Related
I have been using a JABRA BT200 Headset with my XDAII and have always had the same problem, once the BT200 has been paired with the XDAII it works fine but once I put the headset into it's charging cradle and then remove it and try to use it again it always loses it's bond, the only way I can get it to communicate with the XDAII again is to pair it again.
I don't know whether the problem lies with the BT200 or the XDAII
Does anyone else have this problem ???
Thanks
Ian Goulding
hey ian,
it was just recently that i was able to figure out the bt-xda2 bonding; thanks to some helpful chaps in the forum. in the process; i did some research within several topics and read something which may answer your query. when the headset is back in it's cradle; i believe it's "turned off" or is put into inactive mode. the forum message i read indicated that the bonding is lost once the headset is turned off; thus you have to bond again. yes, i have had similar experiences while figuring out the bonding issue. i just keep the bt200 i have out of the cradle; when the time comes to charge it i then holster it and repeat the bonding process once it's charged. i don't think it's a problem with neither devices; it's the default setting i believe. with luck probably the xda-developer guys will come up with a bug fix for this item. which could also include using bt for other than the phone function...like mp3....hint! hint!
cheers
robson
Ian_Goulding said:
I have been using a JABRA BT200 Headset with my XDAII and have always had the same problem, once the BT200 has been paired with the XDAII it works fine but once I put the headset into it's charging cradle and then remove it and try to use it again it always loses it's bond, the only way I can get it to communicate with the XDAII again is to pair it again.
I don't know whether the problem lies with the BT200 or the XDAII
Does anyone else have this problem ???
Thanks
Ian Goulding
Click to expand...
Click to collapse
I've installed Towa's GPS BT patch and the Jabra works perfect.
hey redbull,
what's the Towa's GPS BT patch and where can i find a link?
cheers mate
robson
Towa's gps patch has nothing to do with this...
I'm not sure what you are talking about, but Towa's patch will not solve the Jabra BT200 issue. The more important question to look at here is what version of BT200 you have. If you look on your Jabra BT200 right next to the microphone, there is a combination of letters and numbers, what does yours say? I think the problem has to do with issues in the firmware in the Jabra that were fixed in later versions.
It's usually 2 numbers and a letter on the boom to the Microphone.
I have a 47A and it does not work at all. Also tested a 48A and it doesn't work either.
mine's a 48b. works fine.
Cool, just so we are talking about the same thing, you can turn off the Jabra BT200, and turn it back on, and it still works with the phone? You can charge the headset in it's charger and pull it out and it still works? You can go out of range and then back in range and it still works? You can press the answer phone button on the headset when no call is in progress and then try to make a call and things still work?
Please try these various things and let me know.
I know that the A models are from 2002, and the B models are 2003. So it is possible if yours works with all these scenarios that they fixes or changed something in the 2003 models that allow them to work.
Thanks for your time,
LouisK
I recently purchased a BT 250 with nr. 44B and indeed it works with all the tests you described. (Don't need the BT GPS patch for that)
If only the advanced Headset Profile features would work with the MDA II I would be in heaven...........
Ok, it seems based on feedback I've gotten from several people that any Jabra Freespeak that has a "B" as the last part of it's version number will work correctly, but the "A" models do not. The "B" models according to Jabra are the most recent, and thought they don't admit it, there must have been a change in the firmware that allows the "B" units to work correctly with an XDA2/MDA2/i-Mate that the "A" units don't support.
LouisK
I have a "B" on mine and the same problem of rebonding when Jabra is shut off. I experimented by turning off bluetooth on the i-mate and it still worked. Anyone have ideas of a good headset that will not need rebonding?
I have problems with mine too and its a 16B. Turn the BT headset off and its rebond time again.....
48B works fine for me... can't everyone else just use TOWA's patch... that fixed the problem for others
stryker said:
I have problems with mine too and its a 16B. Turn the BT headset off and its rebond time again.....
Click to expand...
Click to collapse
16B is no good. I've been told that minumum needed is 19B. Below 19B is bluetooth 'handsfree' not 'headset'.
