Database Info

New WM6 ROM kitchen (from Ranju)

Hello Friends,
I have managed the new WM6 kitchen based on Ivan's new (17913.0.3.0) build. This is a clean vanilla kitchen, you can add your own flavor and the way you want it.
I've uploaded the kitchen to the following url and hope that you will like it.
http://www.siemens-bd.net/files/000000
Files have been splited into 10 parts (5MB each) because of my unstable internet connection here. Uploading a 50MB file for me is simply a nightmare! Please download all of them and unrar.
You will find two cmd files (1. BuildKitchen.cmd and 2. CreateROM.cmd) inside the ROM_DEV folder after the unrar.
Step-1: Run the BuildKitchen.cmd (first time only), it will dump the rom and prepare the kitchen for you.
[Additionally, you may use it to dump other WM6 rom and prepare the kitchen. In that case, decode the rom, copy (or overwrite) the nk.nba file to the ROM folder and run this cmd to build the kitchen.]
Step-2: Run the CreateROM.cmd to build the rom...as usual.
You will find a Ranju_OEM folder under the ROM_DEV folder. Some of the oem packages have been added if anyone is interested to use. Just copy your desired packages to the OEM folder and build the rom.
And finally, all credit goes to Ivan. Special thanx to Helmi, Midget, Bepe and Tuatara for their tools and support.
By the way, I've a limited bandwidth to this server, it will be great if someone mirror it somewhere.
Best regards,
Ranju

ranju said:
By the way, I've a limited bandwidth to this server, it will be great if someone mirror it somewhere.
Click to expand...
Click to collapse
Mirrored:
http://vidmes.com/Uni/Kitchens/ranju/ROM_DEV.rar
(btw My mirror has a Bandwidth limit of 3Tb per month...)

TehPenguin said:
Mirrored:
http://vidmes.com/Uni/Kitchens/ranju/ROM_DEV.rar
(btw My mirror has a Bandwidth limit of 3Tb per month...)
Click to expand...
Click to collapse
Hi TehPenguin, thank you very much.

Thanks to ranju and thanks to tehpenguin!

ranju said:
I have managed the new WM6 kitchen based on Ivan's new (17913.0.3.0) build. This is a clean vanilla kitchen, you can add your own flavor and the way you want it.
Click to expand...
Click to collapse
Thx for the new kitchen. Based on V3, correct?
Could you please clarify the 1st post?
Clean Vanilla: What did you remove from the ROM?
Cheers

Download
Extract
BuildKitchen
CreateRom
BuildOS stops on error: the file 'temp\dump\Thumbs.db' already exists

I've just checked the OEM folder.
Very good Job: just like i was thinking. Probably I don't need any other apps for OEM.
THX!!!

tailazoom said:
Download
Extract
BuildKitchen
CreateRom
BuildOS stops on error: the file 'temp\dump\Thumbs.db' already exists
Click to expand...
Click to collapse
Did you modify any cmd file?
If not, then delete the temp folder. Do a search on SYS & OEM for "Thumbs.db" and delete them if found any. Run the CreateROM.cmd.
I suppose "Thumbs.db" have been created by your picture browser apps.

"Thumbs.db" is a file that Windows XP (and Vista) create if you preview a picture or movie. Its not important at all (although Windows will complain that it is a "System File")
(Nifty fact: Windows XP can create the "thumbs.db" file in a read-only network share!)

Thanks for the info, i'll try deleting and recompile.
Deleted, compiled and flashed: every essential function i tested is working. The kitchen is very clean! Many thanks ranju!

Little update of the kitchen
This is a little update of the kitchen:
* Due to the slow response of the phone, dialing/ending tone have been removed
* Update for HTC Task Manager 1.5 (Exclusive apps can be added now)
Please download the zip and copy/replace to the associated folder.
Update: HTC Task Manager cab attached.
http://forum.xda-developers.com/attachment.php?attachmentid=40327&d=1180503183

ranju said:
This is a little update of the kitchen:
* Due to the slow response of the phone, dialing/ending tone have been removed
* Update for HTC Task Manager 1.5 (Exclusive apps can be added now)
Please download the zip and copy/replace to the associated folder.
Click to expand...
Click to collapse
Can you please make a cab of it so that we can install. Dont want to go through re in stalling rom. Appreciate
Or if you can advice the registry entries for both above issues please.

