Related
Sorry if this is a real [email protected] question but I want to upgrade my (MDA Compact alike) Orange M500 but only the radio version is this possible? I can't seem to find a procedure on how to do this.
1. decompress the rom file(it's a exe) with Winrar.
2.U will find 3 nbf file.
3. remove 2 of them EXCEPT the radio).nbf
4. perform the update
Thank you for your response! already thought so but just wanted to be sure! thanks again!
AFAIK this is not possible.
The only optional part during an upgrade is the Extended ROM for a Himalya (dont know the effects for Magician).
If you only supply the radio nbf, you will end up with a non-functionin device.
@edsub: You're wrong in case of the Magician.
@rvbcrs: Do as jackleung said - it will work flawlessly, because I did this myself already.
Also, if you upgrade/downgrade radio only, it will not erase your "big-storage" ROM!!
jehlinger said:
Also, if you upgrade/downgrade radio only, it will not erase your "big-storage" ROM!!
Click to expand...
Click to collapse
thks for the tip, indeed the bigstorage ROM remains after radio 'only' upgrade.
Just upgraded to (Qtek) radio 1.12, although haven.t seen any differences with 1.11.
thks
what exactly is the radio used for?
reallly stoopid questions.. but
what exactly is this radio ROM used for?
is it as it's name suggest.. can i get radio fm/am from this?
Radio upgrade
Has anyone tried the 1.13 radio upgrade?
i upgraded last night, did a single radio upgrade with out upgrading the system rom.
Imp
25 minutes looking on the forums didn't really help me with what i need help with. i flashed Crossbow from a CID unlocked ex Faria aku 3.3 XDA Mini S, and i couldn't get signal, or play any sounds, in addition...the phone was extremely slow! i read that this is due to my device being CID unlocked, when i should flash an operator rom (to reCID lock it), then continue with the upgrade. surely this contradicts what threads say about phones MUST be CID unlocked otherwise you'll brick your phone etc. how can i get Crossbow Underground to be stable, and run normally?
also, my Faria 8mb aku 3.3 has moments of being lightning fast, and long periods of being stupidly slow (i.e. 10 seconds to unlock the phone from standby), does anybody know why it does this, and what i could do to fix it. Hard reset didn't do anything, and it's only getting slower. if i just left the phone after it being really slow, normally it will sort itself out and run fast again, after half an hour or so. the processor is set to default (not that this makes a difference as 260mhz doesn't speed it up), and i only have the normal programs on there.
any help atall will be greatly appreciated,
thanks,
thepolice
thepolice said:
25 minutes looking on the forums didn't really help me with what i need help with. i flashed Crossbow from a CID unlocked ex Faria aku 3.3 XDA Mini S, and i couldn't get signal, or play any sounds, in addition...the phone was extremely slow! i read that this is due to my device being CID unlocked, when i should flash an operator rom (to reCID lock it), then continue with the upgrade. surely this contradicts what threads say about phones MUST be CID unlocked otherwise you'll brick your phone etc. how can i get Crossbow Underground to be stable, and run normally?
Click to expand...
Click to collapse
I'm running Most Beautiful Edition so can't comment on Underground specific issues, but I don't think anyone has said that you should re-CID Lock your phone (actually I don't think you can, but thats another topic ). What I have suggested (and seen others suggest) is to always go back to an official ship ROM before upgrading. I went from Faria's AKU 3.3 straight to MBE and had all sorts of weird issues (active sync problems, Outlook complaining the calendar was corrupt, and more). I was frustrated and reflashed the TMobile 2.26 rom to go back to Faria's then it hit me I didn't do this before doing WM6. So I put MBE back on, and its worked great since. So I'm a firm believer now to take the extra time to move back to a shipped official ROM before loading a new custom one..
...the processor is set to default (not that this makes a difference as 260mhz doesn't speed it up)
Click to expand...
Click to collapse
Use batterystatus (for me I'm using .04.200 and not the beta 1.x one as it caused me issues) and have that overclock your device. If you can't see a difference, then I wonder if you have some hardware issue with your Wizard. I'm now running overclocked at 260Mhz via BatteryStatus and its been very stable and there is a definite improvement.
mfrazzz said:
I'm running Most Beautiful Edition so can't comment on Underground specific issues
Click to expand...
