Database Info

Changing bootscreen (XDA Neo, G4)

Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!

Yes
Read through this thread - there is a bit in the middle that discusses this
http://forum.xda-developers.com/showthread.php?t=300356

animelover said:
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Click to expand...
Click to collapse
See also on xda ftp

here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...

What boot screen are you looking for? Or do you want to creat your own one?

Yes, I want to use my own! It's an Anime picture like my nickname!

welcom screen
ady_uaic said:
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
Click to expand...
Click to collapse
well i had read the forum instructions and for change boot and welcom screen.
but something is wrong with the typho5. its suppose to extract nb 9200000 files but the application starts without extracting nobthing.
i would like to change the welcome screen from the PDAMobiz to some thing personal. i follow instruction but they dont fit the results i get.
any idea?
thanks to all
specially to the guys in PDAMobiz, who made the best of the best Rom

I want too to make a personal bootscreen...if someone can help us with a little tutorial, we are waiting..thx

Try this
The pdf manual in this thread has a section on updating boot screen and all the tools required to do it are included too.
I do not suggest everybody trys to get into the ROM cooking that is also described, but the splash screen section is fairly straitforward
http://forum.xda-developers.com/showthread.php?t=297027

first, with this tool you can create your own ROM (customized)...and also splash screens...see the manual pdf

welcomehead.96.png
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable

You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
xmanmaster said:
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
Click to expand...
Click to collapse

flykthewiz said:
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
Click to expand...
Click to collapse
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...

Worked for me
You do need to use a prophet nvid ruu program though
ady_uaic said:
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Click to expand...
Click to collapse

can you please tell me what exactly should I do?

Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment

GAMBIT999 said:
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
Click to expand...
Click to collapse
so everything that you've said there, in that txt file, is for qtek s200, isn't it? now i'm going to try

in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.

ady_uaic said:
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
Click to expand...
Click to collapse
If you have created your nk.nbf file, you can replace the one in this file (rename it to zip)
rename it back to exe and execute, it worked on my prophetG4 with WM6 on it

how can I cook a ROM by myself?

You never told anybody how to do it and then you complain of constant requests
I don't want to cook Wm6 I just want to change some files in my current WM5 Rom!
Could you please tell me how can I do it?

It does not need to be told how to do it, but told how to search ! A lot of people here know how to do it, just GOOGLE it !

sorry, I've already searched... Maybe I'm searching badly!
Could you please help me?

Basically you need to extract the ROM installer, you will find an nbf file in it, then get an NBF file converter, to convert it into some sort of editable format, then you start cooking the ROM, placing whatever you want, and in the end, convert it back into NBF

Hello,
You might find something useful here:
http://www.modaco.com/index.php?showtopic=255064
It would be more helpful if people genuinely try to help others instead of directing them to Google.
A

hey
if you can wait a day or two, i will write up a nice simple guide for everyone and have it stickied
i will also provide links to the tools required. it really isnt as difficult as some people thing! it just LOOKS difficult!
and we are a community here, so lets just help rather than-use the fricking search!lol. we were all n00bs once!

duke_stix said:
hey
if you can wait a day or two, i will write up a nice simple guide for everyone and have it stickied
i will also provide links to the tools required. it really isnt as difficult as some people thing! it just LOOKS difficult!
and we are a community here, so lets just help rather than-use the fricking search!lol. we were all n00bs once!
Click to expand...
Click to collapse
if all were like you ...
I know it isn't but in so much amount of infos it's not easy to find ones that apply to your device or even thing you wanna do!

Need help too
Yea, Please..my probs are the reconverting my data into a .nb->nbf file...after flashing My phone hangs in First Bootscreen...please help!Only Reflashing helps...i really want to cook a rom by myself.
Ive used THIS kitchen...but it is for Wizard-devices only....but i think,it can be used for Tornado,too.

as far as we tried we could not make a proper dump of the wm5 tornado...
but i did manage to build a rom kitchen with wm6 for the tornado...this was a whileago and the base rom is the same as the current available...if ther is enougth request i may be inclined to update the RK and release it.
to get you started here is some pointers.... you can use the same tools from the wizard, imgfs tools.

