Database Info

Qmail questions: lock and html rendering

I am trying out qmail for a variety of reasons.
One thing I am finding frustrating is that qmail issues a lock in the folder where mail is stored. If I soft reset, the lock persists because I have the mail stored on the miniSD card, but this means I get the question "WM_user has locked the file, do you want to continue?" Answering yes clears it but since I want the program to run automatically at start up, I would like to eliminate the query. Is there a way to prevent the locking or, if not, to prevent the question?
Second, I went to the trouble to install a bunch of RSS feeds, none of which render properly. The nature of the problem is that html commands aren't being rendered, even with "html mode" checked. I tried a bunch of different settings (quote mode, raw mode, etc.) but none of them led to proper rendering. Clearly others using the program aren't having this trouble; can you point me in the direction that would let me see these feeds? I like the idea of a single program doing mail and RSS, all from the SD card.

I've been using qmail for a while now, and I've found the locked file problem is caused when qmail is running and your PPC is turned off. qmail doesn't seem to handle this very well, but if you shut qmail down before turning your PPC off you don't get the locked file issue.
As to the rendering html rss feeds, I've found this happens only when you are online and try and view the feed. If you are offline you just get a blank page, but if you turn the html view off you get the raw view of the feed.
Not a perfect program, but a whole lot better than the built in one.
Cheers
Mark

Automate deletion?
Azol (http://www.azol.ru/texts/QMail3_eng_FAQ.htm) has a means of automating the checking of mail, and of semi-automatically deleting messages from the server when they are deleted from Inbox. I would like to automate this process -- adding a command to apply the rules using autopilot. Does anyone know how to do this?
Also, has anyone figured out how to put the number new messages Qmail has found on the Today screen? That isn't so important to me -- I'm planning on using Qmail for travel rather than as my regular service -- but it would help make it a complete replacement.
Finally, Qmail doesn't work one-handed very well; it would be nice if some of the Dpad keys did useful things.

prestonmcafee said:
but since I want the program to run automatically at start up, I would like to eliminate the query
Click to expand...
Click to collapse
You may want to use for example nScriptm to start Qmail: instead of just starting Qmail via a lnk file, just delete the lock file from a nScriptm script and, then, Shell () Qmail. Please see for example my latest screenshot-related article for more info on nScriptm.

Or Skschema
Thanks. I figured out how to do this with skschema, as in order to run qmail automatically from the minisd card, I need to delay launching; programs in Windows/Startup start up before the miniSD is available (I even tried a faster card to see if this would fix it, but it didn't) and hence don't start and generate errors. I use skschema to start qmail, and also to start phmtraylaunch since the icons from the minisd card aren't available, either, at the time it starts.

Re: Or Skschema
prestonmcafee said:
Thanks. I figured out how to do this with skschema, as in order to run qmail automatically from the minisd card, I need to delay launching; programs in Windows/Startup start up before the miniSD is available (I even tried a faster card to see if this would fix it, but it didn't) and hence don't start and generate errors. I use skschema to start qmail, and also to start phmtraylaunch since the icons from the minisd card aren't available, either, at the time it starts.
Click to expand...
Click to collapse
Yup, SKSchema / nScriptm is also a great tool to do this. With earlier PMRecorder versions, I did need to use it (see for example http://www.pocketpcmag.com/blogs/index.php?blog=3&p=513&c=1&page=1&more=1&tb=1&pb=1 if interested) to avoid the \Storage Card2 problem

Qmail is perfect for me, with one exception. When I hit reply, the original message fills the page. I just want a clean screen to type my reply, and I don't want to include the original. This program does practically everything but this. Any ideas?
Thanks

demps said:
Qmail is perfect for me, with one exception. When I hit reply, the original message fills the page. I just want a clean screen to type my reply, and I don't want to include the original. This program does practically everything but this. Any ideas?
Thanks
Click to expand...
Click to collapse
This can indeed not be got rid of.
You can, however, just tap and hold the screen, choose Select All and, then, just click Delete on the Keyboard SIP to get rid of eveyrthing.

