i have Most Beautiful Ed. on my MDA Wizard. I've tweaked it raw. However i would really appreciate having decent size scroll bars again. Theyre so thin,i wouldnt even try to use my finger on the screen.<(which i have a habit of) Anyhow,if anyone has a cab or any insight on this topic i would appreciate it very much. Thanks in advance!
just change the following registry values:
HKLM\System\GWE\cyHScr
HKLM\System\GWE\cxVScr
HKLM\System\GWE\cyVScr
HKLM\System\GWE\cxHScr
to whatever you want... default is 13
i find 10 to be perfect for me...
thanks but...
as you know i am a noob so i was wondering if any of the "senior members" in this forum could just come up with a cab to download onto the MDA. i dont feel like nor do i know how to change registry values. i havent a clue where to find HKLM in my file explorer. Haha...i know thats funny to "senior members". Hell,i've seen cabs for dumb crap. At least this would be worth it. Ha! Thanks in advance again.
Maydwell said:
as you know i am a noob so i was wondering if any of the "senior members" in this forum could just come up with a cab to download onto the MDA. i dont feel like nor do i know how to change registry values. i havent a clue where to find HKLM in my file explorer. Haha...i know thats funny to "senior members". Hell,i've seen cabs for dumb crap. At least this would be worth it. Ha! Thanks in advance again.
Click to expand...
Click to collapse
Just download PHM Registry Editor, Explorer is 'file' explorer, no registry
Eelco
thanks!
eelco,you are the best! this website is just flat out awesome. its sad that more than 50% of the population with these wizards dont have the balls to tweak and upgrade theirs. all in all, i think im going to try and become a senior member here.(hopefully one day)
wait i take it back...
i downloaded it onto my MDA,went to the files up above HKLM/system etc. and changed the values of those 4 files. it didnt fix it at all. the bars didnt change in size. is it possibly because i changed the "decimal" as appose to the "binary" or "hexidecimal"? or maybe a re-boot neeed afterchanging the value? please let me know,thanks! edit: it needed the re-boot..thanks to all who cared about my woes ,ha!
go and recheck if the value you have changed is there or not.
If not then again change the values and wait for sometime may be 30 sec and close all the application from memory in setting and then reset it will change.
A program called registry wizard will help you do it automatically as well. A bit easier if you never have tweaked your registry before. (Although it is a good thing to learn how to do anyways). You should be able to find registry wizard fairly easy by using the search function for the forum.
if u find changin ure registery difficult get d tweaks 2k2 software it will do d job!
Related
pls help me.im tryign to sell my xda lli,i install a pic whenever me sort reset the xda a topless woman will appeal in the screen.
I thought hard reset this pic will gone..no,its still there.
help me guys.
If anything is there after a hard reset it must be in \Storage
change your splash-screen
Your splash screen isn't stored in storage. On my magician eg it is a separate part of the rom. You managed to change it once & I'm sure you can do the trick again. Just search the ftp for the cab which will flash your splash. If you kept a copy on your PC it's even more simple. And next time use an image that doesn't make you so embarrassed when you wanna sell your device
M
i have lost the cab file...
OK, how to ditch your t.ts.
Found this for u, at the magician upgrading etc. forum:
hshortt said:
Maybe it's just me, but I've read this post here and at Howardforums and I'm clearly missing something.
I've only ever used the nb_image_converter_859_418.exe to convert "any" bmp to the Splash2.NB file.
Then I drop that into my Windows Folder and use MDA3_bootimage_changer2.cab to apply the file. (Yes I'm using a Magician with this file!)
Soft reset and that's that. No need to do any cab file editing.
Cheers
Howard
PS. I've have both tools on my pc and can repost them, but they are from this site!
- http://www.howardshortt.com
Click to expand...
Click to collapse
I use this method myself and it works great. Maybe for your device as well. In the same thread, 3rd sticky I belief, they mention an other tool as well.
Good luck with your lovely lady,
M
can i delete the pic in somewhere the boot image file store?
Is she good looking?
(I'm sorry, I just couldn't resist LOL)
she is beautiful
So you soft-reset every hour LOL. Can you pm her I'm getting very curious to see what where talking about?
Still not found the correct cab?
stressss...
Must be quite a challenge to soft reset 20 times in 5 mins with only one hand free :lol:
Gajet: Dude, you ain't right...LOL
i need someone to help me with it...
Hey guys, I have a quick question.
Is it possible to have the unlock codes of purchased applications already in the cab when I'm cooking it?
So I don't have to do input them every time I make an adjustment to my rom.
Unfortunately I won't be sharing the rom... I have a conscience.
2nd Question...
In abusalza's PDACornerUltimate.V10-20931
The Manila 2d Has a landscape mode that "somewhat" works, is this a personal fix or is it included in the lastest Manila 2d Cab?