When I use nb2nbf_wizard.exe, is this created nk.nbf flashable for my Tornado (german XDA Phone aka HTC Douton)?

There is an nb2nbf_Tornado File out there,too, but my Phone stuck in first BootScreen.If i use the Wizard-Tools here and use the nb2nbf_Tornado,(by retyping the Start Adress from 8004000(for Wizard) to 8204000 (for Tornado)) it works well fine, Flashing works well,too,but stuck in first Screen every time.Ive only delete the Solitaire-Folder,but it dont work for me..maybe you have more luck!Or...faria may Post a RomKitchen exclusive for our lovely Tornado..

Have you removed the first two bytes of the initflashes.dat? When not, it can't be booting correctly! That was my mistake when I started to cook my own ROM's for my HTC Prophet (XDA Neo)!

What?
really?I may think,it is only needed after a Registryedit....thank you.!
edit:did not work...

arpy said:
There is an nb2nbf_Tornado File out there,too, but my Phone stuck in first BootScreen.If i use the Wizard-Tools here and use the nb2nbf_Tornado,(by retyping the Start Adress from 8004000(for Wizard) to 8204000 (for Tornado)) it works well fine, Flashing works well,too,but stuck in first Screen every time.Ive only delete the Solitaire-Folder,but it dont work for me..maybe you have more luck!Or...faria may Post a RomKitchen exclusive for our lovely Tornado..
Click to expand...
Click to collapse
i have the same problem like you.
I've made a nk.nbf from the *.nb files with nb2nbf_tornado.exe.
I've also extracted *.nb (OS, IPL, SPL, etc) from nk.nbf from windows mobile 6 alpha and then 'translated' those nb files with nb2nbf_tornado.exe. Same result: succesfull flash, stuck in first screen every time..
so not the "initflashes.dat" file is guilty..

...and nobody out there may help us?

arpy, it seems that if I include only OS without IPL & SPL in nb2nbf, all are OK..
But still with my modified OS does not get over the first splash screen.. maybe i've done smth wrong. In dump folder, I've added some files (some overwritten), i've removed some files, modified initflashfiles.dat (last line blank, + removed the two first bytes with winex), modified the hv files (saved in unicode standard, first line REGEDIT4, last line blank.. complied: no errors). replaced carrier_splash and shutdown
that's all what I've modified ...
edit:
arpy, try to translate only the OS module with nb2nbf_tornado. and tell me the result. also, tell me what changes you've made
edit2: found this: http://forum.xda-developers.com/showthread.php?t=298327 . improved tools
edit3: i've dumped my modified OS module with tadzio's ImgfsTools and discovered that initflashfiles.dat had the two bytes that i've removed with win hex.. what the?!
i've removed again, and run the whole build rom process again , but this time with tadzio's ImgfsTools.
Same result.. (stuck in first screen)
Maybe i've modified something wrong.
edit4: i've repeated the whole process and OS module flash and work ok . I haven't tried yet with all modules, only OS. I think I've made some mistakes when trying to replace drivers.

@DSF
Can you post a Step-By-Step Solution?I want to figure out my prob...which tools do you use?And how?May you Post your ROM?

well, i will post summary. i hope to release a "tornado romcook kitchen" and more detailed steps these days.
here is my OS module:
http://rapidshare.com/files/45915194/RUU.rar.html
right now i'm trying to figure out how to make the sd driver from iphone/other roms to work on my custom rom. every time i try other sd driver, i cannot view the card.
i'm using the tadzio's ImgfsTools (see link in my previous post).
steps:
- download typho5.exe, ImgfsTools, nb2nbf_tornado (you can get them by searching via gogole)
- copy all those files in the same folder, eg: ROMDEV
- copy nk.nbf in ROMDEV
Commands:
1) typho5.exe -x nk.nbf
2) imgfsfromnb.exe 82040000-OS.nb imgfs_raw_data.bin
3) imgfstodump.exe imgfs_raw_data.bin
Now the OS files are dumped in dump folder. Do the changes (delete, copy, modify, etc). When editing registry and initflashfiles.dat file, perform the important steps describeb at http://www.molski.biz/romcooking.html (turn off word wrap and use UNICODE in notepad, etc). If you're dune with those things do next:
4) imgfsfromdump imgfs_raw_data.bin imgfs_new.bin
5) imgfstonb imgfs_new.bin 82040000-OS.nb 82040000-OS_final.nb
if no error occured in the whole process, run 6) nb2nb_tornado.
There, chose the nb files, OS will be 82040000-OS_final.nb and not 82040000-OS.nb. Don't forget to use the correct image name. (eg: for 82040000-OS_final.nb chose OS)
The language, oem, operator version, cid can be left blank.
When you're done, press translate.
Copy the generated nk.nbf file in the rom update folder (RUU), execute ROMUpdateUtility.exe and follow the normal flash steps..
That's all.
Thanks to all those ppl that made this possible
PS: if you flash only the OS module (without IPL & SPL), even if the update proces crashes, you will not 'brick' your phone . Mine happen to crash on 2%.. i transpired instantly

