Artemis ROM on Prophet - JAMin, XDA Neo, S200 Software Upgrading

I wonder how the Prophet would function with Artemis's ROM loaded. It should work just like the way the Wizard's ROM worked on the Prophet. It would need some modifications (and software removal) but maybe its a good direction (they both have the same CPU).
Has anyone studied Artemis's rom structure?
Any comments?

andrew_sh said:
I wonder how the Prophet would function with Artemis's ROM loaded. It should work just like the way the Wizard's ROM worked on the Prophet. It would need some modifications (and software removal) but maybe its a good direction (they both have the same CPU).
Has anyone studied Artemis's rom structure?
Any comments?
Click to expand...
Click to collapse
After just trying the Artemis Radio Rom, I am willing to step out on a limb and say it probibly will not work. The Artemis Radio is very similar to the Prophet but it would not work at all. But I did have fun breaking down the ROM to snatch out the radio...maybe its time for a new project...

Related

Possible to make your own ROM ?

Hey!
I was wondering if it was possible to make you own rom ? I mean.. For an example take the WM6 Smart1 rom for the Qtek S200 and then take some apps and put them inside the rom so they installs with the rom when that intalls? And maybe define some settings like GPRS settings, so they allready are configured when the rom is just installed?
Thank you!
~D
yes it is possible, there are tutorials within the threads for each device, probably titled 'cook your own rom' or something similar. i assume it's different for each device due to hardware differences so there is no generic solution
Okay thanks for answer !
I have been searching the forums and found some usefull stuff i think.. But as i see it, it looks to advanced for me .. Afraid of bricking my phone ! Have just installed WM6 on my prophet and that allmost made me sick because i was afraid of bricking my phone..
So maybe cooking is a bit to advanced for me..
Unless there is a more simple way ?
no it's complicated, try looking for extended rom cooking it may be simpler

Help?

I've been trying to get help on another thread but no one is helping.These cabs are mainly ment for WM6, but is there a way to patch these for WM5? Check out the link here:
http://forum.xda-developers.com/showthread.php?t=331955
Thanx! =)
Umm upgrade to Wm6.
Toodeep said:
Umm upgrade to Wm6.
Click to expand...
Click to collapse
I agree. It is time to upgrade my friend... There are so many roms out there that are almost 100% stable with everything working and not all of them include all of the extra crap either... If you wanted to keep the same general look going on and not the touchflo if thats what you're trying to avoid, then look into some of the professional roms instead of the touch roms.
A good example is TNT5.0 Professional. It has all the amendaties of WM5 but also supports all of the WM6 software.
...Thats my opinion anyway
I have
I've updated to WM6 many times with multiple roms, but they tend to lag in performance. Though one rom looks promicing is this one here:
http://forum.xda-developers.com/showthread.php?t=331812
BUT! It's a Hermes rom and I have no Idea how to flash that onto a wizard. So instead of risking my Wizard to brick, I was hoping someone could possibly patch those cabs for WM5.
If anyone is looking for a little project, please patch those cabs on the first post.
Thank you
i use TNE with over clocking, with no problems. just as fast as wm5 if not faster.
touch no evil.
and dont flash a wm6 rom that wasnt built for the wizard.
Artzmaster01 said:
I've updated to WM6 many times with multiple roms, but they tend to lag in performance. Though one rom looks promicing is this one here:
http://forum.xda-developers.com/showthread.php?t=331812
BUT! It's a Hermes rom and I have no Idea how to flash that onto a wizard. So instead of risking my Wizard to brick, I was hoping someone could possibly patch those cabs for WM5.
If anyone is looking for a little project, please patch those cabs on the first post.
Thank you
Click to expand...
Click to collapse
give this rom a try. It was originally made by its right but I personally modified it to have a larger page pool and is quite fast.
It is a touchflo rom though... Not sure how fond you are of those style roms...
http://www.megaupload.com/?d=TM2N1W2R
???????????
Well does anyone just have the base WM6 rom that I can flash? Nothing custom, just the standard, factory WM6 rom? Cuz that would be the only way I would be willing to upgrade. If not then I just want the cabs to work on WM5.
Artzmaster01 said:
Well does anyone just have the base WM6 rom that I can flash? Nothing custom, just the standard, factory WM6 rom? Cuz that would be the only way I would be willing to upgrade. If not then I just want the cabs to work on WM5.
Click to expand...
Click to collapse
Well there is TNT Official... It's the closest to an actual OFFICIAL Wizard WM6 rom as you are going to get...
Install that(it is CLEAN, nothing on it really) and you can install anything you want if you're not interested in a custom rom.
You could also give this a once over...
*Updated 9/27/07 8:30am* BETA TESTERS NEEDED! The Real Official WM6 OS

