HHi all...i can't send o recive any files from o to bt ...any solutions ?
i have
radio ver :4.0.13.25_01.14.00
rom ver :2.0.8.0
tnx all
haven't got an SP5 but stumbled across this
http://www.coolsmartphone.com/news2259.html
Cheers,
Jim
tnx Jim, but i have this rom release.. and there isn't solution to send or recive files with bt...grrr....
I don't understand how they can built a bad solution for bt for a singolar and expansive smrtphone....
grrrrrrrrrrrrrrr
hi, you must have the option "recieve incoming beams" turned on and bluetooth must be discoverable. that way it will work. just go to file manager->send>beam and the bluetooth devices will appear on the list.
Hope it helps
wow, it worked
Hey, that is great, bt file transfer worked after I changed that setting (settings, connections, beam, receive incoming beam). I finally succesfully wirelessly transfered files between qtek 8300 and notebook!
THANKYOU!
I doubt this can be done. i-mate ROM's BT even does not support BT file transfer features.
you can beam via infrared, but not via BT.
Correct me if i am wrong!
It does work, and it is cool. I am using a qtek rom though (2.0.9.0).
Related
Good Day to ALL!
I always read in the topics about bluetooth widcomm stacks against ms stacks, and the primary concern is HEADSET/HANDSFREE profiles. Well thats a vey nice function to have IF and WHEN perfected.
Right now, I have the standard bluetooth stack the came with my XDA 2. And I do not have a bluetooth headset or earpiece, my pimary bluetooth concern is SENDING and RECEIVING files over bluetooth, the SENDING PART seems to be OK and can transmit to other phone units (nokia especially but not SonyEricsson). BUT i cannnot receive files from any of these devices.
NOW, if I install the WIDCOMM stack that is available here and can be successfully installed, WILL this allow me to SEND and RECEIVE files to any device via bluetooth?
Thanks, I dont want to install yet coz there might be others out there who already know and I will learn from them and save me the time and effort.
THANKS.
I installed Widcomm 1.4.1 build 58on my 1.60WWE XDAII and I am able to exchange files between both Nokia and SE phones (I've only tried this with smartphones). When using the Widcomm and the MS bluetooth stack you should remember the following:
1. Don't turn both of them on at the same time.
2. BT headset only works with MS Stack
BLUETOOTH - SENDING
I CAN SEND AND RECIEVE AND SEND FILES TO OTHER DEVICES AND PHONES, BUT I CAN NEVER FIND OUT WHO THE SENDER IS WHEN RECIEVING FILES FROM SOMEONE... ON ANY PHONE OR LAPTOP WHEN YOU GET A FILE THROUGH BLUETOOTH IT ASKS DO YOU WANT TO RECIEVE THE FIEL FROM USER "XYZ", WHERE AS ON THE XDAII IT JUST ASKS DO YOU WANT TO RECIEVE THE FILE,,
IS THERE A SOFTWARE OR AN UPGRADE WHERE I CAN FIND OUT WHO THE SENDER IS WHEN RECIEVING BLUETOOTH????
ANYONE HELP ME PLEASE
Re: BLUETOOTH - SENDING
HEX said:
I CAN SEND AND RECIEVE AND SEND FILES TO OTHER DEVICES AND PHONES, BUT I CAN NEVER FIND OUT WHO THE SENDER IS WHEN RECIEVING FILES FROM SOMEONE... ON ANY PHONE OR LAPTOP WHEN YOU GET A FILE THROUGH BLUETOOTH IT ASKS DO YOU WANT TO RECIEVE THE FIEL FROM USER "XYZ", WHERE AS ON THE XDAII IT JUST ASKS DO YOU WANT TO RECIEVE THE FILE,,
IS THERE A SOFTWARE OR AN UPGRADE WHERE I CAN FIND OUT WHO THE SENDER IS WHEN RECIEVING BLUETOOTH????
ANYONE HELP ME PLEASE
Click to expand...