Thanks, I was afraid that was the only solution.

qmail questions
I'm having a huge problem sending email with qmail. One thing that would help is if I understood all the settings in the program, which are different from anything else I have ever seen, probably due to it being translated from Japanese.In tool/account/general, I understand that host information refers to the incoming and outgoing servers, but what is to be put in "user information". Is "address" an email address? "User" tab seems simple enough, as I use authentication and just enter the same in "outgoing" as in "incoming". "Detail" is simple enough. "Pop3" as well, though I don't know what apop is. "SMTP" tab; what do I do here? I don't think I am using a local host. "Dialup" is ok. In "advanced" I read on this forum that my email address should go in "identity". Is this right? If so, would this be the address of the account I receive email with or of the account I send with(if they were different)? I have a comcast account on cingular service. The messaging program can receive and send email using mail.comcast.net and smtp.comcast.net with authentication and no ssl, but qmail can't. Two months ago it could, but now it cannot. Now I"m going to try using a hotpop account to send, but I'm not real confident this will work, since I'm not sure h ow to configure qmail. Any help would be apprecited, Meinnesyss or anyone else.

demps said:
be put in "user information". Is "address" an email address?
Click to expand...
Click to collapse
Here, you only need to enter the info that will be displayed as a sender name / address. In most cases, you can enter here anything.
demps said:
"Pop3" as well, though I don't know what apop is.
Click to expand...
Click to collapse
In most cases, you won't need this.
demps said:
"SMTP" tab; what do I do here? I don't think I am using a local host.
Click to expand...
Click to collapse
Wrong. You must enter smtp.comcast.net in here.

SMTP error. (0x00030500) Error occured while MAIL command. Receive an error response. 501 expected [email protected] - <"">
General: outgoing= smtp.comcast.net
SMTP: local host= smtp.comcast.net
advanced: identity= my email address
Thanks

I need a few fuze fixes

I have tried to look through but there are alot of posts and don't know how exactly to look this up but I need to know how to fix something with my internet. I have yahoo mail and don't use the xpressmail with at&t. I try to go to my normal mail.yahoo.com and it goes to the mobile version. I hate mobile versions of the websites. The yahoo version won't let you do anything other than text. No attachments or anything.
I need to just view full webpages. How do I change the settings to view them only? (saw something on at&t website but don't understand it and some people said it didn't work)
Second, I need to know how to allow for just the swirl zoom and not the tap zoom. When I open and it goes to landscape it gets rid of the swirl zoom on the internet and will only use the tap way to zoom. I don't like that way. I prefer the zoom by the d pad.
Third, If I am looking at playing alot of video and going to start getting some games on my fuze and wanted to know if I should change my display settings to something else that will make it look better. I remember on my last one(yes I had to replace one) somehow I got to display settings and they had options to change to xvga, vga, etc. Isn't Vga the best or is it set at the best as the default. Granted it looks good the way it is but I want the best for when I start doing video. And how do I get to it? I was looking around for it and can't find it anywhere now.
Also I was looking on what gps program to get. I was looking at the tomtom and was wondering what people thought of it. And what version would I need to get? Would you recommend a different one like garmin?
Sorry if these are double posts.

70 views and no answers and already to the 3rd page. Can anyone help me on this? No one on the at&t have replied and no one has here either.
Please help me, I'm having issues and need them fixed right away.

DaPitt84 said:
I have tried to look through but there are alot of posts and don't know how exactly to look this up but I need to know how to fix something with my internet. I have yahoo mail and don't use the xpressmail with at&t. I try to go to my normal mail.yahoo.com and it goes to the mobile version. I hate mobile versions of the websites. The yahoo version won't let you do anything other than text. No attachments or anything.
I need to just view full webpages. How do I change the settings to view them only? (saw something on at&t website but don't understand it and some people said it didn't work)
Second, I need to know how to allow for just the swirl zoom and not the tap zoom. When I open and it goes to landscape it gets rid of the swirl zoom on the internet and will only use the tap way to zoom. I don't like that way. I prefer the zoom by the d pad.
Third, If I am looking at playing alot of video and going to start getting some games on my fuze and wanted to know if I should change my display settings to something else that will make it look better. I remember on my last one(yes I had to replace one) somehow I got to display settings and they had options to change to xvga, vga, etc. Isn't Vga the best or is it set at the best as the default. Granted it looks good the way it is but I want the best for when I start doing video. And how do I get to it? I was looking around for it and can't find it anywhere now.
Also I was looking on what gps program to get. I was looking at the tomtom and was wondering what people thought of it. And what version would I need to get? Would you recommend a different one like garmin?
Sorry if these are double posts.
Click to expand...
Click to collapse
1) i don't think you'll be able to view it. It's the same with gmail, that's why they provide mobile version of gmail as well.
2) it shouldn't do that. what rom are you using?
3) the default setting should be optimal. i'm not sure why you'd want to play with the video setting. (i could be totally wrong on this one)
4) do a search on the forum, i'm sure garmin vs tomtom has been discussed in other threads. if you can find the # of people who have viewed this post, i'm sure you know your way around searching on the internet. good luck