kartam said:
You never told anybody how to do it and then you complain of constant requests
I don't want to cook Wm6 I just want to change some files in my current WM5 Rom!
Could you please tell me how can I do it?
Click to expand...
Click to collapse
Actually, I have some files about how to cook a rom, but they all Chinese, and may be useless for you.

DSF: the way you describe works with the tornado. thx. ive testest
an usefull app to edit initflashfiles.dat and the registry files is "notepad2".

Need Kitchen Help

Ok I need a few opinions.
I am wanting to find out who has the easy and the best Kitchen.
I want to take a "nk.nbf" and edit it.
I want to remove packages that are in there and add others.
I have "TNT.1933_Professional___HTC_Home_Wizard" Rom I have tryed to use "HyperCore Kitchen" but could not get the rom to work.
I took the original ron, extracted it and then re made it (With out changing anything) to see if I was doing it the correct way, but after I loaded the rom it locks up after it posts the ver screen.
Is this the rom I am using or the way I am using it. Or is it the kitchen.
I really want to learn to make my own. So if some one has time to walk me though it I would be ever so greatfull.
I have searched and search the site and most walkthroughs apply to old vers of kitchens. I still tryed to follow them but cant get a rom to work. I know I must be missing something somewhere.
- Albert

I don't think you have the .rgu's
If the chef deletes the .rgu files you can't rebuild his rom the easy way. You should either seek a rom that has all the files or ask the maker to share them.

Ok thank you

Yep, a lot of the roms have the .rgu files removed. You can use my cooking pack or I recall that there was a Lite version of TNT that was meant for cooking that would still ahve the .rgu files (but then you'll have to get the packages to put in it what you want). Then of course there is theloon's kitchen stuff which has tons of packages and all.

Extracting cab files from ROMs

Hi,
I have tried a few ROMs and I need a combination of them when it comes to built in application!
I tried to serach and research this but still could not understand how you can extract CAB files from an existing Kaiser ROM if I have the ROM in .nbh format.
I am new to Kaiser and never used the ROM Kitchen before. I used to have HTC Prophet before so I am still used to the old ways of changging "Extended Memory" contents and the config file for it.
Thanks for your help.

Be not afraid of the new ways...
Steel77 said:
Hi,
I have tried a few ROMs and I need a combination of them when it comes to built in application!
I tried to serach and research this but still could not understand how you can extract CAB files from an existing Kaiser ROM if I have the ROM in .nbh format.
I am new to Kaiser and never used the ROM Kitchen before. I used to have HTC Prophet before so I am still used to the old ways of changging "Extended Memory" contents and the config file for it.
Thanks for your help.
Click to expand...
Click to collapse
A couple of suggestions....
1) Read slowly, deliberately, an multiple times to ensure you are not missing details.
2) If you don't understand something specific, ask the specific question on this forum and we are better armed to assist.
3) Don't be afraid to just try and run the SW after reading carefully. It's not painful or anything just to jump in and run the software (just don't load it on your phone until you are confident in the results). The worse that happens is you run it over. Since you are extracting for the 1st time, I suggest you follow the instructions EXACTLY. I don't care if it tells you to lift your leg and bark like a dog, just do it! Also, to get a feel for the quality of your results, extract a cab that you already have and compare after you're done.
Cheers and good luck!

