I am using mUm's WM6 and I have a 4GB TopRam miniSD card. Everytime I reset my phone with the miniSD card inside, the card becomes corrupted. Sometimes certain files become corrupted but this past time the entire card became unreadable.
Anyone having this problem?
ladude626 said:
I am using mUm's WM6 and I have a 4GB TopRam miniSD card. Everytime I reset my phone with the miniSD card inside, the card becomes corrupted. Sometimes certain files become corrupted but this past time the entire card became unreadable.
Anyone having this problem?
Click to expand...
Click to collapse
Im sure that wizard can only read up to 2Gig card's.
THe same thing happens with me & my card is 1 gb
I'm pretty sure I read somewhere that formatting the card with a smaller cluster size might help. I can't remember where I read it though.
i had the same problem, what kind of card do you have? i had a TopRam card, it worked fine for about 3 days then died completely on me, i got it exchanged for a new one but it won't even read it
what blocktransfersize do you have...just curious..
hklm/drivers/class/sdmemoryclass/ ?
Related
I've had a A-Data microsd HC 8GB card with miniSD adapter for about two months. It all worked well until I took the card out of the phone and put it into a card reader. The computer recognized the card, I transfered some big files (it's quicker to transfer than using USB...) and then ran into problems with my P3600. First, no card was found by PPC. I made a few hard resets, formatted the card, tried other roms... Nothing seemed to help, so I took the card back to service and they gave me another one right away (a replacement). Of course I was very excited since I cannot live without some memory in my HTC. Inserted the new card and... again nothing, saying "Not installed". Yes, I read there are problems with SDHC cards, but I'd like to get it working as soon as possible (tomorrow I'm going to Germany, so I'd really need it), if no solution, I'll have to be statisfied with my old 2GB MINISD.
Any solutions here??
Tried almost everything.
Thanks,
e
have you tryied with a different adaptor?
no... i was thinking about trying my father's but i don't want to mess up thing for him also. the the microsd -> minisd -> sd -> computer seems to work just fine
SDHC Problems
I think you musst format the sdhc card in --> importend---> FAT32 FORMAT
on you Pc!
Check file manager
Using File manager check that, when you removed the card, the OS didn't create a new Storage card. If it did, your card will become Storage Card 2 and not function correctly.
The cure is to remove your card, delete Storage card from My Device, put your card in and soft reset.
Good luck.
I risked my father's MINISD adapter and it works... so it was the adapte causing all of the problems :/ I'll go and buy another one.
Thank you for your help anyway!
Bye,
Hello,
can you tell me what you did to get this micro SDHC to 8Gb work ?
I only see half of the capacity on my HTC 3600 ?
LodeDeprez said:
Hello,
can you tell me what you did to get this micro SDHC to 8Gb work ?
I only see half of the capacity on my HTC 3600 ?
Click to expand...
Click to collapse
Hi,
I have the same problem, my P3600 only see 3,6GB in 8GB Micro SDHC.
o cara said:
Hi,
I have the same problem, my P3600 only see 3,6GB in 8GB Micro SDHC.
Click to expand...
Click to collapse
I have the Sandisk 8 Gig microSD w adapter in my Trinity and it works perfectly. In fact it is the best memory card that I've ever used going back through all of my PPC devices. It hasn't had even one single issue.
o cara said:
Hi,
I have the same problem, my P3600 only see 3,6GB in 8GB Micro SDHC.
Click to expand...
Click to collapse
which ROM/windows verion are you using? you might need to flash a different one or apply a fix - search and you'll find-it
Only 4GB SDHC work in default Rom WM5
Update to WM6 and 8GB SDHC working fine.
I have just taken delivery of my Touch Pro. I inserted my 8GB into slot (correctly) however, when I go to memory/storage card it says not installed.
Any comments, help or ideas most welcome. The card is Sandisk and was working in the phone I took it out of.
