I have an O2 Neo with AKU 2.2 Jesterz b1
I tried to enter the password for my gprs wap settings
3 digits....I wouldn't connect...I check the the settings
and the password went from 3 digits to 16 ??? re-set it
a few times and the same thing happend???
Any ideas on this one ?
skyeking69 said:
I have an O2 Neo with AKU 2.2 Jesterz b1
I tried to enter the password for my gprs wap settings
3 digits....I wouldn't connect...I check the the settings
and the password went from 3 digits to 16 ??? re-set it
a few times and the same thing happend???
Any ideas on this one ?
Click to expand...
Click to collapse
Do you mean you see 16 times the * on your screen?
Because some programms mask the password field with more characters than you've actually typed. The reason for this is so other people can't guess the password
is this the same issue as the popular "master lock reset" problem?
that's why i revert my Dopod to aku3.5,waiting for smart1's v3,hope he'll fix this issue...
dmc3 said:
is this the same issue as the popular "master lock reset" problem?
that's why i revert my Dopod to aku3.5,waiting for smart1's v3,hope he'll fix this issue...
Click to expand...
Click to collapse
Where can I find AKU 3.5 ???
Related
Hi, really need help.
I have a Qtek S110 and am using a o2 sim in it but cannot get the MMS to work. I have put in the web and wap and mms settings but message get stuck in outbox.???
Please need help
Same here, but smaller size does work for me. < 100k that is. No further solution yet.
Use the cab i have included below, it was install all settings as they shud be so that internet, mms and wap all work.
Definitely worked on my Jam - thanks!
Hi,
Mu setup has message sizes of samller than 100K but even then message 27 k just got stuck.
:lol:
Hi,
i have downloaded the cab and copied ot on to my Qtek s110 but no change.
please advice how it should be installed- a step by step or location would be appreciated.
regards
booman said:
Hi,
i have downloaded the cab and copied ot on to my Qtek s110 but no change.
please advice how it should be installed- a step by step or location would be appreciated.
regards
Click to expand...
Click to collapse
Open the file explorer on your PDA and double click on the file. It will self install and delete itself afterward. That's it.
S110 MMS stuck in outbox
Same problem is occurring with my phone. My S110 did manage to recieve an MMS but just tried to send one and it just got stuck in the outbox. The phone then froze when I tried to go back into messaging. Someone then sent me an MMS the next day and it would not download. Wonder if it is something to do with the MMS settings, ie under the connect to drop down menu. Mine seemeed to be on connect to ' my workplace' as default. Other peopl;e have had similar problems on other networks ( on a google search) and replies have stated that they should have an option in the drop down menu connect to 'orange MMS'. It seems that with O2 I only have the options internet, Wap, Secure WAP network, but nothing stating MMS or O2. Have the cab file installed and have an O2 MMSC server on the servers tab. Also heard that you should put an '/' on the end of the address on tthe server? does anyone have any input on these points as it would be very helpful if someone it works for can tell me how their phone is setup with regards to these particular aspects.
Many thanks in advance for help.
I called O2 Uk customer service technical assistance about this and the refused to help claiming that they "do not support this phone"! That's funny, considering that its sold on 02 contract by just about everyone!
Dos anyone think that maybe theyve done something to blovk this phone (Jam) because they have an 02 "MDA" version of it?
I have a T Mobile MDA (Wizard), unlocked on UK O2. I flashed to Faria Crossbow WM6 a while ago and everything is fine apart from getting MMS to work. I have manually input the network settings for WAP, MMS etc. but when sending error message states 'error synchronizing' and it stays in the outbox.
I downloaded the O2 operator settings cab file from the ftp site which always worked with WM5 but it doesn't add any settings in WM6.
Maybe unconnected but I used to have the G gprs icon before I flashed - haven't seen it since - any ideas?
what are your MMS settings that you're inputting?
MMS
Astraeu said:
what are your MMS settings that you're inputting?
Click to expand...
Click to collapse
I have the same problem too and Im on UK Vodafone...spoke to vodafone and checked all the settings and all ok.
May be something in the MMS Composer by Arcsoft!
Anyone else?
vonspurter said:
I have a T Mobile MDA (Wizard), unlocked on UK O2. I flashed to Faria Crossbow WM6 a while ago and everything is fine apart from getting MMS to work. I have manually input the network settings for WAP, MMS etc. but when sending error message states 'error synchronizing' and it stays in the outbox.
I downloaded the O2 operator settings cab file from the ftp site which always worked with WM5 but it doesn't add any settings in WM6.
Maybe unconnected but I used to have the G gprs icon before I flashed - haven't seen it since - any ideas?
Click to expand...
Click to collapse
have you tried manually entering both the GPRS and MMS settings from your carrier as opposed to a cab file?
I have the same problem with NBD 7.1 rom.
No problem with Core2.0
I'm using usual Vodafone MMS settings!
As writen above, do not rely on CABs (I had also a problem with one "MMS setting" CAB not doing it properly), do it manually...
I did it succesfully in XDA MOBILE 6 (making MMS connection in Setting > Connections > Connections and then setting its usage in Messaging).