I wan to upgrade my Uni to WM6. Please help me!!!!

im pretty new at all this but ive got a good grasp of PPCs but when i read through these threads i just cant make sense of some of it.
So, can someone explain (simply) which ROM should I download to upgrade my Universal from WM5 to WM6 and do I have to use that UniversalRUU program do it?
Please please help me.
stevedotcom said:
im pretty new at all this but ive got a good grasp of PPCs but when i read through these threads i just cant make sense of some of it.
So, can someone explain (simply) which ROM should I download to upgrade my Universal from WM5 to WM6 and do I have to use that UniversalRUU program do it?
Please please help me.
Click to expand...
Click to collapse
Look here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
It's all very well explained.
As to which version of wm6 should put, it depends on you.
Greetings.
I use the crossbow 2.12.08 version. Initially with radio 1.15 then upgraded to radio 1.18.
Reason is that roaming with radio 1.18 seems to be better. but so far is seems only more unstable.
However the Crossbow is very nice and I can not find any major problems.
Very satisfied and been using it for some months now.
The link is easily found on this forum and after the download you simply connect the pda to your computer, unzip the program on your computer and run the application.
the rest is easy. no big issues or special knowledge required.
note my pda already was unlocked
just give it a try !
or download some wm6 and wm5 versions and try each one.
the installation is easy and more or less the same. probably best start trying the wm5 and then move on to wm6
good luck!

Flashing X7510 with SPA X7500 ROM.

I read, search and more...
I have flashed once an X7501 with X7500 spanish original ROM, and everything worked out.
Now, does any one knows if I can flash a X7510 with the same spanish ROM for X7500?
If no one knows I would try it, but if some one know if it would do no good, please tell me before I try. Or if you know it's ok, please also let me know.
If no one knows, where's an x7510 WWE rom that I could flash to have it as it once was?
Regards.
I'm going to go out on a limb and predict that flashing a 7510 with a 7500 ROM is a bad idea.
larsuck said:
I'm going to go out on a limb and predict that flashing a 7510 with a 7500 ROM is a bad idea.
Click to expand...
Click to collapse
Could you share why do you believe?
Any experience with other devices?
(yes, there's this problem with elf and elfin, but I think it was the orher way)
Baad idea!
There is one user who did it already. He was clever enough to use rom for SPL 3.5, (SPL 1.2 would brick x7510 totaly), but he lost the access to his 16MB SSD drive (Flash Drive). Except that his Athena was OK. He used AP 4.0 ROM.
The problem is that all roms for x7500/x7501 have driver for 8MB Microdrive instead of driver for 16MB SSD, which is on board of x7510.
If anybody can give a clue how to get the driver for 16MB SSD, we could go on.
Yup, thanks.
I read earlier today about that. I'll dump spanish rom directly from x7510 then.