Phone.cab
A cab file for the file in phone.zip is not that difficult since it's just a couple of registry entries.
The other one is more difficult since it also includes files.
So just to help a little, a cab file for the registry stuff in the phone.zip

Actually not that difficult
When comparing the old and new files, I noticed that just the RGU file is different.
Since this is the file with registry settings, I made a quick cab for it.
So not to replace the previous HTC Manager install or anything like that, just to corrent the registry entries.
ps. This and the previous file are not made/reviewed/anything by Ranju, but I've just given them him (her?) name to avoid confusion.

aniel1 said:
Can you please make a cab of it so that we can install. Dont want to go through re in stalling rom. Appreciate
Or if you can advice the registry entries for both above issues please.
Click to expand...
Click to collapse
[HKEY_CURRENT_USER\ControlPanel\Sounds\Dialing]
"Sound"="dpadctl.mid"
"Script"="p"
"Category"="InCallFeedback"
[HKEY_CURRENT_USER\ControlPanel\Sounds\Ending]
"Sound"="dpadctl.mid"
"Script"="p"
"Category"="InCallFeedback"
[HKEY_CURRENT_USER\ControlPanel\Sounds\DialPadCtlKey]
"Sound"="dpadctl.mid"
"Script"="p"
"Category"="InCallFeedback"
Remove the line in bold above ("Sound"="dpadctl.mid") in the registry and it should like this:
[HKEY_CURRENT_USER\ControlPanel\Sounds\Dialing]
"Script"="p"
"Category"="InCallFeedback"
Set the value of "Script" to "apr" and it should like this. It will remove 3s ring delay.
[HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
"Script"="apr"
Press the power button (off) after the changes and wait for 10 sec, switch on again and soft reset your device to take the changes in action...

GerardNL said:
When comparing the old and new files, I noticed that just the RGU file is different.
Since this is the file with registry settings, I made a quick cab for it.
So not to replace the previous HTC Manager install or anything like that, just to corrent the registry entries.
ps. This and the previous file are not made/reviewed/anything by Ranju, but I've just given them him (her?) name to avoid confusion.
Click to expand...
Click to collapse
I tried but looks like the cab does not stick the enteries in the registry.Can you give me the registry entries so that i can try to insert them manually. thank you

ranju said:
[HKEY_CURRENT_USER\ControlPanel\Sounds\Dialing]
"Sound"="dpadctl.mid"
"Script"="p"
"Category"="InCallFeedback"
[HKEY_CURRENT_USER\ControlPanel\Sounds\Ending]
"Sound"="dpadctl.mid"
"Script"="p"
"Category"="InCallFeedback"
[HKEY_CURRENT_USER\ControlPanel\Sounds\DialPadCtlKey]
"Sound"="dpadctl.mid"
"Script"="p"
"Category"="InCallFeedback"
Remove the line in bold above ("Sound"="dpadctl.mid") in the registry and it should like this:
[HKEY_CURRENT_USER\ControlPanel\Sounds\Dialing]
"Script"="p"
"Category"="InCallFeedback"
Set the value of "Script" to "apr" and it should like this. It will remove 3s ring delay.
[HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
"Script"="apr"
Press the power button (off) after the changes and wait for 10 sec, switch on again and soft reset your device to take the changes in action...
Click to expand...
Click to collapse
thank you ranju. CAn you provide the registry entry for tak manager too, somehow the cab posted above doesnot stick in the registry and i still dont see exclusive/activate please

Third day of use (calls with bt headset/sms/excel) without any problem. Thanks again ranju!

ranju said:
.....
Remove the line in bold above ("Sound"="dpadctl.mid") in the registry and it should like this:
....
Click to expand...
Click to collapse
Mmmm. Removing items from the registry.... Didn't think about that one. So that means that the 2 cabinet files I made will not work.
Back to the drawingboard...

Build my first Rom
I've this ROM kitchen few days back from one of my friends and was simply amazed when I build my first rom.
This is as easy!
Thanks ranju, keep up good work!