Towa's patch has nothing to do with this. It will not help in this situation. It only applies to Bluetooth Serial Profile, of which the Jabra has none. I have talked to Towa via email to confirm this. For those that installed Towa's patch and said it works, more than likely they didn't have the problem anyway because of the version of Jabra they had.
BT jabra 200/plantronic M3000
Jabra is model 45B, - no nead to repair, Plantronics M3000, no need to repair, but sometimes fails to answer call properly.
Hi 2U all,
I have just purchased a BT200 off Ebay, the number on the boom is 20B. No problems works well , no rebonding problems. Just one wish, it would work with voice. But I will keep praying!
StayLucky Jim :wink:
EMAIL FROM JABRA RE-Bonding Problems with XDA-II
:roll: :roll:
Dear Ian,
Thank you for your e-mail and please accept our apologies for the delay in reply.
We are sorry to hear you are experiencing problems using your JABRA BT200 headset in conjunction with your O2 XDA II.
However, having tested the JABRA BT200 headset with the XDA II, we have encountered the following problems.
When completed charging the headset you will need to synchronise the Headset and the Audio Gateway in your XDA II.
Please follow the steps below:
Select Bluetooth menu> Select Off> Select OK (BT is now disconnected)
Return to desktop (Today view)> Disable BT HS mode> Enable BT HS mode (User
to be prompted to turn On BT radio)>Select OK
Enter BT menu> Select On> Select OK (The XDA II returns to the "Today" view
and will try to synchronise with the HS again.
Check connection by establishing an outgoing call. If no sync - you will need
to re-pair the two devices)
We hope this will solve your problem for you. If you require any further assistance please do not hesitate to contact us again.
Thank you for contacting JABRA Customer Service, Europe
Camilla Vang
Customer Service Representative
GN Netcom, Mobile Division (Copenhagen, Denmark)
Click to expand...
Click to collapse
Seems to me that without actually saying it, JABRA think that the fault lies with the XDA-II!
Regards
Ian Goulding
question?? does the bt200 2.5 work with the imate and a i95c at the same time??
i have two devises an I95cl for nextel not blue tooth and the imate pc phone. i would like if possible to use one headset ?? the bt 2002.5 says it will work for bt phones also?? but will it work at the same time ?? hope iam clear...iam a baby here can you tell
15B, can it be upgraded?
Hello everyone...
I have an MDAII and a Plantronics M3000 BT headset and I have the same pairing problem.
I always have to repair the two divices for them to work...
Any ideas?
Best regards,
Rayan
hi guys,
i saw a cheap bluetooth headset here in the philippines (only around US$45) the brand is Kingcomm, though wasn't able to make it work with my xdaii. anyone tried this already? any info is appreciated. tnx!
amboy
re: kingcomm
i presonally tried using kingcomm bt and it works ! what i did was, i turn on the kingcomm bt headset first then i just select "Discoverable" option in the BT manager and i let O2 do its thing, that's all!
tnx for the info bro!
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose
I have the same problem.
Any solution? Thanks
firering said:
I have the same problem.
Any solution? Thanks
Click to expand...
Click to collapse
not yet.
jose
Reboot the PPC the check..I am using Jabra 8010 without any problems
Thanks for your suggestion~
But I reboot many many times~
But still fail~
Same problem here
Headset = Bluetrek G2
I can answer calls with it, but ppl can't hear me
hs 820 ,same problem
i have bt8oo and it works fine , any problem .
firering said:
I have the same problem.
Any solution? Thanks
Click to expand...
Click to collapse
Also,this problem happen in i-tech R35d
All, I had problems with every WM6 rom, varying in seriousness. However, this one meant you can't use it at all (Blutrek G2). So I bit the bullet and bought a HBH-PV700 fo 19.99ukp. Have had no problems since.
Bluetooth problem
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose
The Bluetooth needs serious work
Hey ,
I've been using Nokia BH-900 headset and the vioce quialty etc is fine the only problem i am facing is that every few hours the connection just drops and i have to reconnect the bluetooth headset. Also BTGPS is not just working for tomtom or co pilot.
Any suggestions on how it would be possible to use one of the older bluetooth stacks from the original roms would be a great help.
