unlockcid s200 - JAMin, XDA Neo, S200 Software Upgrading

I have s200 with last rom 2.2
every time I try to unlock CID I get this message
Initializing............*
DownGrade OS... DO NOT DISCONNECT UNTIL PC Process Finish...
*
Press any key to continue . . .
* This process takes about 12-20 minutes depends on CPU speed
* Please wait...
*
* After 30 minutes if it hang, just press at reset
*
Copying C:\1\itsutils.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
*
* Finish downgrade to 818Prov1
* Soft Reset your 818Pro
* Tap to screen align page, then connect active sync. Wait unitil active start.
* Then run "UNLOCKCID.BAT"
Press any key to continue . . .
and what does unlock CID means?????

Related

HELP! PC Rebooted during ROM Upgrade, now stuck at Boot Loader Only: Now what?

My PC rebooted during the ROM upgrade. Now when I turn on the phone, I get only the Boot Loader (tri-color) screen.
Is there anything I can do, or did I irreparably brick my phone?
Background Info:
* I have (had <sniff>) a T-Mobile (US) SDA
* Info was, as follows, before the upgrade:
*** ROM: 1.0.14.0
*** OPERATOR: 1.9.19.16
*** Radio Version: 4.0.13.20_1.09.00
* Removed my Mini SDcard
* Did a hard reset (to make it a clean SDA)
* Deleted my former ActiveSync relationship
* Established a new ActiveSync relationship (checking no boxes for syncronization)
* Did prep work: App, SIM & CID Unlocked my phone (everything worked fine)
* Rebooted phone one last time
* Rebooted PC
* Started the "c:\i-mate_SP5m_WWE_2.6.331.2.exe"
* Made the ActiveSync connection
* Next, Next accept, etc. etc.
* The ROM Updater started to do it's thing
* The phone rebooted, then got a progress bar
* The Phone got to 55% and the PC rebooted (on it's own, probably got an exception and the handling was set to reboot the PC)
* I've read that the phone won't charge in this state, so I turned it off and removed the battery
Now I can only get into the Boot Loader screen.
Is there anything I can do?!?!?!?!?
Nm!!! Got it!!!
I ignored the requirement for an ActiveSync connection and re-ran the update utility. Everything works great, now!

