Has anyine managed to do a ROM like the new HTC Touch PDA? Would this work on my XDA Exec? Or can someone help me put the iphone theme on my XDA.
Thanks
Come on, at least look on the same page before you ask questions. The same thin's being asked further down.
Basic answer is tough luck for now, nobody has made VGA versions of either.
user989 said:
Has anyine managed to do a ROM like the new HTC Touch PDA? Would this work on my XDA Exec? Or can someone help me put the iphone theme on my XDA.
Thanks
Click to expand...
Click to collapse
following side for your info. it is not original touch application but it look very similar, check it out.
http://rotlaus-software.de/forum/viewtopic.php?id=519
Thanks alot bulldog.
AJ Im very new to this forum so please excuse me, if someone else has posted the same question. It would be nice if u were to keep you comments civil.
Oh I'm so sorry, I had no idea being new somewhere means you are unable to read the other questions posted on the very same page.
I'll bear this in mind from now on.
Thanks to enlightening me to this terrible affliction that must strike users with less than several days, or posts on their profile.
now now ladies, back to your corners.
Hi Guys,
thanks for watching. DUe to some good roms of you i upgraded yesterday my qtek s200 to wm6. Now the i love the Gui of the TouchFlo 3D. How could i download and install it on my running device.
Du i need this hdsql (or whatever).
Yess i saw many rom here in the forum but none was like touchflo 3d espacially for the messaging keyboard. I want to get rid of my stylus pen. And i think this would be a good possibility.
Thanks in advance.
Cheers,
RonLion
it's can not work on prophet
Cos' ram is less
ah, ok.
But wm 6.1 prof is possible? do you know a good rom in english.
thanks. cheers,
Ronny
The forum is full of good 6.1 roms. Suggest u spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
colink said:
Hi
For the non experienced (with xda) this forum is very difficult to find information.
...
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
Firts, I would like to ensure you that I am not flaming or anything like that.
But, I have to Agree with Colink, this is not a noobfriendly forum
I´ve just bought a S200 from a friend (I´ve been dreaming with it since 2006!) and was a very pleasent surprise to know that Prophet could run WM 6.1 (I like Touchflo 3d, but for me, is not necessary.)
So, just as Colink (I supose), I´ve spent the last week reading this forum...and XDA forum too. I´m very sure that everything i should (or even can) know about prophet, is here. There is no other place to search...
But, the volume of knowledge is so huge, that sometimes is even confuse to absorb it.
So, I agree with colink and ask, Is there any tutorial to upgrade my WM version?
I´m pretty sure that I´ll upgrade it with or without tutorial... but as since as theres so many "expert" around here and, they did so much to the whole forum... wouldn´t be hard to someone write a quick tutorial.
But, I hope you all understand, that what I´m doing here, and I supose colink too, is just searching at the best (probably) only place to find anything about our ppc... not been lazy, we are just afraid of screwing something.
Thanks!
Magliano
colink said:
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
Colink, in response to your comments above you would have read the very good guides to upgrading such as these:
http://forum.xda-developers.com/showthread.php?t=405384 and http://forum.xda-developers.com/showthread.php?t=401326 and http://forum.xda-developers.com/showthread.php?t=353547.
When i did my first flash i started with this : http://forum.xda-developers.com/showthread.php?t=315016. I then Hardspl using the guides above. The info i read recomended this way, so i used it. You will also have read from the guides about using XP not Vista to flash and also ensuring you remove all devices from USB ports and turning off other comunication s/w. The guides also offer good info on what to do when it goes wrong. If you do flash 6.1 rom and it goes wrong, then you can revert back to 315016 thread (aku 2.2 rom) as the guides say, this wil get you device working again
This post gives you links to the guides and a list of Roms, although you should check for new ones also : http://forum.xda-developers.com/showthread.php?t=377545
The wiki is also useful : http://wiki.xda-developers.com/index.php?pagename=Prophet_Contributed_ROMs
Now i hope this is both useful to yourself and d.magliano. I know that too much info is always a head wrecker, but really the guides are very good.
Hi Timmymarsh
Thanks for the response and the guidance. I am currently reading through the links you gave.
Unfortunately in my haste, before reading your post I followed instructions for installing USPL.