Thanks Everyone
As for your first question, it is possible but time consuming and tricky. What you'll have to do is find out where the key goes when insterted in the program into the registry (there are programs to see how the registry is altered after a certain move). After that, you'll have to insert that key into the CAB (probably better to do it before making the OEM) which you'll have to use something like WinCE CAB manager. This can be done to most programs and games, not all though.
would I be able to create an OEM out of the program files in my phone, it wouldn't be cab?
Metallic-Force said:
would I be able to create an OEM out of the program files in my phone, it wouldn't be cab?
Click to expand...
Click to collapse
No, i've never seen that nor do i think it's possible. I really wanted to do the same thing, however going through many threads and asking so many people about it, i figured it was easier to manually register everything.
Ok great, well that's one down.
Thanks alot Kareem.
Anyone wana take a shot at the other question?
Use Sashimi auto Installer for REG files.
fire use PHM to make a backup of your REG
then register
use PHM again
use find the adjusted REG edits using a REGistry comparer
put the REG files into Sashimi, read up on SAshimi to set it up. and his website has more info on how to do exactly what i said above. incl video
it took me all of 3 hours to learn sashimi and its great..
As for the Second Question, Ask in the thread concerning it.
ive not seen it in the HD3 Releases Im using.
I'm doing that right now.
Another Question.
Do I have to back up my registry from my cooked rom, or can I back up my current rom that has all the applications installed and registered.
kareem9nba said:
.... What you'll have to do is find out where the key goes when insterted in the program into the registry (there are programs to see how the registry is altered after a certain move)....
Click to expand...
Click to collapse
Can you name what the program is? please, i'm interested in this. Thanks.
Hi I am new to this, i downloaded and installed the Diamond TF3d Config tool but I get that exception error. i am not sure what to do. i am pretty dumb when it comes to changing my registry i get to the key pressure threshold i got to modify and it reads as folows:name preassure threshold value (dec) 43 and value (hex)2b. Iread your info but not sure what a dword is or what to change. can you help? i have the Verizon HTC touch Pro if that helps.
Forward Message
im having the same problem... i think we need a certain version.
you need to go into programs through file explorer and delete the tweaks file in the tf3d config folder
then it will work on the touch pro
Thank you ibmxx187
I did what you said and it work perfectly, thanks again.
Thank You..
this is why search helps noobs like me out.. thanks again!
Um, delete tweaks?
Ahh, yeah well deleted the tweaks like you said, and it finally opened the program. 1 problem though. Obvious one here, the main reason i wanted this was for the tweaks, guess what, i just deleted them. Useless.
Than you very much ibmxx187
thankyou so much ... Deleting the Tweeks file enabled the application to run
Thanks Again
alright..i upgraded to opentouch 6 some time ago and realized that it was really awkward to use when i tried to use my paint program...it would scroll about the screen annoyingly. then i realized that there was a simple kinetic function that was added when i upgraded my rom. although a nice feature, is there a way to disable it? its so hard to draw when my work runs away from me after every flick of my stylus. XD
any help would be greatly appreciated. thank you very much!
1. This is the development sub forum. This is not a development question. This needs to be moved to the Herald section.
2. No. There isn't a way, per say, short of extracting the touch.dll from the default ROM, turning the module into a file and inserting it into the ROM.
3. OpenTouch 6 is an old ROM, but even with it, the scroll shouldn't be causing the problems you're describing as long as you draw with your finger tip, not with a wide area of your finger.
i dunno how to move stuff...just sayin..
well do you have any idea where i can find the original touch.dll from the factory settings for my htc wing?
avel7the7hated said:
i dunno how to move stuff...just sayin..
well do you have any idea where i can find the original touch.dll from the factory settings for my htc wing?
Click to expand...
Click to collapse
You'll have to download the default RUU, then open the exe with a zipping program (like 7zip), then extract the NB out of the NBH. Then extract the files from the os.nb. Then convert the touch.dll from a module to a file. It's a relatively simple process, it just takes a while to do and requires some work.
Although, now that I think about it, if he makes his ROMs anything like I do, go to:
[HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings]
with a registry editor and change:
"EnableScroll"
from 1 to 0.
If you're not sure what a registry editor is, please read up on it. You don't want to mess with the registry unless you understand it. Search around and you'll see quite a bit of information for it.
I suggest using PHM Regedit or CeRegEditor.
it worked...thanks alot!
My bad in advance if this question is off topic.
Lets you say you flashed the stock rom [why i don't know] or one of the roms hanging around here. The RUU goes to 100%, you set the screen, the time, you get a peek at the home screen (lookin pretty plain there) only to be told to wait 3 seconds. A couple things run get a little progress indicator and the thing reboots.