It is more work, but it is safer.
Your operator certainly has some instructions (in my case I worked according to the instructions how to set it in WM5 on MDA III - they were still good for WM 6 on MDA Vario).
If you have problems in one specific ROM, post to that thread (maybe the coook screwed up/removed MMS).
Mirek
hey i seem to have a problem with my mda's mms
i set it up yesterday after updating to WM6 and it was fully functioning this morning up until about 5 oclock. then when i soft reset my phone it gives me an error saying :
Dialed: wap.voicestream.com cannot connect for an unknown reason. To check your connection settings and change if needed tap settings. If the problem continues reset your mobile device according to your manufactures doc and try again
can anyone help me out on what to do?
i was having the same issue. I cheated and called cust service and had them resend the configuration back over. worked like a charm.
so all i have to do is call cust service and tell them to send me the MMS settings?
or u can just change wap.voicestream.com to internet2.voicestream.com or you can try internet3.voicestream.com all of these are valid but only internet2.voicestream.com works for me...but all are used by t-mobile...check em out
I'm on Faria's wm6 rom and in the MMS server tab i dont have a place for the APN to be punched in.
The fields i have to fill are
server name, gateway, port, server address, connect via, sending size and wap version. i have these to the t-mo spec but am wondering where i would try the internet2.voicestream.com method mentioned above.
----------- Found it
eboy44 said:
hey i seem to have a problem with my mda's mms
i set it up yesterday after updating to WM6 and it was fully functioning this morning up until about 5 oclock. then when i soft reset my phone it gives me an error saying :
Dialed: wap.voicestream.com cannot connect for an unknown reason. To check your connection settings and change if needed tap settings. If the problem continues reset your mobile device according to your manufactures doc and try again
can anyone help me out on what to do?
Click to expand...
Click to collapse
Change the name of your connection.
If you've accessed mms and internet, your settings are correct.
This has happened to my several times and this was the fix.
its still not working ive used...internet2, internet3, and also wap.voicestream
can someone please help me out!
did you change the name of your connection like stated above?
i finally got it to work last night and then i restarted my phone and then tried it this morning and it was back to not working
any help??
Any one knows how to configure the MMS settings for the WM6 firmwares?
I am unable to send / recieve MMS after "upgrading". Thanks.
JaLooNz said:
Any one knows how to configure the MMS settings for the WM6 firmwares?
I am unable to send / recieve MMS after "upgrading". Thanks.
Click to expand...
Click to collapse
the same proble whith my c600
but the 1° edition was good .works fine can nobody explane us a mistake?
thanks
Anyone knows how to hack the registry settings for M1?
http://www.miworld.com.sg/mms/mms_manu_setting_xphone.htm
I tried to change the address to the following, there is GPRS connection but wat's left is configuring the gateway correctly (which I do not know how to create a new entry in the registry).
i've two device
c600 whith Windows Mobile 6 for Tornado Perfect English Edition Released
c600 whith WM6 For Tornado - HTC Edition
but i can not configure those devices in mms and iternet .
I want ask if somebody had found a simply road to make a configuration.
in italy is not work . many people ask this cab or those info but ...
many thanks andrea
making a cab Document!
This is the application (HP iPAQ DataConnect) from HP iPAQ 514 that sets the Internet/WAP/MMS settings for ALL operators around the world.
http://rapidshare.com/files/65992342/HP_iPAQ_Data_Connect_by_NiTroGen.cab
It's tested on my Tornado and it works fine!
Unfortunately it must be installed in \Windows directory and it's about 300 files, occupying a total of 2MB! Just install it, run it, select your Country and Operator and uninstall it to regain these 2MB.
Warning! After the installation, my system became unstable and I had to reboot. If it will happen to you, do not remove the battery, just turn off and on the phone to flash the filesystem cache. This instability is normal because there are a lot of small files installed making the filesystem cache crazy!!!!
If you get a "SIM Error" with DataConnect then run MMISyncApp and rerun DataConnect! I don't know why this happens, but that's how it is solved.
Yes, I know this app is a little pain in the a$$, but it surely works!
question
Does this work for tmobile ? I have sda with wm6.
Or does anyone know settings for tmobile I can get internet OR email to work simultaeously using GPRS.Thanks!
gumbyandpokie999 said:
Does this work for tmobile ? I have sda with wm6.
Or does anyone know settings for tmobile I can get internet OR email to work simultaeously using GPRS.Thanks!
Click to expand...
Click to collapse
What data plan do you have with T-Mobile?
tzones
bipinsen said:
What data plan do you have with T-Mobile?
Click to expand...
Click to collapse
I am using the tzones $5.99 .It does work but I have to keep going into connects to and changing WAP to Internet and back and forth to get email OR internet.Weird huh?
jus tried it the mms still dont work, my txt work anyways...but not mms
iky10 said:
jus tried it the mms still dont work, my txt work anyways...but not mms
Click to expand...
Click to collapse
Under MMS settings
1. Make sure Port is 8080 (default 80)
2. Make sure WAP version is WAP 2.0 (default 1.2)
it jus changed the settings it says error synchronzing...