Hi All,
Is there a way to extract the radio ROM from a working phone without modifying it?
I'm doing som testing of previous versions of radio roms and I'm curios to test a ROM from a specific phone in another one without modification.
Thanks,
Michael
maybe this will help
http://wiki.xda-developers.com/index.php?pagename=HimalayaHowtoCopyRom
Thank You, Just what I was looking for )
Thank You, Just what I was looking for )
Related
Hi there - I would love to change my originally rom but I don`t know if there is a ROM without faults which is at least like the original ROM ?
Compared to the original rom - which self-made rom has the same progs like the original rom ?
thanks a lot
myrin
damn dude.. just sift through each rom thread and read about them. you're not going to find the perfect rom for you unless you do that.
Well lets just say that if you are using the original ROM then theres your biggest fault right there!
You can always Hard SPL your phone and download all these great ROMS on here (Duttys, Shaps, ect ect) and if you don't like any of them you can always go back to using the original ROM. So it's basically a win win situation.
Just about any ROM on here works great on your Kaiser/Tilt. And just like with anything technical there will be some faults. But these custom ROMs on here are way better than your stock ROM.
But let me go ahead and tell you now...once you flash you'll never go back!!!!!!!
jb
jbmorales - sounds good - I did the ROM change already with my TYTN but could you pls help me where I find the best description how I must do it - I mean where it is simple and easy described so that I can do it without too much emphasis on it....thank you so much !
BTW - can I - after I reinstalled the ROM restore everything or do I have to install every single programm ?
Which ROM is similiar to the T-Mobile version but way better than it ?
THANKS !!!!!
MYRIN
Hey all ,
Ok sorry to make a new topic but we are stuck .
We can flash g1 roms on our magics with no prob at all but the only thing that does not work is wifi ???? we have now tried everything to get it working but we have hit a brick wall .
Now their must be someone who can look at this for us and tell us what to do or fix the prob for us explaining what they did . as said all g1 roms work on magics its just the wifi .
Any help would be fantastic .
you need to get the wifi modules from any magic rom and put them in the g1 rom
Thanks for your reply , we have tried that mate an it does not work ?
I think you should replace modules and kernel. You can't load modules form other kernel version, you should see this in dmsg. I don't know where kernel is placed but if you change kenel and modules everything should works fine. I'm not and expert in android ROM cooking but this is theory for linux based systems.
Many thanks for taking the time to reply and for your help mate thanks buddy
This is my second time playing with my phone and i hope this time i didnt brick it. I've just flashing my Xperia X10i from 2.1 eclair to Gingerbread 2.3.3. Flashing it using the Generic 3.xx download from this forum. And im glad i finally done it. Who cares... To the question.
1> What is ROM? Everybody talking about changing Rom, Stock Rom, this Rom, that Rom.. what is the meaning of ROM for android? Flashing Rom and Flashing Firmware is the same thing??
2> What is BASEBAND??
3> What is Generic Number?? Build number?? i've change flash my build number from 2.1.A.435 to 3.0.1.G.0.75 and my baseband version,kernel and Android version change along with it.
HELP ME PLEASE!!
kayzix said:
This is my second time playing with my phone and i hope this time i didnt brick it. I've just flashing my Xperia X10i from 2.1 eclair to Gingerbread 2.3.3. Flashing it using the Generic 3.xx download from this forum. And im glad i finally done it. Who cares... To the question.
1> What is ROM? Everybody talking about changing Rom, Stock Rom, this Rom, that Rom.. what is the meaning of ROM for android? Flashing Rom and Flashing Firmware is the same thing??
2> What is BASEBAND??
3> What is Generic Number?? Build number?? i've change flash my build number from 2.1.A.435 to 3.0.1.G.0.75 and my baseband version,kernel and Android version change along with it.
HELP ME PLEASE!!
Click to expand...
Click to collapse
1. A ROM is the firmware, or Operating Sytem, of your phone. It's a package that contains the OS, drivers, programs and other odds and clods that make your phone work!