Click to collapse
When such message appears, try to beam smth via bluetooth. The first device appeared will be the sender of the file
chameleon said:
Right now, I have the standard bluetooth stack the came with my XDA 2. And I do not have a bluetooth headset or earpiece, my pimary bluetooth concern is SENDING and RECEIVING files over bluetooth, the SENDING PART seems to be OK and can transmit to other phone units (nokia especially but not SonyEricsson). BUT i cannnot receive files from any of these devices.
Click to expand...
Click to collapse
To receive a file via bluetooth you need to select "Discoverable" mode in bluetooth settings (start-settings-connections-bluetooth). Then, make sure your "beam reception" is checked (enabled) [start-settings-connection-beam-Receive all beams]. Now you can receive any files!
RTFM
I just got my JAM and the MS Stack doesn't work with my Audi MMI System BT. The PDA2K Widcomm stack 1.1 did, but not the JAM. I can partner but no functionality.
Has anyone tried using the MDA II/XDA II BT Tools that helped that devices MS BT Stack with the JAM?
I love the JAM, but the MS Stack has so little menu functions.
yes it works perfect for me ... the same functions in xda2
Having quite same problems with Nokia carkit, after pairing connection dies quickly and doesn't work. Under BT devices menu "set as hands-free" is grayed out and also using bluetooth tools doesn't make difference, the connection screen just disappears quickly when pairing so can't change profile, maybe it's due incompability...
Don't know if it's possible to change BT stack but at the moment this thing sucks...
GPS Navman 4410 on Qtek S100
Sounds like the same problem I have with my GPS-connection (Subject GPS)
Could someone post the Bluetooth Tools file? I can't find it anywhere on my system or on the web.
thanks
Paragon said:
Could someone post the Bluetooth Tools file? I can't find it anywhere on my system or on the web.
thanks
Click to expand...
Click to collapse
http://www.bluetooth.jazztel.es/
Thanks kha!
Tools doesn't work well on my JAM!
Hi!
I´ve tested the Pocket Bluetooth Tools as well, but it doesn´t worked on my MDA compact (German ROM). When the software was installed, the BT doesnt work anymore.
My special problem is with the Royaltek RBT 3000 and the download of the tracks to the pda. Each time i try this, the connection breaks after 200 waypoints approx. The normal use with the navigation software like TomTom works well.
Looking for a solution.
Regards
FluBeX
i had the QTEK 2020 and that worked perfectly, i recently upgraded to an Orange SPV M2000 and i just cannot send any files with bluetooth, on the QTEK 2020 you just press down on what you want to send and select "beam file" and it searches for infrared and bluetooth devices, but my SPV M2000 only picks up infrared and no bluethooth, its wierd because i can recieve anything with bluetooth but jus cant send...
Maybe there is some setting that i must change, i dont know, but can anyone help me or point me in the right direction, any help would be awesome?????
bluetooth problem solved...
well guys i got it sorted out, basically the M2000 comes standard with bt3500 series which for some reason doesnt support "send via bluetooth" ...only in the contacts menu, but it doesnt send files...wierd i know, there is a long way around, if you explore files on a bluetooth device through your bluetooth manager, you can send them that way, but its such a mission...
i downloaded bt3900 series, and now you can press down on any file and it has a "send via bluetooth" option...so problem solved for me, if you have the same problem then i reccomend installing bt3900...you can get it from the link i put below...
http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
Hi,
I have to use a special Bluetooth Tool for my Business. With this Tool I have to send and receive some Files, to make a malfunction detection on Electronic Devices. At my last PDAs, I paired my tool and my PDA at first, and then I create a Serial Connection. After that I have to assign a free incoming and outgoing Comm Port, to send and receive some Data files.
But now I have a Problem on my new XDA Orbit 2 (Polaris) PDA. `This is my first WM6 Device, and on this one, I cannot create an incoming Comm Port, because there is no possibility to create an incoming Comm Port. What can I do, to solve this Problem. Is it possible to add this Feature at the WM6 Bluetooth Stack?
Thank you for Helping!
Nobody with the same Problem?
Does nobody know to fix this Problem? Maybe we only need some File out of the Old WM5 OS, to create an incoming Come Port in the new WM6 OS?
Thank you...
How can any body offer any help without knowing this "special tool"
victoradjei said:
How can any body offer any help without knowing this "special tool"
Click to expand...