DaPitt84 said:
I have tried to look through but there are alot of posts and don't know how exactly to look this up but I need to know how to fix something with my internet. I have yahoo mail and don't use the xpressmail with at&t. I try to go to my normal mail.yahoo.com and it goes to the mobile version. I hate mobile versions of the websites. The yahoo version won't let you do anything other than text. No attachments or anything.
I need to just view full webpages. How do I change the settings to view them only? (saw something on at&t website but don't understand it and some people said it didn't work)
Second, I need to know how to allow for just the swirl zoom and not the tap zoom. When I open and it goes to landscape it gets rid of the swirl zoom on the internet and will only use the tap way to zoom. I don't like that way. I prefer the zoom by the d pad.
Third, If I am looking at playing alot of video and going to start getting some games on my fuze and wanted to know if I should change my display settings to something else that will make it look better. I remember on my last one(yes I had to replace one) somehow I got to display settings and they had options to change to xvga, vga, etc. Isn't Vga the best or is it set at the best as the default. Granted it looks good the way it is but I want the best for when I start doing video. And how do I get to it? I was looking around for it and can't find it anywhere now.
Also I was looking on what gps program to get. I was looking at the tomtom and was wondering what people thought of it. And what version would I need to get? Would you recommend a different one like garmin?
Click to expand...
Click to collapse
1. Go to the Opera configuration page (replace "http://<whatever>" with "opera:config" -- without the quotes). Scroll down to "Proxy" and open that section by clicking on it. Make sure that the entries for "HTTP Server" and "HTTPS server" are empty and hit "Save" at the bottom of the section. Then scroll down to "User Agent," open that, set "Spoof UserAgent ID" to 3, and hit "Save." Finally, scroll down to "User Prefs," open it, set "Custom User-Agent" to "Mozilla/4.0(compatible; MSIE 6.0; Windows NT 6.0; en)" (again, without the quotes), and save it. That may be overkill; someone posted, for instance, that you get the same results by simply deleting the Custom User-Agent string instead of setting it to the value above. I haven't tried that. All I can say is that this combination of settings shows me the full web pages for all the sites I normally visit. YMMV.
2. No clue.
3. The display on the Fuze is 640x480 pixels, otherwise known as VGA resolution. A video encoded for VGA resolution will have the maximum sharpness of which the Fuze is capable. It may not be the best viewing experience, though, depending on what you are using on the Fuze to play the video and how it was encoded (the codec used, frame rate, etc.) -- you may experience performance problems such as "tearing," dropped frames, stuttering, etc. There's a lot of discussion currently about what's the best encoding for the Fuze, better drivers, the best player and settings therefor, etc. It's not a settled question nor an exact science. (I don't know what you mean by "How do I get to it?")
4. I use a free over-the-air turn-by-turn navigation service from amazegps.com. I think it does an excellent job for my needs. If you want to buy one, though, you should definitely consider OnCourse Navigator 8 (OCN8). I haven't used it, but the reviews I've seen are very enthusiastic.

baboola said:
1) i don't think you'll be able to view it. It's the same with gmail, that's why they provide mobile version of gmail as well.
Click to expand...
Click to collapse
I don't use Yahoo mail, but I see the normal HTML view of Gmail -- not the mobile version -- in Opera, using the settings I gave in the preceding message.

Try accessing your email from The Skyfire browser until someone outlines a full fox for you..

You can try using messaging/pocket outlook
You can also add Yahoo! Mail to messaging/pocket outlook, I have 4 accounts set up in pocket outlook/messaging GMail, Hotmail, Yahoo! Mail and my works exchange mail. I would suggest setting these up with imap settings over pop3 settings.
GMail has instructions for this pretty much step my step. Yahoo! doesn't officially support imap on wm devices but i am using an imap server settings. Its a little tricky to get set up because WM likes to grab settings for pop3 first. You can by pass this by putting in a different domain [email protected], [email protected] and then proceed to manually set up the accounts. If you have OCD then you can fix the email address after you have finished setting it up in pocket outlook/messaging.
GMail
incoming mail server (imap)
imap.gmail.com
user name is your full email address.
outgoing mail server
smtp.gmail.com
check box outgoing server requires authentication
check box use same user name and password
Advanced settings(link on page where you put in outgoing mail server info)
check box require ssl for incoming
check box require ssl for outgoing
Yahoo!
incoming mail server (imap)
imap.next.mail.yahoo.com (it works!)
user name is your yahoo login name (ex abc)
outgoing mail server
smtp.mail.yahoo.com
check box outgoing server requires authentication
check box use same user name and password
Advanced settings(link on page where you put in outgoing mail server info)
check box require ssl for incoming
check box require ssl for outgoing
For Hotmail to work you have to install a cab (for stock Fuze rom)otherwise it will direct you to a web based version.
Setting the accounts up in messaging will also allow you to preview messages in the TF3d email tab.