[20931 SYS/ XIP Ported]Improved PackageTools and BuildOS now for Wizard [29/11/2008]

I have been using many kitchens over the past year. Cooking horrible roms, decent ones and now a pretty good one. My problem was always the various tools lying all over my hard drive. Luckily I came across this litte gem by Ervius
Package Tools and BuildOS rolled into one. I also noticed that it handles rgu files much better than the previous BuildOS, it choked on an incorrect rgu file. Which in turn allowed me to get Video working in HTC Album 2
I have modified the batch files for our Wizards and have been cooking and im loving it
PackageTools+BuildOS (Latest combined version)
rgu-2-xml : Convert .rgu to provxml files
SYSVersion : Generates a version list of your SYS Folder
All the usual build tools :G'Reloc, M'Reloc, ImgFS Tools
AllPackagesToOne - Protect your rom from being ripped apart and the whole world being able to share in your utter cooking brilliance, via a tickbox ofcourse
Automatic Find and Fix duplicate file errors during BuildOS process
More features which I am either too lazy to list or dont use at all
Just add SYS,ROM and OEM folders. It also have a nice feature which allows you to select OEM Packages and save it as a preconfigured rom. Extra OEM packages can be placed in a Packages folder. BuildOS will load those files also (No more OEM's all over your hard drive).
BuildOS also runs G'Reloc during the dump process, but for good measure I also included it in the batch file.
Also added -conservative to the Imgfs Tools portion of the script to protect against overcook
BuildOS generates pretty log files which shows where stuff went wrong
Extract the zip file. Run Kitchen.exe and watch the magic at work.
Note
For some reason the output window text is black on a black background, but at the top is a nice running status. If not sure just hilight the output window.
If you start up and It complains about folders just create them
Download
Ported 20931 SYS/XIP without PIE 6 download
Microsoft Visual C++ 2008 Redistributable Package (x86) is need to be installed in your PC
[URL="http://www.microsoft.com/downloads/details.aspx?FamilyID=9b2da534-3e03-4391-8a4d-074b9f2bc1bf&DisplayLang=en]Get it here[/URL]

Hi,
Nice kitchen.
But its little bit difficult compare to hypecore.
Thanks for great kitchen.

Nice release ..i think im gonna start cooking too

Does it also have my favourite tool "Alpackagestoone" to remove and merge DSM and RGU files from Rom?

Noonski said:
Does it also have my favourite tool "Alpackagestoone" to remove and merge DSM and RGU files from Rom?
Click to expand...
Click to collapse
It does, in the prettiest little tick box you have ever seen, just below the Output Window. One of the really cool features of this version of BuildOS is the ability to scan for and fix duplicate files

sounds really impressive! downloading...
I'll recook my rom with it and let you know how it went

where should I extract this kitchen?
Error: pkgdll is missing
Never mind. copied it to the same folder as the kitchen.exe

I cant cook... .net problems
Many problems with the kitchens... why I cant install .net frameworks more than 2.0 that i have why... cause It said on every reinstalation missing file the installer will be quit! GOD DAmn... I think I need to reformat my PC and almost backup 40 GB info or... does anybody has an utiliti that erase all of anay program that stucks on uninstall or repair or install? i need to kill those .Net frameworks.

+ Que PPC said:
Many problems with the kitchens... why I cant install .net frameworks more than 2.0 that i have why... cause It said on every reinstalation missing file the installer will be quit! GOD DAmn... I think I need to reformat my PC and almost backup 40 GB info or... does anybody has an utiliti that erase all of anay program that stucks on uninstall or repair or install? i need to kill those .Net frameworks.
Click to expand...
Click to collapse
What OS are you running on your pc ? .net 2.0 and higher really like XP Sp2. Do a google search for CCleaner and "Uninstall Utility" this might help before you format dude.

Errors I am facing:
can not find \ROM folder
Windows can not open this file: OS.NB.Payload
Windows can not open this file: OS.NB.extra
BuildOS: Error, can not find ROM Folder!!!
Where are these files supposed to go? can you provide a tree map?
Can you also tell me what exe opens what file?
I'm almost having to pour cold water over my self
The main issue is not knowing where the ROM folder is supposed to go.
Also, not being able to see what the thing is doing (black on black) is really frustrating me also.
When you get a chance, let me (us) know how to use this cooker. it looks like it can do a lot more than I'm used to... but at the moment I am finding it useless.

