Are there any people also annoyed like me by the large default fontsize ?
I was used to Tytn small font in email, now the smallest setting on Vox is normal, which is too large for me.
Any solution or registry change possible for this ?
yep yep yep
there is s CSS file for die Font Size of SMS and Email ...
\windows\read_style.0409.css
there can you change something ...
here a excemple --> Font Size 7px
Hi dacoon. Thanks for this hint. I was searching for this for long time. Is it possible to tune this way also list of messages in inbox? There is only 5, resp.4 messages per page and too big font for me.
Thanks
No, sorry ... for this i found nothing ...
The CSS file is from ROM and is write protected. How to rewrite / edit it?
djaxdjax said:
The CSS file is from ROM and is write protected. How to rewrite / edit it?
Click to expand...
Click to collapse
I used Total Commander.
You can also transfer the css via Active Sync to the PC. Then remove the write protection and edit the file. Then save it to a different folder and copy it back to the device. That worked fine for me.
Palo_ said:
I used Total Commander.
Click to expand...
Click to collapse
Ya, thx, thats works . Now I go to customize my e-mail client.
Before:
After:
Look into attached txt file, search for "font-size".
djaxdjax said:
Ya, thx, thats works . Now I go to customize my e-mail client.
Click to expand...
Click to collapse
How did you get Total Commander to let you do this? I've been trying and had no luck so far. I've copied the file to a different directory on the phone and the PC, but I'm not having any luck overwriting the original file.
This is on the Cavalier though, but it shouldn't be any different.
Any help would be appreciated
Hi, In Total Commander you can switch into 2 window mode. You can copy and overwrite the css files from one windows to another. Similar as on PC.
djaxdjax said:
Hi, In Total Commander you can switch into 2 window mode. You can copy and overwrite the css files from one windows to another. Similar as on PC.
Click to expand...
Click to collapse
Thanks, but I've tried that.
* I have the new CSS on my memory card.
* Have teh second window set to \Windows
* Select the new css file and go file-copy
* the "copy/move " window comes up and I hit OK
* conirmation window "overwrite: \windows\... with \storage card\..." and I hit "Overwrite"
* "Confirm" windows pops up saying "Cannot ccopy or move file!"
Is there anything I should have done first?
Do you have your Mail application switched off? Look at Task manager. Or turn Off/On phone and try it to copy again.
I've tried that, and still no go. So I need to make some security change?
baralong said:
I've tried that, and still no go. So I need to make some security change?
Click to expand...
Click to collapse
All sorted now, I just needed to app unlock my phone.
Thanks.
Has anyone tried playing with the HTML templates to change the look entirely?
nice
Hi everyone nice tip!!!! But I have 2 question:
if u please post all the read_style files in windows cause I edited everything and I have sone problems.
Second question:
I see the 7pt in sms and email inbox but when I write a sms the font remains bigger than 7 is it possible to change the font when I write a new sms too? Thanx!
pict
here itis the problem
This font hacks look great. Does anyone know how to shrink the fonts being used in the message list view and the folder lists? I find I can only see 4 message headers at a time on Wm6 / Q9.. Horrible use of space. Same with folders list, font is massive. I'm assuming it is one of the dozens of .css files in that windows directory.
@zipreddictive: ... edit the compose_style.(langcode).css ...
@tommytuna: ... it's impossible ... or you found a developer to write a new app for this
Hi - I edited the compose style and now the new message fonts look good to. Still can't figure out how to get the message list to tighten up. Argghh.. So useless with 4 messages at a time when you can easily get 6-7 with tightening up that screen.
Related
anyone know a good resource for ppc/pda fonts please.pref graffitti style
thanks
PPC uses exactly the same font format as desktop windows, so you can copy any font in your c:\windows\fonts folder to \windows (on the PPC) and it will work (after soft reset).
Also any sites with fonts for windows will do. (Sorry, don't know any myself)
cheers mate,i hadnt realised they were the same
thanks
some intresting fonts here if it helps anyone else cheers
http://www.graffitifonts.com/fonts.shtml
jaceuk said:
some intresting fonts here if it helps anyone else cheers
http://www.graffitifonts.com/fonts.shtml
Click to expand...
Click to collapse
Thanks for that link - I use the Tempus Sans itc font myself on my device and it works well as a graffiti font.
Hitting error!
Happy new year everyone.