Big problem

I upgrade my Qteks200 to WM6 and now i have only Booting screen
IPL 2.09
SPL 2.20.0000
GSM 02.47.21
OS 10.2.0.8
nothing happend ...
Log from upgrade:
D:\PPC\step2>UPGRADE_ROM
Start Time: 10:18:17,83
*
* Rom Upgrade to WM6
*
*FOR SPL 2.xx.xxxx ONLY!!!!!, Check SPL before upgrade this rom, at booting scre
en. Your Deivce must have SPL 2.xx.xxxx.
*If SPL is 1.x.x, just upgrade it to lastest Official Rom AKU2
*
* Total process may take about 15-30 minutes depends on CPU speed.
*
* Connect USB and ActiveSync as Guest mode. When everything is ready just press
any key....
Aby kontynuować, naciśnij dowolny klawisz . . .
Initializing.............UPGrade OS to WM6 DO NOT DISCONNECT UNTIL PC Process F
inish...
*
* Start Time:
10:24:02,65
*
* Upgrade OS: This process takes about 12-20 minutes depends on CPU speed
* Please wait...
*
* After 30 minutes if it hang, just press at reset, and upgrade to official rom
at bootloader then re-try again.
*
Copying D:\PPC\step2\itsutils.dll to WCE:\windows\itsutils.dll
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 b5 44 02 05 1c 27 0b 0e 12 0c 05 76
CopyFileToTFFS(os.nb:0, 0, 03900000)
ERROR: ITWriteDisk - Nawi╣zane po│╣czenie zosta│o przerwane przez oprogramowanie
zainstalowane w komputerze-hoťcie.
* End Time
10:25:48,35
*
* Congratulation! (If there is no error message.)
* Finish upgrading
*
Please Hard Reset ***Now***.
(camera button (hold) + voice command button (hold) + soft reset,
after new message display, press dail up botton to format storage
*
* Enjoy Tapping... Good Luck...
Aby kontynuować, naciśnij dowolny klawisz . . .
What i shuld do ??
Do you hard reset your ppc after install? If not, do it
Definatelly hard reset. If you got no results, then reflash again downgrading previously to a 2.20... for instance: no vendor rom.
thx for help...
Now working great.
Hi bros,
I got the same problem with Moonracker. After hard reset:
press Send to restore factory default,
Other keys to quit
Format FAT partition
Format failed
Please help...!!!
Moonracker said:
I upgrade my Qteks200 to WM6 and now i have only Booting screen
IPL 2.09
SPL 2.20.0000
GSM 02.47.21
OS 10.2.0.8
nothing happend ...
Log from upgrade:
D:\PPC\step2>UPGRADE_ROM
Start Time: 10:18:17,83
*
* Rom Upgrade to WM6
*
*FOR SPL 2.xx.xxxx ONLY!!!!!, Check SPL before upgrade this rom, at booting scre
en. Your Deivce must have SPL 2.xx.xxxx.
*If SPL is 1.x.x, just upgrade it to lastest Official Rom AKU2
*
* Total process may take about 15-30 minutes depends on CPU speed.
*
* Connect USB and ActiveSync as Guest mode. When everything is ready just press
any key....
Aby kontynuować, naciśnij dowolny klawisz . . .
Initializing.............UPGrade OS to WM6 DO NOT DISCONNECT UNTIL PC Process F
inish...
*
* Start Time:
10:24:02,65
*
* Upgrade OS: This process takes about 12-20 minutes depends on CPU speed
* Please wait...
*
* After 30 minutes if it hang, just press at reset, and upgrade to official rom
at bootloader then re-try again.
*
Copying D:\PPC\step2\itsutils.dll to WCE:\windows\itsutils.dll
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 b5 44 02 05 1c 27 0b 0e 12 0c 05 76
CopyFileToTFFS(os.nb:0, 0, 03900000)
ERROR: ITWriteDisk - Nawi╣zane po│╣czenie zosta│o przerwane przez oprogramowanie
zainstalowane w komputerze-hoťcie.
* End Time
10:25:48,35
*
* Congratulation! (If there is no error message.)
* Finish upgrading
*
Please Hard Reset ***Now***.
(camera button (hold) + voice command button (hold) + soft reset,
after new message display, press dail up botton to format storage
*
* Enjoy Tapping... Good Luck...
Aby kontynuować, naciśnij dowolny klawisz . . .
What i shuld do ??
Click to expand...
Click to collapse
@ezuanizam - I've had the same problem, you have to enter bootloader mode:
1. Press power button, you will see the screen with system version etc.;
2. Connect Prophet to the computer (usb cable);
3. Press and hold Power Button + CommManager Button + soft-reset device by the stylus;
4. Now you are in the bootloader mode, run on your computer the last ROM-update utility with ROM that worked properly on your device (or another that you are sure works correctly, I've used Jester's AKU3.3 WM5 ROM);
5. Wait until the proper ROM is installed - Prophet should work without any problems.
Hi Solkan,
I have tried to do the steps, but stuck at no "4. Now you are in the bootloader mode, run on your computer the last ROM-update utility with ROM that worked properly on your device"
- i got Error [260] - the connection between my Dopod and my PC can't astablished.
any idea... please...
ezuanizam said:
Hi Solkan,
I have tried to do the steps, but stuck at no "4. Now you are in the bootloader mode, run on your computer the last ROM-update utility with ROM that worked properly on your device"
- i got Error [260] - the connection between my Dopod and my PC can't astablished.
any idea... please...
Click to expand...
Click to collapse
What is your OS
Maybe Vista ?
ezuanizam said:
Hi Solkan,
I have tried to do the steps, but stuck at no "4. Now you are in the bootloader mode, run on your computer the last ROM-update utility with ROM that worked properly on your device"
- i got Error [260] - the connection between my Dopod and my PC can't astablished.
any idea... please...
Click to expand...
Click to collapse
Do you use the newest ActiveSync (ver. 4.5)?
Have you seen the tri-coloured screen of bootloader mode with IPL and SPL numbers? Has there been in the left-bottom corner of the screen written "USB" while your Prophet has been connected to the computer?