S.V.I said:
Errors I am facing:
can not find \ROM folder
Windows can not open this file: OS.NB.Payload
Windows can not open this file: OS.NB.extra
BuildOS: Error, can not find ROM Folder!!!
Where are these files supposed to go? can you provide a tree map?
Can you also tell me what exe opens what file?
I'm almost having to pour cold water over my self
The main issue is not knowing where the ROM folder is supposed to go.
Also, not being able to see what the thing is doing (black on black) is really frustrating me also.
When you get a chance, let me (us) know how to use this cooker. it looks like it can do a lot more than I'm used to... but at the moment I am finding it useless.
Click to expand...
Click to collapse
I really wish I could decompile and just fix the black on black issue. Coz it is a simple case of just changing the font. Unfortunatly it is not written in .net like the previous BuildOS, so no luck there
This should be your default layout:
Base Folder-
->Compile Tools (OS.nd encoding tools)
->Flash (Created by Batch file, your new OS.nd ends up here)
->OEM (I like to put the BASE OEM Folders in here OEMAPPS etc)
->Packages (This is where I drop my custom OEM folders)
->ROM (OS.nb XIP,romhdr.bin lives here)
->SYS (Yeah well we know this one)
The error you are getting is when you try and extract a rom with Package Tools in the kitchen. Here is the procedure:
Create a base folder, I normally use Base_Buildnumber_Device
Select your Dump Type in the bottom check boxes, either a folder where you have already dumped a rom or an *.nb,*.nbf type file
Start your kitchen and select Open on the Package Tools tab.
Browse to the folder you have just created select the folder of rom file based on the above selection
Package tools will now extract the rom and create OEM and SYS Folders if possible
In case of cooking which I believe you are after:
Create the above folder structure with all files in place
Select BuildOS tab
Click Load Rom
Edit OEM's etc and just press Go

thank god u placed this tut, i thought i was the only one with theis prob oO
I'm almost having to pour cold water over my self
Click to expand...
Click to collapse
you were "almost" but i already did several times, what more do you expect if your working on Core,Improved Pakagetools, Molski Devpack,tnt kitchen and Porting :S

ather90 said:
thank god u placed this tut, i thought i was the only one with theis prob oO
you were "almost" but i already did several times, what more do you expect if your working on Core,Improved Pakagetools, Molski Devpack,tnt kitchen and Porting :S
Click to expand...
Click to collapse
Dude I battled to get the whole thing running as the tut's where for Kaiser and the tools were abandoned by the looks of it. But once i started using the cool right click and import package features I was sold.

Sorry. double post.

->ROM (OS.nb XIP,romhdr.bin lives here)
That may be what I am missing. how do I extract that?
I Have OS.nb; XIP.bin XIPfolder

@S.V.I Here is the romhdr.bin : http://forum.xda-developers.com/attachment.php?attachmentid=131286&d=1227164342
@cornelha i think u need a break lol you attached te file in the siff thread

->ROM (OS.nb XIP,romhdr.bin lives here)
Click to expand...
Click to collapse
should the XIP be in the bin extension or in a folder the one which Hyper Core Generates) ?

ather90 said:
@S.V.I Here is the romhdr.bin : http://forum.xda-developers.com/attachment.php?attachmentid=131286&d=1227164342
@cornelha i think u need a break lol you attached te file in the siff thread
Click to expand...
Click to collapse
OMFG dude I think you are right. Dev by day ... cook by night ... hey wtf is my gf ?!?!?

how to use this kitchen??
i run Kitchen.exe from desktop, but error(installation error)
any help me??

fachry said:
how to use this kitchen??
i run Kitchen.exe from desktop, but error(installation error)
any help me??
Click to expand...
Click to collapse
Yeah I realised now that when I zipped up the Kitchen I left pkgcommon.dll in the Tools folder, this should be copied to the same folder as Kitchen.exe.
Your error however comes from me not stating the .net Framework 2.0 or highers is required. I take these for granted since I have Visual Studio installed on my machine anyway

WM6.1 Professional Hybrid ported from Wizard

Hello all. I'm ported Wizard Slim ROM to Tornado.
Works very good, booting this system take 20-30sec. Comm Manager button is OK/Close, like in Kamikadze!.
Not all working at this moment. Not working is:
- unable to assign keys to programs using Buttons applet. You need edit registry to assign keys, (i fixed this)
- WMP is closing after playing 1 file,
- after run FakeCursor with long home press, error screen will show. What is this shortcut?
EDIT: - is not possible to write letters using hardware buttons. You must use screen keyboard. (fixed, big thanks for NitroGenious)
Download link: http://rapidshare.com/files/173403916/Slim_for_Tornado.rar (with RUU)
Kitchen: http://rapidshare.com/files/173401673/Slim_kitchen.rar
New version based on 20931 build from Wizard, including Manila 2D!
Link: http://rapidshare.com/files/176388771/RUU.rar (with RUU) (WiFi fixed, thanks @Qazer for information)
Kitchen: will be later
Free storage memory: ~16.50MB
Free program memory: ~21MB
Instructions for kitchen:
1. Run BuildOS.cmd . When BuildOS window appears, click Play button, then exit.
2. Wait a while.
3. After cmd window disappears, go to RUU folder and flash your Tornado.
This is WWE version, but i'm working on PLK version.
Screens in attachment.
Greetings for all, MietasSR
EDIT: I'm ported Artemis PLK ROM (WM6) to Tornado. I upload this later.