I just started to use Dopod 838 Pro about 3 weeks ago, and I have this problem :
1.) I like to use this font - Times New Roman, and when I tried to copy ALL the four TTF files (TIMES / TIMESI / TIMESBD / TIMESBI) from my notebook /Windows/Fonts folder to PDA's /Windows/Fonts, I hit error when come to Sync process :
Cannot copy 'TIMESI.TTF'. Make sure your mobile device has sufficient memory, that the file is not set as read-only, and that you have permission to copy this file type.
Why am I hitting this error (for ALL the four TTF files)? However, I'm still able to use the fonts (normal / italic / bold / bold+italic). Is there anyway to get rid of this error? Is there any step I have missed out for copying true type fonts from computer to PDA? Anyone out there care to help? Thank you very much in advance.
Stupid question but did you actually check the size?
On systems with many locales or Asian fonts one TTF file can reach 2MB.
It is possible that you are running out of storage memory.
Also, if the files already exist on your device you would not be able to copy over them.
I've already checked on the font size when the errors were prompted (as follow) :
TIMES - 399K
TIMESBD - 389K
TIMESBI - 234K
TIMESI - 242K
I've copied all those four files into \Windows\Fonts, and I'm able to use the fonts in the program, ie. to change it in Excel files. I have more than enough space in my device : Storage Free (25.05 MB) & Program Free (average 25MB most of the time). But I just don't understand this error was hit!?
Before I copied the TTF files into my device, I'm very sure there was no such fonts pre-loaded, so it couldn't be duplication issue.
I'm really scratching my head these days to find out the solution!
eDee said:
I've already checked on the font size when the errors were prompted (as follow) :
TIMES - 399K
TIMESBD - 389K
TIMESBI - 234K
TIMESI - 242K
I've copied all those four files into \Windows\Fonts, and I'm able to use the fonts in the program, ie. to change it in Excel files. I have more than enough space in my device : Storage Free (25.05 MB) & Program Free (average 25MB most of the time). But I just don't understand this error was hit!?
Before I copied the TTF files into my device, I'm very sure there was no such fonts pre-loaded, so it couldn't be duplication issue.
I'm really scratching my head these days to find out the solution!
Click to expand...
Click to collapse
It may be activesync thats kicking up the error - copy the fonts directly to storage card via a card reader or wm5torage and copy fonts to windows\fonts using total commander or gsfinder file explorers.
This is probabley another stupid question but once you've added new fonts into a ppc where do you change the default font??
I'm using a tytn and can't find anywhere other than a spb diary setting.
spikey0321 said:
This is probabley another stupid question but once you've added new fonts into a ppc where do you change the default font??
I'm using a tytn and can't find anywhere other than a spb diary setting.
Click to expand...
Click to collapse
I didn't change the default font after I've copied to my device \Windows\fonts.
meschle said:
It may be activesync thats kicking up the error - copy the fonts directly to storage card via a card reader or wm5torage and copy fonts to windows\fonts using total commander or gsfinder file explorers.
Click to expand...
Click to collapse
I have just tried your method (deleted the fonts before I re-copied directly without using sync options), but still hitting the stupid error!!
I gave up! I just leave the error there, it shown 4 Unresolved Items. But I still managed to use the fonts when editing my files in the device. And no problem also for me to continue sync the rest.
Just hope there's a solution one fine day!
spikey0321 said:
This is probabley another stupid question but once you've added new fonts into a ppc where do you change the default font??
I'm using a tytn and can't find anywhere other than a spb diary setting.
Click to expand...
Click to collapse
There are numerous references to the tahoma font in the registry it would be a bit laborious to change all the references but possible using search in phm regedit look for tahoma. make sure you know what your doing and have a backup of your registry and device.
Or you could overwrite tahoma.ttf and the bold version with a font renamed to tahoma.ttf - i tried it in the past and it worked.
There is an app pocket tweak but it only changes some of the default fonts.
Thanks anyway, everyone!
Hope there is a solution one fine day, any other advice/guides would be very much appreciated.
eDee said:
I didn't change the default font after I've copied to my device \Windows\fonts.
I have just tried your method (deleted the fonts before I re-copied directly without using sync options), but still hitting the stupid error!!
I gave up! I just leave the error there, it shown 4 Unresolved Items. But I still managed to use the fonts when editing my files in the device. And no problem also for me to continue sync the rest.
Just hope there's a solution one fine day!
Click to expand...
