hello this is my fisrt post.
i have a problem with my XDA.
when i upgrade my XDA, it's automatic goto to the bootloader screen. after that it wont out from bootloader after i soft reset or hard reset.............or my XDA dead i don't know.
plzzzzzzzzzz help me.
sorry about my english.
THX
did u complete flashing a new rom?
go to wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
http://wiki.xda-developers.com/inde...ose stuck on Boot Screen (UNI_exitbootloader)
isn't finished yet.suddenly connection error 101.
no rom in my xda after that,just bootloder screen
.thx guys.i hope this help me
just try flashing again!!
it should went even you are in the bootloader
max
------------------
bad english, i know
I once semi bricked my XDA (remembered from then on not to sync through the usb hub ), I found that whilst I couldn't flash with a ROM from on here, the official O2 ROM worked
Related
Hello, I have a Xda Neo with a english rom Dopod.
I found a italian rom by I-mate and when the update starts, the pda remain in boot mode and the computer tell me : error 326, invalid command.
My pda is locked in the boot mode! can you help me please?
Thanks
Hello,
i have the same problem as you had.
Did you managed to get your device to work again? How?
you can only up rom to equal or higher than 2.15.xxx .
I-mate is 2.13.xx (lower).
good luck!
Yep, thanks
I managed finally with a FRE ROM for S200 and it worked
Hiiiiiiiii,
i have the same problem as you had.
Did you managed to get your device to work again? How?
I tried different ROm but i still in boot loader screen
Please Help me
help me plzz
i have a same prob with xda mini s plzzz help me plz post link for download rom
Hi there,
I bought a Qtek S200 and I tried to do a ROM upgrade. I followed the instructions given in the website http://kimpeacocke.blogspot.com/2006/06/how-to-perform-rom-upgrade-on-your-i.html
I got the upgrade from this site at ftp://xda:[email protected]_022021_Dopod_PDAMobizEdition_v101.zip
I followed the procedure given in the website given above. After I upgraded successfully the phone has become locked in the boot loader screen. I have done both soft reset and hard reset. Nothing works. The phone gets locked in the boot loader screen. Need help.
Thanks,
Julian
Try to reflash with Qtek ROM instead...
Why you said that it's locked on the Bootloader screen?
Is it frozen or locked?
Hi Rayan,
I tried flashing with the Qtek ROM. I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there. Nothing else happens. I have sent the device back to the guy from whom I bought it.
I got the same problem as Julian - I tried to upgrade with the mentioned ROM and now my device are stucked at the boot screen :?
Some help here ? I'm in same situation
I have an O2 with Dopod rom, after I instaled some software I must to restart and then my O2 are stucked/frozen on Windows Mobile splash screen
Only if I remove the battery I can stop the pda.
I can't do nothing to make him to start. Some ideea ?
:shock:
Later Edit :
solved with http://forum.xda-developers.com/viewtopic.php?t=49298&sid=35f5c1e9e165997b4634ea0c7700ac76
Same issue here with a O2 Xda Neo with German Rom.
Applied the procedure of the prophet wiki : How to CID unlock and Upgrade your Prophet (SPL 2.09 & 2.15)
After step 6 and a soft rest it is stuck in bootloader and will not do anything else, not even off or hard reset...battey has to be removed in order to shut it off....
Any ideas?
Remind me to find the guy who wrote the wiki page on unlocking CID in Prophet......good job pal......
Aaaaarggghhhh %^*^%*^%*^%*
Problem solved..
Hi everyone,
Good news at last. I sent my Qtek S200 to the guy from whom I bought the phone. He fixed it and now I am a happy man. You can check with him if everything else fails. Email him at E gadget Depot ( [email protected]).
All the best..
i tried to upgrade my QTEK S200 with this RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip it got to 95% and then it gives me nbf file cannot work with your PDA. Please help.
I have this problem too, i know only one exit from this situation - i have flash my s200 with RUU_215737_2157135_023021_QTEK_s200_RUS ROM, now it work fine.
you find it her
bootloader issue
I have the same problem too, If anybody know method to fix this problem please help us.
