Database Info

calling card feature

Hello
I was wondering if the XDA EXEC has this feature where the details of a calling card is stored in the phone.
and when you call any number, the phone prompts you whether you want to use the claling card or not. if you do then it sends the calling card details(the access number followed by the pin number) and then dials the number.
saves a person the hassle of dialing in the access number and the pin number, also one does not need to memorise the pin number

calling cards issue

Guys i am an ex-sx56 user moved off to treo (600 and then 650) and am back to the wizard... I had a phone dialer tool "TAKEPHONE" in the palm world that I used to use and was very handy for phone dialing.
I had a rue setup if there is any number starting with +44 it used to use one calling card and dial the 1800# and with for me to click another button then dial the Pin and the automatically dial the number. That way I never had to change my contacts so that when i am here in the US i use the calling card and when in am there un UK i disable calling card and all the numbers are workable and no updates needed...
I am missing this utility as I travel a lot and dial international a lot… I have looked and have not found any decent tool to do the same.
I looked at the long distance dialer but did not work well with WM5.
I am willing to write some tool if I can get some tapi API in MS.net I have written a utility to make the call now I need to get it to check the state of the line and dial extra digits which I cant figure out
In WM5 I managed to partially solve the problem where I create a new contact with 1800XXXXXXXppYYYY where x is the calling card # and Y is the pin after doing this my calling card service is looking for the actual # it also allows me to fins a number but when I click it it dials another call instead of keying in the digits on the first call….
Not sure if I am expressing this clear but I need help.

I will pay for this kind of app.
I am using long distance dialer , it works ok on my HTC wizard
but I would like to have the one you talking about

Dialing "p" for wait

Hi,
in the old (and current I believe as well) Nokia phone - and most other pure mobile phones for that matter - you can dial a "p", typically by holding down the "*" for a while. The "p" makes the phone wait a little while before continuing to dial the rest of the number.
I need this feature!!!
I am using some prepaid phone cards for which this feature is really necessary.
So, anyone have a clue how to get a similar functionality on WM5? The "p" certainly does not work ...
Thanks in advance - Andy

if you're dialing live, you can dial only the connection number then open the keypad to dial the rest of the keycode manually. If you want to automate it, create a contact with the full number and you can enter in "p" there.
I have a contact for my voicemail which dials the voicemail and waits and the pin + #. this works great with voicecommand cause all I have to do is say "call voicemail" and it'll dial, enter in the password automatically and I don't have to touch the phone at all...

Interesting ... I did migrate all my number from my previous phone, where i had the "p" included in the number. The numbers also seemingly came up correctly on the PPC phone. However, when I tried to dial the number, it would not take the complete number with the "p" - I cannot remember exactly what it did, but it did not dial the whole thing. Thats why I thought/ hoped that there is another way. I guess, after what you are saying, I should give it another try ...
And yes, the application that you are describing is very similar to what I want to use. There is a prepaid international call provider, which has a local dial-in number and lets me call abroad for very little money. I call the local number - the service provider recognizes my account by the incoming phone number of my mobile - and then I dial the destination number. For the recognising part however, it is needed that the phone waits a little before it continues to dial the destination number.

Alright, alright .... works! Thx for the assurance! Tried it again and it just takes a lot longer - the pause is longer - than it used to be on my Nokia. Also, I do not hear the dialing tones after the "p" anymore, which probably put me off before.
Thanks! Thread closed

Try replacing the "p" with a "," . It will pause for a few seconds once the other side picks up the phone.

Any software to make sending DTMF touchtones possible??