Click to collapse
Sorry where did you delete the fonts from and did you manage to get the fonts onto the storage card? You cant overwrite or delete the fonts in the windows\fonts directory on the device whithout renaming i.e font.tt instead of font.ttf and resetting and then delete or add the new font. Hope that helps
meschle said:
Sorry where did you delete the fonts from and did you manage to get the fonts onto the storage card? You cant overwrite or delete the fonts in the windows\fonts directory on the device whithout renaming i.e font.tt instead of font.ttf and resetting and then delete or add the new font. Hope that helps
Click to expand...
Click to collapse
Well... I can't really remember how I deleted the fonts...
I did hit an error when trying to delete the fonts inside my PDA \Windows\Fonts, so what I did was CUT the four files from the \Windows\Fonts to \My Documents and deleted them from the \My Documents folder.
After removing the TTF files, I changed the Sync options to exclude FILES from being sync. Then I sent ALL the four files to my PDA directly via Bluebooth. At first I thought I could fool around with the ActiveSync, but after sending the files (via BT) which eventually stored into PDA's \My Documents folder as well, I CUT the files and pasted them into \Windows\Fonts. There wasn't any error before I resumed the FILES sync option, unfortunately... after I have revert the FILES sync option, the error re-occured again.
Nevertheless, as I've mentioned, I still able to use the TIMES fonts for my Excel files. I'm trying to browse through MSDN Library website ( http://msdn.microsoft.com/library/en-us/dnanchor/html/WinMobile_TechArticles.asp )to find out the solution.
Cheers.
How do I change the default browser in the homescreen link. Currently it is linked to Opera and I would like the flexibility to change at will.
PS googled for info but couldnt find any.
THANK YOU
you can set the browser you want in \Application Data\Manila\internetportal-??-??.xml
At least, that worked for me.
Rudi2cv said:
you can set the browser you want in \Application Data\Manila\internetportal-??-??.xml
At least, that worked for me.
Click to expand...
Click to collapse
Thanks. Will try that out. BTW do you know if possible to add items to the TF3D screen beside the Clock, Call History & Appointment?
I'm not much of a tweaker yet, I'm just learning.
I found this solution by accident.
But how shall I change the files there ?
Could you please send your new files ?
thanks
myrin
I have a dutch t-mobile mda vario IV, with stupid t-mobile logo's i'm trying to get rid off so my file won't help you.
I changed the file with total commander.
There's a line in the xml file that tells what browser to open. Change that to the exe file of explorer (think it was \windows\iexlore.exe). That should do the trick.
I cannot for the life of me figure out where the setting is to change the text on your tf3d tabs. Out of the box my AT&T Fuze says "email" for the touchflo email tab, I would like it to say "Email".
Sorry if this has been posted already but I searched.
killer2001 said:
I cannot for the life of me figure out where the setting is to change the text on your tf3d tabs. Out of the box my AT&T Fuze says "email" for the touchflo email tab, I would like it to say "Email".
Sorry if this has been posted already but I searched.
Click to expand...
Click to collapse
It can be done by editing the 26948339_manila file in windows... If you have no clue what you are doing I suggest you get over you OCD as messing with this file in the wrong way can mess up tf3d.
Detailed instructions on how to accomplish this would be most appreciated... I couldn't find the file in the windows folder in my File Explorer (im assuming its hidden). What programs do I need to install and what steps need to be taken in order to successfully edit this value?
Thanks.
rymonday said:
It can be done by editing the 26948339_manila file in windows... If you have no clue what you are doing I suggest you get over you OCD as messing with this file in the wrong way can mess up tf3d.
Click to expand...
Click to collapse
It can also be done by editing 090661f7_manila, which is where the names for all the tabs are defined. Find the line that says:
<trans-unit id="IDS_EMAILTITLE">
and edit the line under it to say:
<source>Email</source> [instead of <source>email</source>]
and then re-start TF3D. Like rymonday said, though, you can really screw stuff up if you mess up an edit in one of these files so do so at your own risk!
Would I edit the manila file on my PC with Notepad? Then replace it on my phone and change the properties with Total Commander or is there another way?
Anyone want to chime in on how to properly edit this file?
killer2001 said:
Anyone want to chime in on how to properly edit this file?
Click to expand...
Click to collapse
* Disable TouchFLO from Settings>Today>Items
* Use Total Commander (http://forum.xda-developers.com/showthread.php?p=2286376) and find the "090661f7_manila" file. Change the attributes (remove Read Only flag - have to tap twice to get rid of the "ghosted" checkmark). Click OK to save the file changes.
