Hi, I'm sure the answer is somewhere out there but I've been looking for ages and I can't seem to find it.
I've just flashed my G4 Device with the Core 2.0 Rom and now my hardware keyboard doesn't work properly. When you try and do a symbol like the @ sign you actually have to use the next key across the get that symbol....i'm sure its just a language issue or something but I can't see what I have to do to put it right.....
Any help is greatly appricated.....
It's the keyboard layout that is not configured. You have installed and WWE rom but the keyboard layout is different.
Try this link (it's especially for German Layout)...but anyway read it all...
http://forum.xda-developers.com/showthread.php?t=290967&highlight=keyboard
...
Hope it helps. This method worked fine for me all the time. My keyb layout is german
This worked for my like a dream my keyboard is UK and 0809 code worked perfectly thank you.
someone know how fix the "," (COMMA) button?
i change to my keyboard language but when pressed show DOT
boto said:
someone know how fix the "," (COMMA) button?
i change to my keyboard language but when pressed show DOT
Click to expand...
Click to collapse
Boto
Resolved this problem? what's the solution?
Related
I have a german Kaiser so on the hardware keyboard it is laid out QWERTZ
However when I type the Z is still mapped to Y.
I know I found a fix for this before but after 20 minutes of searching I can not find it.
Any ideas?
I found it my self
in HKLM\local_Machine\devicemap\keydb
change Curlang to 407 or whatever your language code is
Thanks for all your suggestions
come on guys
somebody most know.
I tried the Herald fix from here
http://forum.xda-developers.com/showthread.php?t=366756&highlight=german
I tried the fix from WM5 from here
http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
It is not like I am a noobie who does not know how to search the forum!!!
German Keyboard layout
rob_pinnington said:
I have a german Kaiser so on the hardware keyboard it is laid out QWERTZ
However when I type the Z is still mapped to Y.
I know I found a fix for this before but after 20 minutes of searching I can not find it.
Any ideas?
I found it my self
in HKLM\local_Machine\devicemap\keydb
change Curlang to 407 or whatever your language code is
Thanks for all your suggestions
Click to expand...
Click to collapse
Alternatively, try this link here, that works for me quite well!
http://forum.xda-developers.com/showpost.php?p=1673274&postcount=2
I've recently installed Tomal 8.85 ROM and Radio ROM 1.18.
I have now some problems with keyboard.
I can insert into sms or text some symbols ot characters, especially that red one (usable with FN buttons).
Many thks for any help.
johnjohnmel
johnjohnmel said:
I've recently installed Tomal 8.85 ROM and Radio ROM 1.18.
I have now some problems with keyboard.
I can insert into sms or text some symbols ot characters, especially that red one (usable with FN buttons).
Many thks for any help.
johnjohnmel
Click to expand...
Click to collapse
Try finger keyboard is included on Tomal 8.81, and in his thread you can find the .cab
Hope it helped,
orb3000 said:
Try finger keyboard is included on Tomal 8.81, and in his thread you can find the .cab
Hope it helped,
Click to expand...
Click to collapse
I've just tried to set finger keyboard but without success, with Italian, English and Spanish characters set.
Straightforwardly i don't know the provenance of mine qtek 9000 and so maybe i don't know which language i have to choose for my keyboard.
For example i have a strange as like as "C" red character on "K" button and a strange as like as "S" on "L" button.
When i use red character usually i type a different character than it has written on mine keyboard.
You can see maybe something looking at this image (not more sharpen):
Bye
johnjohnmel
Advanced config?
Hello,
i don't know whether i understand your problem right, but have you tried to change the layout in start-->settings-->system-->advanced config-->input-->keyboard layout?
Hope it helps you.
Bye
330e said:
Hello,
i don't know whether i understand your problem right, but have you tried to change the layout in start-->settings-->system-->advanced config-->input-->keyboard layout?
Hope it helps you.
Bye
Click to expand...
Click to collapse
Thank you a lot, i've solved issue.