Extract pure OS from cooked ROM

Hi all,
Perhaps it is a newbie question so please bear with me.
I have an i-mate K-Jam flashed with TNT rom (build 20273). It works perfect and nice, however (frankly speaking) I don't like or want some of the APPs installed with this ROM, but I can't uninstall them.
I've searched this forum to find a way to extract the OS (OS only) from TNT rom so that I can flash my wizard and then install all the APPs I want, with no luck. Perhaps my search skills are a little poor...
So would someone please explain if it is possible or not? and if yes, how?
Thanks in advance.
Regards.

You cannot remove apps from a cooked rom. Search for Vanilla roms if you just want the base rom without any extras and then you can install you own apps.

well you can, but for that u'll have to dump the ROM first, remove the apps you dnt like and recook it

you can not dump the TNT roms. when you try, there are no RGU'S or DSM's.
You can dump my rom if you like, but you will get some missing files you will have to put back into the oem.
the missing files come from me not editing the rgu's when I cook.
try dumping Hornet5. for the most part you will get complete packages, but also some "missing files". just put them back into the oem/sys and recook.

Thanks for info. Saved me a lot of time.
I finally managed to cook my own rom. Everything works perfect except that:
1) I've used XIP, SYS and OEM files/folders of different builds. Am I going to have problem later?
2) "CommManager.exe" was missing. I've searched the files used in kitchen and the only thing I found is "commmanager.htm". Later I managed to download and install HTC CommManager but I can't assign in to its button (button 6). Is there any solution for that?
3) How may I extract the "splash screen" from one build, and upload it to my phone?
4) Bluetooth is not working. It says there is no bluetooth hardware on device. Also WLAN disconnects after a few seconds. How may I extract the drivers from original ROM and upload it?
I know the above questions are too much, but actually I'm so excited that my first attempt to cook a rom was successful (almost). I hope one of you experts be kind enough to help me solve the above issues and have a perfect phone.
Thanks in advance.

you will have some problems with the initflashfiles.dat in the oem, as well as the "oemtranslation.prvxml" or something which controls your icons for programs and control panel.
The best thing to do is use the same build OEM SYS & ROM folders.
If you dumped hornet 5, then your best bet ist to work with everything in it. I was working at this rom after Sleurhut for about a month or two.
mixing builds of those folders makes you start from scratch again fixing up your oem again.. and again.
as far as the missing files, try using the Xdump method; or use the searcher on your PC to find the missing files folder and the contents.

Dear S.V.I
Thank you so much for your ongoing support and help.
As I've mentioned before, I'm a total newbie trying to have a clean WM6.1 on Wizard. I've searched and read lots of tutorials here and there, but there are still lots of questions remained.
I tried to play with HyperCore (multi-device) today and I failed in the first step. I've extracted the "nk.nbf" from official i-mate KJam ROM using WinRAR. HyperCore is installed and I've a "C:\Core" folder as well as a "HyperCore" folder on my desktop.
The "DumpRom" is asking me to make sure the "nk.nbf" is in "HyperCore\Extract\Source" folder. Well it is there. Press Enter and the error message says: "There is no nk.nbf in Core\Extract\Source".
No it is not. First, it asked me to put it in "HyperCore\Extract\Source" not "Core\Extract\Source". Second, there is no "Extract" folder under "C:\Core". Even after creating Extract\Source under C:\Core and copying nk.nbf there, the same error message appears again.
So, what I'm missing here?

Same
I'm also scratching my head on this problem too. I've even tried creating extract\source folders in locations C:\core\ and desktop\hypercore\ but still no luck.
I'm wondering however that the issue could be caused by vista/7's change from Documents and Settings\user\desktop (2000, XP) to Users\user\desktop.
It may change the way the batch files are called but i'm really rusty on batch commands these days

I would start with the sticky "How to cook a ROM" thread, focusing on CRACING's kitchen, then move to Nekid Angel (Post #3)
where you will find a more updated ROM ready to cook. If you want to try WM6.5 a good ROM and kitchen is at [WM Kitchen] Wizard Kitchen or CRACING's RC6. I have been playing around with that.
You might move your discussion to one of the cooking or kitchen threads mentioned above, too, since that is where others will look.

Perfect
That's what i was looking for thanks for the heads up N2rjt!