* Then edit the file as ITNV posted (again, with Total Commander)
Find the line that says:
<trans-unit id="IDS_EMAILTITLE">
and edit the line under it to say:
<source>Email</source> [instead of <source>email</source>]
and then re-start TF3D.
Click to expand...
Click to collapse
Worked perfectly for me.
Thx guys!
Perfect! Thank you everyone!
I didnt quite think that one through.... this symbol doesnt exist on my phone so I cant log in lol, is their a way to instal specia symboles?
[★] said:
I didnt quite think that one through.... this symbol doesnt exist on my phone so I cant log in lol, is their a way to instal specia symboles?
Click to expand...
Click to collapse
I don't know for sure, but I doubt it .That ★ is pretty special.
What you could do as a workaround:
1) keep the symbol somewhere convenient (e-mail, webpage or MS Office document stored on phone)
2) copy-paste it for each site you're trying to log in to.
3) tell Opera to save the username/password
Better than nothing, I guess...
meptik said:
I don't know for sure, but I doubt it .That ★ is pretty special.
What you could do as a workaround:
1) keep the symbol somewhere convenient (e-mail, webpage or MS Office document stored on phone)
2) copy-paste it for each site you're trying to log in to.
3) tell Opera to save the username/password
Better than nothing, I guess...
Click to expand...
Click to collapse
I'd do that, but it doesnt actually recognize, I get that rectangle thing instead of the star
[★] said:
I'd do that, but it doesnt actually recognize, I get that rectangle thing instead of the star
Click to expand...
Click to collapse
Only after pasting, or is the one you're trying to copy also being displayed like that?
If the original is also displayed as a rectangle, most likely the ★ is not present in any of the default fonts. You could try addin an extra font that contains the character somewhere on your HD2 and using font linking.
I have no idea where to look for a solution if the original ★ is displayed fine, but is just not pasted correctly though.
[★] said:
I'd do that, but it doesnt actually recognize, I get that rectangle thing instead of the star
Click to expand...
Click to collapse
install the webdings font to the device
MG
MysticGenius said:
install the webdings font to the device
MG
Click to expand...
Click to collapse
Ahh thanks MG, but do you know of anywhere were its pre cabbed? I did a search for webdings font for windows mobile, nothing came up and then I looked into installing fonts to Wm and I would rather not have to go through all this
[★] said:
Ahh thanks MG, but do you know of anywhere were its pre cabbed? I did a search for webdings font for windows mobile, nothing came up and then I looked into installing fonts to Wm and I would rather not have to go through all this
Click to expand...
Click to collapse
Just copy font from computer and past it to your windows mobile font folder. It is the same font.
vichet007 said:
Just copy font from computer and past it to your windows mobile font folder. It is the same font.
Click to expand...
Click to collapse
would you care to elaborate? it wouldnt let me copy it, and theres was nothing in the windows>font folder on my phone to start with
Just copy the file from the font folder in your computer to your device, and then move it to \Windows using Total Commander or Resco.
Another possible solution - try to log in using this as your username:
Code:
[★!]
Replace the exclamation mark (!) with a semicolon (;)
[★] said:
would you care to elaborate? it wouldnt let me copy it, and theres was nothing in the windows>font folder on my phone to start with
Click to expand...
Click to collapse
Download attached font below (you can get it from your computer) and past it to your Windows Mobile: Windows/Fonts using file explorer such as Resco explorer.
NSider said:
Just copy the file from the font folder in your computer to your device, and then move it to \Windows using Total Commander or Resco.
Another possible solution - try to log in using this as your username:
Code:
[★!]
Replace the exclamation mark (!) with a semicolon (;)
Click to expand...
Click to collapse
why what is that all about?
[★] said:
why what is that all about?
Click to expand...
Click to collapse
That's the HTML code for the star. I doubt that will work as it won't be decoded from HTML before the login process takes place.
Just one thing that comes to mind - when you copied and pasted it and got the rectangle in the login box, did you actually try to log in? I assume you did, but I only ask because it shouldn't matter whether you have the font or not - you just want the correct character. The font is only for visual purposes, but software will still read the character as exactly what it is, regardless of what it looks like.
thanks nsider, that did work but john now I think about I think I didnt bother trying to paste the square in, oh well, its sorted now ;D
I didint try it but maybe its the solution you are looking for.
1.Install finger keyboard and MyMobiler.
2. Connect your phone to your pc using active sync. My Mobilers should start and you can control your phone from your pc.