Bye
johnjohnmel
hello people
if got a little problem white my keyboard on my cruise
i did an update to wm 6.1 nld on the official htc site
everything works good but i think is much to slow
so i downloaded 3LIT3_VIII_Full_NLD and installed it
but now my keyboard doesnt work 100%
i can use the qwerty keyboard without problems
but when i want to use the xt9 keypad then i can only type numbers
character or alphabet doesnt work
can somebody give me an answer please
thank you greetz pet
Try this!
http://www.4shared.com/file/112390528/29099d60/BJK_HTC_EzInput_QVGA_NoKbd_0409-RC2.html
from this thread : http://forum.xda-developers.com/showthread.php?t=426281&highlight=BJK_HTC_Ez%2A
When you have numbers, than change to a other keyboard and write one or two words. after this, you change the keyboard again and it works.
If have the same problem with gullum Ez 1.5 keyboard. Now i have BJK Keyboard and german language pack and it works fine
XDANoob said:
Try this!
http://www.4shared.com/file/112390528/29099d60/BJK_HTC_EzInput_QVGA_NoKbd_0409-RC2.html
from this thread : http://forum.xda-developers.com/showthread.php?t=426281&highlight=BJK_HTC_Ez%2A
When you have numbers, than change to a other keyboard and write one or two words. after this, you change the keyboard again and it works.
If have the same problem with gullum Ez 1.5 keyboard. Now i have BJK Keyboard and german language pack and it works fine
Click to expand...
Click to collapse
Thank you problem solved
Dear Sir,
I know, it is a very common question BUT I have a problem with it. Since I had Qtek 9100 I do know about thing or two considering keyboard layout. But, again, Rafael seams to me a lot different than my ol' 9100.
First thing's first, I don't know witch keyboard layout is printed on keyboard. I am attaching an image of keyboard, and I am grateful for providing me this useful info.
Link:
Second, if someone can give me a short tutorial how to change layout I would be most grateful for that.
I do know how to change keyboard on qtek 9100, but it seams that this change is a bit more complicated, and I've spent about two days trying to change the keyboard.
Thank you
This is the sprint keyboard and u can change the layout with a program called TarusBullba Tilt keyboard fix. i had the same problem and that worked
I've installed keyboard fix, it isn't remapping them to fit properly. Numerical pad that is on the upper row of keyboard with TarasBulba fix is located on the right middle part of keyboard.
Is there a registry fix for remapping the keyboard?
Is the keyboard Swedish, Finnish or else?
Thank you
Mine is english and just works. U may also try some options in AdvancedConfig but i'm not sure if it will help.
Hello! Colemak typist here.
Can you change the layout of the keyboard? I don't mind about the physical layout, just the software mapping. I have no idea how he keyboard is handled so could someone kindly work out if this is possible? And if Colemak is available?
Thanks!
Nobody with a keyboard who can quickly check this out for me?
If you don't get a reply shout me tonight and ill give it a go.
hmmmm. cant see anything that allows keyboard remapping in the settings.... which is a shame as my @ and " are not as per the layout ... which is odd .....
Could always try button remapper beta off the market. I don't know if it will work on the dock keyboard but I could remap some of the keys using a usb keyboard on my viewsonic g tab. Something to try at least.
kiz said:
Hello! Colemak typist here.
Can you change the layout of the keyboard? I don't mind about the physical layout, just the software mapping. I have no idea how he keyboard is handled so could someone kindly work out if this is possible? And if Colemak is available?
Thanks!
Click to expand...
Click to collapse
One way to do it is go to this website to get a general idea about remapping. Then download the KeyTest.apk from the author.
When you start the app you can see which scancodes are created. Now go to /system/usr/keylayout (most likely requires root) and change the keyboard layout that is associated with your keyboard. If you don't know, download aLogCat from the market. When you connect a keyboard it will show up in the log. For special characters and shortcuts modify the appropriate keychar table in /system/usr/keychars.
Hope that helps. It worked on my XOOM for a generic BT keyboard that had lots of Apple keys.
Wonderful. Thankyou all for your helpful posts! Very glad to know there is a way to do this, even if it is not an official option.
Thanks again.
wilbur-force said:
hmmmm. cant see anything that allows keyboard remapping in the settings.... which is a shame as my @ and " are not as per the layout ... which is odd .....
Click to expand...
Click to collapse
You need to change the software keyboard to the ASUS one in order to get correct layout on dock keyboard.
As a follow up post - I got a transformer with dock. Downgraded to 8.2.3.9, rooted and found the keyboard layout in /usr/xt9/keylayout/qwerty-en_GB.kl. I edited by hand (thankfully it's a lovely human readable text file) and now am enjoying colemak! Woot!
I might write a little how-to so that anyone can do it quickly and easily.