Gooooddddd I will test the rom
please tell us where you found the kitchen and if you have a manual to run the kitchen??
upload the kitchen and the page where you download, pleasee
thanks

I'm not downloading kitchen for Slim ROM. I'm dumped it (with XIP) and segregate packages in this using PKGTool. Next i'm replaced XIP with this from Kamikadze!.
Kitchen will be later.
BTW: ROM have 2MB more storage than Kamikadze!.

Thanks
for Tormado??

Yes of course for Tornado. But i'm working to port other Wizard ROM, this is bad.

MietasSR said:
Yes of course for Tornado. But i'm working to port other Wizard ROM, this is bad.
Click to expand...
Click to collapse
could you post you kitchen plz
thank you

Rapidshare said:
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.
Click to expand...
Click to collapse
Can you reupload the ROM or release the kitchen, please?

Ok, i'm try to upload this again. But proably i not have this on HD.. I'm sorry...

OK i'm ported again Slim ROM, link to download in first post. With RUU.
Sorry for double post.

Very glad to ahve another PPC ROM for imate SP5, wish it is to be improved very soon.

Do not know how to improve the bug with a keyboard. Any hints?

Did you try using the keyboard driver from Kamikadze's ROMs?

Yes, i'm using this driver.

But you have not installed an input method, such as eT9. Try this...

Thanks, i'm cooking ROM with this actually.
EDIT: Oh yes! It works! Thanks a lot!

At your service!
Looking forward to your kitchen being released!

I'm uploaded kitchen yesterday. Please test!
EDIT: My ROM after little customization in attachment.
Calibri font is very cool for HTC Home!
EDIT2: I downloaded 20931 ROM for Wizard, and trying to port this for Tornado.

Love that Customization Miesta!
When will you release the new ROM ? will it be in English?

Thank you for releasing your kitchen, but I have this problem:
Code:
C:\Slim_kitchen>tools\ImgfsFromNb.exe OS.nb imgfs.bin
ImgfsFromNb 2.0 RC 2
Searching for IMGFS start...
No IMGFS signature found. Exiting.
Imgfs.bin is not created!
Any ideas?
EDIT: I used "typho5.exe -t -v -x nk.nbf" to extract the OS.nb from your latest released ROM. The kitchen seems to work now, but I have not tested the created ROM yet...

Hmm... Proably i'm forget to add some lines to BuildOS.cmd ... I'm sorry... If builded ROM not works, i fix the kitchen and upload again.

