Canadian Providers Settings!! - General Topics

Ok. I have a Rogers Sim in the Province of Ontario
I'm in Ottawa, but these setting work for all of Ontario. You may need a different voicemail phone number, but these are sometimes setup automatically. The number one agent had given me didn't work as well as the phone number I recorded from my phone before I flashed it. Either way, maybe everyone in Canada can provide their provider phone setting here, so we all have one central place to look, and don't have to wait for hours with different agents to get all the information. Please feel free to add your Province or city settings here and tell us which provider as well! Thanks.
Rogers - Ottawa, Ontario ---Works for the Province of Ontario (tested in Toronto, Ottawa, and all cities in between)
Call Forwarding +1 (416) 357-1041
Voicemail +1 (416) 357-3229
Text +1 (705) 796-9300
Voicemail: +14163581549 (alternate: +14163573229)
email 000 000 0000
Data
Rogers Internet
Cell GPRS
APN: internet.com
User: wapuser1
pw: wap
Domain: 208.200.067.150
smtp.rogerswirelessdata.com
Primary IP: 208.200.067.150
Primary Port: 9203
Secondary IP: 208.200.067.151
Secondary Port: 9201
APN: goam.com
Username: wapuser1
Password: wap
HomePage: http://mymobilehomepage.rogers.com/
GPRS dial *99#
Gateway 172.31.44.254
DNS 207.181.101.4
DNS 207.181.101.5
Rogers MMS
Cell GPRS
APN: media.com
User: media
pw: mda01
Domain: 172.025.000.107
GPRS setting on CHAP auth
* *Homepage: http://mms.gprs.rogers.com
* *Security - On
* *Bearer - GPRS
* *Connection Type - Permanent
* *Lock Status -Unlocked
* *Authentication Type - secure
* *login tupe - AUtomatic
* *Lock set v - YEs
* * * * *GPRS APN : blackberry.net
* * * * *WAP gateway IP: 208.200.67.15
* * * *WAP gateway port: 9201
Wireless Tech support 1-866-931-3282
That all the info I could get from the various agents! If you have more info or any corrections, please feel free to add.

This has been already done, if you go through this thread you find out that Canada's settings are already being collected and if you go to the second link you can follow Walshieau's config. loader to automatically load your settings via XML following a hard reset or after you flash. Your settings seam to be a little different then the rest of Rogers in Ontario, but doesn't matter whatever makes your phone work.
http://forum.xda-developers.com/showthread.php?t=299023
http://forum.xda-developers.com/showthread.php?t=303046

Glad to know that is already available. I uninstalled my settings and am trying your xml. I check it out and see if that works well for me. Thanks for the future help!!

sjetha said:
Glad to know that is already available. I uninstalled my settings and am trying your xml. I check it out and see if that works well for me. Thanks for the future help!!
Click to expand...
Click to collapse
Please let me know

Since I had manually created my GPRS/MMS settings, I used the tap to delete method. So it should have been back to a 'virgin' state. I then installed your xml file. MMS Rogers did not appear, although a Rogers Internet did appear.
Tried to send MMS message....failed.
Tried to connect to internet .....failed.
Gave your file one more chance doing a hard reset.
Only Rogers Internet appears again under manage existing connections.
Tried to send MMS message....sent...Successful.....will verify once home if it was received.
Tried to connect to the Internet....Sucessful....Great Job!!
Your xml file only works from a fresh hard reset phone....deleting, soft reseting do not work.
P.s. Is there a way to disable the GPRS from connecting as soon as I click on IE? I generally use wifi for EI and don't use GPRS unless 'stranded'

sjetha said:
P.s. Is there a way to disable the GPRS from connecting as soon as I click on IE? I generally use wifi for EI and don't use GPRS unless 'stranded'
Click to expand...
Click to collapse
If you are connected via WiFi it will not connect via GPRS, at least it doesn't for me. Glad it worked.