Hey guys,
I just started using Treo 750. I love it so far except few things I miss about my old Nokia. Earlier I used to dial a calling card number and then just choose the contact's destination number by selecting "Touch Tone" option from the menu while in call, and it would touch tone that number for me and I was connected. Now, WM5 phone app doesnt seem to be able to do it, and I have to write down the contact's number on a paper first before dialing calling card access number.
Also, I know a comma can be used a 1-second soft pause, but any possible way to add hard pauses in the phone number like traditional cell phones can do... Its cumbersome carrying calling card's PIN code in pocket, and then entering it after dialing calling card number and then punching in destination number from a paper again... its frustrating...
I tried to look up a lot of dialers and apps, but none was a helpful find. Could someone suggest any way out.

anybody???

http://www.google.dk/search?source=...c&btnG=Google-søgning&meta=lr=lang_da|lang_en

I am using a product called MagiCall which has the calling card feature as well as calls filtering and SMS filtering.
I think it can help you.

T-Mobile UK Users - Important Information re Voicemail Issue

Anyone using, or planning to use, the HTC Touch Cruise on the UK T-Mobile network will very probably need to do a special setup on their device to get voicemail access working properly.
The symptom is that your callers will be able to leave you voicemail messages but you will not be able to pick them up from your phone. When you get a voicemail message you will get the notification but when you press the soft key to access voicemail it will dial the number but you will then get an error message saying "access to this number is barred" and the system will hang up on you.
If you try accessing voicemail by holding down the "1" key or by explicitly dialing the voicemail access number retrieved from the network (probably of the form "+44050<your mobile number minus the leading zero>" or ""+44068<your mobile number minus the leading zero>") you will get the same message. Dialing 222 will work but will also initiate a voicemail setup message each time and however many times you switch your phone on and off to reload the voicemail settings from the network it still won't work.
I just spent 2 days with the very helpful T-Mobile support to sort this out, ultimately getting escalated up two levels in the technical support group, until I got someone who recognised the problem.
The issue is simple to resolve. The problem is that the format of the voicemail access number that the T-Mobile UK network pushes down to the handset is incompatible with the HTC software on the Touch Cruise (and maybe other devices too). The thing the software doesn't like is the "+" at the beginning.
To fix it go to the Settings/Personal/Phone application and click the second tab ("Services"). Now select "Voice Mail and Text Messages" and click "Get Settings...". You should now see a screen with two access numbers populated, one for voicemail and the other for text messages. Both will probably start with "+44". The text message access number is OK so don't mess with that but the voicemail access number won't work with the UK network. Simply replace the "+" with "00" and click OK and then your voicemail should work as you expect.
I haven't tried accessing voicemail outside the UK so it is possible that the above might break your access when roaming and you might need to edit back the "+" when travelling. I'd be interested in knowing if anyone has any experience with non-UK access and a "0044..." setting rather than the default "+44...", does it dial the UK access number OK?
(Actually, I never looked at the mechanics of accessing voicemail outside the UK, does it still dial the UK number or does the host network automatically push an alternate local access number to your phone when you register with the network?)
- Julian

Nice on Julian. I bought an Orbit 2 on O2, but my number doesn't transfer to O2 for few days yet, so have been using my T-Mobile SIM, and also experiencing this problem.
Thanks for sharing the tip!

I'm on UK T-Mob Web&Walk. Switched the +44 entry to 0044...but my TC then coundn't send texts. Switched it back and fortunately can still access voicemail as well as send texts. Strange.

I'm with T-mobile running an old T-mobile sim card on my new TC, when first called voice mail it gave me a long introduction then said "turn of your mobile off and on again to not get this messages again", I turned TC to "air plain mode" back to on mode and everything was cool from there on.
It seems that not everyone have that problem OR T-mobile has sort out that problem after Julian told them about the problem. In any case, thanks Julian to share this with us.
PS (today after reading this post is the first time that I use voice mail with my new TC)

Similar problem on WM 6.5 Asus Crystal
I had exactly this problem with T-Mobile and WM 6.5.
T-Mobile technical support was excellent, ringing back on several occasions to ensure that the problem was fixed, even though my handset is not a supported model. Once I was put through to 2nd layer support they fixed it in seconds.
In a nutshell, if you text and voice service centre numbers begin with a +44......, change them to 0044......
This did not happen on my XDA Exec WM5.0, so appears to be a new thing in WM6.5?