How is the card formatted, what phone did you use it in?
likely the card... but try another?
i just put a 16Gb micro sdhc in yesterday after direct copy from my 2Gb to the 16Gb, popped it in and it was fine (had to reinstall iGo but nothing else needed to be done with all other apps installed in phone memory)
Sounds like it needs formatting perhaps? Hard to think what else could be going on there, but TP took my 8GB card without problems, and is now running with my 16GB card without problems.
like a few other people said already...formatting...that should do it!
I did excatly the same thing with a 8GB Sandisk Ultra. It worked first time no problem.
There are A LOT of fakes on eBay which are incredibly hard to distinguish - I got a Sony Memory Stick that just had lots of write and read errors and just stopped working. You might wanna check if the problem persists.
topspeclt said:
I did excatly the same thing with a 8GB Sandisk Ultra. It worked first time no problem.
There are A LOT of fakes on eBay which are incredibly hard to distinguish - I got a Sony Memory Stick that just had lots of write and read errors and just stopped working. You might wanna check if the problem persists.
Click to expand...
Click to collapse
I was just about to say, it sounds like an ebay fake to me !
Thanks everyone. Formatted it on my PC now TP sees the card.
how do u formated it can some1 explain that to me
?
phillyman said:
how do u formated it can some1 explain that to me
?
Click to expand...
Click to collapse
Place it in a computer, right click over the drive icon, format.
I formatted my Touch Pro 2 with Fat32 format, and it will only see 8G and it's a 16G. What's the deal?
Hello all, I recently upgraded to the ATT Fuze and then installed an AData 8 Gb MicroSD card. The issue is sometimes the phone will not detect the files in the card. So if I restart my phone everything works fine and the phone sees all files in the SD card with 80 mb used. If I restart again the phone takes a long time to view memory of the storage card and then shows nearly the entire 8 gb used. File explorer show the folders but none of the files in the SD card.
If I remove the MIcro sd card and plug it directly into my laptop then it shows the actual space use and al the files correctly.
Anyone see this issue or how to resolve it. I have already replaced the phone once. SD card works perfectly when used in a laptop.
IS THIS A PROLEMWITH THE PHONE OR THE SD card.
Please help
Why don't you try re-formatting the memory card?
If you've replaced the phone and you're still having the problem, I'd say it's the card.
I use a SanDisk 16GB MicroSD in my Fuze and have never had any problems with it.
I have reformatted the card multiple times using both vista and Xp and still the same results. The card works just fine on my laptop. When I put the card in my phone it does not detect the card till I soft reset the phone. After it comes up, the phone will see the card but show space used as the entire 8 gb even if the card is empty.
I have ordered a new Kingston 8 gb card. Hopefully that will work
Sometimes there are compatibility issues with certain cards. I use a Sandisk 8gb card and it works well. TP reads and writes quickly to it. Try this other card you ordered then adise results here. Good luck.
HTC recommends Sandisk.
I use sandisk 8 Gb Micro SHDC Mobile Ultra with the Tyynt sdtune up cab!
Suggestion
Format the card sell it and buy a real sandisk ;-)
Yea! will try the Kingston. What is the sdtune up cab file. I could not find such a file.
I too
Hi, i have the same issue with same A-DATA SDHC 8GB Class 6. On PC everything is ok, but when i put it in TP (no branded) PDA didn't recognize it. I reformat it 10+ times, same. I make some experiments and realize that when on the card i have to 2GB files work fine, but when i exceed that limit the card stops to mount in file system of TP. I fill the card to max with some stuffs and place an image file, then try to flash the phone with it, the strane is that the phone is flashing ok, but after flash and hard reset the card didn't mount at all. If i change the image file i can flash again, but in file system i haven't card. Very strange. I use few roms ot NRZ28. Do you think that the problem is in any dll in rom or the problem is in card. Becouse bootloader see and use card, but the system didn't.
p.s. Sorry for bad english.
My Kingston SD card works. The only difference I can see between the two is that the AData is a class 6 while the Kingston is a class 4.
maybe the Fuze has an issue with class 6 cards?
I am using the ADATA 8G MicroSDHC memory card without any problem for my HTC Fuze. This is a Class 6 card from Newegg.