Related

Please help me setup my Internet and MMS settings

OK i have a 750v from the UK and i use it with the Vodafone contract i got it with. I unlocked it so i can use it back home here in Cyprus when im here for the holidays etc but for some reason i cant get internet or MMS to work. I had found the settings off the Cytamobile-Vodafone (my phone provider, Cytamobile is owned by Vodafone now) website but they dont work.
So i called them (a few times) and they said they cant help me and the only thing they can do is send me a document with the settings written so that i can put them myself... I tried to several times but still nothing! The weird thing is that if i keep my Vodafone UK internet settings it works but i'm not sure if im going to be paying loads extra or not with those settings. MMS dont work either way.
--------------------------------------------------------
This is the: "Basic settings for WAP over GPRS" that i was sent
Account Name: cytagprs
Profile Name: cytagprs
Connect using
or Bearer Type
or Data bearer
or Packet: GPRS
APN
or GPRS access point
or Access Point Name: cytamobile
User id
or User name
or Login name: user
Password: pass
IP address
or Gateway
or Primary Proxy Server
or Proxy address: 212.31.96.161
IP address Port: 9201
Proxy Server Port: 8080
------------------------------------------------------
And they also sent me these settings for MMS
Profile name : Cytamms
Data Bearer : GPRS
Access Point name : cytamobile
User name : user
Password : pass
Authentication : normal
Gate Way IP address : 212.031.096.161
Homepage : http://mmsc.cyta.com.cy
Connection security : off
----------------------------------------------------
The voda UK settings for Internet (the ones in "My ISP") are:
Access point name: internet
username : web
Password : web
Oh also when i change the APN from "cytamobile" which i was given, to the Vodafone UK APN which is "internet" but i keep the Cyta-Voda username and password, internet still works. Im really confused.
Can some knowledgeable expert help me figure this out? Thanks and sorry for the huge post!
Try to hard-reset first, make sure everything are clean up.
And then, repeat your setting at menu
1. Setting - Connections
2. Manage Existing Connection - Click "NEW" and follow step-by-step (dont forget chooce Mode as Cellular Line (GPRS, 3G).
3. done
I already did a hard reset a few times and entered the settings and all but still nothing...

Vox & MMS settings

I have problem with MMS settings.
MMSC Settings on my Vox
Name: MMS
MMSC URL: http://mmsc.tele2.hr
WAP gateway: 193.012.040.066
Port: 80
Connect via: Internet
Max. sending size: 300K
WAP version: WAP 2.0
When I press "Send/Receive" receive message (left top) "Error synchronising"
Look information on provider site: "PRESS Tele2 pretplatnici" http://www.tele2.hr/hrv/index.asp?p=upute&sp=rucne
"Pretplatnici" is postpaid system...
Help...
its not really showing the Port number.
try 8080.
also did you already configure your GPRS settings?
Elisha said:
its not really showing the Port number.
try 8080.
also did you already configure your GPRS settings?
Click to expand...
Click to collapse
Yes, I have correct GPRS settings and I use that.
Again error (with 8080) :-(
try to setup connection as secure wap and use some user id to log on.... It worked for me in slovak T-Mobile network... I get the same message also using proxy server and user id. Immediatelly I changed this to Secure WAP it strated to work properly... You should give a try.
evo ga
pozdrav,
I see you are using TELE2 network in Croatia. you have automatic settings for MMS in this files.
BlaBla for prepaid, and pretplatnici for postpaid.
it's intended for HTC touch but works also on VOX.
nadam se da ce ti ovo pomoci.

Touch Pro ROM on a little known network

I've been plying with ROMs on my ATT Fuze for a while and feel pretty good about it. My future sister-in-law just got her husband a Touch Pro but they use ACS (Alaska Comunication Services). Now when I load a ROM on my phone and when I put my SIM in for the first time it asks to setup the carrier and ATT is the first on the list so I never have worried about this step. What if ACS is not on the very short list of carriers, what will in need to know when I select other, what is it going to ask me?
Thanks.
*bump*
I am also on a smaller carrier.... Einstein Wireless (aka Einstein PCS)... May carrier also isn;t on the list.. text messaging and calling works.. but not internet or picture messaging ... Any suggestions?
P.S. Below is the list of settings I used on my Tilt to get them to work..
Under settings, coto Connections...
Name for connection : EinsteinPCS Internet
access poin name : apn (case sensitive)
Usename : (leave blank)
password: (leave blank)
domain : (leave blank)
...under advanced
User Servier assigned IP address
click ok..
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :192.168.254.251
click advanced
http: 192.168.254.251:8080
wap: 192.168.254.251:9201
secure wap: 192.168.254.251:9201
socks (blank)
For MMS... go into MMS Options... goto servers.. set these settings :
Server Name : Einstein Wireless MMS
Gateway : 192.168.254.251
Port # : 9201
Server Address : httP//www.einsteinmms.com\+1(your 10 digit # here)
Connect via : EinsteinPCS Internet
Seriously guys? Just phone the carrier and ask for the settings - they'll either tell you, or send them as a network message (or both). The auto-config just makes life easier the the majority of people, its not essential.