I have just run start_uspl.exe on my orbit 1, after following instructions re- soft reset.
Phone is showing white screen asdescribed in tutorial
PDA ROM update utility has opened on xp laptop.
Instructed to conect via active sync.
Active sync cannot find device.
I have not touched phone and do not want to brick it.
Any guidance would be appreciated.
The phone is currently connected to the charger with white screen. I presume I will have to restart and hope for the best.
Secondly the first link you give in your reply is for 'Prophet' - do I need different instructions / aplications for Artemis / Orbit?
Thanks Colin
i'll try to help yoy
colink said:
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
(i'm sorry for my bad english), try this tutorial , it was good for me http://forum.pocketpcitalia.com/forum_posts.asp?TID=30766&PN=1
bye
colink said:
Secondly the first link you give in your reply is for 'Prophet' - do I need different instructions / aplications for Artemis / Orbit?
Thanks Colin
Click to expand...
Click to collapse
Colin, im not familiar with o2 branded stuff so excuse ignorance, but is the orbit not based on the touch cruise/polaris?
hi
Sorry my fault, I believe the orbit is same as artemis p3300 & touch cruise. I thought I was posting in Artemis forum.
I presume your links are not relevant to my phot?
If you can guide me about my current White screen / no connection problem I would appreciate it.
Thanks colink
colink said:
hi
Sorry my fault, I believe the orbit is same as artemis p3300 & touch cruise. I thought I was posting in Artemis forum.
I presume your links are not relevant to my phot?
If you can guide me about my current White screen / no connection problem I would appreciate it.
Thanks colink
Click to expand...
Click to collapse
Colink, i thought it was touch cruise hardware and ****, thats not good!! You are correct in thinking that you cannot use the prophet section in flashing. If i were you, id goto the polaris section and read how to recover. HardSPL and flashing is more complex for the Polaris, i am waiting for official wm6.1 rom before i try any cooked ones on there. If you are lucky you can recover your device by removing the battery for at least 30 seconds and try and restart, but i do fear you may have bricked your device as the SPL is one of two parts that help load you OS (apols if my descriptions are basic, i dont want to confuse)
Read the Polaris section and look for help, if not ask, but you may get rude reply. Sorry i cant help more, as i have not tried on my touch cruise yet. Let me know what happens, pm me if you want
hi timmymarsh
Thanks for your guidance. The Polaris is the orbit 2. My orbit1 is the Artemis. Not sure if it has same complexeties as Polaris.
I will follow your guidance and let you know.
Colink
Colink,
Ignore my pm and goto here, i hope it helps (ps make sure you post in the right place in future and if u ask for help, make it clear your device and steps taken and donot criticise those who try to help, unlike some who post)
pm me and tell me how it goes!
http://forum.xda-developers.com/showthread.php?t=308242
Yes TouchFlo 3D works on S200
Have a look there !!
http://www.youtube.com/watch?v=DWaGDTvwmmc&feature=related
TouchFlow for P3400
Anyone having TouchFlow 3D for HTC P3400
Touchflo 3D on Asus P750
Whether TouchFlo 3D will work on Asus P750 ?
Bobyciline said:
Have a look there !!
http://www.youtube.com/watch?v=DWaGDTvwmmc&feature=related
Click to expand...
Click to collapse
Dude, this is not touchflo3D!! google it and you'll see. that is basic touchflo with htc cube and htc home.
sriyankar said:
Anyone having TouchFlow 3D for HTC P3400
Click to expand...
Click to collapse
Erm which forum are you in?
micrographics said:
Whether TouchFlo 3D will work on Asus P750 ?
Click to expand...
Click to collapse
wtf, this is prophet forum?
can somebody please tell me how to get touch flo3d on this, all i can see is the windows mob 6.1, i have no idea what to do ahh
I'd just flash a different ROM. It'll likely be better than the stock ROM you have now and it'll have TouchFlo3D installed if you pick a ROM with it built in.
rizzleboi said:
can somebody please tell me how to get touch flo3d on this, all i can see is the windows mob 6.1, i have no idea what to do ahh
Click to expand...
Click to collapse
I can tell you.....
1st , you posted the same vague question on at least 2 forums. This one is a little better.