Click to collapse
Thanks, that was really useful
I can't run Most Beautiful, when i flashed it, it wouldn't boot atall. But this may be because i didn't flash the shipped rom before, is this likely?
When i flash the shipped rom, upon boot, the spl and ipl go back to 2.26...surely this means it's relocked. Should i flash the t-mobile rom instead? or wont this work as it wasn't the shipped rom - if that makes sense.
anyway, thanks so much for you help, you've explained a lot to me
thepolice said:
I can't run Most Beautiful, when i flashed it, it wouldn't boot atall. But this may be because i didn't flash the shipped rom before, is this likely?
Click to expand...
Click to collapse
Thats possible. can't say its likely, but its possible
When i flash the shipped rom, upon boot, the spl and ipl go back to 2.26...surely this means it's relocked. Should i flash the t-mobile rom instead? or wont this work as it wasn't the shipped rom - if that makes sense.
Click to expand...
Click to collapse
Yes when you flash the shipped rom the IPL/SPL will change to what comes with that ROM (for TMobile one it will be 2.26). That does NOT relock it. Only if you go back to a 1.x ROM will you have to deal with being relocked.
Example, I'm on a Cingular 8125. If I tried (out of the box) to flash the TMobile 2.26, it wouldn't work as its CID Locked. But after doing the CID Unlock, I can now flash TMobile, QTEK, O2, or whatever because it is CID Unlocked. And as long as I stay with 2.x roms, I can switch around as much as I want (it does't get relocked).
So definetly go back to an official shipped rom (and Tmobile 2.26 is the highly recommended one by about everyone), and then flash whichever custom rom you want to try. Its extra work to reflash an official rom but I think it removes problems some people see when they go from custom to custom.
thank you very much, i got my phone sorted now, and everything is clear to me.
It's okay now...got it sorted
Just curious, but what are you running now? And what worked for you?
mfrazzz said:
Just curious, but what are you running now? And what worked for you?
Click to expand...
Click to collapse
Right now i'm running the Faria 8mb. i was running Crossbow Underground, but i didn't see the point in going to all the efforts to fix the keyboard problems (because then I'd have to fix the predictive text) as the Faria Crossbow rom is coming out soon, i'll just get that...can't wait!
All the problems i had seemed to be becuase i wasn't flashing the shipped rom before the new one.
Does anybody has this Radio-Rom and could send me, or post ist?
care to explain where you got this version?
It's the German one I think.
i did notknow they had a german rom available with that radio version please post a link!
Rom version: 1.56.404.6
Rom date 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07W
Its the latest version, i think mine will have it when its delivered back from the repair center. Have some issues with the camera and the speaker thingy. Friend of mine has this radio version on his monday morning HTC TyTN (also had it repaired)
Bouloama said:
Rom version: 1.56.404.6
Rom date 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07W
Its the latest version, i think mine will have it when its delivered back from the repair center. Have some issues with the camera and the speaker thingy. Friend of mine has this radio version on his monday morning HTC TyTN (also had it repaired)
Click to expand...
Click to collapse
Could you post this version?
schroepfer said:
Could you post this version?
Click to expand...
Click to collapse
You can't dump the radio image from the device, it must be stripped from an operator released upgrade utility.
I have the Radio 1.27.12.32 on my phone. I bought it in Germany.
If there is a possibility to extract it, I will do...
I also have this radio ROM, got the TyTN II from expansys today.
Any possibility of getting this Radio? Would like to try it out.
Ok I quite the newbie so I hope you can bear with what might be a stupid question. First let me say that I love this site and all you guys are great. I use a Mac with OS X so there is no way I can run some of the tools recommended for ROM stuff.
I would however like to take my TyTN II from radio 1.27.12.11 to 1.27.12.17.
I downloaded from http://www.cinetsystems.com/ the KAIS_Radinly_1.27.12.17_CustomRUU.rar, and it expands into an RUU_signed.nbh and a CustomRUU.exe . All I have to do is run the .exe to flash the radio? It will not wipe out the data on my device? Do I need to copy both files to the TyTN II or is the .exe self contained?
micronauta said:
Ok I quite the newbie so I hope you can bear with what might be a stupid question. First let me say that I love this site and all you guys are great. I use a Mac with OS X so there is no way I can run some of the tools recommended for ROM stuff.
I would however like to take my TyTN II from radio 1.27.12.11 to 1.27.12.17.