Internet Settings help please for "Einstein Wireless"

Hi Everyone...
A few days ago I got a really good deal on a AT&T Fuze... I have long had my AT&T branded Tilt/Kaiser and had no problems using it what-so-ever. After playing with it a few days, I have done everything to it from HardSPL to rom to radio..... I have decided on NRG 's Energy.RAPHAEL.21889.StandardM2.5_27.Jan.2010 rom. This rom works great, has the features that I wanted, and looks nice too . I got the full rom which has a network setup that seemed pretty inclusive, but to no suprise, did not have mine, "Einstein Wiress" in wisconsin. I have all the settings it took to make it work on my tilt along with the "instructions" I wrote myself to make it work...
I would really appreciate it if someone who already is using their Touch Pro from Einstein could share the settings, or what I am missing. If you have an idea, please feel free to share it. Here are the "instructions".
Name for connection : EinsteinPCS Internet
access poin name : apn (case sensitive)
Usename : (leave blank)
password: (leave blank)
domain : (leave blank)
...under advanced
Use Server assigned IP address
click ok..
under proxy settings check: "this network connects to the internet"
and "this network uses a proxy server to connect to the internet"
proxy server should be :192.168.254.251
click advanced
http: 192.168.254.251:8080
wap: 192.168.254.251:9201
secure wap: 192.168.254.251:9201
socks (blank)
For MMS... go into MMS Options... goto servers.. set these settings :
Server Name : Einstein Wireless MMS
Gateway : 192.168.254.251
Port # : 9201
Server Address : httP//www.einsteinmms.com\+1(your 10 digit # here)
Connect via : EinsteinPCS Internet
I hope this is enough.. Right now it now it show the "E" for Edge... (Einstein is a GPRS/Edge company, no 3G)// When I try to run a program ir "connects" and shows by the signal strength meter that I am connected... but every program gets nothing.. The weather, QuickGRPS, internet browsing, etc... All of these same programs are confirmed working with WiFi. I made sure everything is set to connect to the internet using "Einstein Wireless"... I have tried both transparent and non-transparent connections (I never had that option before) & I beleive I have tried all 3 of the the 9600 protocals in the advance settings... My tilt was set to chap (like AT&T)... If you have any questions feel free to ask...
Thank you in advance,
Teej
Ok Everyone!
After erasing all the internet settings again for the 5th time... I inputted everything in, made sure that 3G/UPSD options turned off, it seems to be working this time.. No idea what I did diffrent this time than all the others, but it works.. That is what matters... Thank you to all those who offered help via PM or in the forums...
Teej

HTC Touch Pro - Data connection

I have a HTC Touch Pro which I got from Three in Australia. I have the energy rom running on it and it has been sim unlocked. I have put in a Lebara sim from the UK and I can not get the data connection working.. no email or google maps
I have called Lebara and they have said they don't have setting for the HTC.I know Lebara is on the Vodafone network so I tried setting the data connection to Vodafone but it still didn't work. I may not have done it properly though.
If anyone knows a way around this it would be greatly appreciated. Cheers.
I would search the networking forum for the settings like apn and the likes for the network you want to use and then manually add them
try to find lebera settings from different phones and use that settin in the htc should work
Go to Start>Settings>Connections>Connections>New Connection(At the top)
And enter these settings.
Profile Name - Lebara WAP
Bearer - GPRS/3G Modem (This will be a drop down list, make sure you select modem + GPRS/3G)
IP Address - 212.183.137.012
APN - uk.lebara.mobi
User ID - wap
Password - wap
WAP 2.0 Port - 8799
WAP 1.x Port - 9201
Authentication - Normal
Secure Settings - Off"
You may not need all these settings, but I hope this helped ( I haven't tested this but it should work)
mat157 said:
Go to Start>Settings>Connections>Connections>New Connection(At the top)
And enter these settings.
Profile Name - Lebara WAP
Bearer - GPRS/3G Modem (This will be a drop down list, make sure you select modem + GPRS/3G)
IP Address - 212.183.137.012
APN - uk.lebara.mobi
User ID - wap
Password - wap
WAP 2.0 Port - 8799
WAP 1.x Port - 9201
Authentication - Normal
Secure Settings - Off"
You may not need all these settings, but I hope this helped ( I haven't tested this but it should work)
Click to expand...
Click to collapse
I have the same problem....but only im with page plus(under verizon) in the usa

Categories

Resources