Click to collapse
Hi,
The Problem is not the "Bluetooth Stick" called tool. The Problem is, that it is not possible to create an incoming comm Port, on the newer WM6 Devices. But this incoming Comm Port is a necessary Condition, to receive Data from a disturbed machine, through this Bluetooth Stick, onto my PDA. This Data I need for a intelligent error evaluation.
I hope, someone can help...
Perazzi said:
Hi,
The Problem is not the "Bluetooth Stick" called tool. The Problem is, that it is not possible to create an incoming comm Port, on the newer WM6 Devices. But this incoming Comm Port is a necessary Condition, to receive Data from a disturbed machine, through this Bluetooth Stick, onto my PDA. This Data I need for a intelligent error evaluation.
I hope, someone can help...
Click to expand...
Click to collapse
It would be worthwhile to know the brandname of your hardware and specifications of it. There are so many products called "Bluetooth Stick".
---Alex--- said:
It would be worthwhile to know the brandname of your hardware and specifications of it. There are so many products called "Bluetooth Stick".
Click to expand...
Click to collapse
Hi,
The only specitfications about the Bluetooth Stick Tool I is, that it run only under "Master Mode", and not under "Slave Mode", because it` s more security for the Data. And the Master Mode would be work only with an"incomming Port". Sorr, but more Information I could not get from the Manufactor.
Thanky for helping...
Does nobody knows the Answer ?
I'd be intereseted if you ever come up with a solution. I'm trying to create an incoming com port so that I can use GPS2Blue with my car PC. No luck as of yet. I'll post if I find anything.
U cannot create incoming port on WM6 BT stack. But so far i didnt have any problems wits sending/recieving files, comunication with external BT GPS. Al u need 2 do is properly pair devices, properly configure external GPS settings & open outgoing port. Truth is i didnt test ext BT GPS with my Orbit2(o2 branded polaris), but i tryed it w/ Orbit & Universal (both WM6). I can try it today and i'll let U know
phsnake said:
U cannot create incoming port on WM6 BT stack. But so far i didnt have any problems wits sending/recieving files, comunication with external BT GPS. Al u need 2 do is properly pair devices, properly configure external GPS settings & open outgoing port. Truth is i didnt test ext BT GPS with my Orbit2(o2 branded polaris), but i tryed it w/ Orbit & Universal (both WM6). I can try it today and i'll let U know
Click to expand...
Click to collapse
I'm not trying to use external GPS. I'm trying to use a program called GPS2Blue to route the signal from my internal GPS to a car PC via bluetooth. I thought the WM6 BT stack does support SPP, but does not advertise it as a service, thus creating the difficulty in creating SPP connections. I could be wrong though...
u dont need to create incoming port - thats if U want to recieve some data from [another device] with TC data flows 2 TC(tc is recipient) in your case u need too create OUTGOING (TC is sender)
incoming port problem
well I cannot use my bluetooth handsfree for incoming calls on my T-Mobile Vario II.I can make outgoing calls. There is no option in WM6 for creating incoming part.
I have tried diffrent bluetooth sets but no joy.I had no problems with WM5.
Any help will greatly be appreciated.
regards
phsnake said:
u dont need to create incoming port - thats if U want to recieve some data from [another device] with TC data flows 2 TC(tc is recipient) in your case u need too create OUTGOING (TC is sender)
Click to expand...
Click to collapse
Wether a port is incoming or outgoing depends on which device initiates the connection, not which way data flows. For example, in your earlier example of an external BT GPS paired with a Pocket PC, the Pocket PC uses an outgoing connection to the GPS because it initiates the connection, not because data is flowing from the PPC to the GPS.
This is why I need to create an incoming port for my computer to see the PPC as an external BT GPS unit. The mapping program on the computer initiates the connection, then GPS coordinates are sent from the phone to the computer.
I've seen other programs that create their own virtual incoming port. Maybe that is what GPSGate does (I've heard it works for this use).
fairdeal said:
well I cannot use my bluetooth handsfree for incoming calls on my T-Mobile Vario II.I can make outgoing calls. There is no option in WM6 for creating incoming part.