wmm said:
1. Go to the Opera configuration page (replace "http://<whatever>" with "opera:config" -- without the quotes). Scroll down to "Proxy" and open that section by clicking on it. Make sure that the entries for "HTTP Server" and "HTTPS server" are empty and hit "Save" at the bottom of the section. Then scroll down to "User Agent," open that, set "Spoof UserAgent ID" to 3, and hit "Save." Finally, scroll down to "User Prefs," open it, set "Custom User-Agent" to "Mozilla/4.0(compatible; MSIE 6.0; Windows NT 6.0; en)" (again, without the quotes), and save it. That may be overkill; someone posted, for instance, that you get the same results by simply deleting the Custom User-Agent string instead of setting it to the value above. I haven't tried that. All I can say is that this combination of settings shows me the full web pages for all the sites I normally visit. YMMV.
Click to expand...
Click to collapse
I tried this and it still comes up on opera as the mobile version. So Wish I knew how to fix this. Now media net isn't my homepage. And media net won't even show up. Still need a fix then. I may have to just use xpressmail if I can't find a fix.
Can anyone tell me what the default settings are so I can go back to the way it was. Until there is a fix that works.

DaPitt84 said:
I tried this and it still comes up on opera as the mobile version. So Wish I knew how to fix this. Now media net isn't my homepage. And media net won't even show up.
Click to expand...
Click to collapse
Sorry; it's been a couple of weeks since I did this so I had forgotten that it disabled MEdia net. (Personally I couldn't care less about MEdia net, so it was no loss at all for me to exchange that for seeing full web sites; that's why I forgot about it.) I don't know why your web site still comes up as the mobile version; as I said, this does the trick for all the sites I use.

well, Is there any way to get the settings back, cause it didn't fix the issue and want to go back then. I want to keep medianet. i may have to do express mail after all, since no one knows how to fix it for atleast yahoo mail.

I've just spent a few minutes searching through the forum and can't find the post that I remember where someone gave the original settings for those configuration items; maybe it was on some other board. In any event, the best I can suggest is that if no one tells you what the original settings were, you can make a backup using Sprite backup; hard reset the device; go to opera:config and write down the original settings; restore the backup; and then change the settings to what you wrote down from the fresh boot.

I found the post I was thinking of over on the AT&T forum. That only addresses the proxy server names, but I think that may be all you need to get back to MEdia Net. HTH.

Than fixed it but wish I could figure out what is the problem with yahoo mail and how to fix the whole mobile website thing.

I had the same issue with the zoom wheel. Not sure if this is what fixed it but, in Opera goto Settings - Dispaly. Check Auto Full Screen, Show Images & Block Pop-ups. Uncheck Mobile view.
Has been working correctly since.

Phaze13 said:
I had the same issue with the zoom wheel. Not sure if this is what fixed it but, in Opera goto Settings - Dispaly. Check Auto Full Screen, Show Images & Block Pop-ups. Uncheck Mobile view.
Has been working correctly since.
Click to expand...
Click to collapse
Ok. How do I get there? I know the whole go into opera and go to opera:config but how do I get to the display like you did then? Everything that has anything about the display in the config is different. Thanks

DaPitt84 said:
Ok. How do I get there? I know the whole go into opera and go to opera:config but how do I get to the display like you did then? Everything that has anything about the display in the config is different. Thanks
Click to expand...
Click to collapse
This is in the "Settings" choice on the menu you get when you hit the button at the lower right of the screen and then hit the "menu" icon (the one furthest to the right at the bottom of the screen).

I just tried that too.The menu-display. the mobile view isn't checked and I still get the mobile view of the darn yahoo mail. Still don't know how to fix it and I believe paypal is the same.