I downloaded from http://www.cinetsystems.com/ the KAIS_Radinly_1.27.12.17_CustomRUU.rar, and it expands into an RUU_signed.nbh and a CustomRUU.exe . All I have to do is run the .exe to flash the radio? It will not wipe out the data on my device? Do I need to copy both files to the TyTN II or is the .exe self contained?
Click to expand...
Click to collapse
HALT Noob. Read the rom upgrading instructions first. You must first load "Hard SPL" which will protect you from bricking your phone and allow flashing roms. You need a functional active sync connection to the phone to do this. XP is best, Vista works as well.
After this is done, then yes you would simply extract the two files into a folder and run the exe file. It would then flash the radio only and not effect any of your files or operating system.
Flashing radios takes about 5 minutes when all goes well.
There is a Russian version which includes this Radio
http://rs27.rapidshare.com/files/69....5_radio_sign_22.45.88.07_1.27.12.32_Ship.exe
I hope someone can work out how to strip the radio out.
A
adamcullen said:
http://rs27.rapidshare.com/files/69....5_radio_sign_22.45.88.07_1.27.12.32_Ship.exe
I hope someone can work out how to strip the radio out.
A
Click to expand...
Click to collapse
Thanks! So we have a choice to flash this radio on our device!
Ok, I've downloaded and extracted the ROM. 4 files,
00_Unknown.nb
01_SPL.nb
02_MainSplash.nb
03_OS.nb
was expecting to see a 05_GSM.nb but as 00_Unknown.nb was the correct size (16.7Mb) I've used that one and packaged it.
Try it here...
http://rapidshare.com/files/74644941/KAIS_Radio_Only_1.27.12.32_CustomRUU.zip.html
I'll give it a go
Seeing as I've flashed my phone about 15 times in the past 24 hrs to try to [email protected] around and get the bluetooth stack working properly, one more cant hurt!'
Downloaded ... flashing now
A
Can someone very that this works,
Flashed
Done Dutty,
checking results now.
A
adamcullen said:
Done Dutty,
checking results now.
A
Click to expand...
Click to collapse
Thanks I will have a go and test it on my t-mobile uk network.
Done
Flashed with no probs.
outbound calls work ... seems to be ok.
Going to check if it has improved bluetooth pairing in my carkit.
A
EDIT: Thanks for the walkthrough tubaking, worked great.. Here's the Radio, looking forward to some test results..
http://clutch-productions.com/KAIS_Radio_Only_1.65.16.25_CustomRUU.zip
i'll just tell you how cause downloading for me rightnow isn't working.
1. get htc rom tool and dutty's nbhtool v1.1
2. use winrar to take the exe apart and get the .nbh file
3. use nbhtool to extract nb files from nbh file
4. put nb file containing radio(should be 769.nb and/or be about 17mb) into htcrt in the radio line
5. click build rom
6. put the newly made nbh file into an empty folder along with Kaiser Custom RUU
7. flash just like a ROM
tubaking182 said:
i'll just tell you how cause downloading for me rightnow isn't working.
1. get htc rom tool and dutty's nbhtool v1.1
2. use winrar to take the exe apart and get the .nbh file
3. use nbhtool to extract nb files from nbh file
4. put nb file containing radio(should be 769.nb and/or be about 17mb) into htcrt in the radio line
5. click build rom
6. put the newly made nbh file into an empty folder along with Kaiser Custom RUU
7. flash just like a ROM
Click to expand...
Click to collapse
Thanks man, worked great, hope this radio helps some people out.
so is this one locked too ?
jyavenard said:
so is this one locked too ?
Click to expand...
Click to collapse
nope, just reflashed it with no problems.
Thank you, I will test it...
Edit : Protocol 25.83.40.02H
ericmcintire said:
EDIT: Thanks for the walkthrough tubaking, worked great.. Here's the Radio, looking forward to some test results..
http://clutch-productions.com/KAIS_Radio_Only_1.65.16.25_CustomRUU.zip
Click to expand...
Click to collapse
Where did this radio come from?
AllTheWay said:
Where did this radio come from?
Click to expand...
Click to collapse
Here is the WWE version of new shipped rom and radio ATW. Post 313 has rapidshare for the rom I haven't had a chance to flash it yet.
http://forum.xda-developers.com/showthread.php?t=390748&page=33
This radio works very well for me in Holland. Allmost all the times 3g en gps is blazing fast
mirror or another link?
