I try upgrade the rom from IPL:2.15.0001 SPL:2.15.0001 to IPL:2.21.0001 SPL:2.21.0001, and after upgrade the pocket turn off, now the batery is over (i think) because with energy adaptor is´t turn on but only in the bootloader screen, when i turn on this only display O2 splash and turn off. If i hold power+camera its show bootloader screen but i cant use with usb connection its is connect to energy adaptor.
Sorry my ingles is too bad.
Any body can help me ?
Related
My O2-Xda neo was in Germany IPL/SLP: 2.15.0001
I try upgrade the rom for English, but i get the wrong rom no_vendor_id, and after this its not turn on, this only blink the splash screen of O2 and turn off.
Whem i connect the A/C Adaptor this show the bootloader screen in colours Red, Green and Blue, with IPL/SPL: 2.21.0001 and the usb dont connect because the a/c adaptor is connected, if disconnect the Prophet turn off.
The 3 colour screen is your only hope. Try to get the battery charged and try the USB again. You may flash back the original ROM when in the bootloader(3 colour) mode.
Hey!
I want to downgrade to WM5, after my WM6 won't start up anymore. And since it won't start up i can't sync it with the computer, which means i can't downgrade..
Then i thought i could do it through the boot loader, but if i hold the camera button, and reset the device, using stylus, the screen just blinks black for a second and nothing happens.. It does the same if i take out the battery, hold the camera button and then insert the usb cable..
What can i do ?
~D
U SHOULE HARDSET MOBILE
TURN INTO THREE COLORS MODE
INSERT USB
USE SOFTWARE --------ROMUpdateUtility_NoID.exe
RESTORE 5.0
TEN MINUTES OK
Is there any possible way I can power on my Universal without a battery? Please help I need to do this very badly. Thanks for the help.
If you are near pc, you can just take battery off and plug it in pc using usb.
Works for my Kaiser : )
With battery removed Universal will not stay on even for a second. Without battery only orange light turns on but the device remains shutdown if the cable is connected.
On my Prophet at least, if you plug it in, with the battery, and then start up the device, you can remove the battery and have it running off the Mains...
Universal cannot be tricked that way. It turns off, orange light on, when battery removed after connecting cable. Waiting...........
Help my guys, i can't turn on my Shadow PHOE100, when i try to charge my phone, the orange led in top i blinking, if i try to power on without battery, after the first logo, my phone is turning off...
With battery, i can't eather turn on my phone-!
Is it HARDWARE or i can RE FLASH it-?
Thanks-!
This is the Tornado Forum, no advice her on other devices
You need to go here: http://forum.xda-developers.com/forumdisplay.php?f=425
Hi all
I Have a GT-N8000 today i worked with it some
and locked the screen.
after ye while when in press the power button the screen does not turn on
i Plugged-In the charger but no battery icon or Plug-In sound
i connected the tablet to a pc but no statement from pc for a usb device
i am very sad pls help me((((
Could be a dead battery or power button stuck .
No!
When i locked the screen it was 50%
and i plugged-in the charger from night to morning i don't think it is for battery
(No Download Mode-No Recovery)
Well if you say no then it could be the USB port fried or the mainboard .
PC - usb i presume you have swapped the usb cable and have installed Samsung drivers .
But when i plug in the charger after a while the device will be hot:|
Is the problem still form USB cable?:S