Now your home screen is looking different. Couple plugins enabled, others disabled. Been scouring XDA regarding this and only found scant references here or there about setting your thing up to install cabs off an SD card. I'm looking for something more in the neighborhood of having different plugins enabled, possibly settings too.
Anywho if you know of where I can get some reading in about this type of stuff, lemme know.
It's the built-in autorun. There are also many different third party alternatives. A few are in SuperJustKitchen v0.7.
Besides that, I'm trying to decide if this is offtopic or not... Technically it has to do with cooking....
ivanmmj said:
It's the built-in autorun. There are also many different third party alternatives. A few are in SuperJustKitchen v0.7.
Besides that, I'm trying to decide if this is offtopic or not... Technically it has to do with cooking....
Click to expand...
Click to collapse
hehe i'm walking a fine there...
I was wondering who were those guys and what are they doing in my kitchen? Autorun, check autorun, and run cc From what I gathered about those programs is that runcc is like autorun but newer. My guess in using them is setting up some sort of txt file and pointing runcc or autorun to it.
If so what can I put in that txt file, coz I know i can't write something like "uh... dood, I don't want titanium enabled, I want this one enabled with this setting and that setting ticked... and while you're at it can you fiddle with that one over there, and lets throw some cabs on there shall we? they're over here..... you're not done yet, now I want you to monkey with the settings like so... alright now get the hell out of my office!"
If I could I would...
Whatever information you can point me over to would be cool.
Thanks
Dr.Gonz0 said:
hehe i'm walking a fine there...
I was wondering who were those guys and what are they doing in my kitchen? Autorun, check autorun, and run cc From what I gathered about those programs is that runcc is like autorun but newer. My guess in using them is setting up some sort of txt file and pointing runcc or autorun to it.
If so what can I put in that txt file, coz I know i can't write something like "uh... dood, I don't want titanium enabled, I want this one enabled with this setting and that setting ticked... and while you're at it can you fiddle with that one over there, and lets throw some cabs on there shall we? they're over here..... you're not done yet, now I want you to monkey with the settings like so... alright now get the hell out of my office!"
If I could I would...
Whatever information you can point me over to would be cool.
Thanks
Click to expand...
Click to collapse
RunCC is meant as a replacement for Autorun. Autorun just requires a text file while RunCC requires a Lua that points to a text file.
There are a few walkthroughs but nothing concrete on how to create a good autorun file.
Some of the commands are:
The lock screen command (I forget what it is)
EXEC: (Execute the following)
CAB: (Install the following cab)
CPY1: (Copy from this)
CPY2: (Paste to this)
RST: (reset the phone)
In the older Autoruns, to set a theme you'd use:
EXE: along with a program that set the theme
In the newer Autoruns, you can just set it with:
TSK: \Windows\theme.tsk
Unfortunately, neither works with WM6.5.1 so you have to set the theme with an EXT with many files and registry keys.
There are a few other autorun apps that people in xda have made that can do more, like be able to run your own custom config from your SD card if you want every ROM to have certain things automatically configured (as long as all the ROMs support the particular auto-configuration utility you have configured for.)
To tell you the truth, I never bothered much with Autorun unless I had to replace a file that needed to be one version for the rom to load the first time and another after the first time set up was done. Realistically, you can do almost everything with a simple EXT package.
ivanmmj said:
Unfortunately, neither works with WM6.5.1 so you have to set the theme with an EXT with many files and registry keys.
Click to expand...
Click to collapse
Now ain't that a kick in the pants
ivanmmj said:
To tell you the truth, I never bothered much with Autorun unless I had to replace a file that needed to be one version for the rom to load the first time and another after the first time set up was done. Realistically, you can do almost everything with a simple EXT package
Click to expand...
Click to collapse
I was thinking the very same thing. Something's telling me that I need to try out that "Create Ext" button. Maybe throw whatever reg keys I want played with in that file? That would be more simpler than creating an auto run thingie. Hmmm... if that is the case I guess I would to just need to know how to tinker with my home screen and settings from the registry.
Dr.Gonz0 said:
Now ain't that a kick in the pants
I was thinking the very same thing. Something's telling me that I need to try out that "Create Ext" button. Maybe throw whatever reg keys I want played with in that file? That would be more simpler than creating an auto run thingie. Hmmm... if that is the case I guess I would to just need to know how to tinker with my home screen and settings from the registry.
Click to expand...
Click to collapse
The easiest way to learn is to take a CAB that does something you like and converting into a EXT and looking at the registry settings it creates.
ivanmmj said:
The easiest way to learn is to take a CAB that does something you like and converting into a EXT and looking at the registry settings it creates.
Click to expand...
Click to collapse
That definitely helps, as well as using a reg editor to find out what has been done after installing a program then exporting the key to throw in the app.reg file. The real fun part was tracking down basic settings for things like button settings, today items (and their settings), and default theme (boy was that a blast!) Thanks again for clearing up the confusion