Yeah, the "mobile display" option controls how Opera sizes and formats pages; it doesn't affect which page (mobile or regular) is being accessed. I don't know how Yahoo mail, etc., are detecting the Fuze as a mobile device; the user agent and proxy fixes take care of many/most pages, but there's obviously something else.

jamorgan2008 said:
Yahoo!
incoming mail server (imap)
imap.next.mail.yahoo.com (it works!)
user name is your yahoo login name (ex abc)
outgoing mail server
smtp.mail.yahoo.com
check box outgoing server requires authentication
check box use same user name and password
Advanced settings(link on page where you put in outgoing mail server info)
check box require ssl for incoming
check box require ssl for outgoing
Click to expand...
Click to collapse
Hey, thanks!
I just set up my yahoo a/c!!

jamorgan2008 said:
You can also add Yahoo! Mail to messaging/pocket outlook, I have 4 accounts set up in pocket outlook/messaging GMail, Hotmail, Yahoo! Mail and my works exchange mail. I would suggest setting these up with imap settings over pop3 settings.
... Yahoo! doesn't officially support imap on wm devices but i am using an imap server settings. Its a little tricky to get set up because WM likes to grab settings for pop3 first. You can by pass this by putting in a different domain [email protected], [email protected] and then proceed to manually set up the accounts. If you have OCD then you can fix the email address after you have finished setting it up in pocket outlook/messaging.
...
Yahoo!
incoming mail server (imap)
imap.next.mail.yahoo.com (it works!)
user name is your yahoo login name (ex abc)
outgoing mail server
smtp.mail.yahoo.com
check box outgoing server requires authentication
check box use same user name and password
Advanced settings(link on page where you put in outgoing mail server info)
check box require ssl for incoming
check box require ssl for outgoing
Click to expand...
Click to collapse
Is this dns legit (imap.next.mail.yahoo.com). it seems like a phishing url.

Windows Mobile 6.5 Imap Folders

I was doing some googling and this is as good a place as any to find users who have a clue.. so Im wondering if anyone has had this problem or a workaround.
I have a SE X1 (winmo 6.1) I configured my imap mail perfectly, but the only folders my device download from is the Inbox. I have other folders that I use to sort mail into (via mail rules on my desktop).. which are not downloading mail at all. I can see them listed, but they all show empty.
I was hoping this would be fixed in winmo 6.5, so I upgraded my X1 to 6.5 and the problem still exists. Has anyone else managed a workaround to synce other folders.. to clarify in the diagram below .. is an example of my structure .. in the example I am not getting mail in my client 1 or client 2 folder
Imap - Inbox
- Sent
- Client 1
- Client 2
- etc...
I hope that makes sense

Hi
I've got the same problem. If anyone has an answer...
Furthermore, the folders of my pocket outlook, like "sent messages" are created in my web mail account (like yahoo), because the name of theses folders (sent, trash...) are not the same.

UP!
I also have the same issue...
May be somebody can give an alternative?

Sync other folder
You can sync any folder you wish by selecting it as a managed folder. To do so follow these steps.
1. Open your mail box.
2. Click the options button and select Tools
3. Select Managed folders
4. Select each folder you wish to sync then click ok
The next time you send and receive mail the folder will be synchronized.
I had this same problem and just recently discovered this solution. In my case I would send a message from my Yahoo email account and although it would tell me it was sent, I would have no verification after the fact. It was not listed on my device in the sent folder nor was it listed via the website in the sent folder. I had to send a test to another one of my email accounts to verify the send funciton was actually working.
PLEASE NOTE: You should make sure your sent folder is fairly clean before syncing. I did not clean it first and it had to sync over 300 messages from that one folder.

I have tried this, but it appears that only allows the sync via activesync and not via the normal internet connection (ie when you are not connected to your pc) .. am I missing something ?

ljhedrick said:
You can sync any folder you wish by selecting it as a managed folder. To do so follow these steps.
1. Open your mail box.
2. Click the options button and select Tools
3. Select Managed folders
4. Select each folder you wish to sync then click ok
Click to expand...
Click to collapse
This is the way to do it on Win MO 6.1 - I have this set up on Blackstone.
Unfortunately on HD2 (6.5) I can not find Tools and manage folders choice.
Anybody knows where it is hidden?
FOUND IT!
Before someone else spends hours looking - Disable Sense, go to win standard GUI - all settings are there. Same thing with repeat sound in alarm.... GUI is hiding settings!!!!
Why HTC thinks they know what I want to see and adjust?
Often I do not want it the way I want it!!!!