Not Connected for Update!

Dear Users
I wanted to Upgrade my Jamin from ASerg .AKU3.13 to PDAVIET TouchFlo 4.0.0.6
After run upgrade_rom.bat an error occuered that disconnected from computer and can't establish the connection...
Then I try to soft reset and Hard reset my Jamin , but only WHITE page appeare and can't detect the PPC via USB to computer.
I try to reinstall ACTIVE SYNC 4.5 in my windows XP but not detect my Pocket pc via USB !
* no bootloader appear(Only White page)
* no usb connection detected
Please help me as soon as possible
Thanks
ebaskar said:
Dear Users
I wanted to Upgrade my Jamin from ASerg .AKU3.13 to PDAVIET TouchFlo 4.0.0.6
After run upgrade_rom.bat an error occuered that disconnected from computer and can't establish the connection...
Then I try to soft reset and Hard reset my Jamin , but only WHITE page appeare and can't detect the PPC via USB to computer.
I try to reinstall ACTIVE SYNC 4.5 in my windows XP but not detect my Pocket pc via USB !
* no bootloader appear(Only White page)
* no usb connection detected
Please help me as soon as possible
Thanks
Click to expand...
Click to collapse
It's easy !
push the Camera button and softreset, don't release camera button until the RGB page appeared then u can Install new ROM
pay attention that Don't release your finger from the camera button OK?
Thanks of me !
Hi! Esbarka,
I followed what you said and the RGB display appeared but it also cannot connect to PC (MActiveSyn not connected). It has the word "USB" at the left-under conner of screen.
Could you intruct me another way to solve this.
Thanks very much!
http://forum.xda-developers.com/showthread.php?t=319206
In these thread you will find the wm6 4.0.0.6 rom
the step1 file Prophet_PV_Temp contains a standard version of wm5 rom that you can/must use as base point to upgrade to wm6
unpack the files in a directory, go to the three colour RGB display and connect USB cable. At these point launch the ROMUpdateUtility_NV_G3.exe (or g4 ... it depends on your prophet model) and follow the instruction.
Happy update.
Eugenio
Follow Instruction
hold and keep pressed cemera button and soft reset.
RGB screen will appear
Follow step 1
where it will get stuct at 85% for some time.
do not sync with active sync once step 1 is complete
then you can go to step 2
let full installation get complete.
then you can sync with your pc.