Reading your message, I am curious to try this radio. I've tried several times, but can't download it, would any of you provide me with a mrrior link?
Can't thank you enough.
jz
jizhu said:
Reading your message, I am curious to try this radio. I've tried several times, but can't download it, would any of you provide me with a mrrior link?
Can't thank you enough.
jz
Click to expand...
Click to collapse
It looks like this radio was not correctly ripped.
P1Tater ripped it again and uploaded it to here:
http://www.4shared.com/file/48281917/abf5d02a/KAIS_Radio_Only_1651625_CustomRUU.html
I'm using it right now and works fine.
vcespon said:
It looks like this radio was not correctly ripped.
P1Tater ripped it again and uploaded it to here:
http://www.4shared.com/file/48281917/abf5d02a/KAIS_Radio_Only_1651625_CustomRUU.html
I'm using it right now and works fine.
Click to expand...
Click to collapse
Thanks, bro,
but still, I can't download from 4shared, probably it is blocked in China. Would you kindly establish a download link in "rapidshare" (slow, but works) or mediafire? Thanks in advance
jz
vcespon said:
It looks like this radio was not correctly ripped.
P1Tater ripped it again and uploaded it to here:
http://www.4shared.com/file/48281917/abf5d02a/KAIS_Radio_Only_1651625_CustomRUU.html
I'm using it right now and works fine.
Click to expand...
Click to collapse
why wasn't it correctly ripped? I used it without problems.
I just found this radio, been using .20.29
My hope is that this has a better battery life, which I will report if it does.
Radio is amazing!
I've been using this radio for 2 days now and it's amazing. I've been driving from MN to Washington D.C. and i flashed this when I was in Ohio. I've been using it for work(and downloading roms) an it's incredible. Let me tell you why. When driving, I've never been able to download a big file because as soon as my phone switches to the next tower, it loses the cennection and I have to try again. Surfing is fine because it's a momentary connection. Downloading a big file needs a constant connection. Switching towers or loseing signal breaks that connection and stops the download. This radio has been able to download 100+ mb files and stay downloading when I switch to new towers, switch to and from 3g, HSDPA, EDGE, GPRS and even when I lose signal for a few minutes even. I've been going through the mountains and it still downloads!!! I have two tilts with me and this one has been holding phone calls when the other won't and gets better signal.
Hello Fellow Kaiser radio users....I need a little enlightenment....
I am running L26 v3 ROM with R 1.65.20.29 (HTC_SPL run to alleviate the laggy freezes) and finding that its eats the battery and takes a while to get GPS fixes in NE Scotland......
Questions are
i) Can I flash a different Radio (only 1.6X.XX.XX types as I understand?) to test for better battery/GPS reception without HARDSPL being on the phone now?
ii) Can anyone recommend a better radio than 1.65.20.29 (L26 v3 compatible) that has actually trialled same?
Thanks in advance!
PJ6363 said:
Hello Fellow Kaiser radio users....I need a little enlightenment....
I am running L26 v3 ROM with R 1.65.20.29 (HTC_SPL run to alleviate the laggy freezes) and finding that its eats the battery and takes a while to get GPS fixes in NE Scotland......
Questions are
i) Can I flash a different Radio (only 1.6X.XX.XX types as I understand?) to test for better battery/GPS reception without HARDSPL being on the phone now?
ii) Can anyone recommend a better radio than 1.65.20.29 (L26 v3 compatible) that has actually trialled same?
Thanks in advance!
Click to expand...
Click to collapse
HARDSPL is the name of the game indeed. For every ROM and RADIo you wanna test outside the stock ones.
PJ6363 said:
Hello Fellow Kaiser radio users....I need a little enlightenment....
I am running L26 v3 ROM with R 1.65.20.29 (HTC_SPL run to alleviate the laggy freezes) and finding that its eats the battery and takes a while to get GPS fixes in NE Scotland......
Questions are
i) Can I flash a different Radio (only 1.6X.XX.XX types as I understand?) to test for better battery/GPS reception without HARDSPL being on the phone now?
ii) Can anyone recommend a better radio than 1.65.20.29 (L26 v3 compatible) that has actually trialled same?
Thanks in advance!
Click to expand...