3. Open Finger Keyboard's config screen and at the shortcut tab chose one and rename it (lg for example).
4. Copy the star symbol from your pc into My Mobiler, in the value field of the shortcut.
5. Apply the changes to the finger keyboard, disconnect your phone and try using it.
Shortcuts in finger keyboard are activated by a long press of a button.
Let me know if it works.
lorin.bute said:
Let me know if it works.
Click to expand...
Click to collapse
But he's already fixed it???
[★] said:
oh well, its sorted now ;D
Click to expand...
Click to collapse
Oops
I must have skipped that post, hehehe!
Sorry.
lorin.bute said:
Oops
I must have skipped that post, hehehe!
Sorry.
Click to expand...
Click to collapse
thanks for the help anyway ^_^
vichet007 said:
Download attached font below (you can get it from your computer) and past it to your Windows Mobile: Windows/Fonts using file explorer such as Resco explorer.
Click to expand...
Click to collapse
when I transfer files to my device, does the symbols automatically appear in the default keyboard?
Is there a way to refresh the internet shortcut tabs so that they will show current web pages??? Also one of my pages didn't load all the way so my Internet Shortcut tab has a half loaded page on it...This is ridiculous!!!
Nevermind
I figured it out! Go to \Windows\Thumbnails and delete them all. Then reload your webpage once you have a 3G Connection... Plus it would help if I upgraded to Opera 10
babyface215 said:
I figured it out! Go to \Windows\Thumbnails and delete them all. Then reload your webpage once you have a 3G Connection... Plus it would help if I upgraded to Opera 10
Click to expand...
Click to collapse
Hi, it sounds like you have found a solution to your problem; however, I thought I would let you know that you can create your own images for the internedt tab thumbnails. Rather than have a mini-screenshot type thing that is currently there simply make an icon (in PhotoShop, Fireworks, Corel or whatever your preferred image editing app is).
To implement this, do as follows:
*Copy the PNG files from the Windows/Thumbnails directory to your PC.
*Open each in your image editing software.
*The current size is not really necessary and can make for a larger file size. Reduce the canvas down to 128x128 (this seems to produce a reasonable image without too much resolution loss).
*Create your icon/preferred thumbnail image.
*Save as PNG8 (with alpha transperancy if you want a transparent background). PNG8 will keep your filesize down.
*Remember when you save to keep the same filename. It should be a long string of numbers and letters.
*Copy your new files back to your device Windows/Thumbnails directory.
*Voila! New thumbnails, no mini screenshots.
The reason you want to keep your file sizes down is so that there is no lag time when you get to the internet tab. If you have large files, it takes a minute for the tab to load the thumbnails.
Perhaps you can answer this for me
Franwella said:
Hi, it sounds like you have found a solution to your problem; however, I thought I would let you know that you can create your own images for the internedt tab thumbnails. Rather than have a mini-screenshot type thing that is currently there simply make an icon (in PhotoShop, Fireworks, Corel or whatever your preferred image editing app is).
To implement this, do as follows:
*Copy the PNG files from the Windows/Thumbnails directory to your PC.
*Open each in your image editing software.
*The current size is not really necessary and can make for a larger file size. Reduce the canvas down to 128x128 (this seems to produce a reasonable image without too much resolution loss).
*Create your icon/preferred thumbnail image.
*Save as PNG8 (with alpha transperancy if you want a transparent background). PNG8 will keep your filesize down.
*Remember when you save to keep the same filename. It should be a long string of numbers and letters.
*Copy your new files back to your device Windows/Thumbnails directory.
*Voila! New thumbnails, no mini screenshots.
The reason you want to keep your file sizes down is so that there is no lag time when you get to the internet tab. If you have large files, it takes a minute for the tab to load the thumbnails.
Click to expand...
Click to collapse
Something happened when I deleted my cache files and my thumbnails. I tried placing several internet tabs back but they will not load. Netflix, CNN, ESPN..etc..etc... the only ones that show up in the internet tabs favorites are new pages/favorites that I have not added or been to before.
Having exactly the same problem. Looking for a fix.
Thanks.
Do either of you have the original PNG file names?
I am unsure whether Windows or Manila creates a random number for the file name when a new thumbnail is produced. I suspect this may be the case.
If the file names tend to be the same then I can send you some of mine to test.
I have attached an images of my thumbnails and file names. Perhaps this will help. I'm happy to share the files if it will be of assistance; however, I suspect that the file names may not be the same as yours.