2nd. You need to read the sticky's at the top of the forums. All the answers should be there.
3rd. Use the search.
If you can't seem to get it working then maybe someone else will spend some time to help. But if you spend 30sec describing your issue and goto lunch.......................................then I'll do the same for you....
noellenchris said:
I can tell you.....
1st , you posted the same vague question on at least 2 forums. This one is a little better.
Click to expand...
Click to collapse
Sorry lol i panicked just a tad, and the forum is quite hard for me to find answers since ALL of my questions are basic since im new to windows mobile and this site. Anyway i got it working, just needed resetting
rizzleboi said:
Sorry lol i panicked just a tad, and the forum is quite hard for me to find answers since ALL of my questions are basic since im new to windows mobile and this site. Anyway i got it working, just needed resetting
Click to expand...
Click to collapse
I did the same thing and got flamed...lol.. I didn't mean to sound rude... Welcome to XDA , in a panic most of us quickly post first then search....lol
Slow down, glad to hear you got it working.....
one quick q: where did you a refurb fuze?
I have a couple questions in regard to upgrading my Incite, any advice would be greatly appreciated.
1) I want to upgrade my Incite to spocky's roms but I have no idea where to start so I was wondering if anybody could give me a definitive step-by-step guide?
2) if I upgrade my Incite could I ever go back to the original?
XBIOSX said:
I have a couple questions in regard to upgrading my Incite, any advice would be greatly appreciated.
1) I want to upgrade my Incite to spocky's roms but I have no idea where to start so I was wondering if anybody could give me a definitive step-by-step guide?
2) if I upgrade my Incite could I ever go back to the original?
Click to expand...
Click to collapse
Welcome to the forum
Perhaps you have not noticed this is an HTC devices only forum, so you won´t have too much atention.
Hope another member can point you into the right direction/forum
Good luck,
@ XBIOSX
Have a look here http://forum.xda-developers.com/showthread.php?t=518223 (also please use the search funtion)
@ orb3000
Allways posting the same answers don't help to much to this forum.
All of us or 99% of us allready know that this is a HTC forum, but with the kind of answers that you give to the begginers, don't give them the chance to think that perhaps they will buy a HTC in the future.
User22 said:
@ XBIOSX
Have a look here http://forum.xda-developers.com/showthread.php?t=518223 (also please use the search funtion)
@ orb3000
Allways posting the same answers don't help to much to this forum.
All of us or 99% of us allready know that this is a HTC forum, but with the kind of answers that you give to the begginers, don't give them the chance to think that perhaps they will buy a HTC in the future.
Click to expand...
Click to collapse
I´ll be aware of your recomendation
My only intention is to let clear for newbies the orientation of the site, wich of course 99% of active users know.
Also I don´t want to encourage anyone to buy an HTC, that desicion has to be made individually
You can see down on this thread why I give that message every time, so people don´t waste time
I'm sorry I posted here but I had no idea this was an HTC only forum.
XBIOSX said:
I'm sorry I posted here but I had no idea this was an HTC only forum.
Click to expand...
Click to collapse
No need to be sorry mate
Just wanted to let you know so you don´t loose your time waiting instead looking on the right direction
Good luck on your search!
I need help....by jaq3 display goes blurry but when i turn the screen off and then turn it on again.....the display is ok then....
Welcome to forums
Hope this link helps:
http://www.totalpda.co.uk/forum/i-mate/
no luck for me....
posting my problem in this forum doesnt helped me at all.. I think i must figure something by my self....thanx.....for nthing...
Your problem is that you have posted your query in forums which are dominately for HTC devices with only a few non-htc devices recently added. This is why Orb steered you towards a different forum where users knowledge would be more suited
Also, you attitude on last post probably didn't help either
sorry for my attitude...
solution
xeevil said:
sorry for my attitude...
Click to expand...
Click to collapse
come to this thread and update ur jaq3 to windows 6.1 and ur problem would be solved.
http://forum.xda-developers.com/showthread.php?p=5507734#post5507734
Thanks...
AOA..Thanks for your reply Naveed..I'l definately try your method and will give you a reply..Are u sure this will work?
yup...it worked for me...so it should work for you as well!