I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there.
THX in advance for you help
Robert
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Please, the links to the solution does not exists anymore.
I need help!!
Qtek S200 stuck in tri-color screen, all flashing so far still does not make it work..
When doing a hard reset I get format failed.
/Jonas
I have same problem!
Anyone can help?
TJSM said:
I have same problem!
Anyone can help?
Click to expand...
Click to collapse
Go to HMA4's upgrade guide or my thread in my signature...
same problem
i have exactly same problem and i couldnt solve it too.So can someone help us?
Please someone explain completely what should we do.
i can not active sync and waiting on the bootloader screen
bacardilima said:
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Click to expand...
Click to collapse
daelee,
you can get normal state, follow the bolded attention at above quote.after entering the 3 colour screen connect USB and you can load the original WM5 ROM on your device. after that, upgrade to any wm6 by the rules and active sync.
the link is dead on that message..
i went to the that page and the link for solution is dead.
http://forum.xda-developers.com/showthread.php?t=376561
find out is there anything that can help!
Hi!I have a motorola defy and today i tried to install a ROM.I followed all the steps but now my phone it`s not starting.It`s stuck at Motorola logo.And if i plug it into my computer with USB it doesn`t recognize it because the phone is somehow off.I tried to enter te boot menu but it doesn`t appear to me...Coould you help me please(i am a starter so i don`t know all the things to do )
Try to flash another firmware or restore a CWM backup.
it's not bricked since it shows the boot logo, so you still have hope..
if this helped,,,, Hit the THANKS button !
OmarPlus said:
Try to flash another firmware or restore a CWM backup.
it's not bricked since it shows the boot logo, so you still have hope..
if this helped,,,, Hit the THANKS button !
Click to expand...
Click to collapse
oky i am a beginner so could you explain how to do that ?
hey bobolin,
before flashing try to replug your battery.
if this doesnt work you should try to flash your original firmware.
Look at ur phones sub-forum. there should be a tutorial.
Greetings
Find xda tutorials !
xda saved me many times from bricks!
carlodalatri?!!?
did you read my post before?
Greetings
Did you even backup ur phone ?
Owner of an awesome I9001 with broodROM RC5 and Skyhigh 1.4d kernel and XDA Premium
I don't know in motorola, so here's a link
http://www.freeyourandroid.com/guide/motorola-defy-flash-custom-roms-cyanogenmod
Owner of an awesome I9001 with broodROM RC5 and Skyhigh 1.4d kernel and XDA Premium
Hi xda commuity!
I have searched through your forum and have not found my answer... I am then asking for your help.
I have a Xperia T (LT30a 9.0.9.141 if I recall correctly) and it won't boot. Son logo appears, then vanishes.
I have tried flashing back the bootloader as well as the entire system, but I always get an error from flashtool.
I need your help folks.. Thanks in advance!
P.S. : The reason why my phone is stuck there is that it wasn't apparently rooted the good way..
Hello. First of all,I'm sorry for my English if it's not that good.
So,let's get started. I tried to install a mod,more exactly [MOD] PMB-NITRO X 4.0 on my Xperia S,i had installed it in recovery mode,but after installation the phone continue to restart. I see the Sony logo,and then it restarts again and again. And for my bad,I forgot to do a backup...
Any help? Thank you.
XperiaX7u said:
Hello. First of all,I'm sorry for my English if it's not that good.
So,let's get started. I tried to install a mod,more exactly [MOD] PMB-NITRO X 4.0 on my Xperia S,i had installed it in recovery mode,but after installation the phone continue to restart. I see the Sony logo,and then it restarts again and again. And for my bad,I forgot to do a backup...
Any help? Thank you.
Click to expand...
Click to collapse
what do u need exactly ... and see if i can help
Your device have forum on XDA. So, search THIS forum about Boot Loop or Soft Brick.
e.g: THREAD
Problem is solved!