Do you have any files in the folder:
device/thumbnails
If you do, and you are happy to send them to me (with the name of the site they link too), then I am more than happy to create some thumbnails for your and roll them all into an easy to install cab
Thanks,
Yes, I have files in the Windows\Thumbnails folder, but only the new once that I create.
When I recreate a quick link that was used in the past (CNN….) No Thumbnails is created in the Windows\Thumbnails folder.
I think this might be what you are looking for:
Update thumbnail images of shortcuts on the Sense 2.5 internet tab
If you want those images to change to the actual picture of the site when you open them, instead of the old picture of what the site looked like when you first opened it, change this registry key: HKLM/SOFTWARE/HTC/VisualBookmark/UpdateOnce to 0 instead of 1.
Pasted from <http://forum.xda-developers.com/showthread.php?t=641804>
Thanks,
Changed to "0" in the registry, SR, set PIE as default browser - No Go
I checked again, the moment I delete a Thumbnails related to a site, I can't assign again any image to that site (to replace the "globe" image).
Need help!!!
Rittberg said:
Thanks,
Changed to "0" in the registry, SR, set PIE as default browser - No Go
I checked again, the moment I delete a Thumbnails related to a site, I can't assign again any image to that site (to replace the "globe" image).
Click to expand...
Click to collapse
Hi all,
Has anybody found a fix or know how to sort it out?
Deleted my thumbnails and now can't change the icon from a globe.
Can anybody help please.
Many thanks.
Franwella said:
Do either of you have the original PNG file names?
I am unsure whether Windows or Manila creates a random number for the file name when a new thumbnail is produced. I suspect this may be the case.
If the file names tend to be the same then I can send you some of mine to test.
I have attached an images of my thumbnails and file names. Perhaps this will help. I'm happy to share the files if it will be of assistance; however, I suspect that the file names may not be the same as yours.
Do you have any files in the folder:
device/thumbnails
If you do, and you are happy to send them to me (with the name of the site they link too), then I am more than happy to create some thumbnails for your and roll them all into an easy to install cab
Click to expand...
Click to collapse
Hi Franwella
I send to you some my internet thumbnail ( diferent name with your) and reg file of Internet Push.
Please help me to make a icon for there thumbnail and make a cab if posible
Thank a lot
http://www.mediafire.com/?mmweynz2zaj#1
ilovepiaggio said:
Hi Franwella
I send to you some my internet thumbnail ( diferent name with your) and reg file of Internet Push.
Please help me to make a icon for there thumbnail and make a cab if posible
Thank a lot
http://www.mediafire.com/?mmweynz2zaj#1
Click to expand...
Click to collapse
Hi
Here you go, I have made the attached thumbnails for you (using your original filenames).
I have included an image showing the new thumbnails and associated filenames.
All you need to do is copy and paste the files into 'device/windows/thumbnail' folder using Resco, Total Commander or similar. Overwrite the files that are currently in the folder.
That's it! It's done!
Go have a look at our internet tab and you will find the new thumbnails are displayed.
Note: I have a copy of your original files as a backup.
Franwella said:
Hi
Here you go, I have made the attached thumbnails for you (using your original filenames).
I have included an image showing the new thumbnails and associated filenames.
All you need to do is copy and paste the files into 'device/windows/thumbnail' folder using Resco, Total Commander or similar. Overwrite the files that are currently in the folder.
That's it! It's done!
Go have a look at our internet tab and you will find the new thumbnails are displayed.
Note: I have a copy of your original files as a backup.
Click to expand...
Click to collapse
Thank a lot
Ok, I never had this problem until now and I've done this countless times. My custom Youtube shortcut reverts back to the default thumbnail when I click on it. The others shortcuts are fine. Something like this can drive me nuts kinda...Any ideas guys? Thanks.
Edit: The problem has affected all the shortcuts.
Globe be gone!!
Rutster said:
Hi all,
Has anybody found a fix or know how to sort it out?
Deleted my thumbnails and now can't change the icon from a globe.
Can anybody help please.
Many thanks.
Click to expand...
Click to collapse
I had the same problem - after deleting the thumbnails I couldn't get them back. New shortcuts to new URL's worked, but everything else just gave the globe.
The solution that worked for me was to delete vb.vol in \windows (I stumbled across this after reading the "Manual Backup Stuff - Manila/Sense Internet Tab Shortcuts" section of http //whirlpool.net.au/wiki/htc_hd2_backup )
Don't have a solution for auto-updating the thumbnails, though