[Q] Qtek 8310

My phone is only three color mode, if i switch on. I try different rom upgrade but nothing. What i can do?
A little more information is needed:
What does the 3 color screen tell?
What happens if you execute a ROM update?
How do you try to make the ROM update, shipped ROM (which) or a cooked ROM (which)?
Has the device ever worked?
Which ROM was on the device before it got stuck in bootloader (3 color screen)?
Tri-color screen meant by bootloaderit (red, green, blue). When I try to update the ROM, it shows that it would be done, but the re-launch the bootloader all the time. Try a different ROM, which is designed for the HTC Qtek 8310 and the Tornado. WM6, WM61 and WM65. WM5 device worked before, more detailed version i dont know. letter on the screen IPL: 2.00 SPL: 2.00.0009
It seems that the loaded ROM does not succeed to load. If you load a shipped ROM everything outlined below should be done automatically for you, so if that does not work as well, then the device may be broken. So check first if you can load a shipped ROM again.
For cooked ROMs you need to prepare the BINFS to match the size of a ROM before you load it. As you succeed in loading any ROM, the device seems to be CID unlocked already. Check the following:
Connect the device in bootloader mode. Switch off, then keep camera button pressed and insert USB cable.
Disable USB for Active Sync (Connection settings of AS).
startup a terminal program that can connect via USB (e.g. TTerm pro)
connect ot the USB port
press enter
Command prompt appears
enter "info 2" (no quotes) enter
read the last line, it should give something like "HTC SuperCID". If not, then you must CID unlock the device first. Lookup the relevant threads for the cooked ROMs or search for Lokiwiz.
If the device is already SuperCID, then you must match the BINFS formatted size to be larger or equal the ROM size (OS partition). For most cooked ROMs it is the binary file size. Relevant actions are also described in some cooked ROM threads, e.g. mine - see my signature.
What is shipped ROM? Original Rom? I do not have it.
Tera Term
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
HTCSBPT_0501 Lqœ»HTCE
I try unlock SuperCID with program lokiwiz02b.
But nothing happend.
machinagod's HTC Wizard Unlocker v0.2
NOW WITH CID Unlocking POWER!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: c
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
What i try next?
IF your OS is not up, then the lokiwiz will not do anything to your device!
With THIS status you should not succeed in doing any update or format your BINFS. You first need to get the original OS up and running again before you van get any further on changing your OS. The steps to take are:
Get old OS running up again
Application unlock the old OS
CID unlock the device (backup your *.bin files!)
load new OS
1.) is your problem currently. There are several ways to achieve this, try a hard-reset first, this should work for your device:
switch off device
press L+R softkey and hold both
switch on device and keep L+R softkey pressed
wait until prompt and act accordingly
device will reboot to OS
OK now?
I do not have the original OS or even the old OS. After a hard reset as well as the OS does not come up.
# Switch off the Device
# Softkey Press L + R and hold Both
# Switch the device and keep L + R softkey presses
Press 0 to restore factory default. Other key to exit
I press 0
After hard reset load the bootloader again.
OK, then you need to load the CID matching old OS via the shipped ROM standard procedure. Look to: http://www.shipped-roms.com/shipped/Tornado/ and get 8310_2090_253121_020900_to_dan_eur_ship.exe
Execute it on the PC while the device is connected in bootloader mode. If that does not work, then try other ROMs in the same directory until you succeed with the loading.
Mind that a first boot takes 3-5 minutes, so be patient if the bootloader is not coming up any longer. Also do not interrupt the ROM loading in the first steps when the upload has started. It is normal that there are phases where the progress bar does not move. I think the sequence is per partition (IPL, SPL, Splash, OS): load to RAM (bar progressing), load from RAM to ROM = flashing (no bar progress, but color change of bar at the end). The large OS partition is loaded at the end of the sequence so the second step will take some time - be patient.
Good luck!
I try all ROM's but always give me ERROR 294 INVALID VENDOR ID.
And now the phone does not start anymore. No picture. I dont know what happend
This seems to prove that the device has something broken.
Make sure that the battery gets charged while the device is off. Despite the device was connected to USB all the time there is no charging happening in bootloader mode. Wait until the green light is there again before you continue - power drain in bootloader mode is quite heavy.
When none of the shipped ROMs work for upload, it really gets hard to load back an OS running on that for further steps :-(
There is a procedure called "Gold Card method", the rough procedure is (only did that once years back - so this is no step-by-step guide):
Prepare the card so that the bootsector contains the magic device specific "Gold Card" signature. For that you need a trial version of PSAS, and a working windows mobile device(!).
then you would have to load the *.nbh file that gets uploaded to the device (and fails) to that mini-SD card root directory,
rename it to TORNIMG.NBH there
load the card to the device,
then reboot to bootloader (Camera + on)
and hope it gets it loaded
A detailed procedure is described for the Excalibur device but this works equally well for Tornado if you adjust the relevant parts (PSAS is the success of QMAT). Mind that the miniSD card should be in really good condition (fresh full format, check that the file loaded can be read byte-identical from it). If the loading from the card fails or corrupts the IPL/SPL while loading then your device is really bricked. It happened to me with an Excalibur (read the whole thread linked above) - so be extra careful (though - what do have to loose?)!

