unlockable. Things like MyPhone and MarketPlace complain about insufficient system privileges.
2. 3G Data connection doesn't work. Wifi only. At least I can still send/recv calls.
3. If I try to go to Settings->Phone, I get "The settings could not be opened."
4. CDMA1X connection has a GUID under "connects to", as opposed to a drop-down menu.
Looks like something got corrupted along the way.
thanks for testing.
I'm not at all familiar (yet, becoming more so) with cooking, will attempt to address the platformrebuilder.exe error I got to see what that affects.
Update July 30: issues addressed, rom built without errors
I've successfully recooked the rom without errors crashing platformrebuilder.exe. It flashed fine and no errors as far as I can tell.
I can't check 3G data connection however since the phone I'm using isn't activated - someone please tell me if it works.
I've updated the links to the newly recooked rom and rebuilt kitchen
good rom!!!!
The new ROM works just fine. Whatever you did, it worked.
Cheers!
hello
i have telus snap s510
what is problems in this rom
my phone is unlocked
hello
i try Snap S511 HardSPL by JockyW 3 times
but not work
The link to the updated kitchen is not currently working... anyone have another link or able to re-up this?
Thanks in advance
Confirmed link is dead.