zift said:
FOUND IT!
Before someone else spends hours looking - Disable Sense, go to win standard GUI - all settings are there. Same thing with repeat sound in alarm.... GUI is hiding settings!!!! Why HTC thinks they know what I want to see and adjust?
Often I do not want it the way I want it!!!!
Click to expand...
Click to collapse
I think you'll find that the option is there, it's just not immediately obvious that one needs to scroll down.
From your home tab, do the following:
Email tab
Inbox (left soft key)
Menu
At this stage it APPEARS that 'Go to >' is the last menu item. It actually isn't. If you scroll down you will reveal 'Tools' 'Select Messages' and 'Send via Bluetooth' .
'Manage folders' is in the 'Tools' sub menu.
No need to disable Sense.

jet_leeroy said:
I have tried this, but it appears that only allows the sync via activesync and not via the normal internet connection (ie when you are not connected to your pc) .. am I missing something ?
Click to expand...
Click to collapse
You sure? For me it worked this way (same problem). I've not even activated email-syncing via ActiveSync.
thans a lot, ljhedrick!!

Hello! Thanks for the help ljhedrick and Franwella (could not find those tabs)

Franwella said:
I think you'll find that the option is there, it's just not immediately obvious that one needs to scroll down.
From your home tab, do the following:
Email tab
Inbox (left soft key)
Menu
At this stage it APPEARS that 'Go to >' is the last menu item. It actually isn't. If you scroll down you will reveal 'Tools' 'Select Messages' and 'Send via Bluetooth' .
'Manage folders' is in the 'Tools' sub menu.
No need to disable Sense.
Click to expand...
Click to collapse
Hi Franwella. Excellent tip. I could not spot the tools option and you led me straight to it and now I have managed to sync IMAP sub folders with my Gmail account. Brilliant ! Thanks.

Cannot download messages from server over IMAP
Hello,
I would like to ask you for some help because I cannot find a solution to my problem and I really appreciate your expertise.
So, here is the problem:
Facts.
I have 2 email accounts:
- the main business account running on a IceWarp Merak 9.x server
- a personal account running on Gmail server.
Problem.
If I receive on both addresses (servers) the same html e-mail witch contains formatted text and pictures, then using the native e-mail messaging client of my Windows Mobile 6.5 HTC smartphone, here is what I get:
- on the main business account the message cannot be seen. What I see from the message is only BODY.PEEK[2]
- on the Gmail account I can see the full message, exactly as I can see it on my desktop.
I played with all the settings from „Message download limit” and „Download attachments„ for the main business account, in order to get it working. Here is what I found:
- any settings for „Download attachments„ does not change the behavior, the result is the same (BODY.PEEK[2])
- for „Message download limit” if I choose „Headers only”, download headers and then mark the message for download it is working. But this means that I should connect twice – more bandwidth and more time spent until get the messages. If I choose any other option except the above mentioned, I get the bad result BODY.PEEK[2]...
This problem is very annoying because I cannot read my business mails if I'm out of the office.
What do you think?
It is a server problem (IceWarp Merak 9.x)?
Or the native messaging client from Windows Mobile 6.5?
Can you help me to solve this problem?
Looking forward for your reply,
Best regards,
Stefan

[Q] My Queries

Guys,
Got my phone a couple of days before ... no case yet ... hopefully the S case will be here tomorrow.
Have been playing with it most of the time since I got it and now have compiled a list of queries. Am sure the geeks out here will be able to help
a) Setup the VOIP ,,, no probs, works great. The problem is that well, every time I press call, I've got to choose between cell phone call and internet call. I live in Kuwait where all local calls are basically free or really cheap. I would like the popup to appear when it is an international call only. If that's not possible is there a way to switch it off (as I normally make local calls) and then have an easy way to switch the voip on?
b) I downloaded skype from one of these forums ... could not get it in the market. The problem I have with skype and one other program is that it has no "exit" option. Its on and running all the time even when I am done using it. Any way to have an option to exit? Is it only possible to use something like a tasker or something and force it to close/ end service?
c) I have my bookmarks at home/office in Google Chrome. I seriously thought since both Android and Chrome are Google products (just as Gmail) the bookmarks in my Google Chrome would have synced with my android browser just as Gmail dumped my contacts on to the phone (which by the way I did not want to happen). Is there some way I can get my chrome bookmarks show up in my browser?
More queries will follow once I play a lil more. Thanks for help received from various nice guys here while I was in the process of getting the NS and then splitting my head on which case to get.
Cheers

Can someone please help me??
I have managed to find out that we can exit Skype. I however use a program called "Stock India" and can find no way out.
Would appreciate help with the rest of those queries too.
Thanks

bump ... sorry

I'd help you if I could.
Normally I try to avoid non-answers like this, but I was starting to feel bad for you getting no replies. >.>

Alright, I just downloaded skype to see if I can answer your questions.
1. No clue. I don't use the voip feature. I looked under call settings and it has the options for when to use internet calling. Maybe that's it?
2. You can sign out when you're in the "My Info" tab. If you want to end the app then you got to do that manually or with tasker.
3. I'm asking myself the same question. There aren't any apps that make it easier either. I think there are apps that sync with google bookmarks, but that's totally different from chrome bookmarks.
Hope I helped you somewhat.