Thanks
We have two families of wm6 roms: universal specific (Indra, Helmi, Jwright, Pdaviet up tu 08) and Athena derived (DarkForce and latest Pdaviet). Bluetooth on them share the same problem present in aku1.x original universal rom: after a random number of houres it turns off and up to now we don't know why?
Plantronics Discovery™ 640 - the problem is the same.
josedias said:
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose
Click to expand...
Click to collapse
same problem with all wm6
bluetooth and probs
well hope there is some serious discussion going on in the big wigs for the bluetooth stacks. All of you are using lots of energy in between the 2 stacks of Microsoft and Widdcomm. Personally I prefer widdcomm but please get atleast one of them working for sure with everything
BTW the nokia headsets are working fine with all the WM6 versions I have used. Only the BT goes off after sometime with the blue light still flashing and then even the nokia cant do much.
Any help is worth a million
on my side the problem was with a parrot. It was solved after change the power off when running on batteries on the pda. Now it connects ever.
beginner said:
on my side the problem was with a parrot. It was solved after change the power off when running on batteries on the pda. Now it connects ever.
Click to expand...
Click to collapse
Isn't that due to the fact BT switches off when the uni switches itself on with incomming calls comming out of hibernation
I have searched the tornado forum for a answer to this but t no avail. Does anyone have a fix that will allow Skype to use the bluetooth headset? Now some say it is a stack issue but I was wondering then why my Dell Axim x30 with no modifications easily uses the headset. Possibly they use there own stack. Anyway is there an answer or is it useless? Thanks for any help that you can give me, i am headed to england and really wanted to get this to work.
you have to use BTARouter app - works nice, but you have to disable A2DP profile first
Try CeleTask 2.2 which got bluetooth audio function.
Thanks for all the help! bsider where can I find BTAudio Router? I have found a toggle program that does not work and I trie Bluemusic 2.0 but the trial does not work for me so i am not about to buy it. i will look at CELE 2.2 right now.
Thanks
Ok Got BTArouter and it works, but when I have the sound routed to the headset the mic does not work so i cannot talk. Is there a fix for this? Am I missing something? So neither the headset mic or the internal mic works. I am leaving the country soon and would love to get this working.
Thanks
recordsmith said:
Ok Got BTArouter and it works, but when I have the sound routed to the headset the mic does not work so i cannot talk. Is there a fix for this? Am I missing something? So neither the headset mic or the internal mic works. I am leaving the country soon and would love to get this working.
Thanks
Click to expand...
Click to collapse
for me MIC works ok with BTArouter and Fring. I'm using SE DS-970 headset, and you?
i am using the new jawbone headset. Could it be that they are not compatible? This skype thing is looking moar and more bogus. I will try with another headset.
Everything has been fixed. Fring was the answer. Thank you for all your help!
I had a problem with the handsfree headset delivered with the S200.
2 seems to be available in ebay, but with very long delivery time.
I also tried my son's HTC HD headset, but it doe not seem to work
Has anyone identified a suitable replacement that would support both the headset function and the push to talk handsfree functions ?
Thanks in advance
Hi,
I have a problem with my Acer S200 and my SonyEricsson HCB-300 bluetooth car kit. I want to start a call from the SE hcb-300 call button and use voice dial(Vito), but it doesnt work with the s200. What can i do? Help me, please.
#1 i know that this is a dead thread but just for the heck of it+
headsets are universally compatible. u can use iphones,bbs,nokia. tested and all is fine.
crosstest said:
I had a problem with the handsfree headset delivered with the S200.
2 seems to be available in ebay, but with very long delivery time.
I also tried my son's HTC HD headset, but it doe not seem to work
Has anyone identified a suitable replacement that would support both the headset function and the push to talk handsfree functions ?
Thanks in advance
Click to expand...
Click to collapse
If you have phonex as replacement dailer then you have to disable "lock hardware buttons". Otherwise you can't accept a call when pressing on the headphone button.
I tried the following BT headsets SE HBH-PV715 and Nokia BH-105. And they both have the same sympton when lock hardware buttons is enabled in Phonex.