Uni ROM Kitchen v2.0 by Tomal: Next generation Kitchen for Universal

Guy's,
This is my 2nd attempt to build a useful kitchen for Uni lovers. It uses a new set of tools and technology and you can customize/cook the rom exactly the way you like it. Porting or building XIP was a real pain but the kitchen builds the XIP and IMGFS together and importantly without manual intervention.
I believe this is the easiest kitchen ever built for Uni and you'll simply enjoy it.
The OS has been included in the kitchen is a fresh new Core - CE OS 5.2.21014.
OK, let's go for working part -
Unrar the kitchen in any of the drive in your PC (but must be in root) and it should look like - D:\TML_UNI_KITCHEN.
You'll find a command script "build_rom.cmd" under the TML_UNI_KITCHEN directory. Now, make a coffee, then just hit on this script and reluxe. Your ROM will be cooked within couple of minutes. Well, a little dialog box will pop-up at the asking what to do, select Encode to encode the rom and then exit.
You can follow the encoding steps like:
>>Encode>>Browse>>open nk.prj>>Encode>OK>>OK>>Exit.
Now, got to RELEASE directory, open ROMUpgradeUt.exe and flash the ROM to your device.
Advance part -
You can modify few parameters under the build_rom.cmd to make your custom rom.
set BUILD_TYPE=Regular
This is the type of your ROM to be cooked. The value "Regular" has an association with the directory \TML_UNI_KITCHEN\EXT\Regular. Put all the packages here, those you want to include in Regular build.
set BUILD_TYPE=Vanila
The value "Vanila" has an association with the directory \TML_UNI_KITCHEN\EXT\Vanila. Put all the packages here, those you want to include only in Vanila build.
PLease note, packages under the Regular directory will not be included in Vanila build and vise versa. There is also a Common directory inside the \TML_UNI_KITCHEN\EXT. You can put the packages here, those you want to include in Regular and Vanila both the builds.
set BUILD_NO=21014
This is the build number of the rom. The value "21014" has an association with the directory \TML_UNI_KITCHEN\21014. Actually you can put any value you want but whatever value you put must be associated with the same directory. Importantly SYS and XIP must be located under this BUILD_NO directory, i.e. \TML_UNI_KITCHEN\21014\SYS, \TML_UNI_KITCHEN\21014\XIP.
ROM template located under the \TML_UNI_KITCHEN\ROM directory.
OEM drivers located under the \TML_UNI_KITCHEN\OEM directory.
ROM will be transfered to \TML_UNI_KITCHEN\RELEASE directory after the successful build.
Directory Structure:
\TML_UNI_KITCHEN\21014
\TML_UNI_KITCHEN\21014\SYS
\TML_UNI_KITCHEN\21014\XIP
\TML_UNI_KITCHEN\21014\romhdr.bin
\TML_UNI_KITCHEN\EXT
\TML_UNI_KITCHEN\EXT\Common
\TML_UNI_KITCHEN\EXT\Regular
\TML_UNI_KITCHEN\EXT\Vanila
\TML_UNI_KITCHEN\OEM
\TML_UNI_KITCHEN\RELEASE
\TML_UNI_KITCHEN\ROM
\TML_UNI_KITCHEN\ROM\nk.nba
\TML_UNI_KITCHEN\TOOLS
\TML_UNI_KITCHEN\build_rom.cmd
Please note the kitchen is still in beta so you may notice some unwanted thing which I haven't noticed earlier. Also, the XIP inject part has not been finished yet. But it's not a big deal and not necessary for the current build.
You can easily inject it using Bepe's Xiptool if you want. Just pick the xip.bin from "temp" directory after the build, rename it to xip_out.bin and write to nk.nba.
There is also some other secret thing which I forgot to mention and love to forget.
Acknowledgment:
Major credit goes to Bepe as it was not possible to built this kitchen without his great tools.
Uni Kitchen v2.0 (beta):
http://vidmes.com/xda/Uni/ROMs/Tomal/TML_UNI_Kitchen_2.0_Beta.rar
http://vidmes.com/xda/Uni/ROMs/Tomal/TML_UNI_Kitchen_OEM.rar
Cheers!!!

Gr8 news Tomal.
Thx 4 you hard work.

Good job!Thanks!

Hm, i tried to start kitchen, but unfortunately getting error:
Code:
PLATFORMREBUILDER Copyright (c) 2008-2009 bepe Jan 4
Build: Regular
Locale: 0409
Preparing release structure...
... done!
Collecting standard packages and initializing hives...
XIP: 3 packages
IMG: 71 packages
Error: 0x8000000a
'initflashfiles.dat' does not exist in the specified paths!
ERROR! (errorlevel: 1)
Press any key to EXIT

I get the same initflashfiles error. It occurs in this command line:
.\tools\platformrebuilder.exe
in .\tools\buildOS.cmd

Same error here.. :/ If there is a fix it looks pretty good! Well done, Tomal

opppppsss...my mistake!
I forgot to include the OEM pack. Don't worry, I'll upload it asap.
Update:
OEM part has been uploaded (in 1st post). Extract it under \TML_UNI_KITCHEN directory.
regards

tomal said:
[...]
There is also some other secret thing which I forgot to mention and love to forget. [...]
Click to expand...
Click to collapse
LOL how nasty
gonna try and study it...
thx a lot for your work! hope my little donation was appreciated more than simple words

Wonderful!!!! Thank You
And with VInit help we can add flashdisk until he gets a way to make combined storage work for G4.

this could be the start of something new for uni lovers, many tnx tomal

Thanks a lot Tomal!
Hopefully on my vacations I can get into it!
Cheers,

Great work, Tomal I have just one question. I started build_rom.cmd and after some time a window pop-uped asking for HTC64 EXT rom... and there were 3 options : Encode, Decode and Exit. Afraid of doing something wrong I clicked Exit. Can you give some instructions how to continue the process and if there are any additional settings to make.
Thanks in advance .