Not sure if these'll help you any but....
a. I've only messed around with the VOIP stuff for a couple of days, but there is an option in Settings->Call Settings->Internet Call Settings to let the phone know when you want to use it. Sounds like yours is set to ask for each call. Mine is set to 'For Internet Calls Only'. Try that.
b. Android - and Gingerbread in particular - is very good about managing memory and running apps. That said, if you really want to kill the skype process, look into downloading one of the many available task managers on the market. I can't suggest a good one for you, as I don't use one. Many people actually recommend against using one.
c. I wish. ;-) What I have found, though, and it's not a very good solution, is to use a different browser. I've been looking at Firefox for Android and it's actually pretty good. It also includes the ability to sync your desktop bookmarks to your mobile, which might make it worth the change for you.

Hey Zorak, not to worry ... guess I've got used to no replies Maybe the question was dumb and should have been found with a search (I normally search first) or maybe the guys genuinely don't know (in which case there is no point in blaming anyone).
Regards setting voip to "internet calls only", I did try that option. The result is that no calls are recognized as internet calls unless you copy and paste the number into a new field called "Internet Call" by editing the contact. Here, I've got a problem ... I use exchange for my contacts and if you use exchange, there is no option to add "Internet Call".
To test, I enabled my Gmail contacts and was able to enter the "Internet Call" and noticed that in gmail, the contact gets modified, the category being "Other:" followed by "sip:+9659935xxx". I copied pasted "sip:+9659935xxx" into one of the regular fields in exchange, but it does not work. The only option therefore seems to edit my entire Gmail contacts.
@DKYang & knytphal Yes, the now know that we can logout of skype ... thanks
Regarding android bookmarks, I found this solution ... guess there is nothing to worry about security. From whichever browser you use, 1) export the bookmarks to a html file.
2) Upload the html file to Rerware.
3) Install MyBookmarks from Appbrain
4) This software lets you overwrite your Android bookmarks with the one uploaded to the Rerware site.
This should help ... just not sure if after this is done if these new bookmarks would get saved on to our gmail or wherever in case we factory reset or change mobiles.

Synchronize call log with Outlook Journal

Hi all,
I have searched for this application for a long time and tried whole bunch of them, but I am still looking for SOLID, SIMPLE, and STRAIGHTFORWARD application to save Call log entries into Outlook Journal.
My setup:
Windows 7 32-bit
Outlook 2007 SP2
HD2 with latest T-Mo ROM and Cookie Home Tab installed.
Applications I tried:
Maniac's SmartJournal - so far the best solution and worked flawlessly on the XP. Since I switched to Windows 7 it shows that the SmartJournal reads from the device, the notification disappears and nothing happens. Maniac's website is down, so I cannot find out what is going on.
Pocket Informant Outlook Extension - since it is now free as Informant stopped supporting Windows Mobile, I tried it, it seems that it works and does some synchronizing according to the log, but no entry shows up the Journal.
Jeyo Outlook Extension - they used to support Outlook Journal in their version for Symbian, but in their Windows Mobile they only synchronize SMS.
MobiTNT - I tried that software as well, but I am not able to enable the software on the computer.
I know that there is also some app for syncing call log into calendar but it seems way too akward.
I know that there are many threads about this all over the Xda, but they seem to be old for one and do not end up with comprehensive solution afterall.
I would like to this post to become comprehensive and one stop solution for somebody who is looking for the solution like me.
Any ideas are welcome.

Nobody? Really? Really?

I Feel your pain
I used to use Calls to Journal from Chapura with my windows handheld. Strangely it is now discontinued.
It was slick, and perfect. Dumped all calls to Outlook journal and tagged the outlook contacts (so that they showed up in activites). Was perfect in my business when someone denied that you called them.
I can't find anything that compares. Not even close. The other ones like "missing sync" try to do too much and do not include this very simple functionality.
Have you had any luck?