Click to collapse
I believe all diamond ROMs require 1.65.x.x, I just switched to 1.65.20.29 since the once that ships with L26 v4 eats my battery like little pieces of popcorn. Also, you need to put hardspl back on before flashing anything (radios, roms, splashscreens, etc.) Look at post #729 here: http://forum.xda-developers.com/showthread.php?t=395555&page=73 These are the clearest instructions for moving back and forth that I have seen. I used them and it took me about 2 minutes.
spaanplaat said:
This radio works very well for me in Holland. Allmost all the times 3g en gps is blazing fast
Click to expand...
Click to collapse
How's your battery life? In other words, how much percentage do you lose overnight?
torrin66 said:
I believe all diamond ROMs require 1.65.x.x, I just switched to 1.65.20.29 since the once that ships with L26 v4 eats my battery like little pieces of popcorn. Also, you need to put hardspl back on before flashing anything (radios, roms, splashscreens, etc.) Look at post #729 here: http://forum.xda-developers.com/showthread.php?t=395555&page=73 These are the clearest instructions for moving back and forth that I have seen. I used them and it took me about 2 minutes.
Click to expand...
Click to collapse
New thread that really explains SPL thoroughly and step-by-step instructions here.
Hi !
By freeze i mean: tap the screen or press keys and nothing happens for 2-5 seconds. This would happen to me about once every 2 minutes.
This is what i did:
http://forum.xda-developers.com/showthread.php?t=335568
I used the SPL extracted from the nbh of the official wm6.1 build which reverted my SPL back to the official one. You won't be able to flash a custom ROM anymore, until you install HardSPL again.
I have been using the Kaiser for about 30 min and no freeze.
It was not my idea that it was a SPL issue, someone mentioned this in a thread about the leaked WWE 6.1 (which is identical to the official WWE one)
edit1: This only applies if you installed HardSPL
edit2: Thanks to shafez for being the first to think about this. Apparently i was trying it at the same time as him, so i didn't know he also posted the results, that's why i started the thread as soon as saw the fix worked.
did you notice any other improvements like speed?
RPG0 said:
Hi !
By freeze i mean: tap the screen or press keys and nothing happens for 2-5 seconds. This would happen to me about once every 2 minutes.
This is what i did:
http://forum.xda-developers.com/showthread.php?t=335568
I used the SPL extracted from the nbh of the official wm6.1 build which reverted my SPL back to the official one. You won't be able to flash a custom ROM anymore, until you install HardSPL again.
I have been using the Kaiser for about 30 min and no freeze.
It was not my idea that it was a SPL issue, someone mentioned this in a thread about the leaked WWE 6.1 (which is identical to the official WWE one)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2230736&postcount=206
It seems change the pagepool to 16MB helped. I tested, it works for me.
Thats more like it ..
xwaiz said:
http://forum.xda-developers.com/showpost.php?p=2230736&postcount=206
It seems change the pagepool to 16MB helped. I tested, it works for me.
Click to expand...
Click to collapse
can some1 post in this thread how to fix the pagepool? some sort of manual?
thnx a lot
NoFatePPC said:
can some1 post in this thread how to fix the pagepool? some sort of manual?
thnx a lot
Click to expand...
Click to collapse
kyphur has a pagepool patcher program that allows u to modify pagepool of ur rom nbh very easily.
use search; its on here. use a phrase like "kyphur pagepool patcher" which should bring up promising results.
SSOO
what you did exactly?
u changed PP or flashed another SPL, if its SPL, could you post it?
xwaiz said:
http://forum.xda-developers.com/showpost.php?p=2230736&postcount=206
It seems change the pagepool to 16MB helped. I tested, it works for me.
Click to expand...
Click to collapse
I don't doubt that you are experiencing better behavior, but I would like to get some more information on this from a developer who actually understands the mechanics here.
I am certainly not that person, but as I understand it the SPL is a bootloader. As such, I'm not really sure what it has to do with operation of the OS after the OS is booted.
In addition, everything I understand about the pagepool, and changing the pagepool, I have a hard time understanding how a different SPL is going to change the size of the pool.
Again, I don't doubt your experiences, and even if we get 100 people saying this worked for them I would like to understand why this would possibly work.
Any actual developers have any input? (please, my amateurish suppositions are enough guesswork, if you don't have educated answers there isn't need to postulate).