I have tried diffrent bluetooth sets but no joy.I had no problems with WM5.
Any help will greatly be appreciated.
regards
Click to expand...
Click to collapse
incoming or outgoing port doesnt have anything to do w/ btooth headset. Either U have probs w/ Ur ROM or w/ headset.
bedoig: i know that but i didnt know how 2 explain it properly
incoming por
phsnake said:
incoming or outgoing port doesnt have anything to do w/ btooth headset. Either U have probs w/ Ur ROM or w/ headset.
bedoig: i know that but i didnt know how 2 explain it properly
Click to expand...
Click to collapse
well I have two Brand New MDA Vario 2 handsets with offical Tmobile windows mobile 6 rom. Mobile handset cannot be faulty.
As I said it was working fine when it was on WM5.
Bletooth headset work perfectly with other mobile phones including Vario 1 with WM5.
regards
I have Polaris(o2 orbit2) & MotoROKR S9(beckham ed) w/o any probs. but this thread is dedicated to polaris, maybe smth similar was already covered in vario II thread. Try to check there, or post it there.
I have an old Motorola H350 headset and it works fine both ways (incoming/outgoing calls)... so based on your descriptions the incoming port of my Polrais works...
For setting Incoming port you can just simply copy few registry entries from WM5 to WM6.
I have used it for my application smartWatchM. I dont know how it works, but it does.
http://forum.xda-developers.com/showthread.php?t=362218
moneytoo said:
For setting Incoming port you can just simply copy few registry entries from WM5 to WM6.
I have used it for my application smartWatchM. I dont know how it works, but it does.
http://forum.xda-developers.com/showthread.php?t=362218
Click to expand...
Click to collapse
Thank you. You are my Hero...
It`s exact that`s what I need. Now my Bluetooths Device is working fine, and the XDA Orbit2 (Polaris) is the best PDA for my Requirements.
And Greetings to "Schaggo" Member in St. Gallen... Thanks for your good Work.
Is there any chance someone could let me know what those registry settings are? I have the same problem with not being able to create an incoming com port but I don't have a wm5 device to reference at the moment.
Thanks in advance,
-TheXenocide
I did the pairing with my pc and if I send a file from the Magician to Pc I have no problem.
The problem is sending a file from the Pc to the Magician..
are there any fixes?
A similar problem is with my external bluetooth GPS I do the pairing but I get no signal from any COM* port
Do you set "Start->Settings->Connections->Beam" and also BT visibility ON?
Yes. The PC see the "Magician" but then I'm not able to send anything
http://forum.xda-developers.com/showthread.php?t=354198&page=2
It seems that others have problems with WM6.1 and BT GPS.
Does your external GPS work with Magician/WM6.1 ?
I have the same problem with my GPS receptor. How can I solve this problem..???
Please I need help.
NeoMM: are u able to receive a file via BT in the Magician?
I don't want to go back to WM2003!
I think there is a problem with the BT stack on WM6.1, went I try to send a file to the magician it wakes up but no notification is provided (and then "Connection refused" on the pc).
is possible to hack the BT in some way?
assente,
I can send files to other devices, but I can`t receive files from them.
up
How do the others WM6.1/Magician fix the Bluetooth stack?
tomtom doesnt like GPS from BT, but i use Igo 8.3.2 and GoogleMaps and it works well..
Pairing of BT GPS
I can confirm a perfect pairing of Holux 236 and Holux M1000B with the WM6.1 BT set up.
I can confirm a perfect operation with 4 separate GPS software Sirftech, GPS-info, Swedish Hastighetskamror(speed cameras), Swedish pocket kartex.
I can confirm a perfect pairing and file transfer with / to Sonyericson Xperia
I have sofar not tested TomTom.
Please devide your info concerning pairing and operation of GPS software.
P-O
I have fixed the BT GPS issues following the tips on http://forum.xda-developers.com/showthread.php?t=499983
I have fixed my problem with the BT GPS following the tips on http://forum.xda-developers.com/showthread.php?t=499983. But i still having trouble receiving files by BT from other phones. I need help please
Any WWE_O3 users could say something about the Bluetooth?
Does it work now?