Well, I finally managed to make the Maniac's Smartjournal work and it works great. It transfers the calls into Journal and tags for the known Contacts so it shows in Activities.
If you would like to try it, I have the .exe files since the website is no longer active. The files are really small and the program is no memory hog by any means. I tried Jeyo and it just crashes Outlook.
Let me know.

Another one
I wish i could be more helpful but there is one applicatoin which i have used in the past but have since forgotten the name whichvery simply adds an appointment into outlook which lasts for the duration of the call, with the title of whoever the conversation was with.
this might be the one i was thinking of. I'm gonna check it now.

kolibrik said:
Well, I finally managed to make the Maniac's Smartjournal work and it works great. It transfers the calls into Journal and tags for the known Contacts so it shows in Activities.
If you would like to try it, I have the .exe files since the website is no longer active. The files are really small and the program is no memory hog by any means. I tried Jeyo and it just crashes Outlook.
Let me know.
Click to expand...
Click to collapse
post the files please & details you have on them & any special instructions on getting it working.
One of the biggest mistakes MS made was not having WM & its PC software linking together with complete harmony & user control.
Really are a clueless bunch at redmond HQ ...

I am attaching the rar file. There are two files. One is SmartJournal.exe and the other is SmartJournal Beta.exe Try first the SmartJournal.exe run as admin and compatibility with XP SP2. Sometimes it shows the error that the CallLog.csv cannot be dumped. If that is the case, uninstall the SmartJournal and install the Beta (again as administrator and compatibility mode XP SP2). Maniac had a great forum unfortunatelly that website is no longer active.
Let me know if you have any trouble.

Take 2
I just realised my previous post was totally useless since I never included the link. I've been using Call Calendar for the past few days which works really well, recording the time, duration, who the call was with and who called who silently into outlook, which will then obviously sync over activesync or exchange. you can get it here:
http://www.freewarepocketpc.net/ppc-download-call-calendar.html
then again while searching for that link i found this program, Phonelog- it's newer and seems to have additional features like recording incoming SMS. I think you can customise what is recorded too, it might be worth a shot:
http://www.freewarepocketpc.net/ppc-download-phonelog.html
I've never used Outlook journal, so I don't know how much functionality you lose as a result of these being purely appointments. Hope it oculd be useful though.

Thanks for the post and link. I prefere not to use the calendar for syncing, because than the entries eat up the screen when I view my calendar appointments. Also, I always felt siunce the Journal has a Phone log category it is more obvious to use it rather than calendar. Also, I make LOT of calls on given days and then my calendar looks like mess between the actual appointments and the phone call. Also, I checked the review section on freeware.com and lot of people complain about the SMS not working (which would be the only feature why I would consider this software). But great addition to the post and thanks for the links.
Karel

You can try MobileArchiver (mobilearchiving.com) - for me works perfectly and puts all call history in journal every sync.

kolibrik said:
I am attaching the rar file. There are two files. One is SmartJournal.exe and the other is SmartJournal Beta.exe Try first the SmartJournal.exe run as admin and compatibility with XP SP2. Sometimes it shows the error that the CallLog.csv cannot be dumped. If that is the case, uninstall the SmartJournal and install the Beta (again as administrator and compatibility mode XP SP2). Maniac had a great forum unfortunatelly that website is no longer active.
Let me know if you have any trouble.
Click to expand...
Click to collapse
If the call history is full, I mean 300 items, there is a great chance that the PC app tries to read the calllogdump.csv on the pda while it is already accessed by the pda (it is written) and therefore paralell reading fails.
Solution: backup call log, and after that, delete some 50-100 entries manually. Sync works then nicely...
Regards, G.

gforg_xda said:
If the call history is full, I mean 300 items, there is a great chance that the PC app tries to read the calllogdump.csv on the pda while it is already accessed by the pda (it is written) and therefore paralell reading fails.
Solution: backup call log, and after that, delete some 50-100 entries manually. Sync works then nicely...
Regards, G.
Click to expand...
Click to collapse
Another possible solution is to run Smartjournal.exe on pc, it copies the dump exe to Device\Temp, and runs, and this creates the csv. Navigate to this folder (My Device\Temp) and make the csv read only.
Running the pc side returns an error on the PDA, but the log will be read and data transferred.
Now remove read only from csv, move to pc, leave only the last entry, delete all the rest, save, move back to PDA.
Run pc side, all should be good now. You will have a lastsync.txt created in the PC folder of Smartsync. Sync finished.
Update:
--------------------------------------
Mobitnt PocketExport does the job for some days, no errors, I think I keep using this app

...

...

...