Yea, I had bought the exact same one! Dunno why it didnt work for me!
i am using an 8GB Adata microSDHC card from Newegg.com and my HTC Fuze will NOT see it. I have tried everything I know (very computer knowledgeable). Checked the reg settings, etc. but it will not ever see the card even after reformats and reboots. The card works fine in laptop and other devices, but not my HTC Fuze... ???????
I had big probs with my 8 gb sandisk: Files and folders were lost after a time... i formatted with a lot of utilities, nothing helped now i use kingston without any probs on my TP ...
Greetz
Boris
hsiaochungwu said:
I am using the ADATA 8G MicroSDHC memory card without any problem for my HTC Fuze. This is a Class 6 card from Newegg.
Click to expand...
Click to collapse
same except a transcend. works great with my transcend adapter + Reader
**** Smith
I purchased DSE 8Gb card, like you could see it, reformat it & everything worked a treat on the PC, but when putting into the TP it was a very different story!
Sometimes it would see it, sometimes not, very hit & miss affair without any reliably repeatable circumstances, so took it back, tried another one - same issue, then sucked it up and went to purchase a Kingston one (5 bucks cheaper)... it worked first time and haven't had (touch wood) a problem yet!
mariobg said:
Hi, i have the same issue with same A-DATA SDHC 8GB Class 6. On PC everything is ok, but when i put it in TP (no branded) PDA didn't recognize it. I reformat it 10+ times, same. I make some experiments and realize that when on the card i have to 2GB files work fine, but when i exceed that limit the card stops to mount in file system of TP. I fill the card to max with some stuffs and place an image file, then try to flash the phone with it, the strane is that the phone is flashing ok, but after flash and hard reset the card didn't mount at all. If i change the image file i can flash again, but in file system i haven't card. Very strange. I use few roms ot NRZ28. Do you think that the problem is in any dll in rom or the problem is in card. Becouse bootloader see and use card, but the system didn't.
p.s. Sorry for bad english.
Click to expand...
Click to collapse
Mariobg, I am in the same situation you are. I am using NRG Energy Rom 2.0 4/14/09. I am having the same problems with my A-DATA micro SDHC 8GB Class 6. I also own a SanDisk 512 MB micro SD card that works no problem. I will try flashing to a different ROM to see if that fixes it. Did you ever solve the problem.
Adata issues on rapahel
Hi there , i have the same problem with this &*^&*%$ Adata card on my raphael.
Rom : Elite rc3
Tried Hard Reset
Tried Soft Reset
formatted it untill it was smoking.
Learned one thing with this....first read...then buy.
Well I tried several different ROMs and still no success. i ended up trying the memory card in my friends HTC Fuze, and it did not work either. He had a 4 GB micro SDHC A-data card that works great. So I tried his card in my phone, and it also worked great. So, it appears that the 8 GB A-data card is defective. I am going to RMA it tomorrow.
ryandsouza said:
Yea! will try the Kingston. What is the sdtune up cab file. I could not find such a file.
Click to expand...
Click to collapse
You can find his cab here:
http://forum.xda-developers.com/showthread.php?t=446366
But, unfortunately, it did not solve my problem.
I have a Class 4 Kingston 8GB MicroSD that was in NTFS format. My HTC Fuze couldn't see it until I format it in FAT32. Works now .
i got a replacement xoom and when i tried putting in a memory card in it, the memory card would get stuck. i managed to get it in but now it gets super hot when its plugged in the xoom. any reasons why?
I would remove it very carefully but it sounds like something is wrong. One of the metal prongs/leads/whatever on the card may have gotten skewed and could be causing mischief.
actually i think its the memory card cuz i put another one in and that one works and doesnt get hot. by the way the memory card i tried first i had it in my evo and then a few days back i had a notification saying blank SD card, do you think thats the problem?
carbaj12 said:
actually i think its the memory card cuz i put another one in and that one works and doesnt get hot. by the way the memory card i tried first i had it in my evo and then a few days back i had a notification saying blank SD card, do you think thats the problem?
Click to expand...
