Problem Downgrading from Jester 2.2 to orignal imate rom - JAMin, XDA Neo, S200 Software Upgrading

i have a problem downgrading from jester 2.2 rom to orignal imate rom. when downgrading the error message say get latest NBF files. can anyone help me!

mtabishniaz said:
i have a problem downgrading from jester 2.2 rom to orignal imate rom. when downgrading the error message say get latest NBF files. can anyone help me!
Click to expand...
Click to collapse
Go to the bootloader first and re flash the ROM.
BR..

Related

i have an image curraption of verzion touch pro2 cdma last update MR3 upgrade

i had bricked my touch pro2 verizon with a wrong gsm hspl tool and revived it with a riffbox installing a custom rom but when trying to get back to a stock rom or even when trying to make a hardreset my phone get into boot mode and blink with no image file for one second then back to the boot image again and stuck there. trying to flash a stock rom it freeze at 0% and then the error 226 flash write .
i though if i can get the ruu_signed.nbh for the last MR3 update i may get back the right image to the phone
i searched so long and found the right radio version which is 2.37wv and successfully flashed it to my mobile
can you please help me with nbh file? the exact rom name is
RUU_Rhodium_W_S2_VERIZON_WWE_4.01.605.15_RS_2.37.00WV_NV_VZW_2.08_0105_PRL58005_Ship.exe
and i can't get the nbh image out of that or may not have the right tools or instructions
waiting your help
UPDATE: i manged to get the nbh file but same error .. stuck at 0% then bring the flash write error 226
Just use winrar to extract the .nbh from the .exe. Just a note the stock .nbh includes the radio 2.37
yes i managed that but still can't flash the nbh file ... the same flash write error 226

Can't Downgrade from Gingerbread to Froyo Samsung GT-S5570

Hi,
I tried several times to downgrade my firmware Gingerbread to stock Froyo rom but the process end up with a black screen. What is the exact procedure to Downgrade?
My current firmware version is Gingerbread S5570XXKPJ and want to go back to stock firmware.. can anyone recommend me a froyo stock firmware. I tried a one pac installation firmware name S5570DDKC1 and did not workout.
Help me plz
Ive seen with several phones you're unable to downgrade from certain roms and are advised to keep your backups before you go to GB because the only way to go back from a GB rom to a froyo rom is to restore your backup.
byazid said:
Hi,
I tried several times to downgrade my firmware Gingerbread to stock Froyo rom but the process end up with a black screen. What is the exact procedure to Downgrade?
My current firmware version is Gingerbread S5570XXKPJ and want to go back to stock firmware.. can anyone recommend me a froyo stock firmware. I tried a one pac installation firmware name S5570DDKC1 and did not workout.
Help me plz
Click to expand...
Click to collapse
try like this: download S5570XXKB1, flash it in Odin...if it doesn't work you can try to use ClockWorkMod to format /system and then it should work...
Thanks a million for the reply guyz... i did figured out by my self.. Actually downgrade does not support flashing one package installer. It requires multiple files flash like, Modem,CSC, Code and all those flash components.
am now using froyo successfully
how did u do it I have the same issue
byazid said:
Thanks a million for the reply guyz... i did figured out by my self.. Actually downgrade does not support flashing one package installer. It requires multiple files flash like, Modem,CSC, Code and all those flash components.
am now using froyo successfully
Click to expand...
Click to collapse
plz give us the method u downgrade it