Flashing an AT&T tilt with an Official HTC Rom

Hello,
I have recently bought a AT&T Tilt, and would like to flash to the current Offcial HTC WM 6.1 ROM.
I have done alot of reading in the wiki here and various FAQ threads and what not. But i am still a bit confused with a few things.
I have read the ROM Flashing faq and Intro here:
http://forum.xda-developers.com/showthread.php?t=356895
And i understand all that.
I also undestand that i need the Key board fix from here:
http://forum.xda-developers.com/showthread.php?t=334911
But thats not hard.
I went here:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
I checked my device and the rom currently on it is the AT&T WM6.0 1.57.502.2 Original Shiped Rom.
I figured, being in Australia, i would need rom that had WWE as the country? So i downloaded the "RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship" rom. Is this an appropriete ROM for what i want?
BUT Its all this stuff about SPL's and what not that is confusing me.
My Tilt is SIM unlocked because i am using it on the Telstra network here in Australia. But im not sure if i have to change SPL's or not and if so, which spl i need and how to change it?
It would be greatly appreciated if someone was able to help me understand this SPL bussiness, because i really dont want to dive straight in a risk my device. I have done a fair bit of reading and i'm a fairly competent computer user so it won't take me long to learn.
Thanks in advance,
eMiller
you have to CID unlock it. this involves flashing the device with HardSPL then running a unlocker program. (this is what i know from Hermes, so i don't know if it is exactly the same on Tilt). It breaks the warranty though, so think first, then jump
by the way, you should try a cooked rom. in my experience, HTC roms are not that good, except for getting a stable radio. get the radio, then get a new OS rom, like hang.tuah or something.
warsng said:
you have to CID unlock it. this involves flashing the device with HardSPL then running a unlocker program.
Click to expand...
Click to collapse
Ok thanks. Can someone please recomend the best hardSPL and unlocker program for my needs. What do other people with Tilts recomend?
here you go
eMiller12 said:
Ok thanks. Can someone please recomend the best hardSPL and unlocker program for my needs. What do other people with Tilts recomend?
Click to expand...
Click to collapse
Try this one:
http://forum.xda-developers.com/showthread.php?t=334679
Look for the Zip file at the very bottom of the screen this hard spl will let you flash any rom (follow the instructions the spl gives you exactly and dont get nervous if it appears stiuck for a bit), just make sure you know which ROM you really want to flash at the end
.
Again same stuff.
Guys, when you gonna learn to read everything which is realted to your device when you want to do something?
Everything is in Wiki, everything you need is posted in ROM threads.
Come on GUYS!
read the f**** wiki. you need hardspl. its not that hard to figure out if your not an imbisel
@joel2009: That is a little harsh. Also, if you're going to call someone an imbecile, you should probably spell it right.
@eMiller12 (fellow noob): I don't know if I would bother with the HTC ROM, I just flashed it and I am finding a few really annoying bugs... Read Jocky's STICKY post about the HardSPLs to learn how to flash one. It really is quite simple--and it's unlikely that you're going to brick your device, so no worries.
Hey FireMedic, thanks for understanding.
I have read through the Wiki a fair bit, i was just unsure which versions of hardSPL etc where best for the [email protected] Tilt inparicular. But i will just use this one that vorostatz recomended if that is the best one for the tilt.
joel2009 said:
read the f**** wiki. you need hardspl. its not that hard to figure out if your not an imbisel
Click to expand...
Click to collapse
We are not all senior members. I can fully understand the guys wish not to turn his expensive device into a paperweight. Ease up eh?
search forums using google (at top right)
yeah, exactly... I was pretty scared to hardspl when I first started.
Hardspl 3.29 seems to be the best one, check my signature after you've read the hardspl sticky.
From what I understand, a rom flash might try to write a different spl which is obviously bad. hardspl prevents this.
If you ever need to, you can undo it. Kyphur explains in the hardspl sticky how to change them, by running a program named jumpspl 1.56 (on your device) with your sim and sd cards out and then flashing the spl normally.
Just make sure you follow directions for your device and try different roms.
Good luck and feel free to ask questions, even if some of the people here have heard them way too often.
Special ROMs for Australia
eMiller12 said:
I checked my device and the rom currently on it is the AT&T WM6.0 1.57.502.2 Original Shiped Rom.
I figured, being in Australia, i would need rom that had WWE as the country? So i downloaded the "RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship" rom. Is this an appropriete ROM for what i want?
Click to expand...
Click to collapse
Actually the WWE (World Wide English) one seems to be used more in Europe and this side of the world. For down-under, they use SEA South East Asia versions. There are issues with ROM compatibility in Australia specifically (at least in the WM 6.0 days) so if you want to know the best official WM 6.0 and 6.1 ROMs, short of searching for what setups Australian xda-dev forum members are using, you could look at the devices on sale in the shops. If you're wanting WM 6.1 just to have the latest and greatest, think again and have a look at the Windows Mobile 6 vs. Windows Mobile 6.1 thread.
***Edit*** Also note that there are two Australian specific ROMs in the WM 6.0 section of the Kaiser HTC ROM wiki

Categories

Resources