Click to collapse
it sounds like your memory card has either gone corrupt or is trying to. I would suggest backing up your data on that card. I say this because the memory card that I have for my Droid 2 started doing that as well as *uninstalling* all my apps that I placed on the SD card (saying that the files were never there and such, but when placed on my Windows 7 computer, it would be there,) and then would bog my phone down while trying to read the card. I tested to make sure it was not the phone itself (which it would have sucked!) and the same thing happened in two other android phones, proving it was the SD CARD because other (as well as newer too) SDCARDS I had laying around and none of them had this trouble. Even a SD Card testing APP on the market said "Uh yeah... it's dying!"
Because Android is on a linux flavor, it likes to KNOW EVERYTHING on the card or it just does not care for it and then treats it like a blank card. I would suggest that if you want to try and salvage the card, do a quick format AND I WANT TO MAKE THIS CLEAR: to the same file allocation system (aka Fat16 to fat 16, Fat 32 to fat 32, NTFS to NTFS. DO NOT CHANGE THIS unless you know what you are doing!) Also note DO NOT do a full format because this will write to every sector of the SD Card, and that is really really bad for the SD card as well as any flash memory...
A quick format just goes over the file allocation tables (a table that stores information for where the information is located on the card) and then try it again. If problem persists, call manufacturer of the card or where you got the card originally (evo = call htc, droid 2 = call motorola, ETC) and see if it is still under warranty.
Good Luck and I hope I helped you out some
hi
i read a post a while ago about 128 SD card problem that when you enter 128gb SD card the device start restarting is the issue has been fixed ??
i am about to buy one
KBEERR said:
hi
i read a post a while ago about 128 SD card problem that when you enter 128gb SD card the device start restarting is the issue has been fixed ??
i am about to buy one
Click to expand...
Click to collapse
My phone never rebooted, I have a 128 GB SanDisk Class 10 sd card. But after like a few weeks or months I got a sd card error and soon after that I couldn't access any files on it.
Only rebooting solved the issue, but once I got it it would occur more often and often, sometimes every 2 days and sometimes multiple times a day. Formating the SD card made it work again for a few months until it started all over again.
I formated it to different formats (in windows), I also formatted it with the phone itself, nothing helped.. I'm constantly running out of space now because I only store my music and photos on the sd card.
I never tried a different sd card long enough to recreate the problem, but I used this sd card for a few months on a different device.
If someone fixed this please help me I'm so tired of this :crying:
I have a 128Gb Sandisk in my Mate 7, runs with no issues at all. Maybe clean your contacts?
RobboW said:
I have a 128Gb Sandisk in my Mate 7, runs with no issues at all. Maybe clean your contacts?
Click to expand...
Click to collapse
To be honest I never tried it lol, but if rebooting the phone solves the issue I don't understand how dust or dirt could be the problem. I will try it anyways, maybe it works :cyclops:
Tazmaniiac said:
To be honest I never tried it lol, but if rebooting the phone solves the issue I don't understand how dust or dirt could be the problem. I will try it anyways, maybe it works :cyclops:
Click to expand...
Click to collapse
Cleaned the sd card and the sd card slot as good as possible, but after a few days I had the same problem again... Maybe my sd card is broken but I can't really test it so I guess I'll live with this forever...
Just now it came to my mind that I could've bought a fake SanDisk card, even though I got it from amazon. I will test it tomorrow I think.
Maybe.
How is it formatted? Probably most compatible to format to FAT32.
I have a 64Gb card in an old phone that was supposed to take a maximum of 32Gb and it works fine when formatted the right way.
RobboW said:
Maybe.
How is it formatted? Probably most compatible to format to FAT32.
I have a 64Gb card in an old phone that was supposed to take a maximum of 32Gb and it works fine when formatted the right way.
Click to expand...
Click to collapse
It is formatted exFat right now, I formatted it quite a few times since i got the card so I don't know whether I always had exFat or not. I'm checking the SD card now for it's real capacity, with 100 GB left it will take 8 hours, but if it's really a fake card it should cause errors way earlier I think. If that's not the problem I'll wait until I have time to flash KangVIP, then I'll re-format the sd card and do some cleanup while I'm at it.
i bought a 128gb samsung evo+ sdcard and working great so far