simeonfilipov said:
Great work, Tomal I have just one question. I started build_rom.cmd and after some time a window pop-uped asking for HTC64 EXT rom... and there were 3 options : Encode, Decode and Exit. Afraid of doing something wrong I clicked Exit. Can you give some instructions how to continue the process and if there are any additional settings to make.
Thanks in advance .
Click to expand...
Click to collapse
Select Encode>>browse (to open the project file)>>open nk.prj>>Encode>OK>>OK>>Exit.
Cheers

Thank you! I just flashed with the Vanila ROM and it seems to be very good - it's fast, after soft reset there is ~28 mb free RAM. Again - thanks for your hard work .

it's possible to do a multilanguage/region kitchen? almost for common applications and configuration applets.
thx.

tomal said:
Please note the kitchen is still in beta so you may notice some unwanted thing which I haven't noticed earlier. Also, the XIP inject part has not been finished yet. But it's not a big deal and not necessary for the current build.
You can easily inject it using Bepe's Xiptool if you want. Just pick the xip.bin from "temp" directory after the build, rename it to xip_out.bin and write to nk.nba.
There is also some other secret thing which I forgot to mention and love to forget.
Click to expand...
Click to collapse
I tested it, and its working fine 100%, 1000 thanks Tomal for the great work!!!! I also used the optimize tool from HyperCore kitchen and the final nb.nbf is only 44M, but what about the XIP is it in my new rom or is it not and if not how do I inject it? I tried the implantxip tool from the TOOLS directory but I seam to not getting it how it works. Please help!!!

With the OEM directory in place, this kitchen produces great ROM's!
Thanks Tomal!

Thanks Tomal !
May i know how to use your kitchen to dump other ROM ?
Very appreciated your reply !!!
Thanks & Regards,

Upload This ROM
Can you guys help in uploading a ROM produced by this kitchen new Core - CE OS 5.2.21014
I would like to try it out.
Appricated ...

Vanilla nk.nbf
Here you are Fast and stable :]

[TUT] [UTIL] Remote Porting XIP [V.1.0][22/12/2010]

Hi All
I Create small tool for simply cooking ROM. This Tool Remote, and rebuild Kernel (XIP) in any Kitchen ROM Automat.
Info:
Ultra Std Edition - Remote XIP Porting Tool
Product Version: 1.0.0.0
Product Name: Remote Porting XIP
Copyright © 2010 By Nokser
All Rights Reserved.
[TUT][HOW TO] Instruction Manual:
Directory Position + Remote Porting XIP:
-> Extract file Remote_Porting_XIP_v.1.0 to yours kitchen.
-> Now you see: one apps (Remote_Porting_XIP.exe), and one folder (Porting_Kernel).
-> In folder "Porting_Kernel" - you have a two subfolders:
- New_XIP - in this copy a xip.bin, from another device
- Old_XIP - in this copy a xip.bin, from yours device
, and apps supported:
- AutoExecAndClick.exe
- Mreloc.exe
- XIPAddrTools.exe
- XIPPort.exe
Remote Porting XIP in work:
First - copy xip.bin file, from another device to New_XIP
Next - copy xip.bin file, from yours device to Old_XIP
Now You Run Remote_Porting_XIP.exe, and:
-> Click button "Dump XIP's" - this method extract files xip.bin, from New_XIP, and Old_XIP
-> Next Click Button "Sorting Modules and Files" - this method sorting all files/modules automatical, to new directory "Gen_XIP"
-> If you Click "XIPAddrTools" - this option is optional, but if you see any red lines in this program, then you must correct address.
* Support Video: Remote Porting XIP+XIPAddrTools Video Tut.
-> Button "Build New Kernel" - this method create a New XIP/Kernel for yours device. Build new xip in folder "Gen_XIP".
-> In folder "Gen_XIP", you see new file "xip_out.bin", this is a new functional kernel, u must only insert this file to OS.NB, and flash to Device if in the way not see any problems/bugs.
More Info:
This Tool, do not copy LangDB packages to Gen_XIP (new kernel)- or from Old_XIP, or a New_XIP.
I test this program in My kitchen. Build functional XIP for Samsung I600, and Toshiba TG01.
Not responsible, for not using the proper tools.
Everything you do on your own risk.
File in Attach. Have Fun!!!

great mate, ill test it

i never success to porting with mreloc, but i'll try to porting with tour tool..
thank you..