[Q] Can I flash any ROM with Goldcard

I've searched everywhere but I cannot get the answer to whether or not I can flash any ROM on a Windows Phone with a Goldcard. I recently installed a custom ROM using one. But that was just for downgrading the SPL. Later I installed a ROM from RUU.
I want to know if I can simply use any nbh file to flash a ROM?
ahmadmalik88 said:
I've searched everywhere but I cannot get the answer to whether or not I can flash any ROM on a Windows Phone with a Goldcard. I recently installed a custom ROM using one. But that was just for downgrading the SPL. Later I installed a ROM from RUU.
I want to know if I can simply use any nbh file to flash a ROM?
Click to expand...
Click to collapse
no you cant. The rom you used for downgrading is an Stock or signed rom NODO?! Thats the reason why it has downgraded your bootloader.
You must find for your device a device specific ROM, and you must have HSPL to flash custom ROMs.
Dinchy87 said:
no you cant. The rom you used for downgrading is an Stock or signed rom NODO?! Thats the reason why it has downgraded your bootloader.
You must find for your device a device specific ROM, and you must have HSPL to flash custom ROMs.
Click to expand...
Click to collapse
No, it was a stock ROM.
So basically the Gold card method is only for stock ROMs?
ahmadmalik88 said:
No, it was a stock ROM.
So basically the Gold card method is only for stock ROMs?
Click to expand...
Click to collapse
yes, goldcard is only for stock ROMs because the *.nbh files are signed and stock.

[Q] [A511] Update Problems /bootloader lock

Hi
I cant update my a511 to 4.1.2 it gives no error there is just the Android guy with the triangle (flashed stock recovery and did factory reset)
I think its because I cant relock my bootloader it says please flash offical system.img
regards chris
chris1005 said:
Hi
I cant update my a511 to 4.1.2 it gives no error there is just the Android guy with the triangle (flashed stock recovery and did factory reset)
I think its because I cant relock my bootloader it says please flash offical system.img
regards chris
Click to expand...
Click to collapse
Flashing the official ROM from Acer's website should solve the problem.
himmatsj said:
Flashing the official ROM from Acer's website should solve the problem.
Click to expand...
Click to collapse
I read that but i cant find a download link for the a511 there are only versions for the a510
can you pls send me a link if you have one ?
regards chris
I got my orginal system.img but....
I got my orginal system.img but it stucks at please wait and doesnt shows the error with the system.img
any suggestions ?
regards chris (;

Flashing Retail Br ROM via RSD Error - Help!

Hey guys.. i am trying to flash BR full rom using RSD lite 6.1.4. But whenever i start flashing i get this error on RSD " Failed flashing process 13/21 flash devtree "devtree signed" -> phone returned failed . Now my phone is stuck in fastboot. Please help. This is non rooted phone with unlocked bootloader.
Resolved. Damnn.. i overlook unlocked bootloader only. So i unlocked my bootloader and flashed the ROM without any problem.
I had problems after root my device, so I decide reflash it.
First, I reflash with stock SBF Brazilian SBF 7.7.1Q-144, and everything is OK.
Then, I tryed to flash with the new SBF Brazilian 9.8.2Q-8-XT925 and RSDLite 6.0 (tried 6.1.5 too) but resulting a failure.
The error is: Failed flashing process. Unknown fastboot command .(getvar)
What this mean?
Is anyone with this problem too?
What can I do?
Thanks
CesarRamina said:
I had problems after root my device, so I decide reflash it.
First, I reflash with stock SBF Brazilian SBF 7.7.1Q-144, and everything is OK.
Then, I tryed to flash with the new SBF Brazilian 9.8.2Q-8-XT925 and RSDLite 6.0 (tried 6.1.5 too) but resulting a failure.
The error is: Failed flashing process. Unknown fastboot command .(getvar)
What this mean?
Is anyone with this problem too?
What can I do?
Thanks
Click to expand...
Click to collapse
Please remove getvar line from the xml file and try flashing again. btw i didn't liked the BR retail version.. reason is the bloatware. The most clean rom is Fido canada. Only problem is that its just ICS. Hopefully we will see Fido jelly bean in feb.
Motorolalover said:
Please remove getvar line from the xml file and try flashing again. btw i didn't liked the BR retail version.. reason is the bloatware. The most clean rom is Fido canada. Only problem is that its just ICS. Hopefully we will see Fido jelly bean in feb.
Click to expand...
Click to collapse
OK. Done.
Thank You.
I simply disable unwanted apps.
I'm waiting for new epinters ROM CM10.1 to be stable to use it.

Categories

Resources