2. A baseband is a special package (kind of like a ROM) that controls the radios in your phone (cellular radio [phone part], bluetooth, WiFi etc.)
3. A build number is the version of the Operating System you are installing. Every manufacturer uses different naming systems for their builds, but usually the higher the letters/numbers, the newer the build. A new build will often contain a new baseband, and a new kernel. If you're lucky, you can sometimes even get a new OS version (as you did)!
Hope this helps!
pudding no root?
ok guys/girls I have been looking on here for a week and a half now but I flashed pudding and im unlocked as well but no root access obviously something i am not doing right. I thought pudding would give root but maybe not? I also have tried booting in recov. but then I can't find anything in there that says root or whatever.
I have the superuser app. dosent work as well as tita. says not rooted? It also says that a newer version is released and that it was put on my sd card but can't find it?
Any help is welcome or just point me to the right thread.
No dummie responses as they are a waste of your intellectual ability when you could have just used that energy to respond with help.
Mahalo
Try neopeek.com
Sent from my TIADROID CWM BETA2 using Tapatalk
Many builds for different phones available at neopeek.com and tiad8.com. don't trust the retarded aaarg(troll) in this forum.
Sent from my FroyoB THUNDERBOLT V1 using Tapatalk
proč když chci psát do fora rom musím nejdrív napsat 10 príspevkú sem.?
Thank you very much. You're the best! God bless!
I ported cm11 4.4.2 ROM into 210k.everything works fine without data.when I change the libsec-ril.so start to work data.but can't send SMS.without change libsec-ril. So SMS work.but no data.I really appreciate if anybody can help me with this.
Thank you
comeon guys.nobody has a solution?
I know I don't have the knowledge to help you, but maybe providing more information might bring more people who can. A more detailed explanation of what you did, and how you did it can help people track what went wrong. for instance, what "change" did you make to the .so files?
TheMoro said:
I know I don't have the knowledge to help you, but maybe providing more information might bring more people who can. A more detailed explanation of what you did, and how you did it can help people track what went wrong. for instance, what "change" did you make to the .so files?
Click to expand...
Click to collapse
thanks themoro.i wanted to port 4.4.2 i9300 rom into shv-e210k.im no expert but i did it help with google.everything works fine but cannot connect to 3g data network.so i replaced the ril files from which is already i have 4.4 rom in my phone.(shv-e210k).i did one by one and found out libril-sec.so is the problem.so i just replaced libril-sec.so from my old 4.4 rom to new ported 4.4.2 rom.then data started to work.but cant send sms.without replaced ril file no data but sms working.i really hope somebody can help me.because it is very very difficult to find custom roms for our device.
rat99 said:
I ported cm11 4.4.2 ROM into 210k.everything works fine without data.when I change the libsec-ril.so start to work data.but can't send SMS.without change libsec-ril. So SMS work.but no data.I really appreciate if anybody can help me with this.
Thank you
Click to expand...
Click to collapse
can you share me this rom?
nam_nam9639 said:
can you share me this rom?
Click to expand...
Click to collapse
you mean you want the rom which i ported?it doesnt work properly
rat99 said:
you mean you want the rom which i ported?it doesnt work properly
Click to expand...
Click to collapse
oh. my E is bad ^^
i have patch i9300 android 4.3 cook for E210K. work very good. ( Not for CM and AOSP based rom )
this link : http://www.mediafire.com/download/dd22ztjcr7987v3/i9300-For-E210K-V1-TXN.zip
can you make for android 4.4 of i9300?
After updating to a new rom i mean flashing a custom rom JB to KK, the sensors malfunctioned and it is seen that reverting back to a previous rom fixed the issue. But can someone guide which type of files or sensir files i need to get from my previous stock JB and replace or add in KK so that the rom would work fine. Anybody who has experience in working with building roms can help out. Thanks in advance.:good:
Can you please post the Device and the Rom in question ? That will help me point you in the right direction.
It is not as easy as replacing Kitkat files with JellyBean files and hope to make it work.