Hi Bro
You test this, and tell me what is results

Nokser said:
-> If you Click "XIPAddrTools" - this option is optional, but if you see any red lines in this program, then you must correct address.
Click to expand...
Click to collapse
i dont understand how to do this part. can someone explain this step to me in detail?

Aitrus said:
i dont understand how to do this part. can someone explain this step to me in detail?
Click to expand...
Click to collapse
This is a only optional function, because next step reloc file/module, but if you see in this program (in 3 tab) red lines, thn u must correct address
Example:
if select imgfs, have u address 03EFE000, and red line in up, then correct addr to 03EFF000, and next..

Nokser said:
Example:
if select imgfs, have u address 03EFE000, and red line in up, then correct addr to 03EFF000, and next..
Click to expand...
Click to collapse
how do i find this out. im a noob i start cooking last week.
Nokser said:
-> If you Click "XIPAddrTools" - this option is optional, but if you see any red lines in this program, then you must correct address.
Click to expand...
Click to collapse
when i say i dont know how to use this tool, i mean what buttons do i press?
SEL Work Folder... what folder do i open with this one?
SEL Ref. Folder... this one i open the Old_XIP OUT folder right?
and then how do i make the red lines go away if there is any?
if i skip "Optional Step ---> XIPAddrTools" then flash my rom. my rom wont boot.
if you could explain the XIPAddrTools part in a step by step guide for me that would be great, or maybe make a short video.

Very good works my friend ;-)
(Mangasora have do similar program too. ... What Is differents?)
Many time in "SYS, XIP kernel thread" we can download folder can you add this option to rebuild xip.bin with folder msxipkernel, etc... ?
I'll test your tool and tell us if it's good, thanks a lot !

EVEALEX62 said:
Many time in "SYS, XIP kernel thread" we can download folder can you add this option to rebuild xip.bin with folder msxipkernel, etc... ?
Click to expand...
Click to collapse
Say what you mean?

hi
Great Nokser

YAHAHANUVOELEGANLC said:
Great Nokser
Click to expand...
Click to collapse
Hi Bro
You test this for any device?

Aitrus said:
when i say i dont know how to use this tool, i mean what buttons do i press?
SEL Work Folder... what folder do i open with this one?
SEL Ref. Folder... this one i open the Old_XIP OUT folder right?
and then how do i make the red lines go away if there is any?
if i skip "Optional Step ---> XIPAddrTools" then flash my rom. my rom wont boot.
if you could explain the XIPAddrTools part in a step by step guide for me that would be great, or maybe make a short video.
Click to expand...
Click to collapse
please someone help my understand how to work this step.
i try to do it but i cant make the red lines go away.
im trying to cook for my sgh-i607.

Aitrus said:
please someone help my understand how to work this step.
i try to do it but i cant make the red lines go away.
im trying to cook for my sgh-i607.
Click to expand...
Click to collapse
Here you go
Remote Porting XIP+XIPAddrTools Video Tut.

Nokser said:
Here you go
Remote Porting XIP+XIPAddrTools Video Tut.
Click to expand...
Click to collapse
thank you, i was using the tool wrong.
my rom now boots.

Nokser said:
Say what you mean?
Click to expand...
Click to collapse
Sorry I'm more busy ... Happy new year man !
I want to say many time I have folder "XIPKernel" etc ... but not the file "xip.bin"
and for your tool I must have this file no?
Other question :
Do you know what I must do to suppress the restriction with ffboy's kitchen ?
Because when I do a ROM with this kitchen, after when I dump my ROM I have a folder "Beta ...." ?
thanks a lot for your work

EVEALEX62 said:
Sorry I'm more busy ... Happy new year man !
I want to say many time I have folder "XIPKernel" etc ... but not the file "xip.bin"
and for your tool I must have this file no?
Other question :
Do you know what I must do to suppress the restriction with ffboy's kitchen ?
Because when I do a ROM with this kitchen, after when I dump my ROM I have a folder "Beta ...." ?
thanks a lot for your work
Click to expand...
Click to collapse
It does not matter to which the kitchen is a utility unpack.
What, where to copy - you're in the first post

Sorry but don't understand what you want to say ...
For me with "l3v5y-TG01-Kitchen-200330" this tools don't work : haven't got error message but my XIP isn't port ;-)
Thanks for your work man !

I port in this tool, all my kernel for TG01