######## AUTOFLASH - FLASH/ROOT/UNLOCK your phone easy. ALPHA

PLEASE REPORT IF IT WORK OR NOT
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This is only to secure myself from bricks
But i flashed my own phone with that method succesfuly..
I USE XPERIA TIPO SINGLE SIM
Hey Guys.
Im writing a script, with that you can flash your phone very simple.
no need to be a hacker to flash now. LOL
FEATURES
Options for advanced or begginer guide
Rom database -> Best roms and their features, their requirements and how to install + forum URL
Root your phone
Flash Kernel, Rom and Addon ( single or everything together )
Slim program
Easy to use ( you only have to choose 1 or 2 ... )
I update this script so often i can to make everythin right
Some new text will be here soon
If you want to add a rom to the database, send me a message with link to the rom ( only tipo stuff )
//// comming soon :
Unlock the bootloader,
Maybe you take a look at this
Yeah. I know. Not realy designed.. but its still alpha
Noticed that my work dont work when it want to open a new cmd window.
That should be now fixed. Please write what i can make better in this little programm.
Changelog.
V_0.75
Fixed some text.
-----------------------------------------------
Script length : 14319
Script lines : 675
-----------------------------------------------
~ need helper for "design" and testing
V_0.5
Database complete. ( if you know other good roms, write it)
Fixed some text.
added option - flash only kernel
added option - flash only rom
-----------------------------------------------
Script length : 14307
Script lines : 675
-----------------------------------------------
~ need helper for "design" and testing
V_0.4
Added flash option for Kernel, ROM and addon files ( together or single)
Added Advanced option. less text. much faster.
Added a ROM database for great ROMs
-----------------------------------------------
Script length : 12356
Script lines : 475
-----------------------------------------------
~ Not finnished with database.
fixed the biggest bug ever in this program. lol.
Your app dont start :
Podpis problemu:
Nazwa zdarzenia problemu: BEX64
Nazwa aplikacji: Autoflash.exe
Wersja aplikacji: 0.0.0.0
Sygnatura czasowa aplikacji: 4d8c966e
Nazwa modułu z błędem: StackHash_f6f4
Wersja modułu z błędem: 0.0.0.0
Sygnatura czasowa modułu z błędem: 00000000
Przesunięcie wyjątku: PCH_B9_FROM_Autoflash+0x0000000000003CBB
Kod wyjątku: c0000005
Dane wyjątku: 0000000000000008
Wersja systemu operacyjnego: 6.2.9200.2.0.0.256.48
Identyfikator ustawień regionalnych: 1045
Dodatkowe informacje 1: f6f4
Dodatkowe informacje 2: f6f4cca453aab95dfc23266a71916dc2
Dodatkowe informacje 3: 47f5
Dodatkowe informacje 4: 47f59800b903a60c9c69c03635d44aca
Started it in admin mode and compability with win 7 i am on win 8
i dont speak polnish .. so i cant read youe "log" .. sry bro .
can you translate it ?
Waiting anxiously for the unlock bootloader option
Thanks for your hard work
Google translate... Ihre App fangen nicht an:
Problem signature:
Problem Event Name: BEX64
Application Name: Autoflash.exe
Application Version: 0.0.0.0
Anwendung Zeitstempel: 4d8c966e
Störungs-Modul-Name: StackHash_f6f4
Fehlermodulversion: 0.0.0.0
Module Timestamp-Fehler: 00000000
Exception Offset: 0 PCH_B9_FROM_Autoflash x0000000000003CBB
Ausnahme: c0000005
Ausnahme-Details: 0000000000000008
OS Version: 6.2.9200.2.0.0.256.48
Gebietsschema-ID: 1045
Zusatzinformation 1: f6f4
Zusatzinformation 2: f6f4cca453aab95dfc23266a71916dc2
Zusatzinformation 3: 47f5
Zusatzinformation 4: 47f59800b903a60c9c69c03635d44aca
Admin-Modus und Kompatibilität mit win 7 bin ich auf win 8
sorry for the late reply. i was a week not at home ^^
this window opens if you klick on the exe ?
or if you want to flash something.. maybe u can upload a screenshot. or i will give you the unconverted batch file that u can test this

Categories

Resources