Can you upload the 6.1 spl here and this should work on an MDa Vario III right?
Don't really know much about all of the techie stuff but I have also found that by reducing the cache sizes to "advised" and the PP to 16MB I do not experience any freezes. I have been running Dutty's test and also tried it with both L26 Roms and it works every time.
Just flashed the official new rom om my brand new phone and I´m not having any freezing issues. The phone was not hardspl as it was new out of the box.
I am certainly not that person, but as I understand it the SPL is a bootloader. As such, I'm not really sure what it has to do with operation of the OS after the OS is booted.
Click to expand...
Click to collapse
I´m not into the workings of the device and not a hacker/programmer of any kind but what comes to mind is that if there is some incompability with the bootloader and the OS and the bootloader loads the OS the wrong way it seems natural to me that you will get errors that may result in strange behaviours of the OS. It may not be a large error and therefore the OS loads but with faults resultning in "bugs".
or its simply a bad rom. I will refrain from going to hardspl and testdrive the rom for a few weeks and se if I can come up with som errors.
can someone maybe upload german fixed version? thank you!
16 mb page pool really helps!
Very easy to do just using xda page pool patcher.
Do not forget to click "Save" button and then "Analyse" again to confirm .nbh file was updated successfully.
n00b question:
What is a nbh and pagepool? Will this affect the performance? I'm trying to learn as much as I can.
I don't post a lot, and I do not know the technical ins and outs of the SPL, but here is a theory. While browsing one of the threads regarding the video acceleration drivers, someone mentioned that the SPL could have something to do with initiating video acceleration. If this official release was supposed to have any sort of graphics fix, maybe something exists in the SPL of the official release that doesn't exist in HardSPL, and that is the reason we are experiencing the freezes. Just a thought.
bengalih said:
I don't doubt that you are experiencing better behavior, but I would like to get some more information on this from a developer who actually understands the mechanics here.
I am certainly not that person, but as I understand it the SPL is a bootloader. As such, I'm not really sure what it has to do with operation of the OS after the OS is booted.
In addition, everything I understand about the pagepool, and changing the pagepool, I have a hard time understanding how a different SPL is going to change the size of the pool.
Again, I don't doubt your experiences, and even if we get 100 people saying this worked for them I would like to understand why this would possibly work.
Any actual developers have any input? (please, my amateurish suppositions are enough guesswork, if you don't have educated answers there isn't need to postulate).
Click to expand...
Click to collapse
Isaygarcia said:
SSOO
what you did exactly?
u changed PP or flashed another SPL, if its SPL, could you post it?
Click to expand...
Click to collapse
I only changed pagepool to 16MB. Did not touch SPL (I think I'm using hardSPL).
Follow up: still no hang/freeze.
To sum up:
after flashing some 6.1 cooked builds around here, i noticed the device would stop responding, i tried two of Dutty's, one Vista, the Diamond V1, maybe some other too. They all had this issue, so i just waited for the official one, hoping that the freezes would be gone. They weren't.
So here's how i fixed it:
I flashed back the original 6.0 official ROM and saw there were no hangs / freezes. So the HW was ok.
After that i flashed the official wm 6.1 from HTC. Then i followed the "Idiot steps" (http://forum.xda-developers.com/showthread.php?t=335568) without any shortcuts (first 14 steps, i skipped step 15 ) and used the 6.1 ROM, not the 6.0 ROM to obtain the nbh file. Flashed the official SPL and hard reset.
All is well now (except i have to remove HTC Home and soft reset to use iGo).
No freezes for a day.
gauntman said:
Just flashed the official new rom om my brand new phone and I´m not having any freezing issues. The phone was not hardspl as it was new out of the box.
Click to expand...
Click to collapse
This supports my theory that 6.1 needs another SPL, probably not compatible with the old HardSPL
xwaiz said:
http://forum.xda-developers.com/showpost.php?p=2230736&postcount=206
It seems change the pagepool to 16MB helped. I tested, it works for me.
Click to expand...
Click to collapse
what is the original pagepool of the WM6.1 ROM just in case I want to revert back to it?
RPG0 said:
This supports my theory that 6.1 needs another SPL, probably not compatible with the old HardSPL
Click to expand...
Click to collapse
Just one question. What Country ID I should set in htc rom tool, to make it look exactly like UK htc branded kaiser?